www.swagelok.

com

To o l s a n d A c c e s s o r i e s

P ro d u c t s
■ Hand, bench top, and electric tube benders

■ Preswaging tool and hydraulic swaging units

■ Tee, ratchet, and open-end wrenches

■ Accessories including tube and hose cutters, deburring

tools, liquid leak detectors, and thread lubricants and sealants
2 Tools and Accessories

Contents

Tube Benders

Bench Top . . . . . . . . . . . . . . . . . . . . . . . 3

Electric . . . . . . . . . . . . . . . . . . . . . . . . . 3

Hand . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Swaging Units

Multihead Hydraulic . . . . . . . . . . . . . . . 5

Air-Actuated Hydraulic . . . . . . . . . . . . 5

Preswaging Tool . . . . . . . . . . . . . . . . . . 5

Wrenches

Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Ratchet . . . . . . . . . . . . . . . . . . . . . . . . . 6

Open End . . . . . . . . . . . . . . . . . . . . . . . 7

Accessories

Groove Cutter . . . . . . . . . . . . . . . . . . . . 8

Hose Cutters . . . . . . . . . . . . . . . . . . . . . 8

Tube Support System . . . . . . . . . . . . . 8

Tube Cutter . . . . . . . . . . . . . . . . . . . . . . 8

Tube Deburring Tools . . . . . . . . . . . . . . 8

Tube Gripper Pad . . . . . . . . . . . . . . . . . 8

Gap Inspection Gauge . . . . . . . . . . . . . 9

Tube Sawing Guide . . . . . . . . . . . . . . . 9

Liquid Leak Detectors . . . . . . . . . . . . .10

Thread Lubricants . . . . . . . . . . . . . . . .11

Sealants . . . . . . . . . . . . . . . . . . . . . . . .12
 Tools and Accessories 3

Tube Benders

Swagelok benders provide high-quality bends on fractional

and metric tubing made from materials that can be used with
Swagelok tube fittings. These easy-to-use tube benders reduce
installation time and effort as well as the potential for wrinkling
or other damage to the tubing during bending.

Bench Top Tube Benders Electric Tube Benders

Features Features
■ CE compliant
■ Rugged, lightweight
■ Electronic control
aluminum construction
■ 1 to 180° bending range ■ One bend shoe for 1, 1 1/4,
1 1/2, and 2 in. sizes
■ 1/2 to 1 in. OD (0.035
■ One bend shoe for 25, 32,
to 0.120 in. wall thickness)
and 12 to 30 mm OD (1 to 3 mm 38, and 50 mm sizes
wall thickness) tubing range
■ Metal carrying case
for storage
■ CE compliant

Ordering Information
Select a basic ordering number. Select a tool kit designator.

Bender Type Ordering Number Tool Kit Designator

Bench Top Bench Top
Manual MS-BTB-M Fractional bend shoes and rollers -FKIT
(1/2, 5/8, 3/4, 7/8, and 1 in.)
Electric—110 V (ac) MS-BTB-1
Metric bend shoes and rollers
Electric—230 V (ac) MS-BTB-2 -MKIT
(12, 16, 18, 20, 22, and 25 mm)
Electric Electric
115 V (ac) 50/60 Hz Fractional bend shoe, roller towers,
MS-TBE-1
Maximum current: 13A and tube clamps -FKIT
230 V (ac) 50/60 Hz (1, 1 1/4, 1 1/2, and 2 in.)
MS-TBE-2
Maximum current: 7A Metric bend shoe, roller towers,
Example: MS-BTB-1 and tube clamps -MKIT
(25, 32, 38, and 50 mm)
Example: MS-BTB-1-1-E-FKIT
Select a power cord designator (electric models).

