S E M I C O N D U C T O R HI-300 thru HI-307

December 1993 CMOS Analog Switches

Features Description
• Analog Signal Range (±15V Supplies) ±15V The Hl-300 thru Hl-307 series of switches are monolithic de-
• Low Leakage (Typical at +25oC) 40pA vices fabricated using CMOS technology and the Harris dielec-
• Low Leakage (Typical at +125oC) 1nA tric isolation process. These switches feature break-before-
make switching, (Hl-301, HI-303, HI-305 and HI-307 only), low
• Low On Resistance (Typical at +25oC) 35Ω
and nearly constant ON resistance over the full analog signal
• Break-Before-Make Delay (Typical) 60ns
range, and low power dissipation, (a few mW for the Hl-300 thru
• Charge Injection 30pC HI-303, a few hundred mW for the HI-304 thru HI-307).
• TTL, CMOS Compatible
The HI-300 thru HI-303 are TTL compatible and have a logic
• Symmetrical Switch Elements
“0” condition with an input less than 0.8V and a logic “1” condi-
• Low Operating Power 1.0mW (Typical for Hl-300 - 303)
tion with an input greater than 4.0V. The Hl-304 thru HI-307
Applications switches are CMOS compatible and have a low state with an
input less than 3.5V and a high state with an input greater than
• Sample and Hold (i.e. Low Leakage Switching)
11V. (See pinouts for switch conditions with a logic “1” input.)
• Op Amp Gain Switching (i.e. Low On Resistance)
• Portable, Battery Operated Circuits All the devices are available in a 14 lead Epoxy or Ceramic
• Low Level Switching Circuits DIP. The Hl-300, HI-301, HI-304 and HI-305 are also available
in a 10 pin Metal Can. Each of the switch types are available in
• Dual or Single Supply Systems
either the -55oC to +125oC or 0oC to +75oC operating ranges.

Datasheet.Live
Pinouts (Switch States are for a Logic “1” Input)
DUAL SPST HI-300 AND HI-304

(CDIP, PDIP, SOIC)

TOP VIEWS
(METAL CAN)
V+
SPST HI-301 AND HI-305

(CDIP, PDIP, SOIC)

TOP VIEWS
(METAL CAN)
V+
NC 1 14 V+ NC 1 14 V+ 10
10
D1 1 9 D2 D1 1 9 D2
D1 2 13 D2 D1 2 13 D2

NC 3 12 NC NC 3 12 NC S1 2 8 S2
S1 2 8 S2
S1 4 11 S2 S1 4 11 S2
3 7 NC
IN
IN1 3 7 IN2
NC 5 10 NC NC 5 10 NC
4 6
IN1 6 9 IN2 4 6 IN 6 9 NC NC 5 V-*
NC 5 V-* GND
GND 7 8 V- GND 7 8 V-
GND

LOGIC SWITCH * The substrate and case are LOGIC SW1 SW2 * The substrate and case are
internally tied to V-. (The case internally tied to V-. (The case
0 OFF should not be used as the V- 0 OFF ON should not be used as the V-
1 ON connection, however.) 1 ON OFF connection, however.)

DUAL DPST HI-302 AND HI-306 (PDIP, CDIP, SOIC) DUAL SPDT HI-303 AND HI-307 (PDIP, CDIP, SOIC)
TOP VIEW TOP VIEW

NC 1 14 V+ NC 1 14 V+

S3 2 13 S4 LOGIC SWITCH S3 2 13 S4 SW1 SW3

0 OFF LOGIC SW2 SW4
D3 3 12 D4 D3 3 12 D4
1 ON 0 OFF ON
D1 4 11 D2 D1 4 11 D2
1 ON OFF
S1 5 10 S2 S1 5 10 S2

IN1 6 9 IN2 IN1 6 9 IN2

GND 7 8 V- GND 7 8 V-

CAUTION: These devices are sensitive to electrostatic discharge. Users should follow proper I.C. Handling Procedures. File Number 3125
Copyright © Harris Corporation 1993
9-93
 HI-300 thru HI-307

