Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Surge Arrester-Class I+ Class II MG25/275-S/PN50: Power Supply System

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

R

POWER SUPPLY SYSTEM

Surge Arrester- Class I+ class II

MG25/275-S/PN50
R

Basic circuit diagram


The MG25/275-S/PN50 is class I & class II combined (Type 1+2 or Class B+C) and 2 poles pre-wired SPD designed for
low-voltage power system lightning current & surge protection, especially for location of high risk exposure or LPZ 0-2
R

building entrances ( IEC 62305-4) to against the damage from direct or close lightning strikes.
With built in PROSURGE Trigger Spark-Gap (TSG) technology, MG25 ensures remarkable lightning current discharge
capacity up to 25 kA 10/350(L-N),50kA10/350(N-PE) and follow current limiting &extinguishing.

 TUV certified class I+ class II SPD per IEC/EN 61643-11 standard.


 Stable and Reliable Follow current extinguishing capacity without derating
 Encapsulated spark gap to guarantee reliability in rugged environment
 Prewired 1+1” circuit for use in 1-phase 220~230Vac TT and TN-S systems
 Lightning current capacity Iimp 25 kA10/350 (L-N) and 50kA10/350(N-PE).
 Low voltage protection level due to TSG tech.
 Ideal protection for environments with frequent switching operations or lightning strikes.
 Long service life.
 Compact size,36mm width
 Degradation failure indication and optional remote signal contact.
 35mm DIN-rail mounting

Dimension(mm)

www.prosurge .com Release by Prosurge Electronics. Co., Ltd. 2020 version


R
POWER SUPPLY SYSTEM
Technical data

Part No.
In accordance with
Category IEC/EU/VDE
Nominal Voltage Un
MG25/275-(S)/PN50
IEC61643-11:2011/EN61643-11:2012/A11:2018
I+ II /1+2/ B+C
220/385~230/400 Vac (50/60Hz)
R
Max. continuous operating voltage L – N (AC) 255Vac
Uc N–PE (AC) 255Vac
Nominal discharge current(8/20) L–N 25kA
In N-PE 50kA
Max. discharge current(8/20) L-N 100kA
Imax N-PE 100kA
Lightning impulse current (10/350) L-N 25kA
Iimp N-PE 50kA
Voltage protection level L-N <1.3kV
Up N–PE(1.2/50) <1.3kV
Response time L-N ≤25 ns
tA N-PE ≤100 ns
R

Temporary overvoltage TOV L-N 440Vac/120min, withstand mode


UT N-PE 1200 Vac /200 ms, withstand mode
Short-circuit current rating (Isccr)& L-N 25kArms
Follow current interrupt rating (Ifi) N-PE Ifi =100Arms @ 255Vac
Backup fuse(only required if not already provided in ≤315A gL/gG
mains)
Operating temperature range - 40ºC ~ + 80ºC
2 2
Cross-section of connection wire Single-strand 35mm ; multi-strand 25mm
Mounting 35mm DIN-rail in accordance with EN 50022/DIN46277-3
Enclosure material thermoplastic; extinguishing degree UL94 V-0
Degree of protection IP20
Installation width 2 modules, DIN 43880
Thermal disconnector Internal No color – normal ; red - failure
Remote alarm contact Optional
Approvals, Certifications TUV , CE
Additional data for Remote Alarm Contacts
Remote
Remote alarm
alarm contact
contact type
type Open (failure)
floating /Close
changeover
(normal)
contact
Switching capability UN/IN
Switching capability Un/In AC: 250V/0.5A
AC: 250V/0.5A DC: 250V/0.1A; 125V/0.2A; 75V/0.5A
DC: 250V/0.1A; 125V/0.2A; 75V/0.5A
2
Cross-section
Max. of connection
Size of connecting wirewire Max.2 1.5mm
Max. 1.5mm (or # 16AWG)

www.prosurge .com Release by Prosurge Electronics. Co., Ltd. 2020 version

You might also like