30XA/XQ

Air-Cooled Liquid Chiller

Reversible Air-to-Water Heat Pump
/PNJOBM
DPPMJOH
DBQBDJUZ
L8ἷ9"Ἰ
/PNJOBM
DPPMJOH
DBQBDJUZ
L8ἷ92Ἰ
/PNJOBM
IFBUJOH
DBQBDJUZ
L8ἷ92Ἰ
 Turn To The Experts
Founded by the inventor of modern air conditioning, Carrier is the world’s

leader in high-technology heating, air-conditioning and refrigeration solutions.

Carrier experts provide sustainable solutions, integrating energy-efficient

products, building controls and energy services for residential, commercial,

retail, transport and food service customers. Carrier is a part of UTC Build

ing & Industrial Systems, a unit of United Technologies Corp., a leading

provider to the aerospace and building systems industries worldwide.

With a broad portfolio of advanced technical patent awards, our global R&D

center in Shanghai develops innovative heat, ventilation and air-conditioning

(HVAC) solutions.

In 1998, Time magazine named

Dr. Carrier oneof its 20 most
influential builders and titans of
the 20 th century.
 The Aquaforce liquid chillers are the premium solution for industrial and
commercial applications where installers, consultants and building owners
require optimal performances and maximum quality.

Benefits

Extremely high full load and part load energy efficiency leads to extremely low
operation cost.
Low operating sound with no intrusive low-frequency noise, creates a better
working/living environment.
Environmentally sound refrigerant HFC-134a of zero ozone depletion potential.
Easy and fast installation to reduce on-site installation time.
Exceptional endurance tests ensure superior reliability to minimize chiller down-time.

Economical operation

Extremely high full load and part load energy efficiency:

- New twin-rotor screw compressor equipped with a high efficiency motor and a va-
riable capacity valve that permits exact matching of the cooling capacity to the load.
- Flooded multi-pipe evaporator to increase the heat exchange efficiency, confi-
gured with aluminium cladding (standard) to improve thermal insulation and
prevent energy loss.
- Electronic expansion device allows operation at a lower condensing pressure and
improved utilization of the evaporator heat exchange surface (superheat control).
- Economizer system with electronic expansion device permits a considerable
increase in cooling capacity and contributes to optimised energy efficiency of
the chiller installation.
- DX free cooling system developed for building that require year-round cooling
and in the coldest regions increase energy efficiency and significant energy
savings (EER~15 to 30).
- Average COP of 3.2 at nominal conditions and average integrated part load
value (IPLV) of 4.4.

Economizer system DX free cooling system

Quiet operation

Compressors
- Discharge dampers integrated in the oil separator (Carrier patent).
- Acoustic compressor and oil separator enclosures (option) reduce theradiated noise.
Condenser section
- Condenser coils in V-shape with an open angle, allows quieter air flow across
the coil.
- Low-noise Flying Bird fans (Carrier patent) enjoy quieter operation andnever
generate intrusive low-frequency noise.
- Rigid fan mounting preventing start-up noise (Carrier patent).

New twin screw CARRIER compressor

2
 Environmental sound

HFC-134a refrigerant
- Refrigerant of the HFC group with zero ozone depletion potential.
Leak-tight refrigerant circuit
- Reduction of leaks as no capillary tubes and flare connections are used.
- Verification of pressure transducers and temperature sensors without trans-
ferring refrigerant charge.

a
Easy and fast installation

Integrated hydronic module (option)

- Single or dual pump (as required) with operating time balancing and automa-
tic changeover to the back-up pump if a fault develops.
- Water filter protecting the water pump against circulating debris.
- High-capacity membrane expansion tank ensures pressurization of the water circuit.
- Thermal insulation.
- Pressure gauge to check filter pollution and measure the system water flow rate.
- Water flow control valve.
Simplified electrical connections
- Main disconnect switch with high trip capacity.
- Transformer to supply the integrated control circuit (400/24V).
Fast commissioning
- Systematic factory operation test before shipment.
- Quick-test function for step-by-step verification of the instruments, expansion
devices, fans and compressors.

Absolute reliability

Screw compressors
- Industrial-type screw compressors with oversized bearings and motor cool-
ed by suction gas.
- All compressor components are easily accessible on site minimizing down-time.
- Electronic motor protection against overloads and power supply faults (loss
of phase, phase reversal).
Evaporator
- Thermal insulation with aluminium cladding for perfect resistance against
outside aggression(mechanical and UV protection).
Exceptional endurance tests
- Partnerships with specialised laboratories and use of limit simulation tools
(finite element calculation) for the design of critical components.
- Transport simulation test in the laboratory on a vibrating table. The test is
based on a military standard and equivalent to 4000 km by truck.
- Salt mist corrosion resistance test in the laboratory for increased corrosion
resistance.

LWT

Compressor ON

Adjustable control deadband

Set point

Compressor OFF

Cooler aluminium protective cladding

3
Technical Insight

Touch Pilot Control

General Features The f ollowing commands/visualizations a re possible from remote

New innovative smart control features: connection:
- An intuitive and user-friendly, 5" colored interface (7" as option) - Start/Stop of the machine
- Screen-shots with concise and clear information in local languages - Dual set-point management: Through a dedicated contact is possible
- Complete menu, customized for different users (end user, service to activate a second set-point (example: unoccupied mode)
personnel and Carrier-factory technicians) - Demand limit setti ng: To limit the maximum chiller capacity to a
- Easy access to the controller box with touch screen mounting to predefined value
ensure legibility under any lighting conditions - Water pump control: These outputs control the contactors of one/tw o
- Safe operation and unit setting: password protection ensures that evaporator water pumps
unauthorized people cannot modify any advanced parameters - Operation visualization: Indication if the unit is operating or if it’s in
- Simple and “smart” intelligence uses data collection from the stand-by (no cooling load)
constant monitoring of all machine parameters to optimise unit - Alarm visualization
operation
- Night-mode: Cooling capacity management for reduced noise level. Remote Management (EMM option)
The E nergy Management M odule (EMM) o ffers extended r emote
Energy management:
control possibilities:
- Internal time schedule clock controls chiller on/off times and operation
- Room temperature: Permits set-point reset based on the building
at a second set-point
indoor air temperature (if Carrier thermostat are installed)
- The DCT (Data Collection Tool) records the alarms history to
- Set-point reset: Ensures reset of the cooling set-point based on a
simplify and facilitate service operations
4-20 mA or 0-10 V signal
- Demand limit: Permits limitation of the maximum chiller power or
Remote Management (Standard)
current based on 0-10 V signal
Units with Touch P ilot control can b e easily accessed from the
- Demand limit 1 and 2: Closing of these contacts limits the maximum
internet, using a PC with an Ethernet connection. This makes remote
chiller power or current to two predefined values
control quick and easy and offers significant advantages for service
- User safety: This contact can be used for any customer safety loop;
operations.
opening the contact generates a specific alarm
- Ice storage end: When ice storage has finished, this input permits
Equipped w ith an RS485 serial port that o ffers m ultiple remote
return to the second set-point (unoccupied mode)
control, m onitoring and d iagnostic possibilities. W hen networked
- Time schedule override: Closing of this contact cancels the time
with o ther C arrier equipment t hrough the CCN ( Carrier C omfort
schedule effects
Network - proprietary protocol), all components form a HVAC system
- Out of service: This signal indicates that the chiller is com
pletely out
fully-integrated and balanced t hrough one o f the Carrier’s network
of service
system p roducts, like the Chiller System M anager o r the Plant
- Chiller capacity: This analogue output (0-10 V) gives an immediate
System Manager (optional).
indication of the chiller capacity
The 30XA/XQ also communicates with other building management
- Alert indication: This volt-free contact indicates the necessity to
systems via optional communication gateways.
carry out a maintenance operation or the presence of a minor fault
- Compressors running status : Set of outputs (as many as the
compressors number) indicating which compressors are running.

