Submersible Borehole Pump

UPA S

8-inch

Type Series Booklet

Legal information/Copyright
Type Series Booklet UPA S

All rights reserved. The contents provided herein must neither be distributed, copied, reproduced,
edited or processed for any other purpose, nor otherwise transmitted, published or made available to a
third party without the manufacturer's express written consent.
Subject to technical modification without prior notice.

© KSB SE & Co. KGaA, Frankenthal 27/03/2020

 Contents

Contents
Water Supply.....................................................................................................................................................  4
Submersible Borehole Pumps .................................................................................................................................................... 4
UPA S 200.............................................................................................................................................................................. 4
Main applications........................................................................................................................................................... 4
Fluids handled ................................................................................................................................................................ 4
Operating data............................................................................................................................................................... 4
Design details ................................................................................................................................................................. 4
Designation .................................................................................................................................................................... 5
Materials ......................................................................................................................................................................... 5
Product benefits ............................................................................................................................................................. 5
Certifications .................................................................................................................................................................. 5
Product information ...................................................................................................................................................... 5
Technical data ................................................................................................................................................................ 7
Scope of supply ............................................................................................................................................................ 16
Related Documents ............................................................................................................................................................ 17
List of components....................................................................................................................................................... 17
Electrical accessories..................................................................................................................................................... 27
Power cables................................................................................................................................................................. 28
Cable connector ........................................................................................................................................................... 32
Cable clips ..................................................................................................................................................................... 34
Flow velocity past the motor....................................................................................................................................... 35

3
 Water Supply
Submersible Borehole Pumps

Water Supply Design details

Submersible Borehole Pumps Design

▪ Centrifugal pump
▪ Single-stage or multistage
UPA S 200 ▪ Single-entry
▪ Ring-section design
▪ Rigid connection between pump and motor

Type of installation
▪ Vertical installation
▪ Horizontal installation

Drive
Asynchronous motor:
▪ With squirrel cage motor for submerged use
▪ Standard connection to NEMA
▪ Frequency 50 Hz/60 Hz
▪ IP68 enclosure
▪ DOL starting or star-delta starting
▪ Frequency of starts ≤ 15 starts per hour
▪ Winding J1 (PVC) or, for higher temperatures, J2 (VPE /
XLPE)
Main applications
Synchronous motor:
▪ Spray irrigation systems
▪ Interior (buried) permanent magnet synchronous motor
▪ General irrigation systems (IPMSM)
▪ Pressure boosting ▪ IP68 enclosure
▪ Lowering groundwater levels ▪ Standard connection to NEMA
▪ Water supply systems ▪ Winding J2 (VPE / XLPE)
▪ Frequency of starts ≤ 15 starts per hour

Fluids handled
▪ Drinking water
Electrical connection
▪ Delivered ex-factory with 1 or 2 motor leads (including
▪ River water, lake water and groundwater earth conductor and internal earthing)
▪ Maximum sand content in fluid handled depending on ▪ Extension cable connected with water-tight cable
1)
particle size and duration, sand content up to 250 g/m3 connector
▪ Motor lead and extension cable suitable for drinking
water use
Operating data
Operating properties Impeller type
Characteristic Value ▪ Mixed flow design
Flow rate Q [m3/h] ≤ 170
Q [l/s] ≤ 47 Bearings
Head H [m] ≤ 450 ▪ Radial plain bearings
Fluid temperature T [°C] ≤ +50
▪ Pump bearings lubricated by fluid handled; motor
Speed n [rpm] ≤ 3600 bearings lubricated by water fill
Well diameter D [mm] ≥ 200 ▪ Axial thrust is balanced by a tilting-pad thrust bearing in
D [″] ≥ 8 the motor (lower end)
3400.55/01-EN

▪ Intermediate bearing in every stage

Connections
▪ Pump screw-ended or flanged
▪ With lift check valve or connection branch

1) For 50 g/m³ and above, a model with silicon bearings and metal casing wear rings is available and recommended.

4 UPA S 200
 Water Supply
Submersible Borehole Pumps

Designation

Example: UPA S 200 - 100 / 4

Designation key

Code Description
UPA Pump type series
S Product line S
200 Nominal size [mm]
100 Flow rate at best efficiency point [m³/h]
4 Number of stages

Materials
Pump material selection, UPA S 200
Component Material variant
E D
Impeller CrNiMo steel (1.4408) CrNiMo steel (1.4517)
Suction casing CrNiMo steel (1.4408) CrNiMo steel (1.4517)
Lift check valve body CrNiMo steel (1.4408) CrNiMo steel (1.4517)
Screws, bolts and nuts CrNiMo steel (A4) CrNiMo steel (duplex)
Stage casing CrNiMo steel (1.4408) CrNiMo steel (1.4517)
Shaft CrNiMo steel (1.4462) CrNiMo steel (1.4462)

Motor material selection, UMA 150E, UMA-S 150E, UMA 200D, UMA-S 200D, UMA 250D
Component Material variant
G C1 C2 C3
Housing 150E - CrNi steel (1.4301) CrNiMo steel (1.4571) CrNiMo steel (1.4539)
200D Grey cast iron (EN- - CrNiMo steel (1.4408) CrNiMo steel (1.4539)
GJL-200)
250D Grey cast iron (EN- - CrNiMo steel (1.4408) CrNiMo steel (1.4539)
GJL-200)
Screws, bolts and 150E - CrNiMo steel (A4-70) CrNiMo steel (A4-70) CrNiMo steel (1.4539)
nuts 200D CrNiMo steel (A4-70) - CrNiMo steel (A4-70) CrNiMo steel (1.4539)
250D CrNiMo steel (A4-70) - CrNiMo steel (A4-70) CrNiMo steel (1.4539)
Shaft 150E - CrNi steel (1.4021)2) / CrNiMo CrNiMo steel (1.4462) CrNiMo steel (1.4462)
steel (1.4462)3)
200D CrNiMo steel (1.4460) - CrNiMo steel (1.4460) CrNiMo steel (1.4462)
250D CrNiMo steel (1.4460) - CrNiMo steel (1.4460) CrNiMo steel (1.4462)

Product benefits Certifications

▪ High efficiencies through optimised hydraulic design
Overview
▪ High operating reliability as all components are made of
Label Effective in: Comment
high-quality stainless steel.
All countries Certified quality management to
▪ Overall efficiency can be further increased by combining ISO 9001
the pump with an UMA-S150E or UMA-S 200D
synchronous motor.
▪ Reliable operation by anti-jam lift check valve France Approved in accordance with the
▪ Easy to install with service-friendly hydraulic system design French drinking water regulation

▪ Solids-induced wear can be minimised by metal wear rings

and bearings with enhanced wear resistance (optional).
3400.55/01-EN

▪ Patented intake chamber provides optimum flow Product information

conditions at low heads.

Product information as per Regulation No.

1907/2006 (REACH)
For information as per chemicals Regulation (EC) No. 1907/2006
(REACH), see http://www.ksb.com/reach.

