This document summarizes the properties of a flat bar with dimensions of 50mm x 6mm made of steel grade S275, including its yield strength, tensile strength, modulus of elasticity, weight, area, section modulus, and bending and shear capacities. Based on a design bending moment of 0.25 kNm and shear force of 1.0 kN from frame analysis, the bar has sufficient bending and shear resistance.
This document summarizes the properties of a flat bar with dimensions of 50mm x 6mm made of steel grade S275, including its yield strength, tensile strength, modulus of elasticity, weight, area, section modulus, and bending and shear capacities. Based on a design bending moment of 0.25 kNm and shear force of 1.0 kN from frame analysis, the bar has sufficient bending and shear resistance.
This document summarizes the properties of a flat bar with dimensions of 50mm x 6mm made of steel grade S275, including its yield strength, tensile strength, modulus of elasticity, weight, area, section modulus, and bending and shear capacities. Based on a design bending moment of 0.25 kNm and shear force of 1.0 kN from frame analysis, the bar has sufficient bending and shear resistance.
This document summarizes the properties of a flat bar with dimensions of 50mm x 6mm made of steel grade S275, including its yield strength, tensile strength, modulus of elasticity, weight, area, section modulus, and bending and shear capacities. Based on a design bending moment of 0.25 kNm and shear force of 1.0 kN from frame analysis, the bar has sufficient bending and shear resistance.