Ordering Information
PART TEMPERATURE PART TEMPERATURE
NUMBER RANGE PACKAGE NUMBER RANGE PACKAGE
HI1-0300-2 -55oC to +125oC 14 Lead Ceramic DIP HI1-0304-2 -55oC to +125oC 14 Lead Ceramic DIP
HI1-0300-5 0oC to +75oC 14 Lead Ceramic DIP HI1-0304-5 0oC to +75oC 14 Lead Ceramic DIP
HI2-0300-2 -55oC to +125oC 10 Pin TO-5 Can HI2-0304-2 o o
-55 C to +125 C 10 Pin TO-5 Can
HI2-0300-5 0oC to +75oC 10 Pin TO-5 Can HI2-0304-5 0oC to +75oC 10 Pin TO-5 Can
HI3-0300-5 0oC to +75oC 14 Lead Plastic DIP HI3-0304-5 0oC to +75oC 14 Lead Plastic DIP
HI9P0300-5 0oC to +75oC 14 Lead SOIC HI9P0304-5 0oC to +75oC 14 Lead SOIC
HI9P0300-9 -40oC to +85oC 14 Lead SOIC HI9P0304-9 -40oC to +85oC 14 Lead SOIC
HI1-0301-2 -55oC to +125oC 14 Lead Ceramic DIP HI1-0305-2 -55oC to +125oC 14 Lead Ceramic DIP
HI1-0301-5 0oC to +75oC 14 Lead Ceramic DIP HI1-0305-5 0oC to +75oC 14 Lead Ceramic DIP
o o
HI2-0301-2 -55 C to +125 C 10 Pin TO-5 Can HI2-0305-2 -55oC to +125oC 10 Pin TO-5 Can
HI2-0301-5 0oC to +75oC 10 Pin TO-5 Can HI2-0305-5 0oC to +75oC 10 Pin TO-5 Can
o o
HI3-0301-5 0 C to +75 C 14 Lead Plastic DIP HI3-0305-5 0oC to +75oC 14 Lead Plastic DIP
HI9P0301-5 0oC to +75oC 14 Lead SOIC HI9P0305-5 0oC to +75oC 14 Lead SOIC
HI9P0301-9 -40oC to +85oC 14 Lead SOIC HI9P0305-9 o o
-40 C to +85 C 14 Lead SOIC
HI1-0302-2 -55oC to +125oC 14 Lead Ceramic DIP HI1-0306-2 -55oC to +125oC 14 Lead Ceramic DIP
HI1-0302-5 0oC to +75oC 14 Lead Ceramic DIP HI1-0306-5 0oC to +75oC 14 Lead Ceramic DIP
o o
HI3-0302-5 0 C to +75 C 14 Lead Plastic DIP HI3-0306-5 0oC to +75oC 14 Lead Plastic DIP
HI9P0302-5 0oC to +75oC 14 Lead SOIC HI9P0306-5 0oC to +75oC 14 Lead SOIC
HI9P0302-9 -40oC to +85oC 14 Lead SOIC HI9P0306-9 o o
-40 C to +85 C 14 Lead SOIC
HI1-0303-2 -55oC to +125oC 14 Lead Ceramic DIP HI1-0307-2 -55oC to +125oC 14 Lead Ceramic DIP
HI1-0303-5 0oC to +75oC 14 Lead Ceramic DIP HI1-0307-5 0oC to +75oC 14 Lead Ceramic DIP
o o
HI3-0303-5 0 C to +75 C 14 Lead Plastic DIP HI3-0307-5 0oC to +75oC 14 Lead Plastic DIP
HI9P0303-5 0oC to +75oC 14 Lead SOIC HI19P307-5 0oC to +75oC 14 Lead SOIC
HI9P0303-9 -40oC to +85oC 14 Lead SOIC HI9P0307-9 -40oC to +85oC 14 Lead SOIC

Functional Block Diagram

TYPICAL SWITCH HI-300 SERIES

IN N P

9-94
 HI-300 thru HI-307

Schematic Diagrams SWITCH CELL

A
V+
MN1B

MN2B MN3B
MP5B

IN MP4B OUT
MN4B

MN6B
MP3B MP2B

MP1B
V-
A

DIGITAL INPUT BUFFER AND LEVEL SHIFTER

V+

D2A MP1A MP2A MP3A MP4A MP5A MP6A MP7A MP8A

200Ω
LOGIC A
IN A
D1A MN1A MN2A MN3A MN4A MN5A MN6A MN7A MN8A

GND
V-
SWITCH CELL DRIVER
(ONE PER SWITCH CELL)

