Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 54 views

    Alloy 4047 Weld Data Sheet: Typical Applications

    Uploaded by

    MarcoAntonio
    Alloy 4047 is an aluminum welding filler wire composed of 11-13% silicon. It has a melting range of 1070-1080°F and conductivity of 41% IACS. Alloy 4047 produces bright, smut-free welds and significantly reduces hot cracking compared to other alloys. It can be used for applications requiring sustained elevated temperatures. Typical mechanical properties of gas tungsten arc welds using Alloy 4047 are also provided.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Alloy 4047 Weld Data Sheet: Typical Applications

    Uploaded by

    MarcoAntonio
    54 views2 pages
    Alloy 4047 is an aluminum welding filler wire composed of 11-13% silicon. It has a melting range of 1070-1080°F and conductivity of 41% IACS. Alloy 4047 produces bright, smut-free welds and significantly reduces hot cracking compared to other alloys. It can be used for applications requiring sustained elevated temperatures. Typical mechanical properties of gas tungsten arc welds using Alloy 4047 are also provided.

    Original Title

    (02-03-2015) - SDS-Alcotec-Alloy-4047

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Alloy 4047 is an aluminum welding filler wire composed of 11-13% silicon. It has a melting range of 1070-1080°F and conductivity of 41% IACS. Alloy 4047 produces bright, smut-free welds and significantly reduces hot cracking compared to other alloys. It can be used for applications requiring sustained elevated temperatures. Typical mechanical properties of gas tungsten arc welds using Alloy 4047 are also provided.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    54 views2 pages

    Alloy 4047 Weld Data Sheet: Typical Applications

    Uploaded by

    MarcoAntonio
    Alloy 4047 is an aluminum welding filler wire composed of 11-13% silicon. It has a melting range of 1070-1080°F and conductivity of 41% IACS. Alloy 4047 produces bright, smut-free welds and significantly reduces hot cracking compared to other alloys. It can be used for applications requiring sustained elevated temperatures. Typical mechanical properties of gas tungsten arc welds using Alloy 4047 are also provided.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    ALLOY 4047 WELD DATA SHEET

    TYPICAL APPLICATIONS
    Welding Filler Wire

    GENERAL INFORMATION
    Trade Designations: Almigweld and Altigweld
    Non-Heat treatable
    Similar to AlSi12 (Germany)
    ISO designation AlSi12
    Principle alloying elements: Silicon
    Applicable specifications: ANSI/AWS A5.10(ER & R), AMS 4185

    WELDING APPROVALS
    Canadian Welding Bureau

    TYPICAL PROPERTIES
    Melting range: 1070 - 1080oF Resistance to corrosion: B (Gen) A (SCC)
    Conductivity: 41 % IACS (-O) Anodize Color: Gray-Black
    Density: .096 lbs./cu. in.

    CHEMISTRY
    OTHERS
    SILICON IRON COPPER MANGANESE MAGNESIUM CHROMIUM ZINC TITANIUM BERYLLIUM EACH TOTAL ALUM
    11.0-13.0 0.8 0 .30 0.15 0.10 ----- 0.20 ---- 0.0003 0.05 0.15 REM
    NOTE: SINGLE VALUES ARE MAXIMUM UNLESS OTHERWISE NOTED.

    TYPICAL MECHANICAL PROPERTIES OF GTAW GROOVE JOINT WELDS*


    BASE ALLOY PROPERTIES AS WELDED POSTWELD HEAT-TREATED & AGED1
    BASE ALLOY UTS (KSI) UYS (KSI) ELONG (%) UTS (KSI) UYS (KSI) ELONG (%) UTS (KSI) UYS (KSI) ELONG (%)
    2014-T6 70 60 13 34 28 4 50 ---- 2
    2
    6061-T4 35 21 22 27 18 8 35 ---- 82
    6061-T6 45 40 12 27 18 8 44 40 5
    6063-T4 25 22 22 20 10 12 30 ---- 13

    (1) REQUIRES SUFFICIENT DILUTION OF BASE METAL INTO WELD POOL FOR HEAT TREAT AND/OR AGE RESPONSE. REFER TO
    ALCOTECHNIC CONCERNING ALLOY 4643 FOR ADDITIONAL INFORMATION.
    (2) POSTWELD AGED ONLY.
    * ALLOYS 4043 AND 4047 ARE CONSIDERED THE SAME FOR PROPERTIES PER AWS D1.2 STRUCTURAL WELDING CODE.