Power Cord Option Designator These benders come with an English language user’s
North America—110 V (ac) -1-E manual. To order a bench top bender with a user’s manual in
another language, see the Bench Top Tube Benders catalog.
North America—230 V (ac) -2-E
To order an electric tube bender with a user’s manual in
Japan/Taiwan—110 V (ac) -3-E another language, contact your independent Swagelok sales
Japan/Taiwan—230 V (ac) -4-E and service representative.
United Kingdom—110 V (ac) -5-E
United Kingdom—230 V (ac) -6-E
Europe—230 V (ac) -7-E
Australia / New Zealand—230 V (ac) -8-E
Example: MS-BTB-1-1-E
4 Tools and Accessories

Hand Tube Benders

Swagelok hand tube benders provide consistent, high-quality Ordering Information

bends in tubing made from materials that can be used with
Swagelok tube fittings. Tube Diameter  Bend Radius
in. mm Ordering Number
Features
1/4  9/16 — MS-HTB-4T
■ The hand tube bender is available in 1/4, 5/16, 3/8, and
1/4  3/4 — MS-HTB-4
1/2 in., as well as 6, 8, 10, and 12 mm tubing sizes.
5/16  15/16 — MS-HTB-5
■ Clevis handle design provides enhanced leverage for bends
greater than 90°. 3/8  15/16 — MS-HTB-6T
■ Roll dies reduce bending force and tube ovality, as 1/2  1 1/2 — MS-HTB-8
compared to conventional slide block design. — 6  15 MS-HTB-6M
■ 1 to 180° bending range.
— 8  24 MS-HTB-8M
— 10  24 MS-HTB-10M
— 12  38 MS-HTB-12M

Swaging Units

Multihead Hydraulic Swaging Unit (MHSU)

Features
The Swagelok MHSU:
■ preswages Swagelok ferrules onto tubing
■ must be used to install 1 1/4, 1 1/2, and 2 in. and 28, 30, 32,
38, and 50 mm Swagelok tube fittings
■ provides Swagelok tube fitting connections that are 100 %
gaugeable upon initial installation
■ is available with interchangeable die heads to install 1/2 to
2 in. and 12 to 50 mm Swagelok tube fitting sizes
■ places no initial strain on nut or fitting body threads or on
body seal surfaces
■ is available with a tube marking feature to indicate when tube Ordering Information
is properly bottomed—standard with 1 in. (25 mm) and over
tooling; optional with up to 1 in. (25 mm) tooling MHSU Ordering Number
MHSU Only (Unit, hydraulic hose, retaining ring pliers,
■ is available with a support base safety glasses, and instructions)
■ fits neatly in a rugged carrying case Up to 1 in. unit MS-MHSU-U-E
■ reduces assembly and installation time and operator error.
1 in. and over unit MS-MHSU-O-E
MHSU with Tooling Kit (MHSU only, die head sets, and gap
inspection gauges)
This tool comes with a tooling kit and an English language
user’s manual. To order a separate tooling kit or a tool with a Fractional up to 1 in. unit MS-MHSU-U-E-FKIT
user’s manual in another language, see the Hydraulic Fractional 1 in. and over unit MS-MHSU-O-E-FKIT-M
Swaging Units, Multihead (MHSU) catalog, or contact your
Metric up to 25 mm unit MS-MHSU-U-E-MKIT
independent Swagelok sales and service representative.
Metric 25 mm and over unit MS-MHSU-O-E-MKIT-M
 Tools and Accessories 5

Air-Actuated Hydraulic Swaging Unit (AHSU)

Features
The Swagelok AHSU:
■ preswages Swagelok ferrules onto tubing
■ provides Swagelok tube fitting connections that are 100%
gaugeable upon initial installation
■ requires only one unit with interchangeable tooling to
swage 1/4 to 1/2 in. and 6 to 12 mm Swagelok tube fitting
ferrule sizes
■ places no initial strain on nut or fitting body threads or on
body seal surfaces
■ requires no threading of nut on or off the tooling
■ fits neatly in a rugged carrying case
■ reduces assembly and installation time and operator error. Ordering Information
AHSU Ordering Number
This tool comes with a tooling kit and an English language AHSU Only (Unit, screwdriver, retaining ring pliers, adapter plates,
user’s manual. To order a separate tooling kit or a tool with a safety glasses, and operating instructions)
user’s manual in another language, see the Hydraulic AHSU only MS-AHSU-E
Swaging Unit, Air-Actuated (AHSU) catalog, or contact your
AHSU with Tooling Kit (AHSU only, die head sets, and gap
independent Swagelok sales and service representative.
inspection gauges)
1/4, 3/8, 1/2 in. unit MS-AHSU-E-FKIT
6, 8, 10, 12 mm unit MS-AHSU-E-MKIT

