MME/MOE Intelligent Electric Actuators

About Ontrac

Ontrac Actuator Keeping Your Production Line On Track

01
MME/MOE Intelligent Electric Actuators
Specifications

●Voltage supply˖ 3-phase AC, 380/460±10%, 50/60Hz±5%;

1-phase AC, 220±10%, 50/60Hz±5%;

● Duty mode˖ On-off (MOE series,) a complete stroke, S2 - 15 min;

Modulating (MME series), separate strokes, S4 - 25%, Number of starts ≤1200/h

● Motor control˖ Variable frequency control technology

●Voltage input˖ 24V. DC (18-33V), max 500mA;

●Voltage output˖ 24V. DC (18-33V), max 40mA; short circuit protection.

● Input Signal˖ (1)Analogue input (optional): 4...20 mA; galvanically isolated; 250Ω inherent
resistance; rising characteristic
(2)Digital input (BE1...B4): 4 optocoupler, potential free; freely configurable

● Output Signal˖ (1)Analogue output (optional): 0/4...20 mA for position signal; load max. 500Ω;
galvanical isolated; short circuit proof; rising or falling characteristic;
(2)Digital output: Standard 4 (BA1...4) optional 7 (BA 5...7) or 8 (BA5...8) potential
free, gold coated relay contacts,galvanical isolated, freely configurable; max.
50V,overload proof; Imax. < 150 mA; Imin. > 1 mA;

● Strokes range˖ Minimum 1 circle for Multi-turn.

● Torque tripping˖ 40%...100% adjustbale,step 5%

● Output Speed˖ 40%...100% adjustbale,step5%

● Accuracy˖ (1)Multi-turn˄stroke≥1 circle˅≤±0.5%

ǂǂǂǂǂǂǂ (2)Part-turn ≤±0.5%
ǂǂǂǂǂǂǂ (3)Linear˄stroke≥25mm˅ ≤±0.5%
● Dead zone˖ 1%˄0.5...10% adjustable˅

● Enclosure protectionIP67 (IP68 optional)

● Explosive protection ExdIIBT4

● Ambient conditions˖ (1)Temperature: On-off duty, MOE series, – 25 °C to +70 °C



Modulating duty,MME series, –25 °C to +60 °C

Separate type, MME series, –40°C to +85 °C
(2)Humidity˖≤95%
(3)Air media˖without corrosive, flammable or explosive gas

●Anticondensation˖ Anti condensation heater inside

● CE standard˖ (1) EN 61000-6-4: 2007, EN 61000-6-2: 2005



(2) EN 61000-3-2:2006 +A1: 2009+A2: 2009, EN 61000-3-3: 2008

(3) EN 60204-1:2006+A1:2009

● Fatigue strength˖0.75g within 5...200Hz; extended strength proof with 5...150Hz,2g sinusoidal

Ontrac Actuator Keeping Your Production Line On Track

02
 MME/MOE Intelligent Electric Actuators
Main Components

Motor in insulation class F.

ABB advanced frequency converter The gear unit provides high Measuring and monitoring of
and electronics technologies. efficiency, maintenance free both current and temperature
operation. provide full protection.

Introduction of efficient Man-machine Motor and control cables are

interface simplifies commissioning with connected by using screw-
user guidance. type terminals or PCB plug-in
terminals to ensure reliable
electrical contact.

Magnetic angle sensors for contact-less

position detection, are operated by
means of the signaling gear to detect
the current valve position and torque.

A centrifugal lock prevents the hand

wheel from engaging before the motor
has come to a standstill.

Ontrac Actuator Keeping Your Production Line On Track

03
MME/MOE Intelligent Electric Actuators
Panel and Menu

Mode selector
Remote control indicator
Password protection
Local open
Upward
Failure alarm
LED light

25) 䎶䎷䎲䎳
9:56
 Local stop Numerical area
Menu setting Text area
35*+
8+3 䎰䎲䎧䎨
Infrared port

Infrared adapter pins

Menu indicator
Local close
Downward Local control indicator

Menu Group

■ SETUP ■ SERVICE ■ SYSTEM INFO.