9-95
 Specifications HI-300 thru HI-307

Absolute Maximum Ratings Thermal Information

Voltage Between Supplies . . . . . . . . . . . . . . . . . . . . . . . 44V (±22V) Thermal Resistance θJA θJC
Digital Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . +VSUPPLY +4V 14 Lead Ceramic DIP . . . . . . . . . . . . . . . 95oC/W 24oC/W
-VSUPPLY -4V 14 Lead Plastic DIP . . . . . . . . . . . . . . . . . . . 100oC/W -
Analog Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . +VSUPPLY +1.5V 14 Lead SOIC . . . . . . . . . . . . . . . . . . . . . 120oC/W -
-VSUPPLY -1.5V 10 Pin TO-100 Metal Can . . . . . . . . . . . . 136oC/W 65oC/W
Storage Temperature Range . . . . . . . . . . . . . . . . . -65oC to +150oC Maximum Power Dissipation
Lead Temperature (Soldering 10s) . . . . . . . . . . . . . . . . . . . . +300oC Ceramic DIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 588mW
Typical Derating Factor. . . . . . . . . . .1.5mA/MHz Increase in ICCOP Plastic DIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 526mW
ESD Classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 1 Metal Can . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 435mW
Derate 6.9mW/0oC above TA = +70oC
Operating Temperature Range
HI-3XX-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -55oC to +125oC
HI-3XX-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0oC to +75oC
Junction Temperature
Ceramic DIP, TO-Can . . . . . . . . . . . . . . . . . . . . . . . . . . . . +175oC
Plastic DIP, SOIC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +150oC
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation
of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.

Electrical Specifications Supplies = +15V, -15V; VIN = Logic Input. HI-300-303: VIN - for Logic “1” = 4V, for Logic “0” = 0.8V.
HI-304-307: VIN - for Logic “1” = 11V, for Logic “0” = 3.5V, Unless Otherwise Specified.

-55oC TO +125oC 0oC TO +75oC

PARAMETERS TEMP MIN TYP MAX MIN TYP MAX UNITS
SWITCHING CHARACTERISTICS
Break-Before-Make Delay, tOPEN (Note 15) +25oC - 60 - - 60 - ns
o
Switch On Time, tON (Note 13) +25 C - 210 300 - 210 300 ns
o
Switch Off Time, tOFF (Note 13) +25 C - 160 250 - 160 250 ns
Switch Off Time, tON (Note 14) +25oC - 160 250 - 160 250 ns
o
Switch Off Time, tOFF (Note 14) +25 C - 100 150 - 100 150 ns
o
“Off Isolation” (Note 6) +25 C - 60 - - 60 - dB
o
Charge Injection (Note 7) +25 C - 3 - - 3 - mV
Input Switch Capacitance, CS(OFF) +25oC - 16 - - 16 - pF
o
Output Switch Capacitance, CD(OFF) +25 C - 14 - - 14 - pF
o
Output Switch Capacitance, CD(ON) +25 C - 35 - - 35 - pF
o
(High) Digital Input Capacitance, CIN +25 C - 5 - - 5 - pF
(Low) Digital Input Capacitance, CIN +25oC - 5 - - 5 - pF
DIGITAL INPUT CHARACTERISTICS
Input Low Level, VINL (Note 13) Full - - 0.8 - - 0.8 V
Input High Level, VINH (Note 13) Full 4 - - 4 - - V
Input Low Level, VINL (Note 14) Full - - 3.5 - - 3.5 V
Input High Level, VINH (Note 14) Full 11 - - 11 - - V
Input Leakage Current (Low), IINL (Note 5) Full - - 1 - - 1 µA
Input Leakage Current (High), IINH (Note 5) Full - - 1 - - 1 µA
ANALOG SWITCH CHARACTERISTICS
Analog Signal Range Full -15 - +15 -15 - +15 V
On Resistance, RON (Note 2) +25 Co
- 35 50 - 35 50 Ω
Full - 40 75 - 40 75 Ω
Off Input Leakage Current, IS(OFF) (Note 3) +25oC - 0.04 1 - 0.04 5 nA
Full - 1 100 - 0.2 100 nA