Preswaging Tool

For Swagelok tube fitting Ordering Information

installations in close
quarters, the Swagelok Fractional Metric
Tube OD Tube OD
preswaging tool is a
Size Ordering Size Ordering
convenient accessory. in. Number mm Number
1/16 MS-ST-100 3 MS-ST-3M0
Features 1/8 MS-ST-200 4 MS-ST-4M0
The preswaging tool: 3/16 MS-ST-300 6 MS-ST-6M0
1/4 MS-ST-400 8 MS-ST-8M0
■ preswages ferrules onto the tube
5/16 MS-ST-500 10 MS-ST-10M0
■ enables the installer to work in a more open, safe area 3/8 MS-ST-600 12 MS-ST-12M0
■ makes it possible to complete the installation by following 1/2 MS-ST-810 14 MS-ST-14M0
retightening instructions for Swagelok tube fittings. 5/8 MS-ST-1010 15 MS-ST-15M0
3/4 MS-ST-1210 16 MS-ST-16M0
7/8 MS-ST-1410 18 MS-ST-18M0
1 MS-ST-1610 20 MS-ST-20M0
1/16 female MS-ST-1F0 22 MS-ST-22M0
1/2 female MS-ST-8F0 25 MS-ST-25M0
6 Tools and Accessories

Wrenches

Tee Wrench Ratchet Wrench

The tee wrench provides positive back-up support when The ratchet wrench is designed for use on Swagelok nuts for
installing Swagelok union tees and crosses. fitting installation.

Features Features
■ Allows user to hold fitting body firmly and precisely ■ 11 fractional and metric sizes are available.
■ Is available in a variety of sizes ■ 1/12 turn ratchet facilitates use in close quarters.
■ Fits and carries easily in tool box, pouch, or belt ■ Heavy-duty construction includes:
■ Features a handle with vinyl, slip-resistant sleeve and ■ heat-treated, black oxide-plated steel handle
generous gripping area
■ black-oxide plated steel jaws
■ Holds tee in various orientations
■ stainless steel spring and fasteners.

Ordering Information Ordering Information

For Swagelok Gaugeable Union Tees and Crosses Tube Fitting Ordering Wrench
Size Number Length
Sizes Ordering Number Tee Cross Dimensions, in.
1/4 in. and 6 mm MS-TW-4   1/8 MS-RW-200
  5 3/8
5/16 and 3/8 in. and 8 mm MS-TW-6 3/16 MS-RW-300
10 mm MS-TW-10M  ➀
1/4 MS-RW-400
1/2 in. and 12 mm MS-TW-8   5/16 MS-RW-500 7 1/4
➀ Use MS-TW-8 on the 10 mm Swagelok cross.
3/8 MS-RW-600
1/2 MS-RW-810 10 1/8

Dimensions, mm
3 MS-RW-3M0 136
6 MS-RW-6M0
8 MS-RW-8M0 184
10 MS-RW-10M0
12 MS-RW-12M0 257

Ratchet Wrench Pouch

A vinyl pouch is available
— MS-RWP
for holding up to four
Swagelok ratchet wrenches.
 Tools and Accessories 7

Open End Wrenches

Features
■ Swagelok open end wrenches are available in body and
nut styles.
■ These wrenches are designed to install Swagelok tube
fittings (1 1/4, 1 1/2, and 2 in.; 32, 38, and 50 mm sizes) E
after assembly using Swagelok’s hydraulic swaging unit.
■ The body wrench is box ended and can be used with
shapes or hex bodies. A
■ The nut wrench has a multiple internal hex to allow easy
fixturing of the nut when space is limited. Body Wrench
■ The hole in the wrench head enables wrenches to be
secured by a lanyard for installations in elevated areas.
■ The telescoping feature of the knurled handle provides
C
additional leverage when needed. D

Nut Wrench

Nut Wrench
Dimensions
Fitting
Size Ordering Number A C D E Weight
Dimensions, in. lb
1 1/4 MS-NW-20(1.88) 3.16 18.0 22.8 0.73 3
1 1/2 MS-NW-24(2.25) 3.88 26.1 33.2 0.99 6
2 MS-NW-32(3.00) 5.06 32.5 42.0 1.25 11

