SCHEDULE OF QUANTITIES

Name of Work : Construction of Single storey Prefabricated Puf-panel Insulated Lab. bldg. at IIT-Jammu. .
[QTY.;-- 01No.--LAB BUILDING ]

Sl.No. Description Qty. Rate Unit Amount

ELECTRICAL WORKS :
Subhead-I (Wiring, fitting and Electircal Panel)

Wiring for light point/fan point/exhaust fan point/call bell

point with 1.5 sqm/mm FRLS PVC insulated copper
conductor single core cable in surface/recessed steel
1 conduit, with modular switch, module plate, suitable GI
box and earthing the point with 1..5 sq.mm . FRLS PVC
insulated copper conductor single core cable etc. as
required.

Group C 20 Pts. 1500 Point 30000

Note :- All surface pvc conduits shall be covered with
sheet matching to the interior walls of pre-fabricated
structure.
Wiring for circuit /sub main wiring alongwith earth wire
with the following sizes of FRLS PVC insulated copper
2
conductor, single core cable in surface/recessed steel
conduit as required.

a 2x1.5 sq.mm +1x1.5 sq.mm earth wire (For circuit wiring) 100 Mtrs 350 Meter 35000
b 2 x6 sq.mm + 1.6 sq.mm earth wire (for AC Outlets) 200 Mtrs 400 Meter 80000
Wiring for light/power plug with 2x4sq.mm FRLS PVC
insulated copper conductor single core cable in
3 surface/recessed steel conduit alongwith 1 No. 4 sq.mm 200 Mtrs 450 Meter 90000
FRLS PVC insulated copper conductor single core cable
for loop earthing as required.
Supplying, installatioon, testing and commissioning of
4 1200 long LED fitting with cover complete as required. 20 Nos 9500 Each 190000
(Make;-Osram/Philips /Bajaj/Surya/Equivalent )
Supplying and fixing of 200KVA -3phase , 220-
440V/Frequency-50Hz connection to all internal
5 1 Nos 1050000 Each 1050000
electrical points complete.(Make;- As per standard
availibilty)

Supply installation testing and commissioning of 40-45W

(System Wattage) LED street light Luminaries in high
pressure die cast LM6 Aluminium /extruded Aluminium
housing for effective thermal Management, sturdiness
and better aesthetics Luminaries should be dedicated
street light optics for good uniform lighting. UV stablized
6 4 Nos 13500 Each 54000
Polycarbonate /Glass cover mopre than 85 lumens
per/wat. Hight ingress protection of OP 65/66 for
complete luminaries. Sutiable for side entry with G (B
CLASS) bracket of 40mm dia pipe of length 2 mtrs etc.
complete as required. (Make-OSRAM/Philips
/Bajaj/Surya/ equivalent.).

Supplying, installation, testing and commissioning of

1200 mm sweep ceiling fan, 5 Star rating i/c wiring the
down rod of standard length (upto 30cm) with 1.5sqm..
7 10 Nos 4500 Each 45000
FR PVC insulated copper conductor single core cable as
required. (Make :- Crompton
Greaves-/Usha/Khaitan/Bajaj/Surya/Equivalent ).
Supplying and fixing stepped type electronic fan
regulator on the existing modular plate switch box
8 8 Nos. 500 Each 4000
inclduing connections but excluding modular plate etc.
as requried.
Supplying & fixing polycarbonate box alongwith 1 No.
SPNMCB of 25 Amp i/c conneciton etc. complete as
9 10 Nos. 4100 Each 41000
rquired (Make Sinmtex/Stanlec/Hensel/equivalent )
make size (200mm x 250mm)
Supplying, installation, Testing & Commissioning of
250mm sweep light duty fresh air fan, including making
10 opening in then wall and making good the damages, 2 Nos. 3100 Each 6200
including making connecitons etc. as reqd.
(Bajaj-/Khaitan/Usha/equivalent ).
 Supplying, installation, testing and commissioning of
cubical type wall mounted double door meter cum
distribution board having window with Galls for energy
meter suitble for 415V, 3 phase, 4 Wire 50 Hz AC supply
system fabricated in compartmentalized design from
CRCA sheet steel of 2mm thick for frame wirk and voers,
2mm thick for gland plates i/c cleaning and finishing
complete with 7 tanks process for poweder coating in
11 approved shade, having 150 Amp capacity TPIN
Aluminium Alloy bus bars of high conductivity DMS/SMC
bus bar supports, twih 2 Nos. earth stud, connections
from main bus bar to switch gears with required size of
copper wire and control wiring with 1.5sqm. mm PVC
insulated FRLS copper conductor single core cable,
cable alleys, cable gland plates in two half and providing
and fixing following switch gears: (Minimum size of panel
- 600mm x 800mm x 200mm)