2) For motors < 18.5 kW

3) For motors ≥ 18.5 kW

UPA S 200 5
 Water Supply
Submersible Borehole Pumps

Overview of submersible motors

The following submersible motors are available:

Selection table

Well diameter Motor size Voltage range Rated power

6 inches UMA 150E Up to 1 kV 5.5 to 37 kW
6 inches UMA-S 150E Up to 1 kV 5.5 to 37 kW
8 inches UMA 200D Up to 1 kV 37 to 90 kW
8 inches UMA-S 200D Up to 1 kV 37 to 150 kW
10 inches UMA 250D Up to 1 kV 85 to 190 kW

▪ Further motor data for the UMA asynchronous motor see type series booklet No. 3455.51
▪ Further motor data for the UMA-S synchronous motor see type series booklet No. 3455.52

3400.55/01-EN

6 UPA S 200
 Water Supply
Submersible Borehole Pumps

Technical data
Selection chart
50 [US.gpm] 100 200 300 400 500 1000

40 50 [IM.gpm] 100 200 300 400 500

500
400
300 1000

200
500
1 400
100
300
2
200
50 3
40

30 100
4
20

H [m] 50
40
10 30

20
5
[ft]
4
3 10
10 Q [m3/h] 20 30 40 50 100 200 250

3 4 5 [l/s] 10 20 30 40 50

Fig. 1: Selection chart UPA S

① UPA S 200 - 52
② UPA S 200 - 75
③ UPA S 200 - 100
④ UPA S 200 - 135

Information on characteristic curves

The characteristic curves shown are intended to allow pre-
selection. Refer to the quotation for the precise selection data.
▪ Tolerance to ISO 9906 Cl. 2B
▪ Threaded end to DIN ISO 228, Part 1
▪ Flanged end to DIN EN 1092
3400.55/01-EN

UPA S 200 7
 Water Supply
Submersible Borehole Pumps

UPA S 200 - 52 / ..., number of stages 1 - 13

0 100 Q [US.gpm] 200 300 Connection types

0 100 200 300 Standard pump end = G 5

Q [IM.gpm]
400 Possible connection types:
Qmin ▪ Flanged connection
St=13 – DN 125
St=12
Alternative pump ends are
300 St=11 1000 possible.
St=10 The diameter of the pump set
Dmax depends on the pump
St=9 end.
H [ft]
St=8 ▪ DN 125 / PN10, PN16:
200 Dmax = 250 mm
St=7 Qmax
St=6 ▪ DN 125 / PN25, PN40:
H [m] 500 Dmax = 270 mm
St=5
▪ DN 125 / PN63:
100 St=4 Dmax = 295 mm
St=3
St=2
St=1
0 St=1a 0
0 20 Q [m³/h] 40 60 80
Q [l/s]
10 0 5 10 15 20 25 Dmax
30 G5

NPSH [m] NPSH [ft]

3% 3%

LG
20
5

10

LP
min. max.
50 LA

Eta [%]

0
0 20 Q [m³/h] 40 60 80
K3400.52.28/St3 SS/2

Operating range
Qmin = 15 m3/h
Qmax= end of stage curve
200

3400.55/01-EN

Ø14,5
A 275 350
Dimensions of UPA S 200 - 52 / ... [mm]

8 UPA S 200
 Water Supply
Submersible Borehole Pumps

Dimensions, weights and installation type depending on the motor [mm]

UPA S 200 - 52 / ... A LP LA LG4) DMax. Total weight Type of
installation

Horizontal
DOL Y-Δ Material variant 1.4408 /
1.4517

Vertical
[mm] [mm] [mm] [mm] [mm] [mm] [kg]

1 + UMA 150E 5/21 455 501 1180 275 202 206 76 ✘ ✘

2 + UMA 150E 13/21 645 625 1434 275 202 206 99 ✘ ✘
3 + UMA 150E 18/21 815 749 1648 275 202 206 118 ✘ ✘
4 + UMA 150E 22/21 985 873 1862 275 202 206 137 ✘ ✘
5 + UMA 150E 26/21 - 997 2091 275 202 206 157 ✘ -
6 + UMA 150E 37/22 - 1121 2395 275 202 206 184 ✘ -
7 + UMA 150E 37/22 - 1245 2519 275 202 206 194 ✘ -
7 + UMA 200D 37/21 - 1288 2428 275 202 206 236 ✘ -
8 + UMA 200D 45/21 - 1412 2642 275 202 206 262 ✘ -
9 + UMA 200D 55/21 - 1536 2876 275 202 206 291 ✘ -
10 + UMA 200D 55/21 - 1660 3000 275 202 206 301 ✘ -
11 + UMA 200D 65/21 - 1784 3254 275 202 206 334 ✘ -
12 + UMA 200D 65/21 - 1908 3378 275 202 206 344 ✘ -
13 + UMA 200D 75/21 - 2032 3592 275 202 206 369 ✘ -
11 + UMA 250D 85/21 - 1824 3243 275 230 230 423 ✘ -
12 + UMA 250D 85/21 - 1948 3367 275 230 230 433 ✘ -
13 + UMA 250D 85/21 - 2072 3491 275 230 230 442 ✘ -

Technical data
UPA S 200 - 52 / ... Pump Motor Motor lead5), flat
v ≥ 0,2 m/s (0,0

Number × cross-section of cores

Rated current
Rated power

Power factor
temperature
Q = 0 m3/h

Max. fluid

Efficiency
Head

m/s)

H0 PN T max IN ηM cos φ DOL Y-Δ

[m] [kW] [°C] [A] [%] [mm2] [mm2]
1 + UMA 150E 5/21 29,4 5,2 37 (32) 13,0 76,0 0,76 4 × 2,5 3/4 × 2,5
2 + UMA 150E 13/21 58,8 10,4 34 (29) 24,9 80,5 0,75 4 × 2,5 3/4 × 2,5
3 + UMA 150E 18/21 88,2 15,6 31 (25) 36,6 82,0 0,75 4×4 3/4 × 2,5
4 + UMA 150E 22/21 117,6 20,8 30 (24) 47,6 83,0 0,76 4×4 3/4 × 2,5
5 + UMA 150E 26/21 147,0 26,0 31 (25) 56,9 84,5 0,78 4×6 3/4 × 4
6 + UMA 150E 37/22 176,4 31,2 44 (38) 68,9 83,8 0,78 3/4 × 46) 3/4 × 4
7 + UMA 150E 37/22 205,8 36,4 43 (37) 79,6 83,5 0,79 3/4 × 46) 3/4 × 4
7 + UMA 200D 37/21 205,8 36,4 34 (28) 73,6 85,0 0,84 4 × 10 3/4 × 6
8 + UMA 200D 45/21 235,2 41,6 30 (25) 84,1 86,0 0,83 4 × 10 3/4 × 6
9 + UMA 200D 55/21 264,6 46,8 34 (28) 94,7 87,0 0,82 4 × 16 3/4 × 6
10 + UMA 200D 55/21 294,0 52,0 27 (21) 103,9 87,0 0,83 4 × 16 3/4 × 6
11 + UMA 200D 65/21 323,4 57,2 30 (23) 113,7 87,5 0,83 3/4 × 107) 3/4 × 10
12 + UMA 200D 65/21 352,8 62,4 30 (23) 124,0 87,5 0,83 3/4 × 107) 3/4 × 10
13 + UMA 200D 75/21 382,2 67,6 27 (20) 136,0 87,5 0,82 3/4 × 107) 3/4 × 10
11 + UMA 250D 85/21 323,4 57,2 30 (25) 120,1 87,0 0,79 3/4 × 107) 3/4 × 16
12 + UMA 250D 85/21 352,8 62,4 28 (23) 122,5 87,5 0,84 3/4 × 107) 3/4 × 16
13 + UMA 250D 85/21 382,2 67,6 27 (22) 132,8 87,5 0,84 3/4 × 107) 3/4 × 16
3400.55/01-EN

4) Length of pump end fitted as standard

5) 3/4 = 1 × 3-core + 1 × 4-core, offset by 90°
6) Parallel cables
7) Delta configuration in cable connector or control cabinet

UPA S 200 9
 Water Supply
Submersible Borehole Pumps

UPA S 200 - 75 / ..., number of stages 1 - 12

0 100 200 300 400 500 Connection types

Q [US.gpm]
0 100 Q [IM.gpm] 200 300 400 Standard pump end = G 5
Possible connection types:
Qmin
▪ Flanged connection
St=12
300 1000 – DN 125
St=11
St=10 Alternative pump ends are
possible.
St=9
H [ft] The diameter of the pump set
Dmax depends on the pump
St=8 end.
200
St=7 ▪ DN 125 / PN10, PN16:
Dmax = 250 mm
H [m] St=6 Qmax 500
▪ DN 125 / PN25, PN40:
St=5 Dmax = 270 mm
100 St=4 ▪ DN 125 / PN63:
Dmax = 295 mm
St=3

St=2
St=1
St=1a
0 0
0 20 Q [m³/h] 40 60 80 100 120
0 10 Q [l/s] 20 30 Dmax
35
10 G5

NPSH [ft]
3%
NPSH [m]

