LCC Pump Series - Wear Resistant,

High Performance Slurry Pumps

02 LCC Pump Series

Solutions for the most Abrasive and

Corrosive Slurry Applications

With High Performance Wear Resistance, the GIW® Minerals LCC Pump
family withstands the most severe slurry applications.

The LCC Pump family is recommended for performance, and customized pumping needs
applications with coarse or fine particles from are available. These options allow optimum
solids-laden waste to agressive slurries of an wear life and sustained efficiency.
abrasive and/or corrosive nature.
For high performance and low maintenance
LCC’s rugged design features, combined with the wet end consists of three components: a
shell, impeller and liner in our proprietary shell or casing, an impeller that screws onto
Gasite material, are recognized worldwide
®
the shaft and a suction plate/liner to permit
for superior abrasion resistance. In addition, easy assembly and disassembly for maintenance
several impeller options to fine tune pump and inspections.

Actual Photo: LCC-R in service at a metals processing plant in Mexico.

 Design Features 03

Choose the GIW® Minerals LCC Pump for Agressive Slurries

Wear Resistant Wet End Parts

■■ Advanced metallurgy provides Wear Resistant alloys
tailored to meet virtually any slurry pumping condition.

Advanced Hydraulic Design

■■ Uses the latest technology tried and tested in our
Hydraulic
Laboratory and in the field.
Also available in rubber
Single Wall Hard Metal shell ■■ Interchangeable with existing metal impellers used in
■■ CAD designed shell and replaceable suction plate/liner earlier LCC-R pumps
■■ Interchangeable sizes with 2 pedestals and 4 mechanical ■■ Designed with proven advanced hydraulics
ends ■■ Best wear resistant rubber on the market
■■ Alloys available for difficult chemical applications ■■ Thickened shrouds and vanes provide maximum wear
resistance in heavier slurries
Rubber Lined
■■ Precision molded rubber parts Cartridge Bearing Assembly
■■ Bolt in liners for easy maintenance ■■ CNC machined cast iron cylindrical housing
■■ CNC machined ductile iron casings ■■ Double row tapered roller bearings handle mechanical
■■ 2-stage operating pressure capacity up to 230 psi (16 and thrust forces
bar) ■■ INPRO® Bearing Isolators are standard
■■ Oil or grease lubrication
Extra Heavy Hard Metal
■■ Heavier metal sections and hydraulics suited to severe Pedestal
duties ■■ CNC machined cast iron
■■ 2-stage operating pressure capacity up to 230 psi (16 ■■ Self-aligning concentric bearing supports
bar) ■■ Integrated impeller gap adjustment screw
■■ Separate suction liner and non-wearing plate ■■ Two pedestal sizes for entire LCC range
(lower replacement cost)
■■ Available in sizes 150-500 (6" x 20") and above

High Pressure Hard Metal Technical Data

■■ Discharge sizes range from 50 mm to 200 mm 2 to 12 in (50 to 300 mm)
Discharge
■■ 3-Stage operating pressure capacity up to 350 psig (24 bar) *High Pressure 2 to 8 in (50 to 200 mm)
■■ Separate suction liner an non-wearing plate 80 to 250 Flow rates up to 15,000 gpm (3,405m3/h)
mm (3"to 10") Total head up to 300 ft (90 m)
Power rating up to 750 Hp (560 kW)
Impellers (metal/rubber) Temperature limit up to 248°F (+120°C)
■■ Twisted three vane design provides high efficiency and Applications
low net positive suction head requirements
■■ Chemical Slurry Service ■■ Fine Primary Mill Grinding
■■ Maximum sphere passage ■■ Mineral Processing ■■ Secondary Grinding
■■ Available in various materials including GIW Minerals
■■ Sand and Gravel ■■ In-plant Processes
■■ Tailings ■■ Coal Preparation
alloys, polyurethane and extreme duty versions
04 Pump Selection

The LCC Pump Series offers a wide selection range

Flowrate (m3/hr)
30 40 50 60 80 100 200 300 300 700 1000 2000 4000

200
600
500 150

400 1650 RPM

3710 RPM 1360 1250 R 100
2700 RPM RPM PM 11
2090 RPM 60 RPM
300
80

60
200
2400 RPM 1070
RPM 880 810
50
1740 RPM RPM 750
RPM 135
5 RP RPM 40
M

Head (m)
Head (ft)

100 30

")

")
)

)
)

6"

0"

4"
2"

80

26

28
x1

x2

x2
x1

20

"x

"x
(4"

(6"

(8"
3"

60

(10

(12
")