4
Operating Range, 30XA

Cooling mode
Evaporator Min.temperature Max.temperature

Entering water temperature (at start) - 45˚C

Entering water temperature (during operation) 6.8˚C 21˚C

Leaving water temperature (during operation) 3.3˚C 15˚C

Condenser Min.temperature Max.temperature

50**
(for 30XA0252~1502)****
Outdoor air temperature -10*˚C
46***
(for 30XA0652~1392)****

* With PT028 "winter operation", outdoor air temperature may down to -20°C. A glycol/water solution or evaporator anti-
freeze protection must be used if the air temperature is below 0°C
** Max 55°C during part load operation.
*** Max 50°C during part load operation
****30XA0252~1502 - 30XA0252/0302/0352/0402/0452/0502/0602/0702/0752/0852/0902/1002/1352/1502
30XA0282/0342/0442/0482
30XA0652~1392 - 30XA0652/0712/0762/1052/1152/1252/1312/1392

Operating range

30XA0252~1502 30XA0652~1392

55

50
E n te rin g a ir te m p e ra tu re, °C

E n te rin g a ir te m p e ra tu re, °C

45

40

35

30

25

20

15

10

-5

-10

. 3.3 7 10 15
Evaporator leaving water temperat ure, °C

Legend

Part load

Operating range, standard unit.

Below 0°C air temperature the unit must either be equipped with the evaporator frost protection
option (41A or 41B), or the water loop must be protected against frost by using a frost protection
solution (by the installer).

Operating range, unit equipped with PT028 “winter operation”. In addition the unit must either
be equipped with the evaporator frost protection option (41A or 41B), or the water loop must
be protected against frost by using a frost by using a frost protection solution (by the installer).

5
 Operating Range, 30XQ

Cooling mode

Water heat exchanger (Evaporator) Min.temperature Max.temperature

Entering water temperature (at start) - 45˚C

Entering water temperature (during operation) 6.8˚C 21˚C

Entering water temperature (during stop) 3˚C 55˚C

Leaving water temperature (during operation) 4˚C 15˚C

Air heat exchanger (Condenser) Min.temperature Max.temperature

Outdoor air temperature -10˚C 46˚C

Heating mode

Water heat exchanger (Condenser) Min.temperature Max.temperature

Entering water temperature (at start) 3.4˚C 50˚C

Entering water temperature (during operation) 25˚C 50˚C

Entering water temperature (during stop) 3˚C 55˚C

Leaving water temperature (during operation) 30˚C 55˚C

Air heat exchanger (Evaporator) Min.temperature Max.temperature

Outdoor air temperature -10˚C 21˚C

Operating range - cooling mode Operating range - heating mode



D UH ƒ&

(QWHULQJ DLU WHPSHUDWXUH ƒ&


(QWHULQJ DLU WHPSHUXW

 

 
 


  


   
  
 


/HDYLQJZDWHUWHPSHUDWXUHƒ & /HDYLQJZDWHUWHPSHUDWXUHƒ &

6
Unit with Cu/Al condenser coil
30XA 0252 0282 0302 0342 0352 0402 0442 0452 0482 0502 0602 0652 0702
Nominal cooling capacity* kW 274 278 299 328 327 391 444 452 493 503 619 644 674
Compressor input power kW 80.5 78.8 87.9 90.5 93.0 113.7 133.7 129.8 143.3 141.3 175.3 187 188.8
EER 3.05 3.19 3.08 3.27 3.20 3.11 3.05 3.19 3.12 3.24 3.22 3.14 3.24
Refrigerant HFC-134a
Circuit A kg 60 97 64 102 70 85 113 85 119 102 102 180 100
Circuit B kg 64 - 64 - 56 56 - 56 - 56 88 - 95
Circuit C kg - - - - - - - - - - - - -
Compressor Semi-hermetic screw compressor
Circuit A 1 1 1 1 1 1 1 1 1 1 1 1 1
Circuit B 1 - 1 - 1 1 - 1 - 1 1 - 1
Circuit C - - - - - - - - - - - - -
Minimum capacity % 15 30 15 30 15 15 30 15 30 15 15 30 15
TM
Control Touch Pilot control system, electronic expansion valve (EXV)
Condenser Cu/Al heat exchanger
Fans Axial Flying Bird with rotating shround
Quantity 6 5 6 6 7 8 7 8 8 9 11 10 12
l/s 27083 22570 27083 27084 31597 36111 31598 36111 36112 40625 49653 45140 54167
Fan speed rpm 950 950 950 950 950 950 950 950 950 950 950 950 950
Evaporator Flooded multi-pipe
Water content l 58 49 61 54 61 66 76 70 77 77 79 78 94
l/s 13.1 13.3 14.2 15.6 15.6 18.6 21.2 21.5 23.5 24.0 29.5 31 32.1
Nominal water pressure drop kPa 15 22 15 29 18 34 34 38 41 36 46 37 37
Max. water-side pressure
kPa 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000
without hydronic module
Integrated hydronic module (option)
Water pump Centrifugal pump
Water head external to chiller
(single pump at nominal water kPa 188 198 198 169 181 196 254 247 214 213 - - -

Expansion tank l 50 50 50 50 50 50 50 50 50 50 - - -
Max. water-side pressure
kPa 400 400 400 400 400 400 400 400 400 400 - - -
with hydronic module
Water connection Victaulic
Nominal Diameter DN 125 125 125 125 125 125 125 125 125 125 125 150 150
Electrical data
Nominal power supply 400V-3Ph-50Hz
Start-up method Star-delta start
Control power supply 24V via internal transformer
Nominal unit current draw
A 151 147 167 173 182 210 262 238 273 264 320 336 346
Circuit A+B
Circuit C A - - - - - - - - - - - - -
Maximum unit current draw
A 208 180 226 229 243 284 314 316 367 350 423 415 457
Circuit A+B
Circuit C A - - - - - - - - - - - - -
Maximum start-up current
A 274 275 274 308 292 407 504 510 587 510 583 629 616
Circuit A+B
Circuit C A - - - - - - - - - - - - -
Fan and control power kW 9.2 8.4 9.1 9.8 9.3 12.2 11.8 11.8 14.6 14.0 16.8 18.0 19.0
Unit length mm 3604 3604 3604 3604 4798 4798 4798 4798 4798 5992 7186 5992 7186
Unit width mm 2253 2253 2253 2253 2253 2253 2253 2253 2253 2253 2253 2253 2253
Unit height mm 2297 2297 2297 2297 2297 2297 2297 2297 2297 2297 2297 2297 2297
Unit weight kg 3764 3523 3793 3820 4317 4761 4571 4823 4900 5393 6392 5250 6544
Operating weight kg 3830 3578 3860 3875 4380 4830 4641 4900 4984 5470 6480 5328 6640