Dimensions, cm kg
32 MS-NW-32M(50M) 8.53 46.2 58.4 1.85 1.4
38 MS-NW-38M(55M) 10.1 66.6 84.6 2.51 3.2
50 MS-NW-32(3.00) 12.9 82.6 106.7 3.18 5.0

Body Wrench
Dimensions
Fitting Flat
Size Size Ordering Number A C D E Weight
Dimensions, in. lb
1 11/16 MS-BW-20(1.69)
1 1/4 3.16 18.0 22.8 0.73 3
1 3/4 MS-BW-20(1.75)
2 MS-BW-24(2.00)
1 1/2 3.88 26.1 33.2 0.99 6
2 1/8 MS-BW-24(2.13)
2 2 3/4 MS-BW-32(2.75) 5.06 32.5 42.0 1.25 11

Dimensions, cm kg
46 MS-BW-32M(46M)
32 8.53 46.2 58.4 1.85 1.4
50 MS-BW-32M(50M)
38 55 MS-BW-38M(55M) 10.1 66.6 84.6 2.51 3.2
50 2 3/4 in. MS-BW-32(2.75) 12.9 82.6 106.7 3.18 5.0

All dimensions are for reference only and are subject to change.
8 Tools and Accessories

Accessories

Groove Cutter Tube Cutter

The Swagelok groove cutter grooves PFA tubing used with
Swagelok PFA tube fittings.

Ordering Number:
MS-TC-308
For 1/8 in. For 1/4, 3/8,
tubing and 1/2 in. tubing The Swagelok tube cutter cuts stainless steel tubing from
3/16 to 1/2 in. and 4 to 12 mm OD, as well as soft copper and
aluminium tubing from 3/16 to 1 in. and 4 to 25 mm OD.
Tube Size Ordering Number
1/8 MS-GC-2 Features
1/4 MS-GC-4 ■ Flare-out and work hardening of tube end is reduced.
3/8 MS-GC-6 ■ Knobs on handle are spaced in 1/8-turn increments to
1/2 MS-GC-8 provide easy reference when advancing cutter wheel.

Hose Cutters Tube Deburring Tools

Two hose cutters are available.
After use of the tube cutter or tube sawing guide, Swagelok
The Swagelok hose cutter is used to cut push-on hose or soft deburring tools deburr stainless steel, steel, and hard alloy
plastic tubing up to 1 1/4 in. (32 mm) OD. tube ends.

Ordering Number: Features

MS-HC-SC ■ 3/16 to 1 1/2 in. and 4 to 38 mm OD
■ Steel blades for long life
■ Rugged, heavy-duty die-cast housing
The Swagelok thermoplastic hose cutter is used to cut
Swagelok thermoplastic hose and plastic tubing up to 1 1/2 in.
(38 mm) OD.

Ordering Number:
MS-HC-SC-1

Ordering Number: MS-TDT-24

Tube Support System
The Swagelok tube support system organizes and supports tube For deburring 1/4, 3/8, and 9/16 in. ID stainless steel tubing.
and hose runs in sizes from 1/4 to 1 in. (6 to 26 mm) OD.

Features
■ Stainless steel, carbon steel, and polyethylene construction
■ Wall- and channel-mounted options Ordering Number: MS-44CT-27
■ Single- and multiple-line support
Tube Gripper Pad
The Swagelok tube gripper pad allows users to hold tubing
with a firm, secure grip while using the tube cutter or tube
deburring tool.

Ordering Number:
MS-07-25

For ordering information,

see the Tube Supports catalog.
 Tools and Accessories 9

Gap Inspection Gauges Ordering Information

For installation using a wrench
On initial installation, the Swagelok gap inspection gauge
assures the installer or inspector that a fitting has been Fitting Size
sufficiently tightened. in. mm Ordering Number
Male Nut
1/16 — MS-IG-1F0
1/8 2, 3 MS-IG-2F0