0(

15
x9

00

00

10

60

10
30

50
-4

-5

-6
2"

-6

-7
0-
0(

00

50

00

40
50

00
C8

C1

C1

C2
23

C2

C3
10
LC
0-

LC

LC

LC

LC

LC
30 8
C5
LC

6
20
Typical RPM Limit 5
for Rubber Wet End
4

0 0
100 200 300 500 700 1000 2000 4000 6000 10000 20000
Flowrate (gpm)

LCC Seal Arrangements

1   Mechanical Seal
■■ Use when gland water cannot be added to process
■■ Available for standard and chemical duty
3
■■ Dry design, optional back flush, and double

2   Stuffing Box
■■ Standard KE design with lantern ring and packing
■■ Throttle bushing design for special applications

3  *Expeller Seal
■■ Use when process dilution must be minimized
1
■■ Expeller rotor and chamber balance pressures at gland
packing for zero leakage
■■ Exclusive internal diverter provides additional efficiency
■■ Stuffing box includes port for maintenance flushing
2

*Note: Not applicable on HP Pumps

 Pump Dimensions 05

LCC Metal Dimensions

w 3*

DN2 w 1* r b2

h2
d(k6 tolerance)
v
DN1 u

b1
l w 2*
x
h1
t
s1 ISO R773
g
s2 n
m2 m1 m1
c
a a1 e

f
Pump and Shaft Size Pump *May exceed h1 Dimensions in inches (US) Shaft in mm

DN1 DN2 a a1 b1 b2 f h1 h2 r w1 (ref.) w2 (ref.) w3 (ref.) q (ref.)

50-230 1 3 2 4.53 4.61 1)

0.87 0.79 29.84 1)
14.57 9.06 5.71 6.69 6.89 8.71 1.56
(2"x9") 2 3 2 4.53 4.61 1)
0.87 0.79 32.09 1)
14.57 9.06 5.71 6.69 6.89 8.71 1.56
80-300 1 4 3 4.72 4.961) 0.87 0.87 30.161) 14.57 10.63 7.87 8.86 9.45 11.62 1.88
(3"x12") 2 4 3 4.72 4.96 1)
0.87 0.87 32.40 1)
14.57 10.63 7.87 8.86 9.45 11.62 1.88
100-400 1 6 4 5.32 5.43 1)
0.94 0.94 30.63 1)
14.57 12.80 9.84 11.22 11.81 14.34 2.19
(4"x16") 2 6 4 5.32 5.431) 0.94 0.94 32.871) 14.57 12.80 9.84 11.22 11.81 14.34 2.19
3 6 4 5.32 7.91 3)
0.94 0.94 43.19 3)
21.26 12.80 9.84 11.22 11.81 14.34 2.19
150-500 3 8 6 6.89 7.442) 1.26 0.94 42.722) 21.26 16.14 12.21 14.17 14.76 17.71 2.63
(6"x20") 4 8 6 6.89 7.44 2) 1.26 1.06 48.23 2)
21.26 16.14 12.21 14.17 14.76 17.71 2.63
200-610 3 10 8 8.27 8.62 2) 1.26 1.06 43.90 2)
21.26 20.08 14.17 16.54 17.32 20.92 3.38
(8"x24") 4 10 8 8.27 8.62 2) 1.26 1.26 49.41 2)
21.26 20.08 14.17 16.54 17.32 20.92 3.38
5 10 8 8.27 8.62 2) 1.26 1.26 52.56 2)
21.26 20.08 14.17 16.54 17.32 20.92 3.38
250-660 3 12 10 9.65 9.802) 1.26 1.26 45.082) 21.26 22.05 15.95 18.90 20.08 23.95 3.94
(10"x26") 4 12 10 9.65 9.80 2) 1.26 1.26 50.59 2)
21.26 22.05 15.95 18.90 20.08 23.95 3.94
5 12 10 9.65 9.80 2) 1.26 1.26 53.74 2)
21.26 22.05 15.95 18.90 20.08 23.95 3.94
300-710 3 14 12 11.42 11.382) 1.46 1.26 46.652) 21.26 22.05 18.11 22.05 24.02 27.61 3.94
(12"x28") 4 14 12 11.42 11.38 2)
1.46 1.26 52.17 2)
21.26 22.05 18.11 22.05 24.02 27.61 3.94
5 14 12 11.42 11.382) 1.46 1.26 55.322) 21.26 22.05 18.11 22.05 24.02 27.61 3.94
1) When assembled with expeller + 2.76 in 2) When assembled with expeller + 3.94 in 3) No expeller

