MVS Acb
MVS Acb
EasyPact MVS
LV power circuit breakers and switch-disconnectors 800 to 4000A
Catalogue
2018
Performance without compromise
Exceptional Quality and safety Outstanding value for an reliability,flexibility you can
trust optimized feature set and convenience
Green Premium is the only label allowing you to develop effectively an environmental policy
and to promote it, while preserving your business efficiency.
It guarantees compliance with the most up-to-date environmental regulations, but it is more
than this.
A ground fault in the protection conductors can provoke local temperature rise at the
site of the fault or in the conductors. The purpose of the ground-fault protection
function is to eliminate this type of fault.
Instantaneous protection
The Instantaneous-protection
Typ Description function protects the distribution system against solid
eshort-circuits. Contrary to the short-time protection function, the tripping delay for
Resi b The function
instantaneous determines
protection the
is not adjustable. The tripping order is sent to the circuit
dual zero-phase
breaker as soon assequence current, the set value, with a fixed time delay of
current exceeds
i.e. the
20 milliseconds.
Neutral protection
On three-pole circuit breakers, neutral protection is not possible. On four-pole circuit
breakers, neutral protection may be set using a three-position switch: neutral
unprotected (4P 3d), neutral protection at 0.5 Ir (4P 3d + N/2), neutral protection at Ir
(4P 4d).
Zone selective interlocking (ZSI)
A ZSI terminal block may be used to interconnect a number
(2)
0 to -20 % 7.2 x Ir 0.7 0.69 1.38 2.7 5.5 8.3 11 13.8 16.6
(2)
DB1
011
Thermal memory 20 minutes before and after tripping
26 (1) 0 to -40 % - (2) 0 to -60 %
L Instantaneous Pick-up (A) Isd = Ir x … 1.52 2.53 4 5 6 8 10 Accuracy: ±10 %
o Time delay Max resettable time: 20 ms Max break time: 80 ms
n
g
ti
m Long time
e
ETA5S/ETA6G Current setting (A) Ir = In x … 0.4 0.5 0.6 0.7 0.8 0.9 0.95 0.98 1 Tripping between 1.05 and 1.20 x Ir
E
T
A
2I
Cu
rre
nt
se
tti
ng Time setting tr (s) 0.51 2 4 8 12162024
(A Time delay (s) Accuracy: 0 to -30 % 1.5 x Ir 12.5 25 50 100 200 300 400 500 600 Accuracy: 0 to -20 % 6 x Ir 0.71 2 4 8 12162024 Accuracy:
(1)
) Ir
0 to -20 % 7.2 x Ir 0.7 (2)
0.69 1.38 2.7 5.5 8.3 11 13.8 16.6
= Thermal memory 20 minutes before and after tripping
In (1) 0 to -40 % - (2) 0 to -60 %
x. Short time Pick-up (A) Isd = Ir x … 1.52 2.53 4 5 6 8 10 Accuracy: ±10 %
..
Time setting tsd (s) Settings It Off 0 0.1 0.2 0.3 0.4 I t On -0.1 0.2 0.3 0.4
2 2
0.
Time delay (ms) at 10 x Ir tsd (max resettable time) 20 80 140 230 350 (I t Off or I t On) tsd (max break time) 80 140 200 320 500 Instantaneous
2 2
4
0. Pick-up (A) Ii = In x … 2 3 4 6 8 101215off Accuracy: ±10 %
5 Time delay Max resettable time: 20 ms Max break time: 50 ms
0. Earth fault
6
0. ETA6G Pick-up (A) Ig = In x … A BCDE F GHJ Accuracy: ±10 % In y400 A 0.3 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
7 400 A < In y1000 A 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
0. In u1250 A 500 640 720 800 880 960 1040 1120 1200
8
0.
9
0.
95
0.
98
1 Time setting tg (s) Settings I
2
t Off 0 0.1 0.2 0.3 0.4 I t On -0.1 0.2 0.3 0.4
2
Tri Time delay (ms) tg (max resettable time) 20 80 140 230 350
pp
in
g
be at In or 1200 A (I
2
t Off or I t On) tg (max break time) 80 140 200 320 500
2
tw Type of measurements
ee
n
Range
1.
