Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 63 views

    Uper Allo P Rotool A (UN 66286) : Topics Covered

    Uploaded by

    Gangsar Dwika
    Super Alloy Pyrotool A is an iron-based, high-temperature and high-strength alloy used for tooling applications. It has good ductility up to 1200°F. The alloy contains nickel, chromium, titanium and other elements. It can be machined, formed, welded, and forged at temperatures from 1600-2200°F. Common heat treatments include solution annealing at 1800°F followed by aging to enhance strength. Applications include rings, liners, dies and other high-temperature tooling.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Uper Allo P Rotool A (UN 66286) : Topics Covered

    Uploaded by

    Gangsar Dwika
    63 views3 pages
    Super Alloy Pyrotool A is an iron-based, high-temperature and high-strength alloy used for tooling applications. It has good ductility up to 1200°F. The alloy contains nickel, chromium, titanium and other elements. It can be machined, formed, welded, and forged at temperatures from 1600-2200°F. Common heat treatments include solution annealing at 1800°F followed by aging to enhance strength. Applications include rings, liners, dies and other high-temperature tooling.

    Original Description:

    Super-Alloy-Pyrotool-A-(UNS-S66286)

    Original Title

    Super-Alloy-Pyrotool-A-(UNS-S66286)

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Super Alloy Pyrotool A is an iron-based, high-temperature and high-strength alloy used for tooling applications. It has good ductility up to 1200°F. The alloy contains nickel, chromium, titanium and other elements. It can be machined, formed, welded, and forged at temperatures from 1600-2200°F. Common heat treatments include solution annealing at 1800°F followed by aging to enhance strength. Applications include rings, liners, dies and other high-temperature tooling.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    63 views3 pages

    Uper Allo P Rotool A (UN 66286) : Topics Covered

    Uploaded by

    Gangsar Dwika
    Super Alloy Pyrotool A is an iron-based, high-temperature and high-strength alloy used for tooling applications. It has good ductility up to 1200°F. The alloy contains nickel, chromium, titanium and other elements. It can be machined, formed, welded, and forged at temperatures from 1600-2200°F. Common heat treatments include solution annealing at 1800°F followed by aging to enhance strength. Applications include rings, liners, dies and other high-temperature tooling.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 3

    Super Alloy Pyrotool A (UNS S66286)

    uper Allo Protool A (UN 66286)


    Jul 25 2013

    Topics Covered
    Introduction
    Chemical Composition
    Physical Properties
    Other Designations
    Fabrication and Heat Treatment
    Machinability
    Forming
    Welding
    Forging
    Cold Working
    Annealing
    Aging
    Applications

    Introduction
    Super alloy Pyrotool A is an iron based high temperature, high strength alloy. It is also a
    type of austenitic precipitation hardenable alloy. It has good ductility at temperatures up
    to 649°C (1200°F).

    Pyrotool A provides medium strength and oxidation resistance at reasonably low cost
    and at temperatures that are greater than that of stainless steels. The following sections
    will discuss in detail about super alloy Pyrotool A.

    Chemical Composition
    The chemical composition of Pyrotool A is outlined in the following table.

    Element Content (%)
    Nickel, Ni 25
    Chromium, Cr 14.5
    Titanium, Ti 2.2

    P
    Saved from URL: https://www.azom.com/article.aspx?ArticleID=9644
    1
    /3
    Super Alloy Pyrotool A (UNS S66286)

    Molybdenum, Mo 1.5
    Manganese, Mn 1.2
    Silicon, Si 0.5
    Carbon, C 0.04
    Iron, Fe Remainder

    Physical Properties
    The physical properties of Pyrotool A are tabulated below.

    Properties Metric Imperial


    Density 7.9 g/cm3 0.286 lb/in3
    Melting point 1399°C 2550°F

    Other Designations
    Equivalent materials to Pyrotool A are provided below.

    AMS 5525 AMS 5858 GE B50T1181 GE B50T12


    AMS 5732 AMS 5804 DIN 1.4944 GE B50T81
    AMS 5731 AMS 5853 DIN 1.4943 SPS M250
    AISI 662 AMS 5805 ASTM A638 Grade 660
    AMS 5726 AMS 5737 ASTM A453 Grade 660
    AISI 660 AMS 5734 AMS 5895

    Fabrication and Heat Treatment

    Machinability
    Super alloy Pyrotool A can be machined using all the common processes. Cemented
    carbide tools are recommended for use during turning operations.

    Forming
    Super alloy Pyrotool A can be cold and hot formed using any of the conventional
    methods.

    Welding
    Welding processes of super alloy Pyrotool A are similar to that of stainless steels. The
    area to be welded has to be properly cleaned. Preheating or post welding heat treatment

    P
    Saved from URL: https://www.azom.com/article.aspx?ArticleID=9644
    2
    /3
    Super Alloy Pyrotool A (UNS S66286)

    is not required.

    Forging
    Light forging can be performed in the temperature range of 871­1010°C (1600­1850°F).
    Heavy forging can be done in the temperature range of 1010­1204°C (1850­2200°F).

    Cold Working
    Pyrotool A can be cold formed.

    Annealing
    Pyrotool A can be solution annealed at 982°C (1800°F) and oil quenched, which should
    be followed by holding at 718°C (1325°F) for 16 h and air cooling. This treatment
    enhances high strength for the alloy.

    Aging
    This super alloy can be aged at 718°C (1325°F) for 16 h and air cooled to gain high
    strength. Prior to aging the alloy should solution heat treated.

    Applications
    Super alloy Pyrotool A is used in many application areas as listed below:

    Rings
    Liners
    Holders
    Mandrels
    Forging dies
    Dummy blocks
    Extrusion dies
    High­temperature tooling.

    P
    Saved from URL: https://www.azom.com/article.aspx?ArticleID=9644
    3
    /3

    You might also like