Shaft Size Pedestal and Shaft End Dimensions in inches (US) Shaft in mm

c e g m1 m2 n s1 s2 d (mm) I t (mm) u (mm) v (mm) x (mm)

1 20.87 19.53 0.79 7.78 1.85 18.90 1.00 1.56 35 4.09 30.3 10 90 8
2 20.87 19.53 0.79 7.78 1.85 18.90 1.00 1.56 50 5.98 44.5 14 100 9
3 31.50 27.40 1.00 11.32 2.60 28.54 1.38 2.00 70 6.77 62.5 20 140 12
4 31.50 27.40 1.00 11.32 2.60 28.54 1.38 2.00 100 10.04 90.0 28 200 16
5 31.50 27.40 1.00 11.32 2.60 28.54 1.38 2.00 125 10.43 113.9 32 200 18
06 LCC-R

LCC Rubber Dimensions

w 3*
DN2
w 1* r b2

h2 d(k6 tolerance)
v u
DN1

l
w 2* x
h1
t
s1 ISO R773
g
b1
s2 n
m2 m1 m1
c
a a1 e

Pump and Shaft Size Pump *May exceed h1 Dimensions in inches (US) Shaft in mm

DN1 DN2 a a1 b1 b2 f h1 h2 r w1 (ref.) w2 (ref.) w3 (ref.)

50-230 1 3 2 4.53 4.61 1)

0.87 0.79 29.84 1)
14.57 9.06 5.71 8.82 9.17 9.49
(2"x9") 2 3 2 4.53 4.611) 0.87 0.79 32.091) 14.57 9.06 5.71 8.82 9.17 9.49
80-300 1 4 3 4.72 4.96 1)
0.87 0.87 30.16 1)
14.57 10.63 7.87 11.38 11.81 12.28
(3"x12") 2 4 3 4.72 4.96 1)
0.87 0.87 32.40 1)
14.57 10.63 7.87 11.38 11.81 12.28
100-400 1 6 4 5.32 5.431) 0.94 0.94 30.631) 14.57 12.80 9.84 14.29 14.84 15.43
(4"x16") 2 6 4 5.32 5.43 1)
0.94 0.94 32.87 1)
14.57 12.80 9.84 14.29 14.84 15.43
150-500 3 8 6 6.89 7.44 2) 1.26 1.06 42.72 2)
21.26 16.14 12.21 17.95 18.70 19.41
(6"x20") 4 8 6 6.89 7.442) 1.26 1.06 48.232) 21.26 16.14 12.21 17.95 18.70 19.41
200-610 3 10 8 8.27 8.62 2) 1.26 1.26 43.90 2)
21.26 20.08 14.17 21.14 21.97 22.80
(8"x24") 4 10 8 8.27 8.62 2) 1.26 1.26 49.41 2)
21.26 20.08 14.17 21.14 21.97 22.80
5 10 8 8.27 8.62 2) 1.26 1.26 52.56 2)
21.26 20.08 14.17 21.14 21.97 22.80
250-660 3 12 10 9.65 9.80 2) 1.26 1.26 45.08 2)
21.26 22.05 15.95 23.82 25.00 26.18
(10"x26") 4 12 10 9.65 9.802) 1.26 1.26 50.592) 21.26 22.05 15.95 23.82 25.00 26.18
5 12 10 9.65 9.80 2) 1.26 1.26 53.74 2)
21.26 22.05 15.95 23.82 25.00 26.18
300-710 3 14 12 11.42 11.38 2)
1.46 1.26 46.65 2)
21.26 25.20 18.11 27.24 28.98 30.75
(12"x28") 4 14 12 11.42 11.382) 1.46 1.26 52.172) 21.26 25.20 18.11 27.24 28.98 30.75
5 14 12 11.42 11.38 2)
1.46 1.26 55.32 2)
21.26 25.20 18.11 27.24 28.98 30.75
1) When assembled with expeller + 2.76 in 2) When assembled with expeller + 3.94 in

Shaft Size Pedestal and Shaft End Dimensions in inches (US) Shaft in mm

c e g m1 m2 n s1 s2 d (mm) I t (mm) u (mm) v (mm) x (mm)

1 20.87 19.53 0.79 7.78 1.85 18.90 1.00 1.56 35 4.09 30.3 10 90 8
2 20.87 19.53 0.79 7.78 1.85 18.90 1.00 1.56 50 5.98 44.5 14 100 9
3 31.50 27.40 1.00 11.32 2.60 28.54 1.38 2.00 70 6.77 62.5 20 140 12
4 31.50 27.40 1.00 11.32 2.60 28.54 1.38 2.00 100 10.04 90.0 28 200 16
5 31.50 27.40 1.00 11.32 2.60 28.54 1.38 2.00 125 10.43 113.9 32 200 18
 LCC-H 07