Incoming :
3 nos. Phase indicatioin LED lamps with 2 AMP back up
MCB, breaker ON/OFF indicating light with 2A MCB 2A
MCB.
Outgoing:
25A SP MCB(10kA)-2 Nos
6/16A SP MCB (10kA) - 10 Nos. 1 Set 75000 Set 75000
Supplying and fixing brass batten/angle PVC
12 bolders/including conection etc. as required 10 Nos. 250 Each 2500
(Anchor/cona/Kinjal/equivalent)
Supplying and fixing call bell/buzzer suitable for single
13 phase, 230 volts, complete as required. 0 Nos. 250 Each 0
(Anchor/cona/Kinjal)

earthing with GI earth pipe 4.5 meter long, 40 mm dia

inclduing accessories and providiing masonry enclosure
14 25 Sets 45000 Set 1125000
with cover plate having locking arrangemnt and watering
pipe etc. with charcoal /coke and salt as requried.

Providing and laying earth connection earth electrode

with 6 SWG dia GI wirehin 25mm dia G.I. pipe earth
15 25 Mtrs 850 Metre 21250
electrode including connection with G.I. thimble
excavation and re-filling required.
Providing and fixing 6 SWG dia G.I. wire on surface or in
recess for loop earthing alongwith existing
16 25 Mtrs. 125 Meter 3125
surface/recessed conduit/sub main wireing/cable as
required
TOTAL OF SH :- 1 2852075.00
NOTE;- Applicable Extra GST@18% @Cess@1%
 SCHEDULE OF QUANTITIES

Name of Work : Construction of Single storey Prefabricated Puf-panel Insulated Lab. bldg. at IIT-Jammu.
[QTY;- 01No.-- LAB BUILDING]

Sl.No. Description Qty. Unit RATE BASIC AMOUNT

Earth work in excavation by mechanical means (Hydraulic

Excavator)/manual mans in foundaiton trenches or not
exceeding 1.5m in width or 10 sqm on plan) including
1 dressing of sides and ramming of bottoms, lift upto 1.5m, 650.00 Cum 450 292500
including getting out the excavated soil and dispoal of
surplus excavatred sopild as directed, within a lead of
50m.

Excavating trenches of required width for pipes cables

etc. including excavation for sockets, and dressing of
sides, ramming of bottoms, depth up to 1.5m, including
getting out the excavated soil, and then returning the soil
2
as required, in layers not exceeding 20cm in depthm,
including consolidating each deposited layer by ramming,
watering etc. and disposing of surplus excavated soil as
directed, within a lead of 50m:
2.1 All kind of soil
Pipes, cables etc. exceeding 80mm dia but not exceeding
2.2 100 Metre 350 35000
300mm dia.

Provision for cleaning land from trees/wedges etc, Cutting

3(i) & Levelling of Ground for prefab building Size;- 25mtr x 1 lumpsum 300000 300000
30mtr site complete .
Filling available excavated earth (excluding rock) in
trenches, plinth, sides of foudnations etc. in layers not
3(ii) exceeding 20cm in depth, consolidating each deposited 600.00 Cum 250 150000
layer by ramming ant watering, lead upto 50m nad lift
upto 1.5m.

Supplying and filling in plinth with new-earth or sand

4 under floors, including watering, ramming, consolidating 10.00 Cum 2550 25500
and dressing complete.

Providing and laying in position cement concrete of

5 specified grade excluding the cost of centering and
shuttering - All work upto plinth level
1:5:10 (1 cement:5 coarse sand : 10 graded stone
5.1 30.00 Cum 12500 375000
aggregate 40mm nominal size) -
1:4:8 (1 Cement : 4coarse sand : 8graded stone
5.2 70.00 Cum 10500 735000
aggregate 40mm nominal size)
Making plinth protection 50mm thick of cemnet concrete
1:3:6 (1 cement:3 coarse sand : 6 graded stone
6 aggregate 20mm nominal size, well rammed and 5.00 Sqm 1450 7250
consolidated and grouted with find sand, including
finishing the top smooth.