05 Accuracy
an Instantaneous currents I1, I2, I3, In 0.2 x In to 1.2 x In ± 1.5 % Ig (ETA6G) 0.2 x In to In ± 10 %
d
1.
20
x
Ir
Current maximeters of I1, I2, I3, In 0.2 x In to 1.2 x In ± 1.5 %
Note: All current-based protection functions require no auxiliary source. The test / reset button resets maximeters, clears the tripping indication and tests the
battery.
Remote operation
Remote ON / OFF
MX voltage releases. XF voltage release.
R operati
e on
m and characteristics
Characteristics
o Rem
Power supply
V AC
50/6 t
24 - 48 - 100/130 - ote
200/250 - 380/480
0 Hz
trippi
DC
V
- 200/250e
24/30 - 48/60 - 100/130
ng
MN voltage Operating Ope 0.35 to 0.7 Un
056422
release. threshold ning
N
DB100
stantaneous voltage releases Closi MNUn
0.85
809-16 The MN release instantaneouslyng opens the circuit breaker when its supply voltage drops to a value between 35 % and 70 % of its rated
Consumption (VA or W) Pick-up: Hold: 4.5
voltage. If there is no supply on the release, it is impossible to close the circuit breaker, either manually or electrically. Any attempt to close
200 (200
the circuit breaker has no effect on the main
ms) contacts. Circuit breaker closing is enabled again when the supply voltage of the release
returns to 85% of its rated value.
Pick-up:
Hold
MN delay unit. Delay unit consumption 200 (200
: 4.5
ms)
Circuit-breaker response Non- 0.25 s
MN delay units
To eliminate circuit-breaker nuisance tripping during short voltage dips, operation of
the MN release can be delayed. This function is achieved by adding an external
In delay unit in the MN voltage-release circuit. Two versions are available, adjustable and non-adjustable.
Characteristics
Power supply Non-adjustable 100/130 - 200/250 V AC 50-60 Hz /DC Adjustable 48/60 - 100/130 - 200/250 - 380/480
Operating threshold Opening 0.35 to 0.7 Un Closing 0.85 Un
Dimensions and
connection
EasyPact MVS Dimensions and connection
Accessories C-10
External modules C-11
Electrical diagrams D-1 Additional characteristics E-1 Catalogue numbers and order form F-1
Dimensions MVS08 to MVS32 circuit breakers
and connection
DB101271DB101269DB101267
Fixed 3/4-poles device
DB101270
CDB500019
(1) Without escutcheon.
(2) With escutcheon. Note: X and Y are the symmetry planes for a 3-pole device. A(*) An overhead clearance of 50 mm is required to remove the arc chutes.
: Datum.
An overhead clearance of 20 mm is required to remove the terminal block.
Ins Met En
ula al erg
ted ise
d
par par par
DB101279 DB101274
DB101280
DB101282 DB101287
View A detail.
Note: Recommended connection screws: M10 class 8.8. Tightening torque: 50 Nm with contact washer.
Dimensions MVS08 to MVS32 circuit breakers
and connection
DB101293DB101291DB101289
Draw-out 3/4-poles device
DB101295
DB101292
CDB500021
(*) Disconnected position.
(1) Without escutcheon.
Ins Met En
ula al erg (2) With escutcheon.
: Datum. ted ise
d Note: X and Y are the symmetry planes for a 3-pole device.
par par par
CDB
5000 Horizontal rear connection Detail
45 DB101301
CDB DB101297
5000 DB101282 DB101307
44
C
o
n
n
e
ct
io
n
s
DB101278 DB101298
DB10127
0
CDB500019
: Datum.
An overhead clearance of 20 mm is required to remove the terminal block.
DB10127
6
(*)
Disc
onne
cted
posit
ion.
Mou
ntin
g
on
bas
: Datum. (2) With escutcheon. Note: X and Y are the symmetry planes for a 3-pole device.
(1) Without
escutcheon. The safety clearances take into account the space required to remove the arc chutes.
