Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
2K views

Engineering Graphics

This document outlines the syllabus for an Engineering Graphics course. It covers topics such as engineering curves, loci of points, projections of points and lines, projections of planes and solids, development of lateral surfaces, orthographic projections, and isometric projections. Key areas include construction of conics, cycloidal curves, and involutes; projections of objects with different orientations; true shapes and lengths of sections; and converting between orthographic and isometric views. Recommended textbooks are also provided.

Uploaded by

davies
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
2K views

Engineering Graphics

This document outlines the syllabus for an Engineering Graphics course. It covers topics such as engineering curves, loci of points, projections of points and lines, projections of planes and solids, development of lateral surfaces, orthographic projections, and isometric projections. Key areas include construction of conics, cycloidal curves, and involutes; projections of objects with different orientations; true shapes and lengths of sections; and converting between orthographic and isometric views. Recommended textbooks are also provided.

Uploaded by

davies
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

GUJARAT TECHNOLOGICAL UNIVERSITY

Engineering Graphics

1. Introduction to Engineering Graphics, Drawing instruments and accessories, BIS - SP


46. Use of plane scales and Representative Fraction.

2. Engineering Curves: Classification of Engineering Curves, Construction of Conics,


Cycloidal Curves, Involutes and Spirals.

3. Loci of Points: Path of the points moving on simple arrangements and simple
mechanisms, slider crank mechanism, four bar chain mechanism etc.

4. Projections of Points & Lines: Introduction to principal planes of projections, Projections


of the points located in same quadrant and different quadrants, Projections of line with
its inclination to one reference plane and with two reference planes. True length of the
line and its inclination with the reference planes.

5. Projections of Planes: Concept of different planes, Projections of planes with its


inclination to one reference plane and with two reference planes. Concept of auxiliary
plane method for projections of the plane.

6. Projections of Solids & Section of Solids: Classification of solids. Projections of solids


like Cylinder, Cone, Pyramid and Prism with its inclination to one reference plane and
with two reference planes. Section of such solids and the true shape of the section.

7. Development of Lateral Surfaces: Concept of development of the different surfaces.


Parallel Line Development and Radial Line Development.

8. Orthographic Projections: Principle of projection, Principal planes of projection,


Projections from the pictorial view of the object on the principal planes for View from
Front, View from Top and View from Side using first angle projection method and third
angle projection method, Full Sectional View.

9. Isometric Projections and Isometric View or Drawing: Isometric Scale, Conversion of


orthographic views into isometric projection, isometric view or drawing.

NOTE: Topic No. 1, 8 and 9 of the above syllabus to be covered in Practical Hours.

Text Books:
1. A Text Book of Engineering Graphics By P.J.Shah
S.Chand & Company Ltd., New Delhi
2. A Text Book of Machine Drawing By P.J.Shah
S.Chand & Company Ltd., New Delhi
3. Elementary Engineering Drawing By N.D.Bhatt
Charotar Publishing House, Anand
4. Geometrical and Machine Drawing By N.D.Bhatt
Charotar Publishing House, Anand

Reference Books:
1. Engineering Graphics – I and II By Arunoday Kumar
Tech – Max Publication, Pune
2. Engineering Drawing & Graphics using Auto CAD 2000 By T. Jeyapoovan
Vikas Publishing House Pvt. Ltd., New Delhi
3. A text book of Engineering Drawing By R.K.Dhawan
S.Chand & Company Ltd., New Delhi
4. A text book of Engineering Drawing By P.S.Gill
S.K.Kataria & sons, Delhi
5. Engineering Drawing with an Introduction to AutoCAD By D.A.Jolhe
Tata McGraw-Hill Publishing Co. Ltd., New Delhi
6. Computer Aided Engineering Drawing, S. Trymbaka Murthy
I.K.International Publishing House Pvt. Ltd., New Delhi

You might also like