Provding and laying in position specified grade of

reinforced cement concrete, excluding the cost of
7
centering, shuttering, finishing and reinforcement. All
work up plinth level:
1:1.5:3 (1 cement :1.5 coarse-sand : 3graded stone
7.1 300.00 Cum 11000 3300000
aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc.

8
and removal of form for :
Lintels, beas, plinth beams, griders, , Retaing walls
8.1 500.00 Sqm 750 375000
,bressumers and cantilevers

Steel reinforcement for R.C.C. work including

9 straightening, cutting bending, placing in position and
binding all complete upto plinth level.
9.1 Thermo-Mechanically Treated bars 40000.00 kg 85 3400000

Brick work with common burnt clay F.P.s (non modular)

10
bricks of class designation 7.5 in foundation and plinth in :
10.1 Cement mortar 1.6.(1 cement : 6 coarse sand) 150.00 Cum 12000 1800000

Structural steel work rived, bolted or welded in built up

sections,columns, trusses and framed work, including
11 20000.00 Kg 140 2800000
cutting, hoisting, fixing in position and applying a priming
coat of approved steel primer all complete.
Providing and fixing mild round holding down bolts with
12 nuts and providing and fixing mild steel round holding 300.00 Kg 200 60000
down bolts with nuts and washer plates complete.

S/A 2-COATS OF SYNTHATIC ENAMEL PAINT

13 TREATMENT - ON PREFAB STEEL STRUCTURE
COMPLETE.
2-COATS OF SYNTHATIC ENAMEL PAINT
13.1 20000.00 Kg 7.5 150000
TREATMENT
 Providing and laying rectified Glazed ceramic Wall & floor
tiles of size 300x300mm of 1st quality conforming to
IS:15622, of approved make, in white color shade laid on
20mm thick Cement Mortar. 1:4 (1 Cement:4 Coarse
sand), including pointing hte joints with white cement and
14 matching pigments etc. complete.The tiles will be fixed on 50.00 Sqm 1750 87500
the 3side-walls in each toilet .

Providing and fixing white vitreous china pedestal type

water closet (European type W.C. Pan) with seat and lid.
10 litre low level white P.V.C. flushing cistern including
20 flush pipe with manually controlled device (handle lever),
conforming to IS:7231, with all fitting and fixtures
complete,including cuttiong and making good the walls
and floors whereever required.

20.1 W.C. Pan with ISI marked white solid plastic seat and lid 4.00 Each 6500 26000

Providing and fixing white vitreious china flat back or wall

corner type lipped front urinal basin of 30x260x350 mm
and 340x410x265mm sizes respectively with flushing
21 cistern with sandard flush pipe and CP brass spereaders
with brass unions ad GI clamps complete, inlucidng
painting of fittings and brackets, cutting and making good
hte walls and floor whereever equired:

21.1 One urinal basin with 5 liter white P.V.C. flushing cistern. 4.00 Each 7500 30000

Providing and fixing wash-basin with CI brackets, 15 mm

CP brass pillar taps, 32mm CP brass waste of standard
22
pattern, including painting of fittings and brackets,cutting
and making good the wall wherever require.

White Vitrious China Flat back wash basin size

22.1 4.00 Each 6000 24000
550x400mm with single 5mmC.P brass pillar tap.

Providing and fixing white vitreous china pedestal for

23 wash basin completely recessed at the back for the 4.00 Each 7000 28000
reception of pipes and fittings.

Providing and fixing Stainless Steel A ISI 304 (18/8)

kitchen sink as per IS:13983 with C.I brackets, CP brass
24 waste of sandard patern and stainless steel plug 40mm
including panting of fittings and brackets, cutting and
making good the walls wherever required :
Kitchen sink without draing board 470x420mm bowl depth
24.1 4.00 each 9500 38000
178 mm

Providing and fixing P.V>C. waste pipe for sink or was

25
basin including PVC waste fittings complete.
Flexible pipe
25.1 32mm dia 4.00 Each 350 1400
25.2 40mm dia 4.00 Each 550 2200

Providing and fixing mirror of superior glass (of approved

quality) and of required shape and size with plastic
26
moulded frame of approved make and shade with 6mm
hard board backing:
26.1 Rectangular shape 453x357mm 4.00 Each 1100 4400

