SECTION 06 16 63 Cementitious Sheathing
SECTION 06 16 63 Cementitious Sheathing
SECTION 06 16 63 Cementitious Sheathing
SECTION 06 16 63
CEMENTITIOUS SHEATHING
PART 1 - GENERAL
1.1.1.1 SUMMARY
A. Section Includes:
1. Cement board sheathing at exterior framed wall construction.
06 16 63 - 1
02-01-16
1.1.1.3 SUBMITTALS
A. Submittal Procedures: Section 01 33 23, SHOP DRAWINGS, PRODUCT DATA, AND
SAMPLES.
B. Manufacturer's Literature and Data:
1. Description of each product.
2. Installation instructions.
3. Warranty.
C. Samples:
1. Cement Board: 200 mm by 200 mm (8 inches by 8 inches), minimum size.
2. Fasteners: One of each type used.
1.1.1.6 WARRANTY
06 16 63 - 2
02-01-16
PART 2 - PRODUCTS
2.1.1.2 SHEATHING
A. Cement Boards: Meeting ANSI A118.9 and ASTM C1325.
1. Thickness: // 13 mm (1/2 inch) // 16 mm (5/8 inch) //.
2. Width: 1219 mm (48 inches), minimum.
2.1.1.3 ACCESSORIES
A. Steel Drill Screws: Corrosion-resistant, self-drilling.
1. ASTM C1002, Type S for fastening to framing less than 0.8 mm
(33 mils) thick.
2. ASTM C954 for fastening to framing 0.8 mm (33 mils) thick and
greater.
B. Joint Reinforcement: Alkali resistant tape as recommended by sheathing
manufacturer.
C. Bonding Material: As recommended by sheathing manufacturer.
D. Air Barrier: As specified in // Section 07 27 26, FLUID-APPLIED MEMBRANE
AIR BARRIER, VAPOR PERMEABLE // Section 07 27 27, FLUID-APPLIED MEMBRANE
AIR BARRIER, VAPOR RETARDING //.
06 16 63 - 3
02-01-16
PART 3 - EXECUTION
3.1.1.1 PREPARATION
A. Examine and verify substrate suitability for product installation.
3.1.1.3 PROTECTION
A. Remove loose or spalling joint finish. Patch areas missing joint finish.
B. Replace broken or damaged boards.
C. Protect boards from moisture using temporary coverings until finishes
are applied.
- - E N D - -
06 16 63 - 4