Professional Documents
Culture Documents
Admin.. Water Tank
Admin.. Water Tank
6.2
1.8 1.8
0.2
0.35 0.15
1.65
1.3
0.35
Properties of materials
since tension is on water face, the design has to be done on basis of uncracked section.
A 6.3
2.1
A
1.8 2.6 1.8
PLAN OF THE WATER TANK
2.5
0.12
1.65
2.1 0.2
0.35
0.3
SECTION A-A
Properties of materials
Edge condition used for design purpose is tank with walls hinged at top & bottom.
The table 6 of IS:3370 (Part 4) corresponds to these edge conditions.
2.30 E
C A
1.86
F
4.30 D B
BENDING MOMENT
-ve sign means bending moment causing tension on inner face of wall
+ve sign means bending moment causing tension on outer face of wall
Mh = horizontal moment = My * w * a 3
Mv = vertical moment = Mx * w * a 3
SHEAR FORCE
Material
Dimensions
2525
3100
325
Loads
Lx 2.53 m
Ly 3.10 m
Ly / Lx 1.23
Since Moment produce tension on water face thickness of concrete from point of view of cracking is given below
Material
Dimensions
2525
6200
200
Loads
Lx 2.53 m
Ly 6.20 m
Ly / Lx 2.46
Condition
using table no 27 of IS456:2000
Mx My
+ve -ve +ve -ve
Design
deff 170 mm 160 mm
Ast Prov.
Dia 10 10
Spacing 100 100
Ast 785 785
p% 0.39 0.39
p% min 0.12 0.12
OK OK
Mu, lin
Conc 95.9 kN-m 84.9 kN-m
Steel 52.7 kN-m 49.3 kN-m
Deflection Check