LG
3%
20
5

10

LP
St=3
St=1
St=2
St=4
St=5
St=6
St=7
St=8
St=9
max.
min.
50 LA

Eta [%]

0
0 20 Q [m³/h] 40 60 80 100 120
K3400.52.29/St3 SS/2

Operating range
Qmin = 15 m3/h
Qmax= end of stage curve
200

3400.55/01-EN

Ø14,5
A 275 350
Dimensions of UPA S 200 - 75 / ... [mm]

10 UPA S 200
 Water Supply
Submersible Borehole Pumps

Dimensions, weights and installation type depending on the motor [mm]

UPA S 200 - 75 /... A LP LA LG8) DMax. Total weight Type of
installation

Horizontal
DOL Y-Δ Material variant 1.4408 /
1.4517

Vertical
[mm] [mm] [mm] [mm] [mm] [mm] [kg]

1 + UMA 150E 7/21 470 504 1203 275 202 206 78 ✘ ✘

2 + UMA 150E 13/21 650 631 1440 275 202 206 98 ✘ ✘
3 + UMA 150E 18/21 825 758 1657 275 202 206 116 ✘ ✘
4 + UMA 150E 26/21 1045 885 1979 275 206 206 146 ✘ ✘
5 + UMA 150E 30/21 - 1012 2206 275 202 206 165 ✘ -
6 + UMA 150E 37/22 - 1139 2413 275 202 206 185 ✘ -
6 + UMA 200D 37/21 - 1182 2322 275 205 206 224 ✘ -
7 + UMA 200D 45/21 - 1309 2539 275 205 206 249 ✘ -
8 + UMA 200D 55/21 - 1436 2776 275 205 206 279 ✘ -
9 + UMA 200D 55/21 - 1563 2903 275 205 206 288 ✘ -
10 + UMA 200D 65/21 - 1690 3160 275 205 206 321 ✘ -
11 + UMA 200D 65/21 - 1817 3287 275 205 206 330 ✘ -
12 + UMA 200D 75/21 - 1944 3504 275 205 208 356 ✘ -
10 + UMA 250D 85/21 - 1730 3149 275 230 230 438 ✘ -
11 + UMA 250D 85/21 - 1857 3276 275 230 230 447 ✘ -
12 + UMA 250D 85/21 - 1984 3403 275 230 230 457 ✘ -

Technical data
UPA S 200 - 75 /... Pump Motor Motor lead9), flat
v ≥ 0,2 m/s (0,0

Number × cross-section of cores

Rated current
Rated power

Power factor
temperature
Q = 0 m3/h

Max. fluid

Efficiency
Head

m/s)

H0 PN T max IN ηM cos φ DOL Y-Δ

[m] [kW] [°C] [A] [%] [mm2] [mm2]
1 + UMA 150E 7/21 28,0 5,9 38 (34) 14,7 77,2 0,75 4 × 2,5 3/4 × 2,5
2 + UMA 150E 13/21 56,0 11,8 34 (29) 27,9 80,2 0,76 4 × 2,5 3/4 × 2,5
3 + UMA 150E 18/21 84,0 17,7 31 (25) 41,1 81,7 0,76 4×4 3/4 × 2,5
4 + UMA 150E 26/21 112,0 23,6 31 (25) 52,2 84,7 0,77 4×6 3/4 × 4
5 + UMA 150E 30/21 140,0 29,5 31 (25) 65,8 84,0 0,77 4×6 3/4 × 4
6 + UMA 150E 37/22 168,0 35,4 43 (37) 79,2 83,8 0,77 3/4 × 410) 3/4 × 4
6 + UMA 200D 37/21 196,0 35,4 34 (28) 73,1 85,2 0,82 4 × 10 3/4 × 6
7 + UMA 200D 45/21 224,0 41,3 30 (25) 83,5 86,0 0,83 4 × 10 3/4 × 6
8 + UMA 200D 55/21 252,0 47,2 34 (28) 95,5 87,0 0,82 4 × 16 3/4 × 6
9 + UMA 200D 55/21 280,0 53,1 27 (21) 107,4 87,0 0,82 4 × 16 3/4 × 6
10 + UMA 200D 65/21 308,0 59,0 30 (23) 117,8 87,1 0,83 3/4 × 1011) 3/4 × 10
11 + UMA 200D 65/21 336,0 64,9 30 (23) 127,5 87,5 0,84 3/4 × 1011) 3/4 × 10
12 + UMA 200D 75/21 364,0 70,8 27 (20) 142,4 87,5 0,82 3/4 × 1011) 3/4 × 10
10 + UMA 250D 85/21 308,0 59,0 30 (25) 119,4 87,0 0,82 3/4 × 1011) 3/4 × 16
11 + UMA 250D 85/21 336,0 64,9 28 (23) 131,0 87,2 0,82 3/4 × 1011) 3/4 × 16
12 + UMA 250D 85/21 364,0 70,8 27 (22) 142,4 87,5 0,82 3/4 × 1011) 3/4 × 16
3400.55/01-EN

8) Length of pump end fitted as standard

9) 3/4 = 1 × 3-core + 1 × 4-core, offset by 90°
10) Parallel cables
11) Delta configuration in cable connector or control cabinet

UPA S 200 11
 Water Supply
Submersible Borehole Pumps

UPA S 200 - 100 / ..., number of stages 1 - 10

0 200 Connection types

Q [US.gpm] 400 600
0 200 400 600 Standard pump end = G 5
Q [IM.gpm]
Possible connection types:
Qmin ▪ Flanged connection
250 St=10 800 – DN 125
St=9
Alternative pump ends are
200 St=8 possible.
The diameter of the pump set
600 Dmax depends on the pump
St=7
end.
150 St=6 ▪ DN 125 / PN10, PN16:
Dmax = 250 mm
St=5 400
▪ DN 125 / PN25, PN40:
100 St=4 Qmax Dmax = 270 mm
H [ft]
▪ DN 125 / PN63:
H [m] St=3 Dmax = 295 mm
200
50 St=2

St=1
St=1a
0 0
0 20 40 Q [m³/h]
60 80 100 120 140 160
0 10 Q [l/s] 20 30 40 Dmax
35
10 G5

NPSH [ft]
3%
NPSH [m]

LG
3%
20
5

10

LP
50 min. St=2
St=3
St=4
St=5
St=6
St=7
St=8
St=9
max. LA

Eta [%]

0
0 20 40 Q [m³/h]
60 80 100 120 140 160
K3400.52.30/St3 SS/3

Operating range
Qmin = 15 m3/h
Qmax= end of stage curve
200

3400.55/01-EN

Ø14,5
A 275 350
Dimensions of UPA S 200 - 100 / ... [mm]

12 UPA S 200
 Water Supply
Submersible Borehole Pumps

Dimensions, weights and installation type depending on the motor [mm]

UPA S 200 - 100 /... A LP LA LG12) DMax. Total weight Type of
installation

Horizontal
DOL Y-Δ Material variant 1.4408 /
1.4517

Vertical
[mm] [mm] [mm] [mm] [mm] [mm] [kg]

1 + UMA 150E 9/21 492 512 1241 275 202 206 80 ✘ ✘

2 + UMA 150E 18/21 712 647 1546 275 202 206 107 ✘ ✘
3 + UMA 150E 26/21 944 782 1876 275 202 206 137 ✘ ✘
4 + UMA 150E 37/22 - 917 2191 275 202 206 164 ✘ -
4 + UMA 200D 37/21 1145 960 2100 275 202 206 206 ✘ ✘
5 + UMA 200D 45/21 - 1095 2325 275 202 206 231 ✘ -
6 + UMA 200D 55/21 - 1230 2570 275 202 206 261 ✘ -
7 + UMA 200D 55/21 - 1365 2705 275 202 206 271 ✘ -
8 + UMA 200D 65/21 - 1500 2970 275 202 206 304 ✘ -
9 + UMA 200D 75/21 - 1635 3195 275 202 206 329 ✘ -
10 + UMA 200D 90/21 - 1770 3510 275 202 206 371 ✘ -