■ travel dependent ■ 4mA input calibration ■ travel time
■ torque dependent ■ 20mA input calibration ■ maximun torque
■ valve control speed ■ 4mA output calibration ■ software version
■ switch off mode ■ 20mA output calibration ■ hardware version
■ switch off position ■ delete current range ■ actuator model
■ end position ■ dead-zone adjustment ■ phases of AC power
■ limit value ■ output polarity setting ■ extended func. board
■ PARAMETER ■ analog signal range ■ temperature
■ inchmode ■ ESD target position ■ valve position
■ holdmode ■ reset ■ PASSWORD PROTECTION
■ remote digital control ■ SELF-DIAGNOSIS ■ INPUT PORTS SETTING
■ increasing effective torque ■ error info. ■ OUTPUT PORTS SETTING
■ alarm info.

Ontrac Actuator Keeping Your Production Line On Track

04
 MME/MOE Intelligent Electric Actuators
Functional Block
Valve

PE
Power Frequency 3P
U Worm Gear
V converter converter AC Motor
W
DC Frequency
24V/30mA.DC converter converter
unit
Input 24V.DC

Electronics Temp. of Temp. of Handwheel Position

Digital display SCR motor status signal
unit
Menu
Com.
CPU ports
Open Stop Close

Local
Position

Position
On/Off
Position
On/Off

Analog Analog Field

Stop Input x4 Output x4 bus
Remote

Note: the blocks in light blue are optional, and order no. are 385, 386 and 387 respectively.
Menu
BE1 ~ BE4 digital input ports Ready to run
Status output
can be set from "01" to "10" Failure alarm
BA1
function. See table below. Open to end position
BA2
Basic Closed to end position
BA3
Menu Input Ports Exceeded torque in OPEN
BA4
Open BE1 Exceeded torque in CLOSED
BA5
Close BE2 Intermediate position 1
BA6 387
Shutdown BE3 385 Intermediate position 2
BA7
Alarm reset BE4 Remote control
BA8
Allow to open Local control
Allow to close Continuous signal
Local lock Pulse signal
Analog/ON/OFF OPEN (pulse signal)
control switch BA1 ~ BA8 digital output ports can end (continuous signal)
set from "01" to "20" function. See
ESD CLOSED (pulse signal)
table right.
Fast run end (continuous signal)
Analog/digital control
Basic: Four digital output ports. "OPEN" indication
385˖Four digital output ports and one analog output for "CLOSED" indication
valve position. ESD indication
386˖Fieldbus system, Profibus-DP or MODBUS. Manual/automatic state
387˖Analog input and output of valve position and three
Alarm if analog failure
digital output.

Ontrac Actuator Keeping Your Production Line On Track

05
MME/MOE Intelligent Electric Actuators
Electrical Wiring
Waterproof cable connector is provided in the attached zipper bag, protection class is IP67.
There are several connectors available˖
1 1 1(2 for plug-in 1 1(none for plug-in
end cover) end cover)

M32×1.5 M25×1.5 M16×1.5 M32→M25 M25→M16

for cable for cable for cable Waterproof Waterproof
Φ13̚Φ18 Φ10̚Φ16 Φ4.5̚Φ8 adaptor adaptor
Note 1: Exclusively use same protection level cable connector with Ontrac actuator in order to ensure stated protection level.
Note 2: All of the signal cable must be shielded.
Note 3: cable connecting seperate type actuators should not exceed more than 15 meters.
Note 4: After wiring, please use the plastic cover in attached zipper bag to screw unused cable hole.