* Nominal conditions - evaporator entering/leaving water temperature 12/7 C, outdoor air temperature 35 C;
o o

Evaporator fouling factor 0.018m2K/kW

7
 Unit with Cu/Al condenser coil
30XA 0712 0752 0762 0852 0902 1002 1052 1152 1252 1312 1392 1352 1502
Nominal cooling capacity* kW 697 729 737 833 906 988 1089 1134 1256 1326 1382 1449 1518
Compressor input power kW 201 213.5 211 238.8 261.4 288.2 314 328 367 389 409 435.4 436.8
EER 3.15 3.12 3.16 3.18 3.16 3.14 3.16 3.15 3.13 3.12 3.10 3.11 3.18
Refrigerant HFC-134a
Circuit A kg 185 129 195 130 129 140 180 180 190 185 185 112 140
Circuit B kg - 88 - 95 103 129 110 114 114 180 185 98 129
Circuit C kg - - - - - - - - - - - 117 130
Compressor Semi-hermetic screw compressor
Circuit A 1 1 1 1 1 1 1 1 1 1 1 1 1
Circuit B - 1 - 1 1 1 1 1 1 1 1 1 1
Circuit C - - - - - - - - - - - 1 1
Minimum capacity % 30 15 30 15 15 15 15 15 15 15 15 10 10
TM
Control Touch Pilot control system, electronic expansion valve (EXV)
Condenser Cu/Al heat exchanger
Fans Axial Flying Bird with rotating shround
Quantity 11 13 12 14 15 16 17 18 19 20 20 20 24
l/s 49654 58681 54168 63194 67708 72222 76738 81252 85766 90280 90280 90280 108333
Fan speed rpm 950 950 950 950 950 950 950 950 950 950 950 950 950
Evaporator Flooded multi-pipe
Water content l 78 99 78 119 130 140 144 144 144 156 156 224 240
l/s 33 34.8 35 39.7 43.2 47.1 52 54 60 63 66 69.1 72.4
Nominal water pressure drop kPa 43 38 47 39 38 36 42 45 55 53 60 45 48
Max. water-side pressure
kPa 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000
without hydronic module
Integrated hydronic module (option)
Water pump Centrifugal pump
Water head external to chiller
(single pump at nominal water kPa - - - - - - - - - - - - -

Expansion tank l - - - - - - - - - - - - -
Max. water-side pressure
kPa - - - - - - - - - - - - -
with hydronic module
Water connection Victaulic
Nominal Diameter DN 150 150 150 150 150 200 150 150 150 150 150 200 200
Electrical data
Nominal power supply 400V-3Ph-50Hz
Start-up method Star-delta start
Control power supply 24V via internal transformer
Nominal unit current draw
A 363 404 383 446 516 546 565 590 658 697 730 537 546
Circuit A+B
Circuit C A - - - - - - - - - - - 275 273
Maximum unit current draw
A 452 512 479 596 635 734 722 769 830 864 884 678 734
Circuit A+B
Circuit C A - - - - - - - - - - - 364 367
Maximum start-up current
A 629 782 629 815 905 954 1044 1044 1111 1122 1122 901 954
Circuit A+B
Circuit C A - - - - - - - - - - - 587 587
Fan and control power kW 20.0 20.2 22.0 23.0 24.9 26.7 29.8 32.6 34.5 36.0 36.0 30.8 40.3
Unit length mm 7186 8380 7186 8380 9574 9574 10768 10768 11962 11962 11962 11962 14872
Unit width mm 2253 2253 2253 2253 2253 2253 2253 2253 2253 2253 2253 2253 2253
Unit height mm 2297 2297 2297 2297 2297 2297 2297 2297 2297 2297 2297 2297 2297
Unit weight kg 5916 7331 6002 7749 8487 8723 9108 9188 9723 10344 10344 11831 13156
Operating weight kg 5994 7430 6080 7870 8620 8870 9252 9332 9867 10500 10500 12060 13400

* Nominal conditions - evaporator entering/leaving water temperature 12/7 C, outdoor air temperature 35 C
o o

Evaporator fouling factor 0.018m2K/kW

8
Unit with Cu/Al condenser coil
30XQ 0330 0430 0500 0660 0750 0860** 0930**
Nominal Cooling Capacity* kW 315 414 490 647 735 827 904
Nominal Heating Capacity* kW 311 407 470 621 706 814 878
Comp. Input Power(cooling) kW 90.3 118.2 133.7 186.0 210.4 236.3 251.9
Comp. Input Power(heating) kW 87.9 116.0 135.2 175.7 201.0 231.9 251.2
EER 3.13 3.14 3.25 3.14 3.14 3.13 3.20
COP 3.17 3.14 3.08 3.17 3.14 3.14 3.11
Refrigerant Charge HFC-134a
Circuit A kg 115 160 175 115 160 160 175
Circuit B kg - - - 115 115 - -
Circuit C kg - - - - - 160 160
Circuit D kg - - - - - - -
Compressor Semi-hermetic screw compressor
Circuit A 1 1 1 1 1 1 1
Circuit B - - - 1 1 - -
Circuit C - - - - - 1 1
Circuit D - - - - - - -
Minimum capacity % 30 30 30 15 13 15 14
TM
Control Touch Pilot control system, electronic expansion valve (EXV)
Air heat exchanger Cu-Al heat exchanger
Fans Axial Flying Bird with rotating shround
Quantity 6 8 10 12 14 16 18
l/s 27660 36112 45140 54168 63196 72224 81252
Fan speed rpm 950 950 950 950 950 950 950
Water heat exchanger Flooded multi-pipe
Water content l 70 79 94 119 135 158 173
l/s 15.1 19.8 23.4 30.9 35.1 19.8/19.8 19.8/23.4
l/s 14.9 19.4 22.5 29.7 33.7 19.4/19.4 19.4/22.5
Nominal pressure drop (cooling) kPa 21.6 23.0 23.3 25.8 42.0 23.0/23.0 23.0/23.3
Nominal pressure drop (heating) kPa 21.0 22.0 23.1 24.1 40.0 22.0/22.0 22.0/23.1
Max. water-side pressure w/o hydronic module kPa 1000 1000 1000 1000 1000 1000 1000
Water Connection Victaulic
Nominal Diameter DN 150 150 150 150 150 150/150 150/150
Electrical data
Nominal power supply 400V-3Ph-50Hz
Start-up method Star-delta start
Control power supply 24V via internal transformer
Nominal unit current draw, Circuit A+B A 178 228 271 368 418 228 271
Circuit C+D - - - - - 228 228
Maximum unit current draw, Circuit A+B A 243 341 397 485 583 341 397
Circuit C+D - - - - - 341 341
Maximum start-up current, Circuit A+B A 388 587 587 631 830 587 587
Circuit C+D - - - - - 587 587
Fan and control power kW 10.3 13.7 17.2 20.3 24.0 27.5 30.9
Unit length mm 3827 4798 5992 7186 8380 9596 10790
Unit width mm 2253 2253 2253 2253 2253 2253 2253
Unit height mm 2297 2297 2297 2297 2297 2297 2297
Unit weight kg 3953 5366 5783 7486 8919 10732 11149
Operating weight kg 4023 5445 5877 7605 9054 10890 11322