Technical data
UPA S 200 - 100 /... Pump Motor Motor lead13), flat
v ≥ 0,2 m/s (0,0

Number × cross-section of cores

Rated current
Rated power

Power factor
temperature
Q = 0 m3/h

Max. fluid

Efficiency
Head

m/s)

H0 PN T max IN ηM cos φ DOL Y-Δ

[m] [kW] [°C] [A] [%] [mm2] [mm2]
1 + UMA 150E 9/21 28,0 8,2 34 (30) 18,7 78,3 0,77 4 × 2,5 3/4 × 2,5
2 + UMA 150E 18/21 55,6 16,3 31 (25) 37,8 81,9 0,76 4 × 4,0 3/4 × 2,5
3 + UMA 150E 26/21 83,4 24,5 31 (25) 55,6 84,7 0,75 4 × 6,0 3/4 × 4,0
4 + UMA 150E 37/22 105,9 32,3 43 (37) 73,0 83,7 0,77 3/4 × 414) 3/4 × 4,0
4 + UMA 200D 37/21 105,9 32,3 34 (28) 66,6 85,3 0,82 4 × 10,0 3/4 × 6,0
5 + UMA 200D 45/21 139,0 40,8 30 (25) 83,5 86,0 0,82 4 × 10,0 3/4 × 6,0
6 + UMA 200D 55/21 166,8 49,0 34 (28) 99,1 87,0 0,82 4 × 16,0 3/4 × 6,0
7 + UMA 200D 55/21 194,6 57,1 27 (21) 115,4 87,0 0,82 4 × 16,0 3/4 × 6,0
8 + UMA 200D 65/21 222,4 65,3 30 (23) 129,7 87,5 0,83 3/4 × 1015) 3/4 × 10
9 + UMA 200D 75/21 250,2 73,4 27 (20) 149,6 87,5 0,81 3/4 × 1015) 3/4 × 10
10 + UMA 200D 90/21 278,0 81,6 27 (20) 167,3 88,0 0,80 3/4 × 1615) 3/4 × 16
3400.55/01-EN

12) Length of pump end fitted as standard

13) 3/4 = 1 × 3-core + 1 × 4-core, offset by 90°
14) Parallel cables
15) Delta configuration in cable connector or control cabinet

UPA S 200 13
 Water Supply
Submersible Borehole Pumps

UPA S 200 - 135 / ..., number of stages 1 - 12

0 200 Q [US.gpm] 400 600 800 Connection types

Standard pump end = G 5
300 0 200 Q [IM.gpm] 400 600 800
Possible connection types:
Qmin ▪ Flanged connection
St=12
250 St=11 – DN 125
800
St=10 Alternative pump ends are
possible.
200 St=9 The diameter of the pump set
St=8 600 Dmax depends on the pump
end.
St=7 ▪ DN 125 / PN10, PN16:
150
St=6
Dmax = 250 mm
400 ▪ DN 125 / PN25, PN40:
St=5 Dmax = 270 mm
100
St=4
H [ft]
▪ DN 125 / PN63:
H [m] Qmax Dmax = 295 mm
St=3 200
50
St=2
St=1
St=1a
0 0
0 50 Q [m³/h] 100 150 200
0 20 Q [l/s] 40 60 Dmax
28 G5
8
NPSH [ft]
NPSH [m] 3%
3%

LG
6 20

14
4

LP
100

Eta [%]

50
LA

min. St=3
St=4
St=5
St=6
max.

0
0 50 Q [m³/h] 100 150 200
K3400.52.31/St3 SS/2

Operating range
Qmin = 15 m3/h
Qmax= end of stage curve
200

3400.55/01-EN

Ø14,5
A 275 350
Dimensions of UPA S 200 - 135 / ... [mm]

14 UPA S 200
 Water Supply
Submersible Borehole Pumps

Dimensions, weights and installation type depending on the motor [mm]

UPA S 200 - 135 /... A LP LA LG16) DMax. Total weight Type of
installation

Horizontal
DOL Y-Δ Material variant 1.4408 /
1.4517

Vertical
[mm] [mm] [mm] [mm] [mm] [mm] [kg]

1 + UMA 150E 9/21 497 517 1246 275 202 206 80 ✘ ✘

2 + UMA 150E 18/21 744 657 1556 275 202 206 106 ✘ ✘
3 + UMA 150E 26/21 959 797 1891 275 202 206 135 ✘ ✘
4 + UMA 150E 37/22 - 937 2211 275 202 206 161 ✘ -
4 + UMA 200D 37/21 1165 980 2120 275 202 206 203 ✘ ✘
5 + UMA 200D 45/21 - 1120 2350 275 202 206 229 ✘ -
6 + UMA 200D 55/21 - 1260 2600 275 202 206 258 ✘ -
7 + UMA 200D 55/21 - 1400 2740 275 202 206 267 ✘ -
8 + UMA 200D 65/21 - 1540 3010 275 202 206 299 ✘ -
9 + UMA 200D 75/21 - 1680 3240 275 202 206 324 ✘ -
10 + UMA 200D 90/21 - 1820 3560 275 202 206 366 ✘ -
11 + UMA 200D 90/21 - 1960 3700 275 202 206 375 ✘ -
11 + UMA 250D 85/21 - 2000 3419 275 230 230 416 ✘ -
12 + UMA 250D 110/21 - 2140 3669 275 230 230 462 ✘ -

Technical data
UPA S 200 - 135 /... Pump Motor Motor lead17), flat
v ≥ 0,2 m/s (0,0

Number × cross-section of cores

Rated current
Rated power

Power factor
temperature
Q = 0 m3/h

Max. fluid

Efficiency
Head

m/s)

H0 PN T max IN ηM cos φ DOL Y-Δ

[m] [kW] [°C] [A] [%] [mm2] [mm2]
1 + UMA 150E 9/21 25,0 8,4 32 (27) 19,0 78,5 0,74 4 × 2,5 3/4 × 2,5
2 + UMA 150E 18/21 50,5 16,3 30 (24) 38,3 81,9 0,75 4×4 3/4 × 2,5
3 + UMA 150E 26/21 75,5 24,5 35 (29) 54,9 84,8 0,76 4×6 3/4 × 4
4 + UMA 150E 37/22 100,0 32,6 42 (36) 73,5 83,7 0,75 3/4 × 418) 3/4 × 4
4 + UMA 200D 37/21 100,1 32,6 34 (28) 67,4 85,2 0,82 4 × 10 3/4 × 6
5 + UMA 200D 45/21 125,4 40,8 30 (25) 83,4 86,0 0,82 4 × 10 3/4 × 6
6 + UMA 200D 55/21 150,5 48,9 32 (27) 97,7 87,0 0,83 4 × 16 3/4 × 6
7 + UMA 200D 55/21 175,5 57,1 27 (21) 114,0 87,0 0,83 4 × 16 3/4 × 6
8 + UMA 200D 65/21 200,2 65,0 30 (23) 129,2 87,5 0,83 3/4 × 1019) 3/4 × 10
9 + UMA 200D 75/21 225,4 73,4 27 (20) 151,2 87,5 0,80 3/4 × 1019) 3/4 × 10
10 + UMA 200D 90/21 250,5 81,5 29 (23) 167,1 88,0 0,80 3/4 × 1619) 3/4 × 16
11 + UMA 200D 90/21 275,5 89,7 27 (20) 183,8 88,0 0,80 3/4 × 1619) 3/4 × 16
11 + UMA 250D 85/21 275,5 89,7 28 (22) 172,1 87,5 0,86 3/4 × 1019) 3/4 × 16
12 + UMA 250D 110/21 300,5 97,8 26 (19) 194,1 88,7 0,82 3/4 × 1619) 3/4 × 25
3400.55/01-EN

16) Length of pump end fitted as standard

17) 3/4 = 1 × 3-core + 1 × 4-core, offset by 90°
18) Parallel cables
19) Delta configuration in cable connector or control cabinet

