Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 809 views

    Concresive 2200: High Strength, Thixotropic, Epoxy Bedding Mortar

    Uploaded by

    Francois-

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Concresive 2200: High Strength, Thixotropic, Epoxy Bedding Mortar

    Uploaded by

    Francois-
    809 views4 pages

    Original Title

    Concresive 2200

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    809 views4 pages

    Concresive 2200: High Strength, Thixotropic, Epoxy Bedding Mortar

    Uploaded by

    Francois-

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    Concresive®2200 (formerly known as Samtec Bonder 45MP)

    High strength, thixotropic, epoxy bedding mortar

    Description
    Concresive®2200 is a non slumping epoxy bedding • Bedding tiles.
    compound and adhesive. It is a two pack, fine • Repairing concrete posts in-situ.
    aggregate filled, fast curing material, ideal for a • Fixing of surface ports for crack injection.
    variety of bedding, gap filling and concrete repair
    applications. Advantages
    • High strength.
    Concresive®2200 is a stiff but easily workable • Non-slump.
    compound that can be applied by either trowel, • Strong adhesion.
    • Impact resistant
    spatula or knife. It cures to give high mechanical
    • Chemical resistant.
    properties typical of epoxy compounds. It is
    • Non shrink.
    resistant to oils, greases, petroleum, salts, many • Epoxy based.
    acids and alkalis and most commonly met corrosive • Trowels to a smooth finish.
    media. It does not shrink on curing, and is designed • Easy to use.
    to be used when cured from below freezing point to • Supplied in pre-weighed units.
    60°C. Its impact resistance and mechanical • No bonding agent or primer required.
    strength is greater than that of concrete. • Water micible

    Packaging
    Primary uses
    Concresive®2200 is available in 3 kg (1.65 L) units.
    For surface repairs of fine cracks and spalls. For
    gap filling, grouting, bedding fixtures etc. For repairs
    Composition
    to arrisses without the use of form work. Wherever a
    Two-component epoxy-based mortar pre-filled with
    thixotropic epoxy mortar is required.
    selected fine aggregate.

    Typical application
    Typical properties
    • Bedding bridge beams or steel bridge bearings.
    Colour: Grey
    • Repairing surface defects or to honeycombing Mix ratio: 2.1:1
    concrete in horizontal, vertical or overhead Flashpoint: N/A
    situations. Compressive 55MPa @ 7 days (neat)
    strength: 85MPa @ 7 days (graded aggregate
    • Fixing slip bricks to concrete. loading)
    • Securing bolts into walls. Bond strength: 22 MPa @ 2 days
    • Dowel bars anchoring. 25 MPa @ 14 days
    Pot life: At 20°C : 20 minutes
    • As a gap filling adhesive.
    Work life: At 20°C : 90 minutes
    • Filling bolt pockets.
    Concresive®2200 (formerly known as Samtec Bonder 45MP)
    Chemical resistance Coverage
    Concresive®2200 has excellent resistance to the 1.65 litre is sufficient to cover 1- m² at 1.65mm
    following: most aqueous systems, sewage, urine, thickness.
    fresh water, sea water, diluted and concentrated
    alkalis, diluted acids, sulphur gases, mineral, Equipment care
    vegetable and animal oils and fats, ammonia and Clean with Cleaning Solvent No2 immediately after
    formaldehyde. use.

    Application Procedure Safety precautions


    Preparation As with all chemical products, care should be taken
    All loose particles, laitance, dust and grease etc., during use and storage to avoid contact with eyes,
    must be removed prior to application of mouth, skin and foodstuffs (which can also be
    Concresive®2200 tainted with vapour until product fully cured or dried).
    Treat splashes to eyes and skin immediately. If
    Mixing accidentally ingested, seek immediate medical
    The various packs has been designed to be readily attention. Keep away from children and animals.
    mixed by trowel. Where more than one pack is to be Reseal containers after use. For further information
    mixed at a time, a Mixal portable mixer (HD5 model) refer to the material safety data sheet.
    is suitable.
    Storage
    Application Store under cover out of direct sunlight and protect
    Knife or trowel Concresive®2200 to the required level from extremes of temperature. In tropical climates
    using the minimum of solvent on the trowel to aid the product must be stored in an air conditioned
    workability. The surface may be finished smooth by environment. Failure to comply with the
    use of a paint brush dipped in Cleaning Solvent recommended storage conditions may result in
    No2.or soapy water. Where a very deep recess is to premature deterioration of the product or packaging.
    be filled, it may be necessary to build up in layers. For specific storage advice, consult BASF
    Repairs may be camouflaged if required by covering Construction Chemicals SA Technical Services
    surface with cement powder before full cure is Department.
    affected.

    Working temperature
    Concresive®2200 will cure at temperatures as low as
    0°C, although at low temperatures cure is severely
    retarded.
    Concresive®2200 (formerly known as Samtec Bonder 45)
    Note Quality and care
    Field service, where provided, does not constitute All products originating from BASF Construction
    supervisory responsibility. For additional information Chemicals’ SA facility are manufactured under a
    contact your local BASF Construction Chemicals SA management system independently certified to
    representative. BASF Construction Chemicals SA conform to the requirements of the quality,
    reserves the right to have the true cause of any environmental and occupational health & safety
    difficulty determined by accepted test methods. standards ISO 9001:2000.

    Whilst any information contained herein is true, accurate and represents our best knowledge and experience, no w arranty is given or
    implied with any recommendations made by us, our representatives or distributors, as the conditions of use and the competence of
    any labour involved in the application are beyond our control.
    As all BASF’s technical datasheets are updated on a regular basis it is the user's responsibility to obtain the most recent issue.
    BASF Construction Chemicals South-Africa (Pty) Ltd
    852 Sixteenth Road, Midrand
    P.O. Box 420, Westonaria, 1780
    PO Box 2801, Halfway House, 1685
    11 Pullinger Street, Westonaria, 1779 Tel: +27 11 203 2405
    Tel: +27 11 754 1343
    Fax: +27 11 754 1105 Website : basf-cc.co.za

    You might also like