Product Data Sheet: SPD VT2

VT2 M TT 320 FM (955 325)

■ Prewired complete unit consisting of a base part and plug-in protection modules
■ High discharge capacity due to heavy-duty zinc oxide varistors / spark gaps
■ High reliability due to "Thermo Dynamic Control" SPD monitoring device

Figure without obligation

Basic circuit diagram VT2 M TT 320 FM Dimension drawing VT2 M TT 320 FM

Modular surge arrester for use in TT and TN-S systems (3+1 configuration); with floating remote signalling contact.
Type VT2 M TT 320 FM  
Part No. 955 325  
SPD according to EN 61643-11 / IEC 61643-11 type 2 / class II   
Energy coordination with terminal equipment (≤ 10 m) type 2 + type 3   
Nominal voltage (a.c.) (UN) 230 / 400 V (50 / 60 Hz)   
Max. continuous operating voltage (a.c.) [L-N] (UC) 320 V (50 / 60 Hz)   
Max. continuous operating voltage (a.c.) [N-PE] (UC) 255 V (50 / 60 Hz)   
Nominal discharge current (8/20 µs) (In) 20 kA  
Max. discharge current (8/20 µs) (Imax) 40 kA  
Lightning impulse current (10/350 µs) [N-PE] (Iimp) 12 kA  
Voltage protection level [L-N]/[N-PE] (UP) ≤ 1.5 / ≤ 1.5 kV  
Voltage protection level [L-N] / [N-PE] at 5 kA (UP) ≤ 1.2 / ≤ 1.5 kV  
Follow current extinguishing capability [N-PE] (Ifi) 100 Arms  
Response time [L-N] (tA) ≤ 25 ns  
Response time [N-PE] (tA) ≤ 100 ns  
Max. mains-side overcurrent protection 125 A gG  
Short-circuit withstand capability for max. mains-side overcurrent
protection (ISCCR) 25 kArms  
Temporary overvoltage (TOV) [L-N] (UT) – Characteristic 335 V / 5 sec. – withstand   
Temporary overvoltage (TOV) [L-N] (UT) – Characteristic 440 V / 120 min. – safe failure   
Temporary overvoltage (TOV) [N-PE] (UT) – Characteristic 1200 V / 200 ms – withstand   
Operating temperature range (TU) -40 °C ... +80 °C   
Operating state / fault indication green / red   
Number of ports 1   
2
Cross-sectional area (min.) 1.5 mm solid / flexible   
2 2
Cross-sectional area (max.) 35 mm stranded / 25 mm flexible   
For mounting on 35 mm DIN rails acc. to EN 60715   
Enclosure material thermoplastic, gray, UL 94 V-0   
Place of installation indoor installation   
Degree of protection IP 20   
Capacity 4 module(s), DIN 43880  
Approvals KEMA, UL   
Type of remote signalling contact changeover contact   
Switching capacity (a.c.) 250 V / 0.5 A   
Switching capacity (d.c.) 250 V / 0.1 A; 125 V / 0.2 A; 75 V / 0.5 A   
2
Cross-sectional area for remote signalling terminals max. 1.5 mm solid / flexible   
Extended technical data: ---------------------------------   
Voltage protection level [L-PE] (UP) 1.75 kV  
Weight 424 g  
Customs tariff number (Comb. Nomenclature EU) 85363030  
GTIN 4013364369122  
PU 1 pc(s)  

We reserve the right to introduce changes in performance, configuration and technology, dimensions, weights and materials in the course of technical progress. The figures are shown without obligation.

DEHN INDIA Pvt. Ltd. Plot No, 213, Sector - 7, IMT Manesar, Gurgaon (Haryana) 122050 · Tel. +91 124 4007680 · www.dehn.in
3, te
s ted
: Tested +: New (: Discontinued Model Last update: 05.2019