Electrical wiring for digital signal input˖

1 2 3

L1 L2 L3 PE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
380V.AC BA1 BA2 BA3 BA4 BE1 BE2 BE3 BE4
50/60Hz
385 Func.board
DC
1 2 24V

+ + A B +
19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36
L N PE
24V.DC 24V.DC BA5 BA6 BA7 BA8 0/4̚20mA
220V.AC Output Input MODBUS Output
50/60Hz The contacts default as unactivated.

Electrical wiring for analog signal input˖

1 2 3

L1 L2 L3 PE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
380V.AC BA1 BA2 BA3 BA4 BE1 BE2 BE3 BE4
50/60Hz
387 Func.board
DC
1 2 24V

+ + A B + +
19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36
L N PE
24V.DC 24V.DC BA5 BA6 BA7 0/4̚20mA 0/4̚20mA
220V.AC Output Input MODBUS Input Output
50/60Hz The contacts default as unactivated.

Ontrac Actuator Keeping Your Production Line On Track

06
 MME/MOE Intelligent Electric Actuators
Installation



 





In some strong vibration or super high/low


temperature fields, Ontrac split actuator is

recommended, to ensure the normal opera-
tion.

Stardard terminals Plug-in terminals Screw terminals

Gebrauchsanweisung beachten
See Instructions

We offer three terminals connections as the following pictures. Stardard terminals connection
is fast and reliable, plug-in terminals easy to maintain, and screw terminals for explosion-proof
products.

For different installation sites,Ontrac' operation panel is

designed to be rotatable four direcitons. See the pictures
above.When actuator is side-mounted, the operation panel
still faces to the operator.

Ontrac Actuator Keeping Your Production Line On Track

07
MME/MOE Intelligent Electric Actuators
Mechanical Interfaces

SG Gearbox
PG Gearbox

“A” Output Worm gearbox

shaft for direct Worm
mounting gearbox with
base and
Linear thrust lever
unit

Linear Linear Multi-turn Part-turn Part-turn

2.3ν184kN 2.3ν184kN 6ν5400Nm ν4S ν4S

According to the mechanical interfaces, Ontrac electric actuators are divided into three categories:
1 Multi-turn: Actuator outputs at least 360°of angular displacement and torque. If equipped with A type output shaft
can realize a linear thrust motion.
2 Linear: Equipped with a linear thrust, actuator can output linear displacement and thrust, and valve stem directly
connected to the linear thrust rod.
3 Part-turn: Equipped with worm gear, actuator can output 90° of angular displacement and torque. Part-turn are
divided into two categories according to their installation.
3.1 Direct mounting: Worm gearbox is connected with the flange and output shaft hole.
3.2 With base and lever: Worm gearbox is mounted on the base, and valve is drived by lever and rod.

Ontrac Actuator Keeping Your Production Line On Track

08
 MME/MOE Intelligent Electric Actuators
Technical Data
Multi-turn Actuators (Modulating)
Tripping Switch-off Speed
Rising valve
Flange Power Current Fuse
Combination torque torque stem
(r.p.m) (ISO5210) (kW) (A) (A)
(Nm) (Nm) (mm)
MME806 15 12···30 35 38 F10 0.24 0.9 3×16A
MME808 30 24···60 35 38 F10 0.48 1.8 3×16A
MME812 60 48···120 35 38 F10 0.85 2.9 3×16A
MME825 125 100···250 35 55 F14 1.71 4.75 3×16A
MME850 200 160···400 35 55 F14 2.72 7.6 3×16A
MME808+PG80/4 102 82···204 8.8 38 F10/F14 0.48 1.8 3×16A
MME808+PG80/5 128 102···255 7 38 F10/F14 0.48 1.8 3×16A
MME812+PG80/4 204 163···408 8.8 38 F10/F14 0.85 2.9 3×16A
MME812+PG80/5 255 204···510 7 38 F10/F14 0.85 2.9 3×16A
MME890 400 320···800 35 68 F16 6.7 10.3 3× 20A
MME825+PG80/5 531 425···1062 7 55 F10/F14 1.71 4.75 3×16A
MME850+PGZ/4 720 576···1440 8.8 65 F25 2.72 7.6 3×16A
MME890+PGZ/3 1080 864···2160 11.7 75 F25 6.7 10.3 3× 20A
MME890+PGZ/6 2160 1728··4320 5.8 80 F30 6.7 10.3 3× 20A