9-96
 Specifications HI-300 thru HI-307

Electrical Specifications Supplies = +15V, -15V; VIN = Logic Input. HI-300-303: VIN - for Logic “1” = 4V, for Logic “0” = 0.8V.
HI-304-307: VIN - for Logic “1” = 11V, for Logic “0” = 3.5V, Unless Otherwise Specified. (Continued)

-55oC TO +125oC 0oC TO +75oC

PARAMETERS TEMP MIN TYP MAX MIN TYP MAX UNITS
o
Off Output Leakage Current, ID(OFF) (Note 3) +25 C - 0.04 1 - 0.04 5 nA
Full - 1 100 - 0.2 100 nA
On Leakage Current, ID(ON) (Note 4) +25oC - 0.03 1 - 0.03 5 nA
Full - 0.5 100 - 0.2 100 nA
POWER SUPPLY CHARACTERISTICS
Current, I+ (Notes 8, 13) +25oC - 0.09 0.5 - 0.09 0.5 mA
Full - - 1 - - 1 mA
Current, I- (Notes 8, 13) +25oC - 0.01 10 - 0.01 100 µA
Full - - 100 - - - µA
Current, I+ (Notes 9, 13) o
+25 C - 0.01 10 - 0.01 100 µA
Full - - 100 - - - µA
Current, I- (Notes 9, 13) +25oC - 0.01 10 - 0.01 100 µA
Full - - 100 - - - µA
Current, I+ (Notes 10, 14) o
+25 C - 0.01 10 - 0.01 100 µA
Full - - 100 - - - µA
Current, I- (Notes 10, 14) +25oC - 0.01 10 - 0.01 100 µA
Full - - 100 - - - µA
Current, I+ (Notes 11, 14) o
+25 C - 0.01 10 - 0.01 100 µA
Full - - 100 - - - µA
Current, I- (Notes 11, 14) +25oC - 0.01 10 - 0.01 100 µA
Full - - 100 - - - µA
NOTES:
1. As with all semiconductors, stresses listed under “Absolute Maximum Ratings” may be applied to devices (one at a time) without resulting
in permanent damage. This is a stress rating only. Exposure to absolute maximum rating conditions for extended periods may affect de-
vice reliability. The conditions listed under “Electrical Specifications” are the only conditions recommended for satisfactory operation.
2. VS = ±10V, IOUT = 10mA. On resistance derived from the voltage measured across the switch under the above conditions.
3. VS = ±14V, VD = 14V.
4. VS = VD = ±14V.
5. The digital inputs are diode protected MOS gates and typical leakages of 1nA or less can be expected.
6. VS = 1VRMS, f = 500kHz, CL = 15pF, RL = 1K.
7. VS = 0V, CL = 10,000pF, Logic Drive = 5V pulse. (HI-300 - 303) Switches are symmetrical; S and D may be interchanged. Logic Drive =
15V (HI-304 - 307).
8. VIN = 4V (one input) (all other inputs = 0V).
9. VIN = 0.8V (all inputs).
10. VIN = 15V (all inputs).
11. VIN = 0V (all inputs).
12. To drive from DTL/TTL circuits, pullup resistors to +5V supply are recommended.
13. HI-300 thru HI-303 only.
14. HI-304 thru HI-307 only.
15. HI-301, HI-303, HI-305, HI-307 only.

9-97
 HI-300 thru HI-307

Typical Performance Curves

80 80
TA = +25oC

DRAIN TO SOURCE ON RESISTANCE (Ω)

DRAIN TO SOURCE ON RESISTANCE (Ω)

V+ = +15V, V- = -15V D

60 60
C

+125oC
+25oC 40 B
40
-55oC
A

20 20
A V+ = +15V, V- = -15V
B V+ = +10V, V- = -10V
C V+ = +7.5V, V- = -7.5V
D V+ = +5V, V- = -5V
0 0
-15 -10 -5 0 5 10 15 -15 -10 -5 0 5 10 15
DRAIN VOLTAGE (V) DRAIN VOLTAGE (V)