UPA S 200 15
 Water Supply
Submersible Borehole Pumps

Scope of supply
Depending on the model, the following items are included in
the scope of supply:
▪ Pump set with motor lead
▪ Back-up name plate
Optional:
▪ Output filter
▪ Extension cable optional: connected or supplied but not
fitted
▪ Electrical protection equipment
▪ Frequency inverter for speed control of one pump
▪ Pedestals
▪ Cable clips
▪ Cable connector
▪ Cooling shroud, suction shroud or pressure shroud
▪ Automatic control units
▪ Temperature monitoring
▪ Supporting clamps and mounting clamps

3400.55/01-EN

16 UPA S 200
 Water Supply
Submersible Borehole Pumps

Related Documents
List of components

UPA S 200, standard design

901.01
751

756
759
75-6

58-1
752.12

752.11
81-39

900.02

825
108.01
922
902
52-4
920.01

232

540

108.02
412.01

502

211

901.02

920.02 849

143 904.01
3400.55/01-EN

412.02
106

Fig. 2: UPA S 200 with connection for UMA / UMA-S 150E motors

Related Documents 17
 Water Supply
Submersible Borehole Pumps

211
940

901.02

904.02

920.02

849

143
904.01

412.02
106
901.03

920.03

Fig. 3: UPA S 200 with connection for UMA / UMA-S 200 motors

3400.55/01-EN

18 Related Documents
 Water Supply
Submersible Borehole Pumps

940 211

901.02
904.02

920.02

904.01

143 849

901.03
106
920.03

Fig. 4: UPA S 200 with connection for UMA 250D motor

901.01

71-12

902

920.01

Fig. 5: Connection types

3400.55/01-EN

Related Documents 19
 Water Supply
Submersible Borehole Pumps

900.01

143

106
Fig. 6: Screen for material variant C2

List of components for UPA S 200, standard design

UMA/UMA-S 150E
Quantity Part No. Description Scope of supply Recommended in

UMA/UMA-S 200
addition:

UMA 250D

1 106 Suction casing ✔ ✔ ✔ Incl. 412.01, 502 143, 900.01, 901.02

1 108.0120) Stage casing ✔ ✔ ✔ Incl. 412.01, 540, 902 58-1
(last stage)
1 per stage -1 108.02 Stage casing ✔ ✔ ✔ Incl. 412.01, 502, 540, 902 -
1 14320) Suction strainer ✔ ✔ ✔ Incl. 920.02 900.01, 901.02
1 211 Pump shaft ✔ - - Incl. 412.02, 849, 904.01 -
- ✔ ✔ - 412.02, 940
1 per stage 232 Clockwise impeller ✔ ✔ ✔ - 52-4, 922
1 per stage +1 412.0120) O-ring ✔ ✔ ✔ - -
1 412.0220) O-ring ✔ ✔ - - -
1 per stage 52-4 Locking sleeve ✔ ✔ ✔ - 922
1 58-120) Protecting plug ✔ ✔ ✔ - -
1 per stage 50220) Casing wear ring ✔ ✔ ✔ - -
20)
1 per stage 540 Bush ✔ ✔ ✔ - -
1 71-12 Connection nozzle ✔ ✔ ✔ Incl. 901.01, 902 920.01
1 75-6 Valve disc guide ✔ ✔ ✔ - -
1 751 Valve body ✔ ✔ ✔ Incl. 75-6, 752.11/.12, 756, 920.01
759, 901.01, 902
1 752.11 Valve seat ✔ ✔ ✔ - 752.12
1 752.12 Valve seat ✔ ✔ ✔ - 752.11
1 756 Valve spring ✔ ✔ ✔ - -
1 759 Valve disc ✔ ✔ ✔ - 752.12
2 per cable 81-39 Clamp ✔ ✔ ✔
1 per cable 825 Cable guard ✔ ✔ ✔ - 81-39, 900.02
1 849 Sleeve coupling ✔ - - Incl. 211, 904.01 412.02
3400.55/01-EN

- ✔ ✔ - 412.02, 904.01/.02, 940

3 900.0120)21) Screw ✔ ✔ ✔ - -
20)
4 per cable 900.02 Screw ✔ ✔ ✔ - -
2 901.01 Hexagon head bolt ✔ ✔ ✔ - -
3 901.0220)22) Hexagon head bolt ✔ ✔ ✔ - -
4 901.03 Hexagon head bolt - ✔ ✔ - -

20) Recommended spare part

21) Only for material variant C2
22) Only for material variant C3

20 Related Documents
 Water Supply
Submersible Borehole Pumps

UMA/UMA-S 150E
Quantity Part No. Description Scope of supply Recommended in

UMA/UMA-S 200
addition:

UMA 250D
(1 per stage +1) × 8 902 Stud ✔ ✔ ✔ - 920.01
1 904.0120) Grub screw ✔ ✔ - - -
2 Grub screw - - ✔ - -
2 904.0220) Grub screw - ✔ ✔ - -
(1 per stage +1) × 8 920.01 Nut ✔ ✔ ✔ - -
3 920.0220)22) Nut ✔ ✔ ✔ - -
4 920.03 Nut - ✔ ✔ - -
1 per stage 92223) Impeller nut ✔ ✔ ✔ - 52-4
1 94020) Key - ✔ ✔ - -
3400.55/01-EN

23) Special tool required for assembly

Related Documents 21
 Water Supply
Submersible Borehole Pumps

UPA S 200, special design

901.01
751

756
759
75-6

901.04 752.12

752.11
550
81-39

545 900.02

529 940.01

108.01 825

922
902
52-4
920.01
232

540

108.02
412.01

502

211

901.02

920.02 849

143 904.01

412.02
106
Fig. 7: UPA S 200 with connection for UMA / UMA-S 150E motors
3400.55/01-EN

22 Related Documents
 Water Supply
Submersible Borehole Pumps

211
940.02

901.02

904.02

920.02

849

143
904.01

412.02
106
901.03

920.03

Fig. 8: UPA S 200 with connection for UMA / UMA-S 200 motors
3400.55/01-EN

Related Documents 23
 Water Supply
Submersible Borehole Pumps

940.02 211

901.02
904.02

920.02

904.01

143 849

901.03
106
920.03

Fig. 9: UPA S 200 with connection for UMA 250D motor

901.01

71-12

902

920.01

Fig. 10: Connection types

3400.55/01-EN

24 Related Documents
 Water Supply
Submersible Borehole Pumps

900.01

143

106
Fig. 11: Screen for material variant C2

List of components for UPA S 200, special design

UMA/UMA-

UMA/UMA-
Quantity Part No. Description Scope of supply Recommended in

UMA 250D
S 150E addition:

S 200

1 106 Suction casing ✔ ✔ ✔ Incl. 412.01, 502 143, 900.01, 901.02

1 108.0124) Stage casing ✔ ✔ ✔ Incl. 412.01, 545, 902 -
(last stage)
1 per stage -1 108.02 Stage casing ✔ ✔ ✔ Incl. 412.01, 502, 540, -
902
1 14324) Suction strainer ✔ ✔ ✔ Incl. 920.02 900.01, 901.02
1 211 Pump shaft ✔ - - Incl. 412.02, 849, 904.01 550, 901.04, 940.01
- ✔ ✔ - 550, 901.04, 940.01/.02
1 per stage 232 Clockwise impeller ✔ ✔ ✔ - 52-4, 922
1 per stage +1 412.0124) O-ring ✔ ✔ ✔ - -
1 412.0224) O-ring ✔ ✔ - - -
1 per stage 52-4 Locking sleeve ✔ ✔ ✔ - 922
1 per stage 50224) Casing wear ring ✔ ✔ ✔ - -
1 52924) Bearing sleeve ✔ ✔ ✔ - 545
24)
1 per stage -1 540 Bush ✔ ✔ ✔ - -
1 54524) Bearing bush ✔ ✔ ✔ - 529
1 55024) Disc ✔ ✔ ✔ - -
1 71-12 Connection nozzle ✔ ✔ ✔ Incl. 901.01, 902 920.01
1 75-6 Valve disc guide ✔ ✔ ✔ - -
1 751 Valve body ✔ ✔ ✔ Incl. 75-6, 752.11/.12, 920.01
756, 759, 901.01, 902
1 752.11 Valve seat ✔ ✔ ✔ - 752.12
1 752.12 Valve seat ✔ ✔ ✔ - 752.11
1 756 Valve spring ✔ ✔ ✔ - -
1 759 Valve disc ✔ ✔ ✔ - 752.12
2 per cable 81-39 Clamp ✔ ✔ ✔ - 900.02
1 per cable 825 Cable guard ✔ ✔ ✔ - 81-39, 900.02
3400.55/01-EN