Multi-turn Actuators (On-Off)

Switch-off Rising valve
Speed Flange Power Current Fuse
Combination torque stem
(r.p.m) (ISO5210) (kW) (A) (A)
(Nm) (mm)
MOE706S 6···15 180 38 F10 0.5 1.8 3×16A
MOE706R 10···25 92 38 F10 0.5 1.8 3×16A
MOE706M 12···30 35 38 F10 0.24 0.9 3×16A
MOE708S 12···30 180 38 F10 1 3.5 3×16A
MOE708R 20···50 92 38 F10 1 3.5 3×16A
MOE708M 24···60 35 38 F10 0.48 1.8 3×16A
MOE712S 24···60 180 38 F10 1.76 4.8 3×16A
MOE712R 40···100 92 38 F10 1.76 4.8 3×16A
MOE712M 48···120 35 38 F10 0.85 2.9 3×16A
MOE725S 50···125 180 55 F14 3.52 8 3×16A
MOE708S+PG80/5 51···127 36 38 F10/F14 1 3.5 3×16A
MOE708R+PG80/4 68···170 23 38 F10/F14 1 3.5 3×16A
MOE725R 80···200 92 55 F14 3.52 8 3×16A
MOE708M+PG80/4 82···204 8.8 38 F10/F14 0.48 1.8 3×16A
MOE712S+PG80/4 82···204 45 38 F10/F14 1.76 4.8 3×16A
MOE708R+PG80/5 85···212 18.4 38 F10/F14 1 3.5 3×16A
MOE725M 100···250 35 55 F14 1.71 4.75 3×16A
MOE708M+PG80/5 102···255 7 38 F10/F14 0.48 1.8 3×16A
MOE712S+PG80/5 102···255 36 38 F10/F14 1.76 4.8 3×16A

Ontrac Actuator Keeping Your Production Line On Track

09
MME/MOE Intelligent Electric Actuators
Technical Data
Multi-turn Actuators (On-Off cont.)
Switch-off Rising valve
Max.Speed Flange Power Current Fuse
Combination torque stem
(r.p.m) (ISO5210) (kW) (A) (A)
(Nm) (mm)
MOE750R 120···300 92 55 F14 4.1 12 3×16A
MOE712R+PG80/4 136···340 23 38 F10/F14 1.76 4.8 3×16A
MOE750P 160···400 72 55 F14 4.1 12 3×16A
MOE712M+PG80/4 163···408 8.8 38 F10/F14 0.85 2.9 3×16A
MOE712R+PG80/5 170···425 18.4 38 F10/F14 1.76 4.8 3×16A
MOE725S+PG80/4 170···425 45 55 F10/F14 3.52 8 3×16A
MOE712M+PG80/5 204···510 7 38 F10/F14 0.85 2.9 3×16A
MOE725S+PG80/5 212···531 36 55 F10/F14 3.52 8 3×16A
MOE725R+PG80/4 272···680 23 55 F10/F14 3.52 8 3×16A
MOE790M 320···800 35 68 F16 6.7 10.3 3× 20A
MOE725R+PG80/5 340···850 18.4 55 F10/F14 3.52 8 3×16A
MOE750R+PGZ/4 432···1080 23 65 F25 4.1 12 3×16A
MOE750P+PGZ/4 576···1440 18 65 F25 4.1 12 3×16A
MOE750R+PGZ/6 648···1620 15.3 75 F25 4.1 12 3×16A
MOE750P+PGZ/6 864···2000 12 75 F25 4.1 12 3×16A
MOE790R+PGZ/8 1368···3420 11.5 80 F30 7.5 14.5 3×20A
MOE790R+PGZ/12 2160··5400 7.5 80 F30 7.5 14.5 3×20A

Note 1: All actuators are self-locking except MOE7…S.