27 Providing and fixing soil, waste and vent pipes:

27.1 100mm dia
Centinfugally case (spun) iron socket & spigot (S&S) pipe
27.11 100 Mtr 1150 115000
as per IS:3989

28 Providing and fixing plain bend of required degree

28.1 100 mm dia
28.11 Sand caste iron S&S as per IS:3989 4 Each 650 2600

Providing and fixing single equal junction of required

29
degree:
29.1 100x100x100mm 4 Each 900 3600
29.11 Sand cast iron S & S as per IS-3989

Providing lead caulked joints to sand cast

30 iron/centrifugally cast(spun) iron pipes and fittings of
diameter:
30.1 100mm dia 0 Each 0 0

Providing and fixing trap of self cleanising design with

screed down orhinged grating with or without vent arm
31
complete, including cost of cutting and making good the
walls and floors :
100mm inlet and 100mm outlets Sand cast iron S7 S as
31.1 4 each 925 3700
per iS:3989.
 Providing and fixing PTMT liquid soap container 109mm
wide, 125mm high and 112mm distance from wall of
32 standard shape with bracket of the same materials with 4 each 350 1400
snap fittings of approved quality and colour weighing not
less than 10-5 gms.

Providing and fixing PTMT towel rail complete with

brackets fixed to wooden cleats with CP brass scres with
33
concealed fittings arrangemtn of approved quantity and
colour

450mm long towel rail with total length of 495 mm 78mm

33.1 wide and effective height of 88m, weighing not less than 4 each 650 2600
170 gms.

Providing and fixing Cholrinated Polyvinyl Cholride

(CPVC) pipes, having thermal stability for hot & cold
water supply including all CPVC plain & brass threaded
35 fitting i/c fixing the pipe with clamps at 1.00 m spacing.
This incldues jointing of pipes & fittings with one tep
CPVC solvent cemnet and testing of joints complete as
per direction of Engineer-in-charge.
35.1 Internal work - Exposed on wall 150.00 Metre 750 112500

Making connection of GI distribution branch with GI main

36 of following sizes by providing and fixing tee, including
cutting and threading the pipe etc.
36.1 25 to 40mm nominal bore 0.00 Each 950 0

Providing an fixing brass ferrule with C.I mounth cover

37
including boring and tapping the main:
37.1 15mm nominal bore 4.00 Each 450 1800

Proving and fixing uplasticised PVC connection pipe with

38 brass unions:
38.1 30cm length
38.11 15mm nominal bore 4.00 each 200 800

47.1 0
With common burnt clay F.P.S. (non modular) bricks of
47.1.1
class designation 7:5

Making Underground storage sump tank of capacity

-50000ltr, Septic tank-1No. & soakage-pit-1No.( of 2.5 m
48 diameter 3.0 meter deep ) with 45x45 cam dry brick
honey comb shaft with bricks and S.W. drain pipe 100mm
diamter, 1.8 m long complete as per standard design.

With common burnt clay F.P.S. (non modular) bricks of

48.1 1.00 lumpsum 300000 300000
class designation as per availibilty
49 0
50 0
51 0

Supply & errection of 4Nos. Turbovents on the roof with

52 polycarbonate sheet base having 10air-changes per hour 4.00 Nos. 12500 50000
complete.
Supplying & fixing of following type ISI marked fire
53 extinguisher including bracket etc. as required (Make:
Lifeguard/safeguard/G Tech/Cease fire)
4.5kg CO2 cylinder(8Nos.) + 6KG Dry Powder (ABC
53.1 16.00 Nos. 8500 136000
stores pressure)-(8Nos)