FIGURE 1. RDS(ON) vs VD AND TEMPERATURE FIGURE 2. RDS(ON) vs VD AND POWER SUPPLY VOLTAGE

100 100
V+ = +15V, V- = -15V V+ = +15V, V- = -15V
TA = +25oC, VS = 15V, RL = 2K CLOAD = 30pF, VS = 1VRMS
80
POWER DISSIPATION (mW)

OFF ISOLATION (dB)

RL = 100Ω
10
60

RL = 1kΩ
HI-300 THRU HI-303 40
1.0

20
HI-304 THRU HI-307

0.1 0
1 10 100 1K 10K 100K 1M 105 106 107 108
LOGIC SWITCHING FREQUENCY (50% DUTY CYCLE) (Hz) FREQUENCY (Hz)

FIGURE 3. DEVICE POWER DISSIPATION vs SWITCHING FIGURE 4. OFF ISOLATION vs FREQUENCY

FREQUENCY SINGLE LOGIC INPUT
SOURCE OR DRAIN OFF LEAKAGE CURRENT (nA)

10.0 10.0
V+ = +15V, V- = -15V V+ = +15V, V- = -15V
| VD | = | VS | = 14V
ID(ON) CHANNEL LEAKAGE (nA)

1.0 1.0

0.1 0.1

0.01 0.01
25 75 125 25 75 125
TEMPERATURE (oC) TEMPERATURE (oC)

FIGURE 5. IS(OFF) OR ID(OFF) vs TEMPERATURE† FIGURE 6. ID(ON) vs TEMPERATURE†

†The net leakage into the source or drain is the n-channel leakage minus the p-channel leakage. This difference can be positive, negative or
zero depending on the analog voltage and temperature, and will vary greatly from unit to unit.

9-98
 HI-300 thru HI-307

Typical Performance Curves (Continued)

+15V
V+ 6
HI-300 THRU HI-303
4

LOGIC INPUT (V)

RGEN = 0 S D
2
RL CL 0
VGEN 10kΩ 10pF
IN LOGIC INPUT

V-
VLOGIC GND
-15V 0 0.4 0.8 1.2 1.6
TIME (µs)

7A. TEST CIRCUIT 7B. VIN(LOGIC) vs TIME

15

OUTPUT VOLTAGE (V)

HI-304 THRU HI-307
10 +10 (SEE NOTE)
LOGIC INPUT (V)

5 +5 VGEN = 10V
0 0
LOGIC INPUT

0 0.4 0.8 1.2 1.6 0 0.4 0.8 1.2 1.6

TIME (µs) TIME (µs)

7C. VIN(LOGIC) vs TIME 7D. VOUT vs TIME

OUTPUT VOLTAGE (V)

OUTPUT VOLTAGE (V)

+5 +5
0 0
VGEN = 5V VGEN = 0V
-5

0 0.4 0.8 1.2 1.6 0 0.4 0.8 1.2 1.6

TIME (µs) TIME (µs)

7E. VOUT vs TIME 7F. VOUT vs TIME

OUTPUT VOLTAGE (V)

OUTPUT VOLTAGE (V)

0 0
-5 -5
VGEN = -5V
-10
VGEN = -10V

0 0.4 0.8 1.2 1.6 0 0.4 0.8 1.2 1.6

TIME (µs) TIME (µs)

7G. VOUT vs TIME 7H. VOUT vs TIME

NOTE: If RGEN, RL or CL is increased, there will be proportional increases in rise and/or fall RC times.
FIGURE 7. TYPICAL DELAY, RISE, FALL, SETTLING TIMES AND SWITCHING TRANSIENTS

9-99
 HI-300 thru HI-307

Typical Performance Curves (Continued)

60 16
OUTPUT ON CAPACITANCE (pF)

INPUT ON CAPACITANCE (pF)

50 12

40 8
TRANSITION (INDETERMINATE
DUE TO ACTIVE INPUT) HI-300 THRU HI-303

30 4

HI-304 THRU HI-307

TRANSITION

20
0 2 4 6 8 10 12 14 16 0 2 4 6 8 10 12 14 16
DRAIN VOLTAGE (V) INPUT VOLTAGE (V)