* Nominal cooling mode - evaporator entering/leaving water temperature 12/7 C, outside air temperature 35 C
o o

Nominal heating mode - water heat exchanger entering/leaving water temperature 40/45 C, outside air temperature 7 C
o o

Water heat exchanger fouling factor 0.018m2K/kW

** For duplex models (0860-1500) the listed on the left side and right side of "/"refer to module B (circuit C+D) and module A (circuit A+B) respectively

9
 Unit with Cu/Al condenser coil
30XQ 1000** 1090** 1160** 1250** 1320** 1410** 1500**
Nominal Cooling Capacity* kW 981 1061 1137 1226 1294 1383 1471
Nominal Heating Capacity* kW 941 1029 1092 1177 1243 1328 1412
Comp. Input Power(cooling) kW 267.4 304.1 319.7 344.1 371.9 396.3 420.8
Comp. Input Power(heating) kW 270.4 291.7 310.9 336.2 351.4 376.7 402.0
EER 3.25 3.14 3.18 3.18 3.14 3.14 3.14
COP 3.09 3.16 3.13 3.12 3.17 3.15 3.14
Refrigerant Charge HFC-134a
Circuit A kg 175 115 115 160 115 160 160
Circuit B kg - 115 115 115 115 115 115
Circuit C kg 175 160 175 175 115 115 160
Circuit D kg - - - - 115 115 115
Compressor Semi-hermetic screw compressor
Circuit A 1 1 1 1 1 1 1
Circuit B - 1 1 1 1 1 1
Circuit C 1 1 1 1 1 1 1
Circuit D - - - - 1 1 1
Minimum capacity % 15 9 8 8 8 7 7
TM
Control Touch Pilot control system, electronic expansion valve (EXV)
Air heat exchanger Cu-Al heat exchanger
Fans Axial Flying Bird with rotating shround
Quantity 20 20 22 24 24 26 28
l/s 90280 90280 99308 108336 108336 117364 126392
Fan speed rpm 950 950 950 950 950 950 950
Water heat exchanger Flooded multi-pipe
Water content l 188 198 213 229 238 254 270
l/s 23.4/23.4 19.8/30.9 23.4/30.9 23.4/35.1 30.9/30.9 30.9/35.1 35.1/35.1
l/s 22.5/22.5 19.4/29.7 22.5/29.7 22.5/33.7 29.7/29.7 29.7/33.7 33.7/33.7
Nominal pressure drop (cooling) kPa 23.3/23.3 23.0/25.8 23.3/25.8 23.3/42.0 25.8/25.8 25.8/42.0 42.0/42.0
Nominal pressure drop (heating) kPa 23.1/23.1 22.0/24.1 23.1/24.1 23.1/40.0 24.1/24.1 24.1/40.0 40.0/40.0
Max. water-side pressure w/o hydronic module kPa 1000 1000 1000 1000 1000 1000 1000
Water Connection Victaulic
Nominal Diameter DN 150/150 150/150 150/150 150/150 150/150 150/150 150/150
Electrical data
Nominal power supply 400V-3Ph-50Hz
Start-up method Star-delta start
Control power supply 24V via internal transformer
Nominal unit current draw, Circuit A+B A 271 368 368 418 368 418 418
Circuit C+D 271 228 271 271 368 368 418
Maximum unit current draw, Circuit A+B A 397 485 485 583 485 583 583
Circuit C+D 397 341 397 397 485 485 583
Maximum start-up current, Circuit A+B A 587 631 631 830 631 830 830
Circuit C+D 587 587 587 587 631 631 830
Fan and control power kW 34.4 34.0 37.5 41.2 40.6 44.3 48.0
Unit length mm 11984 11984 13178 14372 14372 15566 16760
Unit width mm 2253 2253 2253 2253 2253 2253 2253
Unit height mm 2297 2297 2297 2297 2297 2297 2297
Unit weight kg 11566 12852 13269 14702 14972 16405 17838
Operating weight kg 11754 13050 13482 14931 15210 16659 18108

* Nominal cooling mode - evaporator entering/leaving water temperature 12/7 C, outside air temperature 35 C
o o

Nominal heating mode - water heat exchanger entering/leaving water temperature 40/45 C, outside air temperature 7 C
o o

Water heat exchanger fouling factor 0.018m2K/kW

** For duplex models (0860-1500) the listed on the left side and right side of "/"refer to module B (circuit C+D) and module A (circuit A+B) respectively

10
 Options & accessories

Options No. Description Advantages Use*

Blygold PoluAL 002B Coil with factory-applied Improved corrosion resistance, 30XA0282~0482
Blygold PoluAL treatment recommended for heavy marine and 30XA0252~1502
industrial environments 30XA0652~1392
Gold Fin 003A Fin made of pre-treated Improved corrosion resistance, 30XA0282~0482
aluminium (polyurethane recommended for light marine 30XA0252~1502
and epoxy) environments 30XA0652~1392
Medium brine 005 Leaving water temperature down For low temperature applications such 30XA0252~1502
to -6 °C as ice storage, cold stores or process
cooling etc.
High static fan 012 High static pressure fan for Ducted condenser air discharge, 30XA0252~1502
indoor unit installation with optimized condensing temperature
discharge ducts control
Low noise 015 Compressor sound enclosure Low operating noise 30XA0282~0482
30XA0252~1502
30XA0652~1392
Low noise 015L Low-speed fan Low operating noise 30XA0282~0482
30XA0252~1502
30XA0652~1392
Super low noise 015LS Compressor sound enclosure Super low operating noise 30XA0282~0482
and low-speed fan 30XA0252~1502
30XA0652~1392
Low noise 015S Compressor and oil separator sound Low operating noise 30XQ0330~1500
jacket
MCHX bare coil 018 Micro-channel heat exchanger 30% reduction of refrigerant charge 30XA0282~0482
amount and convenient to clean by a 30XA0252~1502
high pressure washer
IP54 020A IP 54 electrical box protection Improved electrical box protection, 30XA0282~0482
recommended for dusty / sandy 30XA0252~1502
environments 30XA0652~1392
Soft starter 025 Electronic starter on each Reduced start-up current 30XA0602~1502
compressor
Winter operation 028 Fan speed control by frequency Stable operation between -10°C to 30XA0252~1502
inverter -20°C outdoor air temperature
Evaporator anti-freeze 041A Electric heater on evaporator Ensures evaporator anti-freeze 30XA0282~0482
protection protection down to -20°C without glycol 30XA0252~1502

Evaporator and hydronic 041B Electric heater on evaporator Ensures evaporator & hydronic module 30XA0282~0482
module anti-freeze protection and hydronic module anti-freeze protection down to -20°C 30XA0252~0502
without glycol
Full heat recovery 050 Heat recovery water cooled Recover 100% of rejected heat 30XA0252~1002
condenser
Single point power connection 081 Single main power connetion Easy to power connection 30XA1352/1502