Ins Met En
ula al erg
ted ise
d
par par par
CDB5000
47 Horizo 15 DB101315DB101311
View A
N c d connection
CDB5000
ntal 4 o detail. o screws: M10
46
Detail t m class 8.8.
Co rear 0 Vertical e m Tightening
conne 0(
nne ction
rear : e torque: 50
3 connect n Nm with
ctio DB101319
P) R d contact
ion
ns Detail
CDB500050DB101297
DB101314
DB101307 e e washer.
Dimensions Accessories
and connection
DB101350
DB101351
DB101375DB102 DB101368
077 Connectio One
n of conductor
only per
auxilary connection
wiring to point.
terminal External power supply module (AD)
block
DB117025
DB102076
DB101367
External
modules
Delay unit for MN release
Dimensions External modules
and connection
DB101386DB117024
Dimensions 400/2000 A (MVS08 to MVS20) 1000/4000 A (MVS25 to MVS40)
DB101387
Catalogue numbers and
order form
umbersand order form
Nomencl
ature F-2
EasyPact MVS F-3
Connection F-3 ET Trip System & accessories F-4 Remote operation F-5 Chassis locking and accessories F-7 Clusters F-8 Circuit breaker locking
and accessories F-9 Mechanical interlocking for source changeover F-10 Indication contacts F-11 Instructions F-12
0 N 3 M F 2 L
8
1 4
H N W 5 A
0
1
O 6 V
2 EasyPact MVS (from 800 to 4000A) Icu=Ics=Icw (1 sec)=50kA & 65kA
1
P 0 D
6
2
Q
0
2
R
5 Type Basic
3 protection
S
Protection+c
urrent
1L metering
1
3 2 1 1 1 1 AV Protection+v
D oltage
metering
Switch
disconnecto
r
Protections No. LI
protection LSI
protection LSIG
protection No
Example 2 MVS16H3MF0D protection for
2 5 6 0H3M F0 D
MVS16 switch disconnector
Type of installation Fixed
FW Draw-out
Operating
mechanism
Manually Switch disconnector
operated
ACB/SD
Electrical
200/240
VAC
Electrical
110/130
VAC
Electrical
380/415
VAC
Electrical
200/250
VDC
Electrical MCH + XF + MX
100/125 MCH + XF + MX
VDC MCH + XF + MX
Electrical MCH + XF + MX
MNO 48/60V DC MCH + XF + MX
PQRS Electrical MCH + XF + MX
T 24/30V DC MCH + XF + MX
Numbe
r of
poles 3
Poles 4
3P 4P Poles
Type based on breaking capacity Circuit
breaker/ switch disconnector
Icu=Ics=Icw(1sec)=50kA Circuit breaker/ switch
NH disconnector Icu=Ics=Icw(1sec)=65kA
08 Current rating 800A 1000A 1250A 1600A 2000A 2500A
10 3200A 4000A
12
16
20
25
32
40
E
xa
m
pl M MVS32N
e V 4EW6L 4
1 S 32 N E W 6 L
Catalogue numbers EasyPact MVSand order form
Connection 3
P 4
P
4 4
7 7
9 9
6 6
4 5
4 4
7 7
9 9
E46428 E46446 E46445 E46446 E46445
6 6
4 5 Horizontal
Fixed circuit breakers Rear connection (vertical or horizontal mounting) / Replacement kit (3 or 4 parts) mounting.
Installation
MVS2 manual
1735
800-2000 A Vertical Horizontal
4
2500/3200 A Vertical Horizontal 7 Interphase
9 barriers /
Vertical mounting.