1 849 Sleeve coupling ✔ - - Incl. 211, 904.01 412.02, 940.01

- ✔ ✔ - 412.02,904.01/.02,
940.02
3 900.0124)25) Screw ✔ ✔ ✔ - -
4 per cable 900.0224) Screw ✔ ✔ ✔ - -
2 901.01 Hexagon head bolt ✔ ✔ ✔ - -

24) Recommended spare part

25) Only for material variant C2

Related Documents 25
 Water Supply
Submersible Borehole Pumps

UMA/UMA-

UMA/UMA-
Quantity Part No. Description Scope of supply Recommended in

UMA 250D
addition:

S 150E

S 200
3 901.0224)26) Hexagon head bolt ✔ ✔ ✔ - -
4 901.03 Hexagon head bolt - ✔ ✔ - -
1 901.0424) Hexagon head bolt ✔ ✔ ✔ - -
(1 per stage +1) × 8 902 Stud ✔ ✔ ✔ - 920.01
1 904.0124) Grub screw ✔ ✔ - - -
2 - - ✔ - -
2 904.0224) Grub screw - ✔ ✔ - -
(1 per stage +1) × 8 920.01 Nut ✔ ✔ ✔ - -
3 920.0224)26) Nut ✔ ✔ ✔ - -
4 920.03 Nut - ✔ ✔ - -
1 per stage 92227) Impeller nut ✔ ✔ ✔ - 52-4
1 940.0124) Key ✔ ✔ ✔ - -
1 940.0224) Key - ✔ ✔ - -

3400.55/01-EN

26) Only for material variant C3

27) Special tool required for assembly

26 Related Documents
 Water Supply
Submersible Borehole Pumps

Electrical accessories
Selection table
Description Mat. No. Weight
[kg]
Extension cable,
blue, rubber-sheathed cable for drinking water applications, maximum ambient temperatures +50 °C
G RD GWT - J, 4-core, round, with earth conductor 4 x 1,5 mm² 90068174 0,18
Values indicated per meter 4 x 2,5 mm² 90068175 0,259
4 x 4 mm² 90068176 0,356
4 x 6 mm² 90068177 0,475
4 x 10 mm² 90068178 0,837
4 x 16 mm² 90068179 1,22
4 x 25 mm² 90068180 1,77
4 x 35 mm² 90068181 2,304
4 x 50 mm² 90068182 3,185
4 x 70 mm² 90068183 4,364
G FL GWT - O, 3-core, flat, without earth conductor 3 x 1.5 mm² 90068148 0,11
Values indicated per meter 3 x 2.5 mm² 90068149 0,171
3 x 4 mm² 90068150 0,252
3 x 6 mm² 90068151 0,319
3 x 10 mm² 90068152 0,486
3 x 16 mm² 90068153 0,75
3 x 25 mm² 90068154 1,107
3 x 35 mm² 90068155 1,438
3 x 50 mm² 90068156 2,054
3 x 70 mm² 90068157 2,76
Shielded Hydrofirm (T) cable
S07BC4B - F 3 x 6 / 6 KON 01083423 -
S07BC4B - F 3 x 16 / 16 KON 01083424 -
S07BC4B - F 3 x 35 + 3G16 / 3 01083425 -
Cable connector, non-separable, including sealing compound, for connecting 1 extension cable to 1 or 2 motor leads
Size 28 for connection to:
1 motor lead Supplied but not fitted 95005106 0,5
Connected and sealed at the factory 90049385 0,5
Size 35 for connection to:
1 motor lead Supplied but not fitted 90049397 0,6
Connected and sealed at the factory 90049387 0,6
Size 43 for connection to:
1 motor lead Supplied but not fitted 90049399 0,8
Connected and sealed at the factory 90049389 0,8
2 motor leads Supplied but not fitted 90049400 0,8
Connected and sealed at the factory 90049390 0,8
Sizes 53 and 78 for connection On request
Cable clip for fastening the cable to the riser
Size 1 (rubber strap / plastic studs), 01088095 0,04
for up to 1 cable, flat, 3 x 6 mm2 or 4 x 6 mm2 and 1 cable, round, 4 x 6 mm2
Sizes 2 - 11 (metal strap/ screw band with tension screw / rubber cable protector), On request -
for larger cross-sections up to 70 mm2
Cable clips for pump sets in material variant B (special), C3 (duplex) on request.
Use 1 cable clip each per cable and per 3 m of riser
Dry running protection equipment (supply voltage 220 V / 240 V) for
3400.55/01-EN

Semi-automatic operation (1 relay, 1 pushbutton + 2 electrodes) 90009553 2

Fully automatic operation (1 relay + 3 electrodes) 90009554 2
Plus 1 control current cable, blue, 1 x 1.5 mm2 for each electrode; values indicated per metre 01096713 0,1
Pressure controller, insulating enclosure (membrane type), 1 to 8 bar, with pressure connection G 3/8 01151586 1
Pt100 temperature monitoring equipment for use in submersible motors to protect the windings from overheating. Comprising:
Pt100 temperature sensor with 10 m cable UMA 150E material variant C1, C2 01532593 1,1
4 x 0.5 mm2 for motor_ UMA 150E material variant C3 01532594 1,1
UMA 200D, UMA 250D material variant G, C2 90063006 1,1
UMA 200D, UMA 250D material variant C3 On request -

Related Documents 27
 Water Supply
Submersible Borehole Pumps

Description Mat. No. Weight

[kg]
Display / switchgear (supply voltage V = 110/220 V) 90064446 0,32
Control cable, blue, round 4 x 0.5 mm2 Per metre 01049403 0,08
Immersion electrodes
Set of electrodes: 3 electrodes made of stainless 40980055 0,3
steel
Set of electrodes: 1 electrode made of stainless 40980056 0,1
steel

Power cables Cable designs

Cable type Characteristic
Main applications Flat cable
▪ For use with drinking water applications 3 cores, flat
4 cores, flat
▪ Motor lead for submersible motors, cable laid under water
Round cable
▪ Extension cable for the motor lead, cable laid freely 1 core, round
exposed to air
4 cores, round

Operating data
Operating properties
Characteristic Value
Rated voltage VN [V] ≤ 1000
Ambient temperature T [°C] ≤ 50
Immersion depth IM [m] ≤ 500

Designation

Example:
ZN 1391 - G FL GWT -J 4G25 - Cu-Rubber
Designation key
Code Description
ZN Works standard
G Insulation, rubber
FL Type of power cable
FL Flat
RD Round
GWT Suitable for drinking water
J Information about earth conductor
J With earth conductor
O Without earth conductor
4G25 Number of cores
4G25 With earth conductor, 4-core, cross-section
25 mm2
3x25 Without earth conductor, 3-core, cross-
section 25 mm2
Cu-rubber Material

Design details
▪ 3-core or 4-core rubber-sheathed cable
3400.55/01-EN

Comprising:
– Stranded copper conductor
– Bare
– Core insulation and outer sheath made of a special
EPR-based rubber compound (ethylene propylene
rubber)
– Blue

28 Related Documents
 Water Supply
Submersible Borehole Pumps

Selection information

Permissible cable lengths for starting method: DOL

28)
Applies to 1 cable or 2 cables in parallel

Conditions:
▪ V = 400 V; ΔV = 3 %; T ≤ 30 °C; laid freely exposed to air and in contact with surfaces

400

300
Imax = 250 A 70 mm2

Imax = 202 A 50 mm2

200
Imax = 162 A 35 mm2

Imax = 131 A 25 mm2

Imax = 99 A 16 mm2
100
90
80 Imax = 74 A 10 mm2
70
60 Imax = 53 A 6,0 mm2
50
Imax = 41 A 4,0 mm2
40

Imax = 30 A 2,5 mm2
30
Imax = 23 A 1,5 mm2

20

IN
[A]

10
9
8
7
6
5

2
A B

1
10 20 30 40 50 60 70 80 100 L [m] 200 300 400 500

Example A Example B
IN = 68 A IN = 68 A
Cable design: 1 x 16 mm2 Cable design: 1 x 25 mm2
3400.55/01-EN

Cable length: L ≤ 105 m Cable length: L ≤ 165 m

28) For parallel cables the value is doubled to obtain the permissible length.