* 30XA0282~0482 - 30XA0282/0342/0442/0482
30XA0252~0502 - 30XA0252/0302/0352/0402/0452/0502
30XA0252~1002 - 30XA0252/0302/0352/0402/0452/0502/0602/0702/0752/0852/0902/1002
30XA0252~1502 - 30XA0252/0302/0352/0402/0452/0502/0602/0702/0752/0852/0902/1002/1352/1502
30XA0602~1502 - 30XA0602/0702/0752/0852/0902/1002/1352/1502
30XA0652~1392 - 30XA0652/0712/0762/1052/1152/1252/1312/1392
30XQ0330~1500 - 30XQ0330/0430/0500/0660/0750/0860/0930/1000/1090/1160/1250/1320/1410/1500

11
 Options & accessories

Options No. Description Advantages Use*

1600kPa evaporator 104 Reinforced evaporator for Covers applications with a high 30XA0282~0482
extension of the maximum water column (high buildings) 30XA0252~1502
water-side pressure range to
1600kPa
Reversed water 107 Evaporator with reversed water Simplification of water piping 30XA0282~0482
connections inlet/outlet 30XA0602~1502
30XA0712/0762
Fixed speed single 116B Provide fixed speed single pump Easy and fast installation 30XA0282~0482
pump hydronic module of average 200KPa external 30XA0252~0502
pressure
Fixed speed dual 116C Provide fixed speed dual pumps Easy and fast installation, 30XA0282~0482
pump hydronic module of average 200KPa external operating safety 30XA0252~0502
pressure
Direct-expansion free- 118A Chilled water production without Very economical chilled water 30XA0252-1002**
cooling system the use of the compressors, using production at low outdoor
direct-expansion heat exchange on temperatures
the condensers
J-Bus gateway 148B Two-directional communication Easy connection by 30XA0282~0482
board with J-Bus protocol communication bus to a building 30XA0252~1502
management system 30XA0652~1392
30XQ0330~1500
BacNet gateway 148C Two-directional communication Easy connection by 30XA0282~0482
board with BacNet protocol communication bus to a building 30XA0252~1502
management system 30XA0652~1392
30XQ0330~1500
LonTalk gateway 148D Two-directional communication Easy connection by 30XA0282~0482
board with LonTalk protocol communication bus to a building 30XA0252~1502
management system 30XA0652~1392
30XQ0330~1500
Energy Management 156 See control manual - 30XA0282~0482
Module (EMM) 30XA0252~1502
30XA0652~1392
30XQ0330~1500
Touch screen display 158 Pro-Dialog control with touch User friendly 30XA0282~0482
screen interface 30XA0252~1502
30XA0652~1392
30XQ0330~1500
Cu/Al condenser coils 254 Coil made of copper tube with - 30XA0282~0482
aluminium fin 30XA0252~1502
30XA0652~1392
Super Enviro-shield 263 E-coated MCHX coils Improved corrosion resistance, 30XA0282~0482
MCHX coils recommended for heavy marine 30XA0252~1502
and industrial environments
38mm cooler insulation 299 38mm thermal insulation on cooler Better prevents condensation on 30XA0252-1502
high humidity environment
Lead Lag Control 301 To allow master/slave operation of Optimised operation of two chillers 30XA0252-1502
two chillers connected in parallel or connected in parallel with
series operating time balancing
Blue fin 303 Hydrophilic aluminium foil Enhanced hydrophilic character 30XA0282~0482
and better aesthetics 30XA0252~1502
Conformance with 312AN Evaporator and oil separator - 30XA0282~0482
Australian regulations modified according to Australian 30XA0252~1502
regulations

* 30XA0282~0482 - 30XA0282/0342/0442/0482
30XA0252~0502 - 30XA0252/0302/0352/0402/0452/0502
30XA0252~1502 - 30XA0252/0302/0352/0402/0452/0502/0602/0702/0752/0852/0902/1002/1352/1502
30XA0602~1502 - 30XA0602/0702/0752/0852/0902/1002/1352/1502
30XA0652~1392 - 30XA0652/0712/0762/1052/1152/1252/1312/1392
30XQ0330~1500 - 30XQ0330/0430/0500/0660/0750/0860/0930/1000/1090/1160/1250/1320/1410/1500
** 30XA0252~1002 - 30XA0252/0302/0402/0452/0502/0602/0702/0852/1002 (for both MCHX coil & Cu-Al Coil)
30XA0352/0752/0902 only for MCHX coil

12
Dimensions/Clearances
30XA0282~0482 - Cu/Al Condenser coils (option 254)
2297

B
A
E C
X 2253

D
1500

1500 500
1

1
1 2

1
1500
2200

Legend:
All dimensions are given in mm.

Required clearances for maintenance and air flow

Recommended space for evaporator

Water outlet

Water inlet

Power supply connection

Air outlet - do not obstruct

Control circuit connection

30XA A B C D E X

0282 317 210 515 1371 734 3604

0342 317 210 515 1371 1371 3604

0442 346 272 438 2182 1371 4798

0482 346 272 438 2182 1371 4798

Note: Single point power connection, power cable arrive from bottom of electrical box, reserve at least 120mm height space below
unit for power supply connection (unit aerial installation or cable slot)

13
 Dimensions/Clearances
30XA0252/0302 - Cu/Al Condenser coils (option 254)

2297

210
777 515

317
3604 2253

1500
1500

1 500

1367
2

1 1

1
1500

2200

30XA0352/0402/0452 - Cu/Al Condenser coils (option 254)

2297

210
317

777 515
4798 2253

Top View
1500

Legend:
1500
All dimensions are given in mm.
1
Required clearances for
maintenanceand air flow
2067 Recommended space for
2
evaporatortube removal

Water inlet
1 1
Water outlet

Air outlet – do not obstruct

Power supply connection

1
Control circuit connection
2200

1500

Note: Single point power connection, power cable arrive from bottom of electrical box

14
Dimensions/Clearances
30XA0502 - Cu/Al Condenser coils (option 254)

2297

210
777 515

317
5992 2253

1500
1500

2873

1 1
2

2200
1
1500

30XA 0602/0702 - Cu/Al Condenser coils (option 254)

C
2297

B
A

E C
7186 2253
1 500

1500 Legend:
1 All dimensions are given in mm.
Required clearances for
D
maintenanceand air flow
Recommended space for
1 evaporatortube removal
1
2
Water inlet

Water outlet
2200

Air outlet – do not obstruct

1
1500
Power supply connection
30XA A B C D E
0602 356 272 438 2852 3787 Control circuit connection
0702 372 242 438 2852 3787

Note: Single point power connection, power cable arrive from bottom of electrical box, reserve at least 120mm height space below
unit for 30XA0602~0702 power supply connection (unit aerial installation or cable slot)

15
 Dimensions/Clearances
30XA0652 - Cu/Al Condenser coils (option 254)
2297

284
438

375
2056
5992 2253
1500

1278
1500

1500
2200

30XA0712/0762 - Cu/Al Condenser coils (option 254)