For installation using the AHSU or a wrench

Fitting Size
in. mm Ordering Number
Female Nut
1/16 — MS-IG-100
Position the Swagelok gap inspection gauge next to the gap 1/8 2, 3 MS-IG-200
between the nut and body. 3/16 4 MS-IG-300
1/4 6 MS-IG-400
■ If the gauge will not enter the gap, the fitting is
1/4, 3/8, 1/2 6, 12 MS-IG-468
sufficiently tightened.
1/4, 1/2 6, 8, 10, 12 MS-IG-612M
■ If the gauge will enter the gap, additional tightening
5/16 8 MS-IG-500
is required.
3/8 — MS-IG-600
— 10 MS-IG-10M0
1/2 12 MS-IG-810
For Multiple Sizes 5/8 14, 15, 16 MS-IG-1010
3/4 18 MS-IG-1210
7/8 20, 22 MS-IG-1410
1 25 MS-IG-1610

For installation using the MHSU

Fitting Size
in. mm Ordering Number
Female Nut
For Individual Sizes 1 25 MS-MHSU-IG-1610
25 MS-MHSU-IG-25M0
— 28 MS-MHSU-IG-28M0
30 MS-MHSU-IG-30M0
1 1/4 — MS-MHSU-IG-2000
— 32 MS-MHSU-IG-32M0
— 38 MS-MHSU-IG-38M0
1 1/2 — MS-MHSU-IG-2400
— 50 MS-MHSU-IG-50M0
2 — MS-MHSU-IG-3200

Tube Sawing Guide

The tube sawing guide holds tubing to enable fast, accurate
cutting with a hacksaw. The guide helps reduce tubing
preparation time, thereby speeding system assembly.

Features
■ Specially designed clamp holds tubing accurately, without
distorting or scratching the tube surface.
■ Precision guides easily position blade for all cuts.
■ Recess under guide plates provides blade clearance at end
of stroke.
■ Retractable spring-loaded clamp allows tubing to be
inserted easily.
■ Guide accepts tubing sizes from 3/16 to 1 in. and 4 to Ordering Number: MS-TSG-16
25 mm OD.
■ Design permits easy mounting in vise.
10 Tools and Accessories

Liquid Leak Detectors

Snoop® and Real Cool Snoop® liquid leak dectectors detect

gas leaks in hard-to-reach areas.

Snoop

Features
■ Sustained bubble action works even on very small leaks and
vertical surfaces.
■ Bubble size indicates approximate leak rate.
■ Flexible snooper tube extends for hard-to-reach areas.
■ Nontoxic, noncorrosive, nonflammable formula does not
contain chlorine, aliphatic amines, or ammonium compounds.
■ Formula dries clean, without staining.

Ordering Information
Size Ordering Number Snooper Tube
2 oz (59 mL) MS-SNOOP-2OZ 6 in. (15 cm)
8 oz (236 mL) MS-SNOOP-8OZ 12 in. (30 cm)
1 gal (3.8 L) MS-SNOOP-GAL —

Real Cool Snoop

Features
■ Sustained bubble action works at temperatures as low as
–65°F (–54°C), even on very small leaks and vertical
surfaces.
■ Bubble size indicates approximate leak rate.
■ Flexible snooper tube extends for hard-to-reach areas.
■ Noncorrosive, nonflammable formula does not contain
chlorine, aliphatic amines, or ammonium compounds.
■ Formula dries clean, without staining.

Ordering Information
Size Ordering Number Snooper Tube
8 oz (236 mL) MS-RC-SNOOP-8OZ 12 in. (30 cm)
1 gal (3.8 L) MS-RC-SNOOP-GAL —
 Tools and Accessories 11

Thread Lubricants

Silver Goop® VAC Goop®

Oil-based thread lubricant for use on stainless steel and high- Fluorosilicone-based thread lubricant for use on threads, O-rings,
temperature alloys gaskets, glass seals, and metal parts in vacuum systems

Features Features
■ Prevents galling ■ Resists galling

■ Performs in temperatures up to 1500°F (815°C) ■ Has extremely low vapor pressure

■ Contains a non-melting anti-seize agent ■ Minimizes outgassing problems

■ Lowers torque on threaded parts ■ Is chemically non-reactive with a wide range of materials

■ Stays in place between mating surfaces regardless ■ Performs in temperatures up to 300°F (148°C)
of force applied ■ Resists moisture
■ Resists moisture