6 Replacement kit
4000 A Vertical Horizontal 5
(3 parts)
4
7
9
6
Horizontal mounting. 5
Installation manual MVS21735
Draw-out circuit breakers Rear connection (vertical or horizontal mounting) / Replacement kit (3 or 4 parts)
(
1 CD
B50
003
p External sensors External sensor for earth-fault protection (TCE) / 1 part 8
DB1
a 053
60E
r 466
t 71E
955
) Sensor rating 400/2000 A 40
24-30 V DC 54440
33593
48-60 V DC 54441 34035 1000/4000 A
C
100-125 V DC 54442
o
110-130 V AC 54443 34036
v
200-240 V AC External54444
power supply module (AD) / 1 part
e
380-415 V AC 54445
r
(
1
p
a
r
t
)
Test equipments / 1 Part
33592
Catalogue numbers EasyPact MVSand order form
Remote operation
47893 200/240 V
47894 380/415 V
47896 DC 24/30 V
47888 48/60 V
F
47889 100/125 V or
dr
a
47890 200/250 V w
-
47891 o
E95169 E95170 E95169 E95170E95169 E95172 ut
ci
rc
ui
t
br
e
a
k
er
47849
Fi
x
e
d.
D
ra
w
-
o
ut
.
In
Terminal block (1 part) For fixed circuit breaker st
47074 all
For draw-out circuit breaker at
47849 io
Fixed. Draw-out. n
Installation manual MVS21736 m
Closing release (XF) Standard coil (1 part) AC 50/60 Hz 24/30 V DC, 24 V AC a
n
u
al
St
a
n
33659 DC 48/60 V DC, 48 V AC
d
ar
33660 100/130 V AC/DC
d
c
MVS15511 200/250 V AC/DC
oi
l
MVS15512 380/480 V AC
(1
p
MVS15513 Terminal block (1 part) For fixed circuit breaker
ar
t)
47074
A
C
50/60 Hz 24/30 V DC, 24 V AC For draw-out ci
DC 48/60 V DC, 48 V AC 100/130 V AC/DC 200/250 V AC/DC 380/480 V AC 47849
In
Terminal block (1 part) For fixed circuit breaker
st
MVS21736 all
at
io
n
33659 33660 33661 33662 33664 47074
m
a
n
u
al
MVS21736
Fixed. Draw-out.
E95
170 24/30 V DC, 24 V AC
e MN
U
n
d
er
v
ol 33668 DC 48/60 V DC, 48 V AC
ta
g 33669 100/130 V AC/DC
e
re 33670 200/250 V AC/DC
le
a 33671 380/480 V AC
s
e 33673 Terminal block (1 part) For fixed circuit breaker
(1
p 47074
ar
t)
A
C
5
0/
6 R (non-adjustable) Rr
(adjust
0
able)
H AC
For draw-out circuit breaker 48/60 V
z 50/60 33680
AC/DC 47849
Hz
Fixed. Draw-out. n
100/130 V
I DC 33684 33681
AC/DC
n m
200/250 V
s a
t n
a u
l a MN delay unit (1 part)
l l
a
t MVS21736
i MN delay unit
o
Catalogue numbers EasyPact MVS
and order form
Inst
allation manual
Shutter locking
block (for
replacement) / 1
part
“Disconnected” position locking / 1
part By
padlocks 2 parts for
VCPO 800/4000 A
Installation manual
Standard
3P
By Profalux keylocks
Profalux Types for
N/H/NA/HA
MVS21737
MVS21737 487
Installation manual 48723
MVS21737 4P
Clusters
1 disconnecting contact cluster for chassis (see table below) (part 1) Racking handle
33166
Rack
ing
hand
le
47944
Table : number of clusters required for the different chassis models
E95561 E95538
Catalogue numbers EasyPact MVSand order
form
CDB
Circuit breaker locking and accessories
5000 ocks 48535 c
59
E95
Profalux h
536
Installation a
CDB
5000 manual r
58C
DB5
g
0006 i
1DB MVS21736
1256 n
17E
4673 By Ronis keylocks g
1 lock with 1 key +Escutcheon
5E4
Ronis 1 lock with 1 key + adaptation kit 64928
6666
adaptation kit and h
2 locks 1 keys + adaptation a
kit
accessories64929
/
64931 n
Profalux 1 lock+ 1 key1 part d
P 42888
(without adaptation kit) l
2 locks 1 keys + adaptation kit
u Profalux 2 locks + 1 key
42878 e
s
64932
h 47940
b
Ronis 1 lock+ 1 key (without adaptation kit)
ut I
to n
41940
n s
lo t
