Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

LED Array Light Module: Specifications

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

COG-1046 LED Array Spec Sheet_v2 9/15/06 11:44 AM Page 1

LED Array Light Module

In order to achieve the highest-quality images possible, Cognex ®


offers a wide variety of light modules. The LED array light module
is designed for use in typical bar light applications, including front,
angle, and multiple-angle lighting (for feature highlighting). The
LED Array light module is available in red, white, and IR models.
Additionally, an optional diffuser enhances this light module's front
lighting performance, and also allows it to be used as a backlight.

Models
• White LED Array Module: Model IDWA
• IR LED Array Module: Model IDIA
• Red LED Array Module: Model IDRA

specifications
Mechanical Notes:
1. All measurements are provided in millimeters
(first number) and inches (number in parenthesis)
2. Light module shown without optional diffuser installed
LED Array

81.05
72.00 Typ. (3.19)
(2.83) 83.70*
(3.30)*

30.00
19.05 (1.18)
(0.75) 34.25*
(1.35)*

* With optional diffuser installed


COG-1046 LED Array Spec Sheet_v2 9/15/06 11:44 AM Page 2

LED Array Light Module

Electrical

Female Pinout
Breakout Boards
(cable end)
Wire Pin CON-IBOB CON-BRK
4 Function In-Sight ® CIO-1350/1450
Color Number * (500 Only) (600 Only)

3 Brown 1 + 24V 24V 16: V+ 24VDC


1
White 2 No connection N /A No connection N/A

Blue 3 Ground GND 15: GND GND

Black 4 Strobe Input IO8 14: or 17-20: High-speed Output (0/1)


signal IO12
2
*See figure at left for this numbering scheme

LED Light Part Max Max Duty Max Average


Wavelength
Color Number Current Cycle Current

Red 670nm IDRA 1.25 A 15% 188 mA

Infrared 850nm IDIA 4.5 A 5% 225 mA

White Not Applicable IDWA 1.1 A 15% 165 mA

*General characteristics: Voltage Supply = 24V, Trigger Voltage = 15V, Max single pulse = 50ms

optional accessories
LED Light Bracket (P/N ID0A-BR)

Note: All units in millimeters.


Optional Description Part Number
Accessory

Standoffs/ Hex Standoffs and screws for LED Array mounting.


Includes four 3/4" long 6/32 hex threaded standoffs ID0A-SE
Screws and four 3/4" long 6/32 socket head screws.

LED Array 6-meter (19.7 ft) pigtailed cable,


CBL-P18
Module Cable M12 connectors with bare wire ends

LED Array
51mm (2 in) diffuser for all models ILC-605
Module Diffuser

Corporate Headquarters: One Vision Drive, Natick, MA 01760-2059 (508) 650-3000 fax: (508) 650-3344 www.cognex.com
Offices: Canada (905) 634-2726 • China +86 21 6320 3821 • France +33 1 4777 1550 • Germany +49 721 6639 0 • Ireland +353 1 825 4420 • Italy +39 02 6747 1200 • Japan +81 3 5977 5400
Korea +82 2 539 9047 • Netherlands +31 402 668 565 • Singapore +65 6325 5700 • Spain +34 93 445 67 78 • Sweden +46 21 14 55 88 • Switzerland +41 71 313 06 05 • Taiwan +886 3 578 0060
United Kingdom +44 1908 206 000
© Copyright 2006, Cognex Corporation. All information in this document is subject to change without notice. Cognex and In-Sight are registered trademarks of Cognex Corporation.
All other trademarks are the property of their respective owners. All rights reserved. Printed in the USA. 09-06

You might also like