LCC Extra Heavy & High Pressure Dimensions

w 3*
DN2 b2
w 1* r

h2
d(k6 tolerance)
v
DN1 u

l
w 2*
h1
x
s1 t
g ISO R773
s2
n
m2 m1 m1
a a1 e c

Pump and Shaft Size Pump *May exceed h1 Dimensions in inches (US) Shaft in mm

DN1 DN2 a a1 b2 f h1 h2 r w1 (ref.) w2 (ref.) w3 (ref.) q (ref.)

150-500 3 8 6 6.89 7.44 2)

1.06 42.72 2)
21.26 16.14 12.21 16.34 16.73 17.71 2.63
(6"x20") 4 8 6 6.89 7.442) 1.06 48.232) 21.26 16.14 12.21 16.34 16.73 17.71 2.63
200-610 3 10 8 8.27 8.62 2) 1.26 43.90 2)
21.26 20.08 14.17 18.90 19.49 20.92 3.94
(8"x24") 4 10 8 8.27 8.62 2) 1.26 49.41 2)
21.26 20.08 14.17 18.90 19.49 20.92 3.94
5 10 8 8.27 8.622) 1.26 52.562) 21.26 20.08 14.17 18.90 19.49 20.92 3.94
250-660 3 12 10 9.65 9.80 2) 1.26 45.08 2)
21.26 22.05 15.95 21.65 22.44 23.95 3.94
(10"x26") 4 12 10 9.65 9.802) 1.26 50.592) 21.26 22.05 15.95 21.65 22.44 23.95 3.94
5 12 10 9.65 9.802) 1.26 53.742) 21.26 22.05 15.95 21.65 22.44 23.95 3.94
300-710 3 14 12 11.42 11.38 2) 1.26 46.65 2)
21.26 25.20 18.11 25.59 26.97 27.61 3.94
(12"x28") 4 14 12 11.42 11.382) 1.26 52.172) 21.26 25.20 18.11 25.59 26.97 27.61 3.94
5 14 12 11.42 11.38 2) 1.26 55.32 2)
21.26 25.20 18.11 25.59 26.97 27.61 3.94
1) When assembled with expeller + 2.76 in 2) When assembled with expeller + 3.94 in

Slysel Reference - High Pressure

Pump # Shaft Size *May exceed h1 Dimensions in inches (US) Shaft in mm

DN1 DN2 a a1 b2 f h1 h2 r w1 (ref.) w2 (ref.) w3 (ref.) q (ref.)

1087E - 50-230 (2" x 9") 2 3 2 4.65 4.61 0.79 32.13 14.57 9.06 5.71 7.86 8.44 8.66 1.56

1088E - 80-300 (3" x 12") 2 4 3 4.37 1.85 0.87 32.44 8.56 10.63 7.87 8.88 10.13 11.22 1.57

1093E - 100-400 (4" x 16") 3 6 4 6.02 7.81 0.94 48.38 21.26 12.80 9.84 10.13 13.17 14.60 2.19

1091E - 150-500 (6" x 20") 4 8 6 6.99 9.76 1.50 57.73 21.26 20.20 12.24 17.60 17.60 17.75 4.69

1092E - 200-610 (8" x 24") 4 10 8 8.29 10.39 1.63 59.54 21.26 24.05 14.17 20.11 19.95 22.15 4.69

Shaft Size Pedestal and Shaft End Dimensions in inches (US) Shaft in mm

c e g m1 m2 n s1 s2 d (mm) I t (mm) u (mm) v (mm) x (mm)

2 20.87 19.53 0.79 7.78 1.85 18.90 1.00 1.56 50 5.98 44.5 14 100 9
3 31.50 27.40 1.00 11.32 2.60 28.54 1.38 2.00 70 6.77 62.5 20 140 12
4 31.50 27.40 1.00 11.32 2.60 28.54 1.38 2.00 100 10.04 90.0 28 200 16
5 31.50 27.40 1.00 11.32 2.60 28.54 1.38 2.00 125 10.43 113.9 32 200 18
 2368.024-US / 11.15 / © GIW Industries, Inc. 2015 · Subject to technical modifications.

GIW Industries, Inc. (A KSB Company)

5000 Wrightsboro Road, Grovetown
Georgia 30813-2842, USA
www.giwindustries.com