Ordering Information Temperature Versus Vapor Pressure

10 -2
Size Ordering Number
1 oz (29.5 cm3) tube MS-TL-SGT
10 -3
1 lb (450 g) can MS-TL-SGC

Vapor Pressure, torr

10 -4

10 -5

PURE Goop™
10 -6
Halocarbon-based thread lubricant for use on titanium,
stainless steel, steel, and nickel-based alloys
10 -7
0 10 100 1000
Features Temperature, °C
■ Resists galling
■ Is chemically non-reactive with a wide range of materials
Ordering Information
■ Performs in temperatures up to 350°F (176°C)
■ Is non-corrosive to metals Size Ordering Number

■ Resists moisture 1 oz (29.5 cm3) tube MS-TL-VGT

1 lb (450 g) can MS-TL-VGC
 Warning: Do not use on aluminum or
magnesium threads.

Ordering Information

Size Ordering Number

1 oz (29.5 cm3) tube MS-TL-PGT
1 lb (450 g) can MS-TL-PGC

 Request and read the Material Safety Data Sheets

before using these products.
Sealants

SWAK® Anaerobic Thread Sealant

Features
■ Cures to a bond that resists vibration or shock
■ Lubricates threads, preventing costly thread damage due
to galling and seizing during assembly
■ Allows low breakaway torque for easy-to-break connections,
even after fully cured
■ Is compatible with a wide range of chemicals
■ Applies quickly and easily
■ Clings to threads and will not shred or tear on assembly

PTFE TAPE
Technical Information Thread Sealant
Composition: Resin (containing methacrylic ester) and
PTFE particles Features
Cure time: At room temperature, allow 24 hours minimum ■ Material conforms to Commercial Item Description
before pressurizing➀. A-A-58092
Pressure rating: To pipe or fitting working pressure up to ■ Temperatures up to 450°F (232°C)
10 000 psig (689 bar) (based on proper thread engagement)
Temperature rating: –65 to 350°F (–53 to 176°C)
Applications
Viscosity: Greater than 100 000 centipoise, according to
■ Plastics ■ Chemicals
ASTM D1824
■ Aluminum ■ Corrosives
Storage temperature: 45 to 85°F (7 to 29°C)
■ Stainless steel ■ Hydraulic fluids
Shelf life: Five years at recommended storage temperature
■ Ceramic ■ Refrigerants
■ Synthetic rubber ■ Aromatic fuels
Ordering Information ■ Carbon steel and special alloys

Tube Size, cm3 Ordering Number

 Caution: Tape should be used only on male tapered
6 MS-PTS-6 pipe threads. Do not use on flared, coned, or tube
50 MS-PTS-50 fitting ends.
250 MS-PTS-250
Ordering Information
Male Tapered Ordering
Some fluids and materials are NOT compatible with Pipe Size Tape Size Number
SWAK. While not intended to be a complete list, they
1/4 in.  576 in.
include the following: 1/8, 1/4, and 3/8 in. (6.4 mm  1463 cm) MS-STR-4

■ Plastic pipe or valve components other than PTFE 1/2 in.  288 in.
1/2 in. and up (12.7 mm  732 cm) MS-STR-8
■ Halogens
■ Freon
■ Pure oxygen Safe Product Selection
■ Ozone When selecting a product, the total system design must
be considered to ensure safe, trouble-free performance.
■ Hydrazine
Function, material compatibility, adequate ratings,
■ Nitrogen dioxide proper installation, operation, and maintenance are the
■ High concentrations of strong acids or bases responsibilities of the system designer and user.
■ Food, cosmetic, drug, or water systems for human
consumption Caution: Do not mix or interchange parts with those of
■ Vacuum systems where any hydrocarbon outgassing will other manufacturers.
affect performance
Swagelok, SWAK, Goop, Vac Goop, Pure Goop, Silver Goop,
➀ Cure time and sealing are dependent on many variables, such as storage SNOOP, Real Cool SNOOP—TM Swagelok Company
© 2002 Swagelok Company
conditions, cleanliness of threads, quality of threads, temperature, materials Printed in U.S.A., MI
of construction, proper assembly, specific gravity of system media, and January 2002, R0
system operating pressures. MS-01-169