Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 54 views

    MODEL 1201 Voltage Preamplifier: Low Noise

    Uploaded by

    entico
    The Model 1201 Voltage Preamplifier was designed to provide features for modern laboratory work including high input impedance, gain selection from 10 to 25,000, and low noise. It has superior common mode rejection and can be used for applications like evoked potential measurements and infrared radiometry. The preamplifier offers flexible power options including battery operation with fast or trickle charge rates.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    MODEL 1201 Voltage Preamplifier: Low Noise

    Uploaded by

    entico
    54 views9 pages
    The Model 1201 Voltage Preamplifier was designed to provide features for modern laboratory work including high input impedance, gain selection from 10 to 25,000, and low noise. It has superior common mode rejection and can be used for applications like evoked potential measurements and infrared radiometry. The preamplifier offers flexible power options including battery operation with fast or trickle charge rates.

    Original Title

    1201

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The Model 1201 Voltage Preamplifier was designed to provide features for modern laboratory work including high input impedance, gain selection from 10 to 25,000, and low noise. It has superior common mode rejection and can be used for applications like evoked potential measurements and infrared radiometry. The preamplifier offers flexible power options including battery operation with fast or trickle charge rates.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    54 views9 pages

    MODEL 1201 Voltage Preamplifier: Low Noise

    Uploaded by

    entico
    The Model 1201 Voltage Preamplifier was designed to provide features for modern laboratory work including high input impedance, gain selection from 10 to 25,000, and low noise. It has superior common mode rejection and can be used for applications like evoked potential measurements and infrared radiometry. The preamplifier offers flexible power options including battery operation with fast or trickle charge rates.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 9

    MODEL 1201

    LOW NOISE Phone: (607)539-1108


    VOLTAGE PREAMPLIFIER Email: info@dlinstruments.com
    www.dlinstruments.com

    The Model 1201 Voltage Preamplifier was designed to provide all of the features
    required of a modern laboratory preamplifier. It features high impedance differential
    or single-ended input and superior common mode rejection performance with
    operation either in ac or dc coupled modes. It is an excellent choice for a wide variety
    of applications areas from evoked potential measurements to infrared radiometry
    requiring low noise, high gain and high input impedance. Gain is selectable from 10
    to 25,000 with accuracy of 1% and stability better than 0.03% 0C. Its performance is
    unexcelled.
    Features and capabilities include:
    dc stability 6µ V/0C; CMRR above 125dB;
    CM input to 10Vpk-pk; input leakage current <10pA:
    frequency response to 400 kHz;
    distortion 0.01%: X1 output;
    600Ω outputs;
    Lo-Z output (to 25 mA);
    Battery/line operation.

    The unit may be battery operated with the addition of the Option 10 Battery Pack.
    This allows the unit to run on batteries only, line power only, or recharge while
    operating on line power. Fast charge and trickle charge rates are switch selectable.
    External battery modification option M104 is also available so users may use their
    own external battery to power the unit.

    Model 1201 Noise Current Density Plot


    Model 1201 Noise Voltage Density Plot

    Model 1201 Typical Common Mode Rejection


    Model 1201 Noise Contours
    Model 1201 Block Diagram
    SPECIFICATIONS

    INPUT IMPEDANCE
    dc Coupled Greater than 1 G ( 100MΩ); Typically 5 G ( 5000M).
    ac Coupled 100M ( each input BNC)

    INPUT CURRENT
    Less than 10pA, either input; less than 5 pA difference ( offset) current.

    INPUT FREQUENCY RESPONSE


    <0.008Hz ( ac Coupled) to 400 kHz

    dc STABILITY (vs TEMPERATURE)


    6 V/C max, referred to input; 300 V/C max, referred to output.

    dc STABILITY (vs Time)


    20 V/24 hr r.t.i., non-cumulative, maximum, after ½ hour warm-up.

    MAXIMUM INPUT, COMMON MODE


    10 V, pk-pk; 200Vdc in ac mode.

    MAXIMUM INPUT, DIFFERENTIAL OR SINGLE-ENDED


    ± of 750 mV (gains X10-X100); ±75 mV ( gains of X200-X 10K)
    GAIN
    X10 to X10,000 in a 1-2-5-10 sequence; front panel potentiometer provide
    continuous gain to X25,000

    Gain Accuracy
    Better than 1% when vernier is in cal position.

    Gain stability
    Better 0.03%/OC.

    Distortion
    Typically less than 0.01%

    Frequency Response
    de Coupled dc to 400 kHz (-3 db) with low pass switch in MAX position.
    ac coupled 0.008 Hz to 400 kHz (-3 db) with low pass switch at MAX position.

    High pass filter (low frequency roll off)


    Switch selectable for dc or 0.03 Hz to 3 kHz, in a 1-3-10 sequence @ 6dB/Octave
    roll off.

    Low pass filter (high frequency roll off) Switch selectable for dc or 3 Hz to 300
    kHz and MAX in a 1-3-10 sequence @6 dB/ octave roll off; bandwidth in MAX
    position is 400 kHz min. at full output.

    Noise figure
    Less than 0.4 dB at 1 kHz, with 1 MΩ source impedance. Less than 0.04 dB at
    1kHz , with 1 MΩ source impedance.

    Noise
    Less than 15 nV per Hz-1/2 at 10 Hz. Less than 7nV per Hz-1/2 at 1 kHz. Less than 4
    fA/√Hz below 100 Hz.
    Outputs
    Four outputs (BNC) as follows:
    a) 600Ω outputs (2)
    b) Lo-Z output (to 25mA, 50Ω)
    c) Unity-gain (X1)output

    Maximum output voltage (battery operation)


    a) 600Ω outputs: 12Vpk-pk, min.
    b) Lo-Z output: 10Vpk-pk min., up to 25 mA
    c) Unity-gain (X1) output: 1.3V pk-pk, min., up to 7 mA

    Maximum output voltage (line operation)


    a) 600Ω outputs: 20V pk-pk, min.
    b) Lo-Z output: 18V pk-pk min., up to 25 mA
    c) Unity-gain (X1) output: 2V pk-pk, min., up to 7 mA

    Battery charge time <15hr.

    Battery operation time> 25hr.

    Gated operation
    Preamplifier may be gated with external input (rear panel BNC). Any waveform
    type, including TTL or contact closure, is permissible. Minimum duration (pulse)
    is 20µsec. Maximum gate rate is 20 kHz.

    dc STABILITY (vs Time)


    20 V/24 hr r.t.i., non-cumulative, maximum, after ½ hour warm-up.

    POWER 100VAC 120VAC or 220 VAC to 240 VAC ﴾switch selectable﴿,


    50-60 Hz, 10 watts.

    DIMENSIONS 90×242×385 (3.5 inch high × 9.5 inch wide ×15 inch deep)
    WEIGHT: 3.7kg (8 lb 2oz) less Battery pack
    OPPORATING TEMPREATURE 5 o C to 50 o C.

    1201 OPTION 10 BATTERY PACK

    The retrofittable Nickel Cadmium Battery Pack installs inside the chassis, and is
    charged from 1201 power supply.

    Battery charge time ( fast charge) < 15 hours


    Battery operation time >25 hours
    Weight 1.2kg ( 2 lb. 10 oz)

    Option M104 is for external battery modification. In this operation the unit can
    switch to either powered normally or by external battery.

    For more information please contact:

    DL INSTRUMENTS LLC
    646 76 Road
    Brooktondale, NY 14817
    USA

    Phone: (607)539-1108 www.dlinstruments.com


    Email: info@dlinstruments.com

    You might also like