    AlcoTec Wire Corporation


    2750 Aero Park Dr., Traverse City, MI 49686-9263 U.S.A. 1-800-228-0750 FAX: 231-941-9154
    E-mail: alcotec@traverse.com Website: www.alcotec.com
    ALLOY CHARACTERISTICS
    ALLOY 4047 WAS ORIGINALLY DEVELOPED AS A BRAZING ALLOY (BAlSi-4) OR (718)TO TAKE ADVANTAGE OF ITS
    LOW MELTING POINT AND NARROW FREEZING RANGE. IN ADDITION, IT HAS A HIGHER SILICON CONTENT THAN
    4043, WHICH PROVIDES FOR INCREASED FLUIDITY AND REDUCED SHRINKAGE. THE ALLOY PRODUCES BRIGHT
    AND ALMOST SMUT FREE WELDS. HOT CRACKING IS SIGNIFICANTLY REDUCED WHEN 4047 IS USED AS A FILLER
    ALLOY.
    THE ALLOY MAY BE USED IN APPLICATIONS OF SUSTAINED ELEVATED TEMPERATURES.

    Typical Semiautomatic GMA Procedures for Fillet and Lap Welding Aluminum
    3 1
    DC(EP) Base DC(EP) Wire Argon Approximate
    2
    Wire Dia Range Thickness Suggested Feed Gas Flow Consumption
    Inches Amps Volts Inches Amps Volts IPM CFH Lbs/100Ft
    .030 100-130 18-22 .094 100 22 500 30 0.75
    125-150 20-24 .125 120 22 600 30 1

    .035 85-120 20-23 .094 110 22 480 30 0.75


    125-150 20-24 .125 130 22 566 30 1
    170-190 21-26 .250 170 23 740 35 4

    .047 125-150 20-24 .125 150 23 360 30 1


    180-210 22026 .187 180 23 410 30 2.3
    170-240 24-28 .250 190 24 470 40 4

    .062 190-260 21-26 .250 200 23 265 50 4


    240-300 22-27 .375 230 24 300 50 9
    260-310 22-27 .500 260 26 340 60 16
    280-320 24-28 .750 280 27 385 65 36
    290-340 26-30 1.000 300 28 420 70 64

    .094 280-360 26-30 .750 320 29 170 60 36


    300-400 26-32 1.000 330 30 180 80 64

    1. Metal thickness of ¾” or greater for fillet welds sometimes employs a double vee bevel of 50 deg or
    greater included vee with 3/32 to 1/8 inch land thickness on the abutting member.
    2. Electrode consumption given for weld on one side only and based on leg length equal to plate
    thickness.
    3. For 5XXX series electrodes use a welding current in the high side of the range given and an arc
    voltage in the lower portion of the range. 1XXX, 2XXX, and 4XXX series electrodes would use the
    lower currents and higher arc voltages.

    THIS INFORMATION IS BASED ON DATA DEVELOPED UNDER LABORATORY CONDITIONS AND IS DESIGNED AS A
    GUIDELINE ONLY. INDIVIDUAL CONDITIONS, WELDING EQUIPMENT AND ENVIRONMENT CAN AFFECT
    SUGGESTED SETTINGS.

    AlcoTec Wire Corporation


    2750 Aero Park Dr., Traverse City, MI 49686-9263 U.S.A. 1-800-228-0750 FAX: 231-941-9154
    E-mail: alcotec@traverse.com Website: www.alcotec.com

    You might also like