Related Documents 29
 Water Supply
Submersible Borehole Pumps

Permissible cable lengths for starting method: YΔ

Applies to 2 cables
Conditions:
▪ V = 400 V; ΔV = 3 %; T ≤ 30 °C; laid freely exposed to air and in contact with surfaces

Imax = 433 A 70 mm2

400 Imax = 350 A 50 mm2

300 Imax = 280 A 35 mm2

Imax = 227 A 25 mm2

200
Imax = 171 A 16 mm2

Imax = 128 A 10 mm2

100 Imax = 92 A 6,0 mm2

90
80 Imax = 71 A 4,0 mm2
70
60 Imax = 52 A 2,5 mm2
50
Imax = 40 A 1,5 mm2
40

30

20

IN
[A]

10
9
8
7
6
5

2
A B

1
10 20 30 40 50 60 70 80 100 L [m] 200 300 400 500

Example A Example B
IN = 27 A IN = 27 A
Cable design: 2 x 6.0 mm2 Cable design: 2 x 10 mm2
Cable length: L ≤ 145 m Cable length: L ≤ 235 m
3400.55/01-EN

30 Related Documents
 Water Supply
Submersible Borehole Pumps

Voltage drop in the extension cable Starting method YΔ (2 cables):

When calculating the required conductor cross-section q not
only IN, but also the voltage drop ΔV along the cable length L
2,1 × L × IN × cos φ
ΔU = [%]
(distance from motor to control unit) must be taken into q×U
account. Proper functioning of our submersible motors ▪
requires ΔV ≤ 3 % of the supply voltage V.
If ΔV > 3 %, a larger conductor cross-section must be used.
The voltage drop is calculated using the following equations: Power loss ΔP:

ΔU
Starting method DOL/autotransformer ΔP = [%]
(cos φ)2
▪ 1 cable: ▪

3,1 × L × IN × cos φ Key

ΔU = [%]
q×U Code Description
L Single cable length [m]
▪ 2 cables in parallel (II):
IN Rated current [A]:
1,55 × L × IN × cos φ cos φ Power factor at 4/4 load
ΔU = [%]
q×U q Conductor cross-section [mm2]
U Supply voltage [V]

Maximum permissible rated motor current

For ambient temperature t ≤ 30 °C

Starting method Used as ... Imax [A]

for the following conductor cross-sections [mm2]
1,5 2,5 4 6 10 16 25 35 50 70 95
DOL Motor lead 29 38 52 67 94 125 166 205 256 316 517
(1 cable or 2 Extension cable 23 30 41 53 74 99 131 162 202 250 409
cables in parallel)
YΔ Motor lead 50 66 90 116 163 217 288 355 443 547 895
(2 cables) Extension cable 40 52 71 92 128 171 227 280 350 433 708

Dimensions and weights

Selection table: dimensions [mm]
Core type Conductor cross-section [mm2]
1,5 2,5 4 6 10 16 25 35 50 70 95
Height 5,2 +1,0 6,1 +1,5 7,0 +2,0 7,6 +2,2 9,3 +2,2 11,2 +2,3 13,0 +2,5 14,6 +2,9 17,0 +3,0 19,3 +2,7 -
Width 11,0 +2,0 13,2 +2,3 15,5 +3,5 17,4 +3,6 21,5 +3,5 26,7 +4,3 31,6 +3,9 35,5 +5,0 42,1 +4,9 48,4 +3,6 -
Height 5,2 +1,0 6,1 +1,5 - 7,6 +2,2 9,3 +2,2 11,2 +2,3 13,0 +2,5 - - - -
Width 14,5 +2,7 17,5 +2,5 - 23,5 +3,0 29,0 +3,5 35,0 +2,4 41,5 +4,5 - - - -
Diameter 5,3 +1,1 - - - - - - 13,8 +3,6 16,0 +3,8 18,5 +3,6 21,9 +1,5
Diameter 10,0 +2,0 12,0 +1,9 13,9 +2,0 15,7 +2,1 21,1 +2,1 24,5 +4,3 29,7 +4,3 33,3 +5,5 39,0 +5,6 44,2 +5,8 -

Selection table: weight [kg/m]

Conductor cross-section [mm2]
Core
type

1,5 2,5 4 6 10 16 25 35 50 70 95
0,110 0,171 0,252 0,319 0,486 0,750 1,107 1,438 2,054 2,760 -
0,165 0,237 - 0,440 0,704 1,026 1,457 - - - -
0,051 - - - - - - 0,499 0,699 0,940 1,140
0,180 0,259 0,356 0,475 0,837 1,220 1,770 2,304 3,185 4,364 -
3400.55/01-EN

Related Documents 31
 Water Supply
Submersible Borehole Pumps

Cable connector

Application
For providing a sealed, water-tight connection between extension cables and motor leads of submersible motors.
▪ Ambient temperature: T ≤ + 50 °C
▪ Immersion depth: ≤ 500 m

Selection table
The table below only shows the cables on stock. Connectors for other cables on request.

Selection table
Motor Extension cable [mm2]
lead
[mm2] 1,5 2,5 4 6 10 16 25 35 50 70
Cable connector size

1,5 / 2,5 28 28 28 35 35 43 53 53 - -
4 - 35 35 35 35 43 53 53 - -
6 - - 35 35 35 43/29f 53/29f 53/29f - -
10 - - - 43 43/29f 43/29f 53/29f 53/29f - -
16 - - - - - 53 53 53 66 66
25 - - - - - - 66 66 66 66
35 - - - - - - - 66 66 66
50 - - - - - - - 66 66 66
70 - - - - - - - - - 66

1,5 / 2,5 28 28 28 35 35 43 53 53 - -
4 - 35 35 35 35 43 53 53 - -
6 - - 35 35 35 43 53 53 - -
10 - - - 43 43 43 53 53 - -
16 - - - - - 53 53 53 66 66
25 - - - - - - 66 66 66 66
+
or
+

1,5 28 28 28 35 35 - - - - -
2,5 35 35 35 35 35 - - - - -
4 - - 35 35 35 43 - - - -
6 - - - 43 43 43 53 53 66 66
10 - - - 66 66 66 66 66 66 66
16 - - - - - 66 66 66 66 66
25 - - - - - - 78 78 78 -

1,5 / 2,5 / 4 28 28 28 28 35 43 - - - -
6 28 28 28 28 35 43 53 53 - -
10 - - 35 35 35 43 53 53 - -
16 - - - - 43 43 53 53 66 66
25 - - - - - 53 53 53 66 78
35 - - - - - - - 53 66 78
3400.55/01-EN

50 - - - - - - - - 66 78
70 - - - - - - - - - 78

35 - - - - - - - 35 - -
50 - - - - - - - - 35 -
70 - - - - - - - - - 35

32 Related Documents
 Water Supply
Submersible Borehole Pumps

Key
Cable symbols Description Cable designation
1-core, round G RD GWT - O 1 G
4-core, round G RD GWT - J 4 G

3-core, flat G FL GWT - O 3x ...

4-core, flat G FL GWT - J 4G ...
3400.55/01-EN

Related Documents 33
 Water Supply
Submersible Borehole Pumps

Cable clips

Applications
▪ Securing cables at the riser / discharge pipe.
▪ Suitable for use in normal or slightly aggressive water.
▪ Versions for use in more aggressive water (e.g. seawater) on request.