Note 2: Switch-off torque 10% variations due to mechanical efficiency alteration, 40% to 100% adjustable.

Equipped with "A" output shaft, actuator can drive valve rod to have a
linear motion. All axial force is sustained by "A" output shaft. The
following table is the transmission factor for stem trapezoidal thread.

Valve transmission factors (Axial forces = Thread size X Factor)

Thread size Factor Thread size Factor Thread size Factor Thread size Factor
Tr18×4 0.00190 Tr32×6 0.00323 Tr46×8 0.00457 Tr70×10 0.00666
Tr20×4 0.00205 Tr34×6 0.00339 Tr48×8 0.00472 Tr75×10 0.00704
Tr22×5 0.00234 Tr36×6 0.00354 Tr50×8 0.00487 Tr80×10 0.00741
Tr24×5 0.00250 Tr38×6 0.00369 Tr52×8 0.00502 Tr85×12 0.00806
Tr26×5 0.00265 Tr40×6 0.00384 Tr55×8 0.00525 Tr90×12 0.00844
Tr28×5 0.00279 Tr42×6 0.00399 Tr60×8 0.00563 Tr95×12 0.00882
Tr30×6 0.00309 Tr44×8 0.00441 Tr65×10 0.00628 Tr100×12 0.00920

Note: For inside screw non-rising gate valve, factors will be multiplied by 1.5, and the sluice,
factors be multiplied by 1.25, to ensure that the thrust 3 times larger than the weight of valve.

Ontrac Actuator Keeping Your Production Line On Track

10
 MME/MOE Intelligent Electric Actuators
Technical Data
Linear Actuator (Modulating)

Modulating Switch-off Factory force 40% Switch- Full Max.stroke

Combination
force(N) force(N) setting off force (N) speed (mm)

MME806+LE12.1 5768 11536 100% 4614 2.92mm/s 50/100/200/400/500

MME808+LE25.1 11536 23072 100% 9229 2.92mm/s 50/100/200/400/500
MME812+LE50.1 18749 37498 100% 14999 3.5mm/s 63/100/200/400
MME825+LE70.1 32051 64102 100% 25641 4.08mm/s 100/160/320/400
MME850+LE100.1 50000 100000 100% 41025 4.08mm/s 100/160/320/400
MME825+PG80/4+LE200.1 92391 184782 100% 73913 1.17mm/s 100/200/400/500

Linear Actuator (On-Off)

Switch-off Factory force 40% Switch- Full Max.stroke

Combination
force(N) setting off force (N) speed (mm)

MOE706S+LE12.1 5768 100% 2307 15mm/s 50/100/200/400/500

MOE706R+LE12.1 9613 100% 3845 7.67mm/s 50/100/200/400/500
MOE706M+LE12.1 11536 100% 4614 2.92mm/s 50/100/200/400/500
MOE708S+LE12.1 11536 100% 4614 15mm/s 50/100/200/400/500
MOE708R+LE25.1 19227 100% 7691 7.67mm/s 50/100/200/400/500
MOE708M+LE25.1 23072 100% 9229 2.92mm/s 50/100/200/400/500
MOE712S+LE25.1 23072 100% 9229 15mm/s 50/100/200/400/500
MOE712R+LE50.1 31248 100% 12499 9.2mm/s 63/100/200/400
MOE712M+LE50.1 37498 100% 14999 3.5mm/s 63/100/200/400
MOE725R+LE70.1 51282 100% 20513 10.73mm/s 100/160/320/400
MOE725M+LE70.1 64102 100% 25641 4.08mm/s 100/160/320/400
MOE750R+LE70.1 69230 90% 30769 10.73mm/s 100/160/320/400
MOE750R+LE100.1 76922 100% 30769 10.73mm/s 100/160/320/400
MOE750P+LE100.1 100000 100% 41025 8.4mm/s 100/160/320/400
MOE725R+PG80/4+LE200.1 147826 100% 59130 3.07mm/s 100/200/400/500
MOE725M+PG80/4+LE200.1 184782 100% 73913 1.17mm/s 100/200/400/500

