Notes: Full Height Plating

Column Location and Loading Column Capacities No Reinf Built-Up Section Properties
Column Location C.8/2.5 ø 0.9
Column Section W14x109 Fy 50 ksi Added Plates
Column Height 32 ft E 29000 ksi tpl 0.75 in Ixx_built up 1752 in4
Musteel DL-TOP 189.75 K-ft (unfactored) Col Zy 92.7 in3 hpl 16 in Iyy_built_up 3006.045 in4
Musteel DL-TOP 189.75 k-ft (factored) øMy 347.625 k-ft Agadd 24 in2 ro_XX 5.593363
Psteel 27.1065 kip Sy 61.2 in3 Agtotal 56 in2 ro_YY 7.326621 in4
PDL Total 255 kip ry 3.73 in Ixx 256 in4 (KL/r)o_Y-Y 52.41161 (k=1.0 assumed)
PDL Total-Psteel 227.8935 kip KL/ry 102.9 (k=1.0 assumed) Iyy 0.5625 in4
Live Load 165.82 kip Fe 27.01 ksi ri per plate 0.153093109 in (KL/r)m 76.8284 (k=1.0 assumed) (E) Shear Plates
Pusteel 32.5 kip øFcr 20.7 ksi Fe 48.49022 ksi tpl 0.38 in
Pu_add L3 Conc 1.62 kip Ag = 32 in2 Spacing of Stitch Weld, a 10 in øFcr 29.22663 ksi wpl 14.08 in
PuDL (w/o steel) 275.1 kip øPn 663.5 kips a/ri 65.31972647 Ashearpl 5.28 in2
Pu total (w/o steel) 540.4 kip Pu/øPn 0.86 Ki 0.86 Strengthened Sections Agtotal 37.28 in2
Pu total 572.932 kip Zero Moment Location 7.67 ft from base (Ki*a/ri) 56.17496477 øPn 1636.691 kips
Pu/øPn 0.35 Count Shear Plate
y Ag? =

Column w/ No Strengthening Strengthened Column

Fb initial Fbinitial +
Height Musteel DL Mu/øMy Combined Section OK? Stress (Zy) Fpu Stress Location Combined
(ft) (k-ft) (k-ft) DCR DCR Y-Y
32 189.7455 0.5 1.35 NG - Plate Section 25.58 40.1 BM-Col Joint 0.89
31 181.9 0.5 1.33 NG - Plate Section 24.57 39.1 BM-Col Joint 0.87
30 174.1 0.5 1.31 NG - Plate Section 23.56 38.1 BM-Col Joint 0.85
29 166.3 0.5 1.29 NG - Plate Section 22.55 37.0 BM-Col Joint 0.82
28 158.6 0.5 1.27 NG - Plate Section 21.54 31.2 Plated Section 0.76
27 150.8 0.4 1.25 NG - Plate Section 20.53 30.2 Plated Section 0.74
26 143.0 0.4 1.23 NG - Plate Section 19.52 29.2 Plated Section 0.72
25 135.2 0.4 1.21 NG - Plate Section 18.51 28.2 Plated Section 0.70
24 127.4 0.4 1.19 NG - Plate Section 17.50 27.2 Plated Section 0.68
23 119.6 0.3 1.17 NG - Plate Section 16.49 26.1 Plated Section 0.66
22 111.8 0.3 1.15 NG - Plate Section 15.48 25.1 Plated Section 0.64
21 104.0 0.3 1.13 NG - Plate Section 14.47 24.1 Plated Section 0.62
20 96.2 0.3 1.11 NG - Plate Section 13.46 23.1 Plated Section 0.60
19 88.4 0.3 1.09 NG - Plate Section 12.45 22.1 Plated Section 0.58
18 80.6 0.2 1.07 NG - Plate Section 11.45 21.1 Plated Section 0.56
17 72.8 0.2 1.05 NG - Plate Section 10.44 20.1 Plated Section 0.54
16 65.0 0.2 1.03 NG - Plate Section 9.43 19.1 Plated Section 0.52
15 57.2 0.2 1.01 NG - Plate Section 8.42 18.1 Plated Section 0.50
14 49.4 0.1 0.99 NG - Plate Section 7.41 17.1 Plated Section 0.48
13 41.6 0.1 0.97 NG - Plate Section 6.40 16.0 Plated Section 0.46
12 33.8 0.1 0.95 NG - Plate Section 5.39 15.0 Plated Section 0.44
11 26.0 0.1 0.93 NG - Plate Section 4.38 14.0 Plated Section 0.42
10 18.2 0.1 0.91 NG - Plate Section 3.37 13.0 Plated Section 0.40
9 10.4 0.0 0.89 OK 2.36 12.0 Column 0.89
8 2.6 0.0 0.87 OK 1.35 11.0 Column 0.87
7 -5.2 0.0 0.88 OK 0.34 10.0 Column 0.88
6 -13.0 0.0 0.90 OK -0.67 9.0 Column 0.90
5 -20.8 0.1 0.92 NG - Plate Section -1.68 8.0 Plated Section 0.40
4 -28.6 0.1 0.94 NG - Plate Section -2.69 7.0 Plated Section 0.42
3 -36.4 0.1 0.96 NG - Plate Section -3.70 6.0 Plated Section 0.44
2 -44.2 0.1 0.98 NG - Plate Section -4.71 4.9 Plated Section 0.46
1 -52.0 0.1 1.00 NG - Plate Section -5.72 3.9 Plated Section 0.48
0 -59.8 0.2 1.02 NG - Plate Section -6.73 2.9 Plated Section 0.50