Selection table
Cable Weight Required strap length L [mm] per cable clip for the following risers

Cable clip

G 1 1/4 /

G 1 1/2 /

G 2 / DN

G 3 / DN

G 4 / DN

G 5 / DN

G 6 / DN

G 8 / DN
Type Number x ∅ of cores

DN 175

DN 250

DN 300

DN 350

DN 400
DN 32

DN 40

DN 65
[mm] size [kg]

100

125

150

200
50

80
Flat 3 x 1.5 4 x 1.5 1 0,01 270 280 320 360 400 450 500 600 - - - - - -
to to
3 x 6,0 4 x 6.0
3 x 10 4 x 10 11 0,01 - - 350 400 450 550 650 800 950 1100 1300 1500 1700 1900
to to
3 x 70 4 x 70
Round 3 x 1.5 4 x 1.5 1 0,01 270 280 320 360 400 450 500 600 - - - - - -
to to
3 x 6.0 4 x 6.0
3 x 10 4 x 10 2 0,08 - - 350 400 450 550 650 800 950 1100 1300 1500 1700 1900
3 x 16 4 x 16 3a 0,19 - - 350 400 450 550 650 800 950 1100 1300 1500 1700 1900
3 x 25
3 x 35 4 x 25 3 0,19 - - - 450 500 600 700 850 1000 1150 1350 1550 1750 1950
3 x 50 4 x 35
3 x 70 4 x 50 3b 0,19 - - - 450 500 600 700 850 1000 1150 1350 1550 1750 1950
3 x 95 4 x 70 4 0,55 - - - - - 650 750 900 1050 1200 1400 1600 1800 2000
4 x 95
3 cables 1 x 50 7 0,6 - - - - - 700 800 950 1100 1250 1450 1650 1850 2050
3 cables 1 x 70 8 0,6 - - - - 700 800 950 1100 1250 1450 1650 1850 2050
3 cables 1 x 95 6 0,6 - - - - 700 800 950 1100 1250 1450 1650 1850 2050
3 cables 1 x 120 9 0,6 - - - - 700 800 950 1100 1250 1450 1650 1850 2050
3 cables 1 x 150

Cable clip sizes

Size 1 Sizes 2, 3, 3a, 3b, 4 Sizes 6 to 9 Size 11

2
1
1 3
2
4
3
5
4

1 = cable 1 = screw band with tension screw (re-usable)

2 = riser 2 = cable guard
3 = plastic stud 3 = cable
4 = rubber strap 4 = metal strap
5 = riser
3400.55/01-EN

34 Related Documents
 Water Supply
Submersible Borehole Pumps

Flow velocity past the motor

Application
▪ Required motor cooling
Flow velocity past the motor
v = 0 m/s
The flow velocity past the motor is not defined. The heat is dissipated freely. This heat dissipation must not be influenced or
hindered by any structures, and a supply of fresh water must be provided at all times.
▪ Example: pump set freely suspended in a vertical position inside a large tank
Flow velocity past the motor
v > 0.2 m/s
v > 0.5 m/s
The flow velocity past the motor is defined for the installation conditions, see table below. Decisive factors are the inside well
diameter or the inside shroud diameter, the operating data and the outside dimensions of the pump.
▪ Example: pump set installed in a vertical position above the screen/filter in a well; values in accordance with the table below.
▪ Example: pump set installed in a horizontal position in a tank, fitted with a cooling shroud, or pump set installed in a vertical
position in a pump sump, fitted with a cooling shroud; values in accordance with the table below

Maximum permissible inside diameter of the well or shroud

Flow rate Flow Inside diameter of the well or shroud [mm]

velocity
Q [m³/h] v [m/s] For For For For For
UMA 150D UMA 200D UMA 250D UMA 300D 14D
UMA 150E UMA-S 200D
UMA-S 150E
15 ≥ 0,2 ≤ 215 - - - -
≥ 0,5 ≤ 175 - - - -
25 ≥ 0,2 ≤ 255 - - - -
≥ 0,5 ≤ 195 - - - -
50 ≥ 0,2 ≤ 330 ≤ 350 - - -
≥ 0,5 ≤ 235 ≤ 265 - - -
75 ≥ 0,2 ≤ 390 ≤ 410 ≤ 430 - -
≥ 0,5 ≤ 270 ≤ 300 ≤ 330 - -
100 ≥ 0,2 ≤ 445 ≤ 460 ≤ 480 - -
≥ 0,5 ≤ 300 ≤ 325 ≤ 355 - -
125 ≥ 0,2 ≤ 490 ≤ 510 ≤ 525 - -
≥ 0,5 ≤ 330 ≤ 350 ≤ 380 - -
150 ≥ 0,2 ≤ 535 ≤ 550 ≤ 565 ≤ 590 -
≥ 0,5 ≤ 355 ≤ 380 ≤ 400 ≤ 430 -
175 ≥ 0,2 ≤ 575 ≤ 590 ≤ 605 ≤ 625 -
≥ 0,5 ≤ 380 ≤ 400 ≤ 420 ≤ 450 -
200 ≥ 0,2 ≤ 615 ≤ 625 ≤ 640 ≤ 660 ≤ 690
≥ 0,5 ≤ 405 ≤ 420 ≤ 445 ≤ 470 ≤ 510
250 ≥ 0,2 ≤ 680 ≤ 690 ≤ 705 ≤ 725 ≤ 750
≥ 0,5 ≤ 445 ≤ 460 ≤ 480 ≤ 505 ≤ 540
300 ≥ 0,2 ≤ 745 ≤ 755 ≤ 765 ≤ 780 ≤ 800
≥ 0,5 ≤ 485 ≤ 500 ≤ 515 ≤ 540 ≤ 570
350 ≥ 0,2 - ≤ 810 ≤ 820 ≤ 835 ≤ 860
≥ 0,5 - ≤ 530 ≤ 550 ≤ 570 ≤ 600
400 ≥ 0,2 - ≤ 865 ≤ 875 ≤ 890 ≤ 910
≥ 0,5 - ≤ 565 ≤ 580 ≤ 605 ≤ 630
3400.55/01-EN

500 ≥ 0,2 - ≤ 960 ≤ 970 ≤ 985 ≤ 1000

≥ 0,5 - ≤ 625 ≤ 640 ≤ 660 ≤ 690
600 ≥ 0,2 - ≤ 1050 ≤ 1055 ≤ 1070 ≤ 1090
≥ 0,5 - ≤ 680 ≤ 695 ≤ 710 ≤ 740
800 ≥ 0,2 - ≤ 1205 ≤ 1215 ≤ 1225 ≤ 1240
≥ 0,5 - ≤ 775 ≤ 790 ≤ 805 ≤ 830
1000 ≥ 0,2 - ≤ 1345 ≤ 1350 ≤ 1360 ≤ 1370
≥ 0,5 - ≤ 865 ≤ 875 ≤ 890 ≤ 910
1200 ≥ 0,2 - - - ≤ 1485 ≤ 1500
≥ 0,5 - - - ≤ 965 ≤ 980

Related Documents 35
 Water Supply
Submersible Borehole Pumps

Flow rate Flow Inside diameter of the well or shroud [mm]

velocity
Q [m³/h] v [m/s] For For For For For
UMA 150D UMA 200D UMA 250D UMA 300D 14D
UMA 150E UMA-S 200D
UMA-S 150E
1400 ≥ 0,2 - - - ≤ 1600 ≤ 1610
≥ 0,5 - - - ≤ 1030 ≤ 1050
1600 ≥ 0,2 - - - ≤ 1705 ≤ 1720
≥ 0,5 - - - ≤ 1100 ≤ 1120
1800 ≥ 0,2 - - - ≤ 1805 ≤ 1820
≥ 0,5 - - - ≤ 1165 ≤ 1180
2000 ≥ 0,2 - - - ≤ 1900 ≤ 1910
≥ 0,5 - - - ≤ 1225 ≤ 1240

3400.55/01-EN

36 Related Documents
 27/03/2020
3400.55/01-EN

KSB SE & Co. KGaA

Johann-Klein-Straße 9 • 67227 Frankenthal (Germany)
Tel. +49 6233 86-0
www.ksb.com