Note 1: Switch-off force and speed adjustable, from 40% to 100%, at 5% step.
Note 2: Linear units are robust, entirely encapsulated unit.
Note 3: If listed in the above tables do not meet your requirements, we can
provide customized products.

Ontrac Actuator Keeping Your Production Line On Track

11
MME/MOE Intelligent Electric Actuators
Technical Data

Part-turn Actuators (Modulating)

Modulating Switch-off Factory torque 40% torque Whole stroke
Combination toruque torque
(Nm) (Nm) setting setting (Nm) time
MME806+ASNG50 248 495 100% 198 22s
MME808+ASNG100 485 970 70% 554 30s
MME808+ASNG200 743 1485 100% 594 33s
MME812+ASNG200 966 1931 65% 1188 33s
MME808+SG65/2+ASNG300 2106 2633 100% 1054 60s
MME812+ASNG300 2218 2772 100% 1109 30s
MME808+SG65/3+ASNG300 2400 3000 80% 1580 90s
MME808+SG65/3+ASNG600 3160 3950 100% 1580 90s
MME812+SG65/2+ASNG600 4214 5267 100% 2107 60s
MME808+SG65/4+ASNG600 4214 5267 100% 2107 120s
MME825+ASNG600 4620 5775 100% 2310 30s
MME812+SG65/3+ASNG600 4800 6000 80% 3160 90s
MME850+ASNG1000 7392 9240 100% 3696 30s
MME825+SG65/2+ASNG1000 8000 10000 95% 4389 60s
MME812+SG65/4+ASNG1000 8000 10000 95% 4214 120s
MME812+SG80/6+ASNG2000 13406 16758 100% 6703 180s
MME825+SG80/3+ASNG2000 13965 17456 100% 6983 90s
MME850+SG80/2+ASNG2000 14896 18620 100% 7448 60s
MME890+ASNG2000 15680 19600 100% 7840 30s
MME850+SG80/3+ASNG3500 20748 25935 100% 10374 84s
MME825+SG80/5+ASNG3500 21613 27016 100% 10806 140s
MME825+SG80/6+ASNG3500 25935 32419 100% 12967 168s
MME850+SG80/4+ASNG3500 27664 34580 100% 13832 112s
MME850+SG80/5+ASNG6500 34048 42560 100% 17024 138s
MME850+SG80/6+ASNG6500 40858 51072 100% 20429 165s
MME890+SG80/4+ASNG6500 52000 65000 100% 26240 110s

Part-turn Actuators (On-Off)

Switch-off Factory torque 40% torque
Combinaiton torque Whole stroke time
(Nm) setting setting (Nm)
MOE706S+ASNG50 248 100% 99 5s
MOE706R+ASNG50 413 100% 165 9s
MOE706M+ASNG50 495 100% 198 22s
MOE708R+ASNG50 495 60% 330 9s
MOE708S+ASNG50 495 100% 198 5s
MOE708S+ASNG100 693 100% 277 6s