Ronis 2 locks + 1 key (without adaptation kit) a
ck Escutcheon l
in Cover l
41950
g Blanking a
d plate t
Adaptation kit (without key locks)
ev Installation i
ic manual o
64925 n
e/
Fixed Draw-out
MVS21736
1 I
Escutcheon 48601 48603 m
p n a
ar s
Transparent Front cover
cover (IP - (3P / 4P) / 48604 n
t t 1 u
54) part
a a
l MVS Front cover l
l MVS21808
a
t MVS21736
48536 i
o
n Arc chute for EasyPact MVS / 1 part
Installation manual
MVS21736 m
a
n
u
a Installation
l manual
MVS21736
MVS21736
Spring
Mechanical operation counter / 1 part charging
handle / 1
By part
Pr
of
al
ux 3P 4P
ke Operation counter CDM
MVS2 4 MVS2180
yl Type N/NA 3x
1807 x 7
MVS2 4 MVS2180
Type H/HA 3x
1807 x 7
Mechanical interlocking for source
CD
changeover
B5
000
urce changeover
(1)
60
CD
Interlocking of 2 devices using cables
Choose 2 adaptation sets (1 for each device + 1 set of cables)
B5
000
53
1 adaptation fixture for EasyPact MVS fixed devices
M 47926
e
c
1 adaptation fixture for EasyPact MVS draw-out devices
h
a 47926 1 set of 2 cables
n
i 33209
c (1) Can be used with any combination of EasyPact MVS, fixed or draw-out devices.
a
l
i
n
t
e
rl
o
c
k
i
Installation manual MVS21738
n Interlocking of 3 devices using cables Choose 3 adaptation (including 3 adaptation fixtures + cables) 3 sources, only 1 device closed, fixed or draw-out
g devices
f 48610
o
r 2 sources + 1 coupling, fixed or draw-out devices
s
o
48609
MVS21738
Catalogue numbers EasyPact MVSand order form
Indication contacts
E4
666
1
E4
643 ON/OFF indication contacts (OF) / 12 parts
8E
466
89
ker
47849
1
c
h
a
n
g
e
o
v
er
c
o
nt
a
ct
(5
A
-
2
4
0
V)
4
7
0
8
0
W
iri
n
g
F
or
fix
e
d
ci
rc
ui
t
br
e
a
I uctions
n
s
t EasyPact MVS User Manual (English)
MVS2173
4
MVS2173
r Fixed & draw-out circuit breaker
5
MVS2173
Circuit breaker accessories
6
MVS2173
Chassis accessories
Catalogue numbers and order form EasyPact MVS
Order ref no: Date: Product and Switch-disconnectors Customer Order form
ref no:
OA No. Indication contacts OF - ON/OFF indication contacts Standard 1 block of 4 OF 10 A-240/380V AC Additional 1 block of 4 OF 6 A-240/380V AC
(to be filled by Order booking team) √
MVS
Rating A
Circuit
Circuit
breaker
breaker
N/
H
Type of equipment N Draw out with chassis Draw out without chassis
Fixed
Switch
A/
Disconn (moving part only)
H
ector
A
Trip System functions: 2I : Basic protection (long time + inst.) 5S : Selective protection (long time + short time + inst.) 6G : Selective + earth-fault protection
(long time + short time + inst. + earth-fault)
CDP - Escutcheon Standard
Notes:
Customer can provide only the reference no. of the product for the listed references. Kindly refer to product catalogue for list of references. Customer to fill this order form
for non-listed references. All breakers will be provided with 1 OF (4 c/o contacts), 1 SDE (trip contact), Escutcheon (Panel sealing frame) as standard. All draw-out
breakers/switches will be supplied with Chassis & safety shutter. For Electrical operated breakers/ switches, indicate the voltage ratings of MCH,XF & MX Refer to product
catalogue for available voltage ratings of MCH/XF/MX/MN & AD Module The orientation of customer connecting terminals can be changed at site from Horizontal to
vertical or vice-versa.
LVED211021EN 08-2018
䔀氀攀挀琀爀椀挀洀漀琀漀爀䴀䌀䠀昀漀爀䔀愀猀礀倀愀挀琀䴀嘀匀⸀