Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 53 views

    DT-3352 Multímetro

    Uploaded by

    Cassiano Fantin
    This document summarizes the specifications of the DT-3352 1500Amp True RMS AC/DC Clamp Power Meter manufactured by CEM. The meter can measure AC/DC current up to 1500A, AC/DC voltage up to 1000V, resistance, capacitance, frequency, duty cycle, temperature, power, and more. It has a dual LCD display, data hold, peak hold, non-contact voltage detection, and can operate from 5°C to 40°C. The meter is tested and calibrated to provide accurate and reliable measurements.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    DT-3352 Multímetro

    Uploaded by

    Cassiano Fantin
    53 views3 pages
    This document summarizes the specifications of the DT-3352 1500Amp True RMS AC/DC Clamp Power Meter manufactured by CEM. The meter can measure AC/DC current up to 1500A, AC/DC voltage up to 1000V, resistance, capacitance, frequency, duty cycle, temperature, power, and more. It has a dual LCD display, data hold, peak hold, non-contact voltage detection, and can operate from 5°C to 40°C. The meter is tested and calibrated to provide accurate and reliable measurements.

    Original Title

    DT-3352 multímetro

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes the specifications of the DT-3352 1500Amp True RMS AC/DC Clamp Power Meter manufactured by CEM. The meter can measure AC/DC current up to 1500A, AC/DC voltage up to 1000V, resistance, capacitance, frequency, duty cycle, temperature, power, and more. It has a dual LCD display, data hold, peak hold, non-contact voltage detection, and can operate from 5°C to 40°C. The meter is tested and calibrated to provide accurate and reliable measurements.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    53 views3 pages

    DT-3352 Multímetro

    Uploaded by

    Cassiano Fantin
    This document summarizes the specifications of the DT-3352 1500Amp True RMS AC/DC Clamp Power Meter manufactured by CEM. The meter can measure AC/DC current up to 1500A, AC/DC voltage up to 1000V, resistance, capacitance, frequency, duty cycle, temperature, power, and more. It has a dual LCD display, data hold, peak hold, non-contact voltage detection, and can operate from 5°C to 40°C. The meter is tested and calibrated to provide accurate and reliable measurements.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 3

    CEM

    This meter measures AC Current, DC


    Current, AC/DC Voltage, Resistance,
    Capacitance, Frequency, Diode Test, Duty
    Cycle and Continuity. The molded case is
    designed for heavy duty use. This meter
    is shipped fully tested and calibrated and,
    with proper use, will provide years of
    reliable service.
    This meter also measures AC/DC and kVA.
    The meter can also measure power factor
    for single phase loads.
    It has Inrush current facility, Non Contact
    Voltage Detector, Data Hold and Peak
    Hold Function. This is the first 40000/4000
    counts Clamp on power meter.

    DT-3352
    1500AMP TRUE RMS AC/DC
    CLAMP POWER METER

    www.cem-india.com / www.cem-instruments.in
    DT-3352 1500Amp True RMS AC/DC Clamp Power Meter

    Input Limits
    Function Maximum Input
    A AC, 1500A DC/AC
    A DC 1500A DC/AC
    V DC, V AC 1000V DC/AC
    Resistance, Capacitance,
    250V DC/AC
    Frequency, Diode Test
    Type K Temperature 30V DC, 24V AC

    General Specifications

    Clamp Jaw Opening 2.0" (52mm) approx.


    Display Dual 40,000/4,000 count backlit LCD with Analogue Bargraph
    Continuity check Threshold 50Ω; Test current < 0.5mA
    Diode test Test current of 0.3mA typical;
    Open circuit voltage [2.8VDC typical]
    Low Battery indication Battery symbol is displayed
    Over-range Indication ‘OL’ display
    Inrush Current can measure Inrush Current for Motor starting application
    Data Hold Freezes displayed Data
    Peak Hold Freezes the peak values
    Non Contact Voltage Detector Indicates if the line is live or dead
    Measurement Rate 2 readings per second, nominal
    Peak Detector >1ms
    Thermocouple Sensor Type K thermocouple required
    Input Impedance 10MΩ (VDC and VAC)
    AC Bandwidth 50 to 400Hz (AAC and VAC)
    AC Response True rms (AAC and VAC)
    Crest Factor 3.0 in 40A and 400A ranges, 1.4 in 1000A range (50/60Hz and 5% to 100% of range)
    Operating Temperature 5°C to 40°C (41°F to 104°F)
    Storage Temperature -20°C to 60°C (-4°F to 140°F)
    Operating Humidity Max 80% up to 31°C (87°F) decreasing linearly to 50% at 40°C (104°F)
    Storage Humidity <80%
    Operating Altitude 7000ft. (2000meters) maximum.
    Battery One (1) 9V Battery (NEDA 1604)
    Auto Power Off After approx. 30 minutes
    Dimensions & Weight 11.57 x 4.13x1.85” (294x105x47mm); 18.9 oz. (536g)
    For indoor use and in accordance with the requirements for double insulation to IEC1010-1 (2001):
    Safety
    EN61010-1 (2001) Overvoltage Category III 600V and Category II 1000V, Pollution Degree 2.