2297

284

438
375

611
7186 2253

Legend:
1500

3673
1500 All dimensions are given in mm.
Required clearances for
maintenanceand air flow
Recommended space for
evaporatortube removal

Water inlet

Water outlet

Air outlet – do not obstruct

1500 Power supply connection

2200

Control circuit connection

Note: Single point power connection, power cable arrive from bottom of electrical box, reserve at least 120mm height space below
unit for 30XA0652~0762 power supply connection (unit aerial installation or cable slot)

16
Dimensions/Clearances
30XA0752/0852 - Cu/Al Condenser coils (option 254)

G
2297

E
8380

1500
1500

1 1
2

2200
1

1500

Legend:
All dimensions are given in mm.
Required clearances for
maintenanceand air flow
Recommended space for
evaporatortube removal

Water inlet

Water outlet
A B

Air outlet – do not obstruct

Power supply connection

C
2253
Control circuit connection
View G

30XA A B C D E

0752 372 242 438 2848 4965

0852 325 284 438 2836 4965

Note: Single point power connection, power cable arrive from bottom of electrical box, reserve at least 120mm height space below
unit for power supply connection (unit aerial installation or cable slot)

17
 Dimensions/Clearances
30XA0902/1002 - Cu/Al Condenser coils (option 254)

G C
2297

E
9574
1500

1500
1

1 1

2200
1

1500

Legend:
All dimensions are given in mm.

Required clearances for

maintenanceand air flow
Recommended space for
evaporatortube removal

Water inlet

Water outlet
B

Air outlet – do not obstruct

A

C
2253 Power supply connection

View G Control circuit connection

30XA A B C D E

0902 325 284 438 2840 5924

1002 297 438 438 2832 5924

Note: Single point power connection, power cable arrive from bottom of electrical box, reserve at least 120mm height space below
unit for power supply connection (unit aerial installation or cable slot)

18
Dimensions/Clearances
30XA1052/1152 - Cu/Al Condenser coils (option 254)

G F
2297

3595

10768
1500

1280 1500 1000

2200
1500 493
517

438 493

2253

View G View F

Legend:
All dimensions are given in mm. Air outlet – do not obstruct

Required clearances for Water inlet Power supply connection

maintenanceand air flow
Recommended space for Water outlet
evaporatortube removal Control circuit connection

Note: Single point power connection, power cable arrive from bottom of electrical box, reserve at least 120mm height space below
unit for 30XA1052/1152 power supply connection (unit aerial installation or cable slot)

19
 Dimensions/Clearances
30XA1252 - Cu/Al Condenser coils (option 254)

G F
2297

3595

11962
1500

3669
1500

1000

2200
1500
517

493

438 439

2253

View G View F

Legend:
All dimensions are given in mm. Air outlet – do not obstruct

Required clearances for Water inlet Power supply connection

maintenanceand air flow
Recommended space for Water outlet
evaporatortube removal Control circuit connection

Note: Single point power connection, power cable arrive from bottom of electrical box, reserve at least 120mm height space below
unit for 30XA1052/1152 power supply connection (unit aerial installation or cable slot)

20
Dimensions/Clearances
30XA1312/1392 - Cu/Al Condenser coils (option 254)

G F
2297

5983

11962

1281 861 1500

1500

2200
1500
517

517

438 438

2253

View G View F

Legend:
All dimensions are given in mm. Air outlet – do not obstruct

Required clearances for Water inlet Power supply connection

maintenanceand air flow
Recommended space for Water outlet
evaporatortube removal Control circuit connection

Note: Single point power connection, power cable arrive from bottom of electrical box, reserve at least 120mm height space below
unit for 30XA1312/1392 power supply connection (unit aerial installation or cable slot)

21
 Dimensions/Clearances
30XA1352 - Cu/Al Condenser coils (option 254)

G C
2297

D E
11962 A
1500

1500
1

844

1
1

2297
2

2200
1

1500

B
493

439
2253 A

View G View F

Legend:
All dimensions are given in mm. Air outlet – do not obstruct

Required clearances for Water inlet Power supply connection

maintenanceand air flow
Recommended space for Water outlet
evaporatortube removal Control circuit connection

30XA A B C D E

1352 439 442 1670 3428 3387

Note: Dual point power connection (Single point power connection as option), power cable arrive from bottom of electrical box, reserve at
least 120mm height space below unit for power supply connection (unit aerial installation or cable slot)

22
Dimensions/Clearances
30XA1502, module 1/2 - Cu/Al Condenser coils (option 254)

G C
2297

5924

9574

3884
1500

1500
Module 2

2200
1500

Legend:
All dimensions are given in mm.
Required clearances for
maintenanceand air flow
Recommended space for
evaporatortube removal

Water inlet

Water outlet

Air outlet – do not obstruct

442

Power supply connection

438
2253 Control circuit connection

View G

Note: Dual point power connection (Single point power connection as option), power cable arrive from bottom of electrical box,
reserve at least 120mm height space below unit for power supply connection (unit aerial installation or cable slot)

23
 Dimensions/Clearances
30XA1502, module 2/2 - Cu/Al Condenser coils (option 254)
2297

493
3428 439

4798 2253

844
1500

Module 1
2200

1500

Legend:
All dimensions are given in mm. Air outlet – do not obstruct

Required clearances for Water inlet Power supply connection

maintenanceand air flow
Recommended space for Water outlet
evaporatortube removal Control circuit connection

Note: Dual point power connection (Single point power connection as option), power cable arrive from bottom of electrical box,
reserve at least 120mm height space below unit for power supply connection (unit aerial installation or cable slot)

24
Dimensions/Clearances
30XQ0300 - Cu/Al Condenser coils

2297

362 242
3604 519
3827 2253

1500 643

1500
2200

1500

30XQ0430/0500 - Cu/Al Condenser coils

2297

C
B
A

C 519
X 2253

E
Legend:
D
1500 All dimensions are given in mm.
Required clearances for
.

maintenanceand air flow

Recommended space for
evaporatortube removal
Water inlet

Water outlet

Air outlet – do not obstruct

Power supply connection

2200

1500
Control circuit connection

30XQ A B C D E H X

0430 362 242 457 856 1854 1500 4798

0500 362 242 950 856 1854 1500 5992

Note: Single point power connection, power cable arrive from bottom of electrical box, reserve at least 120mm height space below
unit for 30XQ0430~0500 power supply connection (unit aerial installation or cable slot)

25
 Dimensions/Clearances
30XQ0660/0750 - Cu/Al Condenser coils

G
2297

D 1500
H

2200
1500

Legend:
All dimensions are given in mm.
Required clearances for
maintenanceand air flow
Recommended space for
evaporatortube removal

Water inlet

Water outlet
B

Air outlet – do not obstruct

A

Power supply connection

519
2253
Control circuit connection
View G

30XQ A B C D E H X

0660 340 284 943 762 1663 2200 7186

0750 340 284 4730 1396 2297 1500 8380

Note: Single point power connection, power cable arrive from bottom of electrical box, reserve at least 120mm height space below
unit for power supply connection (unit aerial installation or cable slot)