Ontrac Actuator Keeping Your Production Line On Track

12
 MME/MOE Intelligent Electric Actuators
Technical Data
Part-turn Actuators (On-Off cont.)
Switch-off Factory torque 40% torque
Combination torque torque Whole stroke time
(Nm) setting (Nm)
MOE708M+ASNG100 970 70% 554 30s
MOE712S+ASNG100 970 70% 554 6s
MOE708R+ASNG100 982 85% 462 12s
MOE708R+ASNG200 1238 100% 495 13s
MOE708M+ASNG200 1485 100% 594 33s
MOE712S+ASNG200 1485 100% 594 7s
MOE712M+ASNG200 1931 65% 1188 33s
MOE712R+ASNG200 1980 80% 990 13s
MOE725S+ASNG200 2000 65% 1238 7s
MOE712R+ASNG300 2310 100% 924 12s
MOE708S+SG65/4+ASNG300 2633 100% 1053 24s
MOE712M+ASNG300 2772 100% 1109 30s
MOE708S+SG65/5+ASNG300 2963 90% 1317 30s
MOE712S+SG65/3+ASNG300 3000 80% 1580 18s
MOE708R+SG65/4+ASNG600 4389 100% 1756 46s
MOE712R+SG65/2+ASNG600 4389 100% 1756 23s
MOE725R+ASNG600 4620 100% 1848 12s
MOE712M+SG65/2+ASNG600 5267 100% 2107 60s
MOE725M+ASNG600 5775 100% 2310 30s
MOE708R+SG65/6+ASNG600 5925 90% 2633 69s
MOE712S+SG65/5+ASNG600 5925 90% 2633 30s
MOE725R+SG65/2+ASNG600 6000 70% 3511 23s
MOE712R+SG65/3+ASNG1000 6584 100% 2633 35s
MOE712S+SG65/6+ASNG1000 7900 100% 3160 35s
MOE725S+SG65/3+ASNG1000 8229 100% 3292 18s
MOE712R+SG65/4+ASNG1000 8778 100% 3511 46s
MOE750M+ASNG1000 9240 100% 3696 30s
MOE712R+SG65/5+ASNG1000 9875 90% 4389 58s
MOE725S+SG65/4+ASNG1000 9875 90% 4389 24s
MOE712R+SG80/6+ASNG2000 13965 100% 5586 69s
MOE725R+SG80/3+ASNG2000 13965 100% 5586 35s
MOE712R+SG80/7+ASNG2000 16293 100% 6517 80s
MOE725R+SG80/4+ASNG2000 18620 100% 7448 46s
MOE725S+SG80/7+ASNG2000 20000 100% 8146 41s
MOE712R+SG80/9+ASNG2000 20000 100% 8379 103s
MOE725S+SG80/12+ASNG3500 32419 100% 12968 65s
MOE725R+SG80/8+ASNG3500 34580 100% 13832 85s
MOE750P+SG80/5+ASNG6500 42560 100% 17024 67s
Ontrac Actuator Keeping Your Production Line On Track

13
MME/MOE Intelligent Electric Actuators
Technical Data
Part-turn Actuators (On-Off cont.)

Switch-off Factory torque 40% torque

Combination Whole stroke time
torque (Nm) setting setting (Nm)
MOE725R+SG80/11+ASNG6500 46816 100% 18726 115s
MOE750P+SG80/6+ASNG6500 51072 100% 20429 80s
MOE790R+SG80/6+ASNG6500 63800 100% 25536 63s
MOE750P+SG80/8+ASNG6500 65000 100% 27238 107s
MOE790R+SG80/7+ASNG13500 95000 100% 38000 125s
MOE790R+SG80/10+ASNG13500 135000 100% 54400 178s

Note 1: All products stroke can be adjusted within a range of 85°to 95° (mechanical limit).
Note 2: Switch-off variations of 10% due to mechanical efficiency alteration,and switch-off torque adjust-
able from 40% to 100% .
Note 3: Speed adjustable from 40% to 100%.
Note 4: If listed in the above table does not meet your requirements, we can provide customized products.

Ontrac Actuator Keeping Your Production Line On Track

14
Ontrac Actuator Keeping Your Production Line On Track

Copyright © 2013 Ontrac Instrument (Shanghai) Co.,Ltd. , All rights reserved.