Professional Documents
Culture Documents
Welding Procedure Specifications (WPS) : NMDC Nagarnar 2 MTPA Pellet Plant, Jagdalpur - 494001
Welding Procedure Specifications (WPS) : NMDC Nagarnar 2 MTPA Pellet Plant, Jagdalpur - 494001
Welding Procedure Specification No. WPS/01 Date: Qualified to: IS 7307 Part-I
Supporting PQR No.(s) PQR /01 Dated
Thickness Range:
Base Metal: Groove: 5.0 to 200.00 mm Fillet: All
Maximum Pass Thickness ≤ ½ in. (13mm) Yes
T Limits : Not Applicable
FILLER METALS (QW- 404) SMAW
Spec. No. (SFA) 5.1
F.NO. 4
A.NO. 1
Weld Metal
Thickness Range
Fillet All
Flux NA
Other : Nil
Position(s) of Fillet : All
Other :Nil
Other Nil
Electrical Characteristics (QW 409)
Filler Metal Current Volts Travel Speed Other (e.g., Remarks,
Weld Classification Diameter Type and Amp (Range) (Range) mm Comments, Hot wire
Pass(es) Process (mm) Polarity (Range) Addition, Technique, Torch
Angle etc.)
All SMAW E7018 3.15MM DCEP 70-140 10-14 As Required
Passes SMAW E7018 4.0MM DCEP 70-90 12-14 As Required
SMAW E7018 5.0MM DCEP 80-100 12-16 As Required
Nil
Other: 1.This Procedure Shall be used for Tacking, Welding & Weld Repair.