FIGURE 8. OUTPUT ON CAPACITANCE vs DRAIN VOLTAGE FIGURE 9. DIGITAL INPUT CAPACITANCE vs INPUT VOLTAGE

300 300
V+ = +15V, V- = -15V V+ = +15V, V- = -15V
VINH = 4.0V, VINL = 0V VINH = 15V, VINL = 0V

tON
SWITCHING TIME (ns)

SWITCHING TIME (ns)

200 200
tON

tOFF

100 100
tOFF

-55 -35 -15 5 25 45 65 85 105 125 -55 -35 -15 5 25 45 65 85 105 125
TEMPERATURE (oC) TEMPERATURE (oC)

FIGURE 10. SWITCHING TIME vs TEMPERATURE, HI-300 THRU FIGURE 11. SWITCHING TIME vs TEMPERATURE, HI-304 THRU
HI-303 HI-307

V+ = +15V, TA = +25oC V+ = +15V, TA = +25oC

VINH = 4V, VINL = 0V tON VINH = 15V, VINL = 0V
300 tON 300
SWITCHING TIME (µs)

SWITCHING TIME (µs)

200 tOFF 200

tOFF

100 100

0 5 10 15 0 5 10 15
NEGATIVE SUPPLY (V) NEGATIVE SUPPLY (V)

FIGURE 12. SWITCHING TIME vs NEGATIVE SUPPLY FIGURE 13. SWITCHING TIME vs NEGATIVE SUPPLY
VOLTAGE, HI-300 THRU HI-303 VOLTAGE, HI-304 THRU HI-307

9-100
 HI-300 thru HI-307

Typical Performance Curves (Continued)

SWITCHING TIME/BREAK-BEFORE-MAKE TIME (µs)

1.8 1.8
V- = -15V, TA = +25oC
V- = -15V, TA = +25oC
1.6 1.6 VINH = 4.0V, VINL = 0V
VINH = 15V, VINL = 0V

1.4 1.4
SWITCHING TIME (µs)

1.2 1.2

1.0 1.0

0.8 0.8

0.6 0.6
tON
0.4 0.4
tOFF tON tOFF
0.2 0.2 tBBM
HI-301/303 ONLY
0 0
0 5 10 15 0 5 10 15
POSITIVE SUPPLY VOLTAGE (V) POSITIVE SUPPLY VOLTAGE (V)

FIGURE 14. SWITCHING TIME vs POSITIVE SUPPLY VOLTAGE, FIGURE 15. SWITCHING TIME AND BREAK-BEFORE-MAKE
HI-304 THRU HI-307 TIME vs POSITIVE SUPPLY VOLTAGE, HI-300
THRU HI-303

7
INPUT SWITCHING THRESHOLD VOLTAGE (V)

V- = -15V, TA = +25oC
6 HI-304 THRU 307

2
HI-300 THRU 303
1

0
0 5 10 15
POSITIVE SUPPLY VOLTAGE (V)

FIGURE 16. INPUT SWITCHING THRESHOLD vs POSITIVE SUPPLY VOLTAGE, HI-300 THRU HI-307

9-101
 HI-300 thru HI-307

Test Circuits
SWITCH TYPE VINH SWITCH TYPE VINH

HI-300 thru HI-303 4V HI-301, HI-303 5V

HI-304 thru HI-307 15V HI-305, HI-307 15V

+15V +15V
V+ V+
S1 D1
VS1 = +3V OUT 1
S D VO S2 D2
SWITCH
VS = +3V VS2 = +3V
OUTPUT OUT 2
RL CL
300Ω 33pF RL2 CL2 RL1 CL1

LOGIC
LOGIC INPUT V-
INPUT V-
GND -15V
GND -15V

LOGIC “1” = SWITCH ON

LOGIC RL1 = RL2 = 300Ω
INPUT VINH CL1 = CL2 = 33pF
LOGIC “1” = SWITCH ON
0V
LOGIC VINH
INPUT 50% 50% 50% 50%
0V
0V OUT 1
VS
90% OUT 2
10% SWITCH
50% 50%
0V OUTPUT
tOFF 0V
SWITCH
OUTPUT tON tBBM tBBM

FIGURE 17. SWITCHING TEST CIRCUIT (tON, tOFF) FIGURE 18. BREAK-BEFORE-MAKE TEST CIRCUIT (tBBM)

9-102