26
Dimensions/Clearances
30XQ0860~1500 - Cu/Al Condenser coils

G
2297

Module B C1 Module A C2

X Y

E1 E2

D1 D2
1500

F
H

2200
F

1500
A2 B2
A1 B1

519 519
2253
2253
Section F-F
View G
Legend:
All dimensions are given in mm. Air outlet – do not obstruct

Required clearances for Water inlet Power supply connection

maintenanceand air flow
Recommended space for Water outlet
evaporatortube removal Control circuit connection

30XQ A1 A2 B1 B2 C1 C2 D1 D2 E1 E2 H X Y

0860 362 362 242 242 457 457 856 856 1854 1854 1500 4798 4798

0930 362 362 242 242 457 950 856 856 1854 1854 1500 4798 5992

1000 362 362 242 242 950 950 856 856 1854 1854 1500 5992 5992

1090 362 340 242 284 457 943 856 762 1854 1663 2200 4798 7186

1160 362 340 242 284 950 943 856 762 1854 1663 2200 5992 7186

1250 362 340 242 284 950 4730 856 1396 1854 2297 1500 5992 8380

1320 340 340 284 284 943 943 762 762 1663 1663 2200 7186 7186

1410 340 340 284 284 943 4730 762 1396 1663 2297 2200 7186 8380

1500 340 340 284 284 4730 4730 1396 1396 2297 2297 1500 8380 8380

Note: Dual point power connection, power cable arrive from bottom of electrical box, reserve at least 120mm height space below unit
for power supply connection (unit aerial installation or cable slot)

27
 Multiple Chiller Installation

Wall Wall

1500 1500

Note: If the height of wall exceeds 2m, please contact

local Carrier Sales & Service Corporation.
1500

Weight Distribution, 30XA0252~1502

P2 P4 P2 P4 P6 P2 P4 P6 P8 P2 P4 P6 P8 P10
A
B
A

A
B

B
A

P3 P1 P3 P5 P1 P3 P5 P7 P1 P3 P5 P7 P9
P1
446 446 446 D E F
D D E 446 D E F G
C
C C C

30XA0252~0342 30XA0352~0482 30XA0502/0652 30XA0602/0702/0712/0762

P2 P4 P6 P8 P10 P12 P2 P4 P6 P8 P10 P12 P2 P4 P6 P8 P10 P12 P14 P16

A
B

A
B
A
B

P1 P3 P5 P7 P9 P11 P1 P3 P5 P7 P9 P11 P1 P3 P5 P7 P9 P11 P13 P15

446 D E F G H 446 D E F G H 446 D E F G H I J

C C
C

30XA0752/0852/1052/1152 30XA0902/1002 30XA1252/1312/1352/1392 F

Unit footprint Square hole 100×100

P2 P4 P6 P8 P10 P12 P2 P4 P6
50

350
A
A
B

350

P1 P3 P5 P7 P9 P11 P1 P3 P5

G 446 D E
446 D E F H Section F-F

C C

30XA1502-1 30XA1502-2

28
Weight Distribution, 30XA0252~1502

Dimensions, mm Weight distribution, kg Operating

Models weight
A B C D E F G H I J P1 P2 P3 P4 P5 P6 P7 P8 P9 P10 P11 P12 P13 P14 P15 P16 kg

30XA0252 2231 2157 3582 2690 930 901 1016 983 3830

30XA0282 2231 2157 3582 2690 865 775 1015 923 3578

30XA0302 2231 2157 3582 2690 942 835 1103 980 3860

30XA0342 2231 2157 3582 2690 930 840 1100 1005 3875

30XA0352 2231 2157 4776 1942 1942 737 665 768 692 798 720 4380

30XA0402 2231 2157 4776 1942 1942 859 739 865 745 871 751 4830

30XA0442 2231 2157 4776 1942 1942 991 887 784 701 665 612 4640

30XA0452 2231 2157 4776 1942 1942 876 751 880 753 884 756 4900

30XA0482 2231 2157 4776 1942 1942 1080 976 874 790 663 601 4984

30XA0502 2231 2157 5970 1496 892 2690 716 628 724 635 730 639 744 654 5470

30XA0602 2231 2157 7164 1942 1942 892 1496 698 601 697 599 697 599 697 599 695 598 6480

30XA0652 2231 2157 5970 1496 892 2690 915 739 796 643 725 586 511 413 5328

30XA0702 2231 2157 7164 1942 1942 892 1496 709 615 709 618 710 618 711 618 713 619 6640

30XA0712 2231 2157 7164 1942 1942 892 1496 599 526 622 546 645 565 655 575 672 589 5994

30XA0752 2231 2157 8358 1496 892 2690 892 1496 704 600 691 588 682 580 656 558 647 552 633 539 7430

30XA0762 2231 2157 7164 1942 1942 892 1496 591 542 616 565 641 588 652 598 671 616 6080

30XA0852 2231 2157 8358 1496 892 2690 892 1496 739 644 724 631 716 622 687 598 678 591 662 578 7870

30XA0902 2231 2157 9552 1942 1942 892 1942 1942 865 764 820 723 773 683 752 664 707 624 661 584 8620

30XA1002 2231 2157 9552 1942 1942 892 1942 1942 899 793 847 749 796 704 772 683 722 639 671 595 8870

30XA1052 2231 2157 10746 1496 892 2690 2834 1942 846 711 844 709 842 708 837 703 831 699 827 695 9252

30XA1152 2231 2157 10746 1496 892 2690 2834 1942 862 707 858 705 857 704 853 701 848 697 845 695 9332

30XA1252 2231 2157 11940 1496 892 1942 1942 892 1942 1942 605 541 618 553 626 560 643 575 661 590 668 597 686 613 703 628 9867

30XA1312 2231 2157 11940 1496 892 1942 1942 892 1942 1942 800 626 782 612 771 601 747 585 724 566 713 558 689 539 666 521 10500

30XA1352 2231 2157 11940 1942 1942 892 1942 1942 892 1496 792 711 793 712 794 712 796 713 794 713 797 713 796 714 796 714 12060

30XA1392 2231 2157 11940 1496 892 1942 1942 892 1942 1942 800 626 782 612 771 601 747 585 724 566 713 558 689 539 666 521 10500

30XA1502/1 2231 2157 9552 1942 1942 892 1942 1942 906 802 853 754 803 709 780 688 727 642 676 599 8939

30XA1502/2 2231 2157 4776 1942 1942 981 877 785 701 590 527 4461

Note: (1) foot screw even hole number (far side) represent for evaporator side
(2) foot screw, M20X300

29
 Weight Distribution, 30XQ0330~1500

30XQ0430, 30XQ0930 Module B 30XQ0500, 30XQ0930 Module A

30XQ1090 Module B, 30XQ0860 Module A/B Module A/B, 30XQ1160Module B, 30XQ1250Module B

;TOZLUUZVXOTZ 9W[GXKNURK

9KIZOUT, ,
30XQ0660, 30XQ0750, 30XQ1090 Module A
30XQ1160 Module A, 30XQ1250 Module A, 30XQ1320/1410/1500 Module A/B