Providing and fixing Double leaf Door frames & shutters

in all Building Units Rooms ;-
Frames shall be made from pressed steel 4-side frame
using CR-steel of 1.5mm thick overall size of section shall
be 2000mm X 2154MM . The section is welded at corner
with welding machine & diagonal braces of 40 X 40 X
6MM angle , 3mm gusset plates at the junctions &
corners , all necessary fittings complete including
54 applying priming coat of approved steel primer . The door 3.00 Nos. 45000 135000
frames will be fixed to column with suitable fastners. The
Doors will be fixed with handle & kundi(in both sides)
complete. The
door sutters of Double -leaf shall be made out with GI-
precoated sheets (0.6mm thk.) both side of puf . the
thickness of Shutter shall be minimum of 35mm all
complete as per manufacturer's specification and
directions of Engineer-in-charge.
 Providing and fixing in Toilet Single leaf Door frames
& shutters in all Building Units Rooms ;-
Frames shall be made from pressed
steel 4-side frame using CR-steel of 1.5mm thick
overall size of section shall be 2000mm X 2154MM .
The section is welded at corner with welding machine
& diagonal braces of 40 X 40 X 6MM angle , 3mm
gusset plates at the junctions & corners , all
necessary fittings complete including applying
55 5.00 No. 27500 137500
priming coat of approved steel primer . The door
frames will be fixed to column with suitable fastners.
The Doors will be fixed with handle & kundi(in both
sides) complete.
The door sutters of Single- leaf shall be made out
with GI-precoated sheets (0.6mm thk.) both side of
puf . the thickness of Shutter shall be minimum of
35mm all complete as per manufacturer's
specification and directions of Engineer-in-charge.

Providing & fixing Automotive ducco painted

Aluminium annodized sliding windows with tubular
grills , locking arrangement , glass - panes of
minimum 5.5mm thickness provided with sun
protection /rain protection (chajjas) arrangement &
55(i) 2.00 No. 18000 36000
mosquito proof mesh complete . All Aluminium
sections -- should confirm to IS: 1948-1961,IS: 733,
IS:1285 & IS:1868. The complete work will be carried
out as per manufacturer's specification and
directions of Engineer-in-charge.

Providing and installing prefabricated sandwich Lloyd Puf

Panel manufactured with continuous-line method
comprising of on two faces PPGL (galvalume) colour
coated 0.5mm TCT sheet and CFC freeclose cell,lameller
based high density rigid polyurethane foam of high
density (40 + 15 kg/m3) having a thermal conductivity
value of 0.023 w/mk and of required thickness
sandwiched between the two galvalue sheets. The outer
and inner galvalue sheet of 0.45 mm TCT steel 550 Mpa
56
shall have a coating mass of 150 g/sqm zinc aluminium a
alloy coating total of both sides as per AS-1397 and
finished with 20 micron colour coating of SMP polyester
wuality paint as per AS/NZS-2728:1997 (Category-3) over
a 5 micron primer on exposed side and a back coat of 5
microns on inner side over a 5 micron primer. The panels
should be of required length and requried width with
maximum width upto 1190 mm with tongue & groove
configuration.

The prefabricated panels shall be fixed directly to the girth

using self drilling fasteners. The metal sheet shall
conform to IS:513.AS-1397 & 2728. the polyurethane
insulation shall conform to IS:12436. The rate include
cost of supply & errection including all accessories
requried to complete the work. The rate of the item is
inclusive of all materials, erection accessories, incidental
charges, cost of dash fasteners etc. cost of making
provision of doors, windows, ventilators etc. For payment
finished Rockwool sand wich panel shall be measured.
No deduction shall be made for opening /cutouts etc..

For Roof panels with 80 (80/120)mm thick Roofing panels

having finished with 0.5mm thick TCT Galvalume Hi-rib
shet on outer side and 0.5mm TCT Plain Galvalume
sheet on inner side including miscellaneous expenses of
56.1 650.00 Sqm 2850 1852500
fixing accessories such as Self-tapping self drilling screws
etc. complete .Note ;- 5% roof area to be covered with
Double layor 2mm thick translucent Polycarbonate
sheet in matching profile complete .

For wall panels with 80mm thick wall panels finished with
0.5 mm thick TCT Galvalume Plain sheet with small ribs
on both sides with male-female/tongue & groove
56.2 350.00 Sqm 3650 1277500
arrangement complete including miscellaneous expenses
of fixing accessories like self tapping self drilling screws
etc.complete as per direction of Engineer-in-Charge.

Providing & Fixing floor U-channel, flashings , corner-

pieces, gutter, downspouts etc. made of 0.50 mm TCT
57 Galvalume color coated plain sheet complete fixed with 300.00 Sqm 750 225000
stitching screws etc. complete as per direction of
Engineer-in-Charge.

Providing & Fixing manually operated GI - Rolling Shutter

57 with supporting frame & top cover complete as per 90.00 Sqm 21500 1935000
direction of Engineer-in-Charge.
58 BASIC TOTAL PRICE 20375250
NOTE;- APPLICABLEXTRA GST@18% Extra & Cess@1%