Dimensions, mm Weight distribution, kg Operating

Models weight
A B C D E F G P1 P2 P3 P4 P5 P6 P7 P8 P9 P10 kg

30XQ0330 2231 2157 3582 2690 1398 1273 708 644 4023

30XQ0430 2231 2157 4476 1942 1942 962 908 934 881 906 854 5445

30XQ0860 Module A/B 2231 2157 4476 1942 1942 962 908 934 881 906 854 5445

30XQ0930 Module B 2231 2157 4476 1942 1942 962 908 934 881 906 854 5445

30XQ1090 Module B 2231 2157 4476 1942 1942 962 908 934 881 906 854 5445

30XQ0500 2231 2157 5970 2690 892 1496 914 856 767 718 718 672 636 596 5877

30XQ0930 Module A 2231 2157 5970 2690 892 1496 914 856 767 718 718 672 636 596 5877

30XQ1000 Module A/B 2231 2157 5970 2690 892 1496 914 856 767 718 718 672 636 596 5877

30XQ1160 Module B 2231 2157 5970 2690 892 1496 914 856 767 718 718 672 636 596 5877

30XQ1250 Module B 2231 2157 5970 2690 892 1496 914 856 767 718 718 672 636 596 5877

30XQ0660 2231 2157 7164 1942 1942 892 1496 739 727 755 743 771 759 778 766 790 777 7605

30XQ1090 Module A 2231 2157 7164 1942 1942 892 1496 739 727 755 743 771 759 778 766 790 777 7605

30XQ1160 Module A 2231 2157 7164 1942 1942 892 1496 739 727 755 743 771 759 778 766 790 777 7605

30XQ1320 Module A/B 2231 2157 7164 1942 1942 892 1496 739 727 755 743 771 759 778 766 790 777 7605

30XQ1410 Module B 2231 2157 7164 1942 1942 892 1496 739 727 755 743 771 759 778 766 790 777 7605

30XQ0750 2231 2157 8358 1942 1942 892 2690 1003 1009 949 955 895 901 870 876 796 800 9054

30XQ1250 Module A 2231 2157 8358 1942 1942 892 2690 1003 1009 949 955 895 901 870 876 796 800 9054

30XQ1410 Module A 2231 2157 8358 1942 1942 892 2690 1003 1009 949 955 895 901 870 876 796 800 9054

30XQ1500 Module A/B 2231 2157 8358 1942 1942 892 2690 1003 1009 949 955 895 901 870 876 796 800 9054

Note: (1) foot screw even hole number (far side) represent for evaporator side
(2) foot screw, M20X300

30
Evaporator Water Pressure Drop, 30XA0252~1502

100 100
90 90
80 1 0282/0342 1 0702
80
70 2 0402 2 0752
70
60 3 0452 3 0852
60
4 0252/0442/0482 1 2 3 4 4 0902
Pressure drop, kPa

Pressure drop, kPa

50
5 0302/0352 50
5 6 7 5 1002
40 6 0502 40 6 1352 1 2 3 4 5 6 7
7 0602 7 1502
30
30

20 20

10 10
10 20 30 40 50 60 70 80 90 100
10 20 30 40 50

Water flow rate, l/s Water flow rate, l/s

Evaporator Water Pressure Drop, 30XA0652~1392

100
90
① 652/712/762
80
② 1052/1152/1252
70 ③ 1312/1392
60
Water pressure drop, kPa

50

40
1

30
2
②
3
③

20

10
10 20 30 40 50 60 70 80 90 100
Water flow rate l/s

Heat exchanger Water Pressure Drop, 30XQ0330~1500

100
90
80
70 1. 30XQ0330
60 3 2. 30XQ0430, 30XQ0860 ModuleA/B,
drop, kPa

50 30XQ0930 ModuleB, 30XQ1090 ModuleB

40 5
3. 30XQ0500, 30XQ0930 ModuleA,
1
ķ 30XQ1000 ModuleA/B, 30XQ1160 ModuleB,
Pressure

30 2
30XQ1250 ModuleB
4
4. 30XQ0660, 30XQ1090 ModuleA,


20 30XQ1160 ModuleA, 30XQ1320 ModuleA/B,

30XQ1410 ModuleB
5. 30XQ0750, 30XQ1250 ModuleA ,
30XQ1410 ModuleA , 30XQ1500 ModuleA/B
10
10 20 30 40 50 60 70 80 90 100
Water flow rate,
 l/s

31
 Hydronic Connections, 30XA

Legend:
Components of the unit and hydronic module
1 Victaulic screen filter System components
2 Expansion tank 18 Air vent
3 Safety valve 19 Flexible connection
4 Water pump 20 Shut-down valves
5 Pressure tap valve (see Installation Manual) 21 Charge valve
6 Pressure gauge to measure the component
pressure loss (see Installation Manual) --- Hydronic module (option)
7 System vent valve
8 Drain valve
9 Water flow control valve
10 Evaporator
11 Evaporator anti-freeze heater (option)
12 Hydronic module anti-freeze heater (option)
13 Air vent (evaporator)
14 Water purge (evaporator)
15 Expansion compensator (flexible connections)
16 Flow switch
17 Water temperature sensor

Available Static System Pressure

H igh-pressure pumps

400
375
350
Available static pressure, kPa

325
300
275
250
225
200 Legend
175 1 30XA 0252/0282
150 2 30XA 0342
125 3 30XA 0352
1 2 3 4 5 6 7 4 30XA 0302
100
5 30XA 0402/0442
75
6 30XA 0452/0482
50
7 30XA 0502
3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33
Water flow rate, l/s

32
Minimum Water Loop Volume

For better control of leaving water temperature, the water loop minimum capacity is given by the formula:
Capacity = CAP (kW) × N Liters

Application N
30XA0282-0482/30XA0252-1502/30XA0652-1392 3.5
Normal air conditioning
30XQ0330-1500 3.5
30XA0282-0482/30XA0252-1502/30XA0652-1392 6.5
Process cooling
30XQ0330-1500 6.5

Where Cap is the nominal system cooling capacity (kW) at the nominal operating conditions of the installation.

This volume is necessary for stable operation and accurate temperature control.

It is often necessary to add a buffer water tank to the circuit in order to achieve the required volume. The tank must be internally baffled
in order to ensure proper mixing of the liquid (water or brine). Refer to the examples below.

Bad Good Bad Good

Field Control Wiring, 30XA/30XQ

J23 A11
80mA MIN-3A MAX
Alert 30
D005
31
1.5mm2MAX 3A MAX 24VAC-48VDC MAX
80mA MIN 20V-MIN J22
80mA MIN-3A MAX
37
Chiller D006
38
Status

J1
32 DI01
Remote on/off 33 +C
24VAC，20mA

65 DI02
Set point switch 66 +C
1.5mm2MAX 24VAC-20mA
63 DI03
Demand limit 64 +C
73 DI04
Cooling/Heating switch (30XQ only)
74 +C

J6
90 D003
Water pump #1 command
1.5mm2MAX 24VAC-30VA MAX 90A D004
Water pump #2 command
12
Terminals

A1
- CCN
CCN connector GNDPort 0
+ X3
1.5mm2MAX

Ethernet
Ethernet connector X2

33
The Manufacturer reserves the right to change any produt specifications without prior notices Version: CAT_30XAXQ_E-1508_04

Supercede: CAT_30XAXQ_E-1412_03

Effective date: Aug, 2015