    Approvals CE

    Contact :

    CEM
    CEM INSTRUMENTS (INDIA) PVT. LTD. CEM INSTRUMENTS HEADQUATER & FACTORY
    32A, Ganesh Chandra Avenue, 4th Floor, Kolkata-700013 19th Building, 5th Region, Baiwangxin Industry Park,
    Tel: 033-22151376, 22159759 Songbai Road, Baimang, Xili, Nanshan, Shenzhen,
    Email: info@cem-instrumets.in / info@cem-india.com China, 518108
    Web: www.cem-instruments.in / www.cem-india.com Tel: +86-755-27353188, Fax: +86-755-27653699
    DT-3352 1500Amp True RMS AC/DC Clamp Power Meter

    Technical Specifications
    Function Range& Resolution Accuracy (% of reading)
    400.00 ADC ± (2.0% +30digits)
    DC Current
    1500.0 ADC ± (2.5% +30digits)
    400.00 AAC ± (2.5% +30digits)
    AC Current
    1500.0 AAC ± (2.8% +30digits)
    True RMS (50Hz to 60 Hz)
    All AC voltage ranges are specified from 5% of range to 100% of range
    400.00 mVDC ± (0.1% + 9digits)
    4.0000 VDC
    DC Voltage 40.000 VDC ± (0.1% + 4 digits)
    400. 00 VDC
    1000.0 VDC ± (0.5% + 4 digits)
    400.0 mVAC ± (0.8% + 9digits) (50/60Hz)
    4.0000 VAC
    AC Voltage 40.000 VAC
    ± (1.0% + 30 digits)
    True RMS (50 Hz to 1000 Hz) 400. 00 VAC
    750.0 VAC
    All AC voltage ranges are specified from 5% of range to 100% of range
    400.00 Ω ± (0.5% + 9 digits)
    4.0000KΩ
    40.000KΩ ± (1.0% + 4 digits)
    Resistance
    400.00KΩ
    4.0000MΩ ± (2.0% + 10digits)
    40.000MΩ ± (3.0% + 10 digits)
    400.00nF ± (3.5% reading + 40digits)
    4000.0nF
    40.000μF ± (3.5% reading + 10digits)
    Capacitance 400.00μF
    4.0000mF
    ± (5% reading + 10 digits)
    20.000mF
    40.000mF Not specified
    40.000 Hz
    400.00 Hz
    4.0000KHz
    40.000KHz ± (0.3% reading + 2 digits)
    Frequency 400.00KHz
    4.0000MHz
    40.000MHz
    Sensitivity: 0.8V rms min. @ 20% to 80% duty cycle and <100kHz; 5Vrms
    min @ 20% to 80% duty cycle and > 100kHz.
    10.0 to 95.0% ± (1.0% reading + 2 digits)
    Duty Cycle
    Pulse width: 100µs - 100ms, Frequency: 10Hz to 100kHz
    Temp -100.0 to 1000.0°C ± (1.0% reading + 2.5 °C)
    (type-K) -148.0 to 1832.0°F ± (1.0% reading + 4.5°F)
    (probe accuracy not included) (probe accuracy not included)
    AC KW/kVA(0-600V,0- 900.0kW ± (3% +10digits)
    1500A,50/60Hz TRMS) All AC voltage ranges are specified from 5% of range to 100% of range
    DC KW/kVA(0-600 V,0-1500A) 900.0kW ± (2.8 % +10digits)

    Accessories
    Carrying Case, Test Leads, Battery, Temperature Probe, Instruction Manual and Test Certificate.

    Contact :

    CEM
    CEM INSTRUMENTS (INDIA) PVT. LTD. CEM INSTRUMENTS HEADQUATER & FACTORY
    32A, Ganesh Chandra Avenue, 4th Floor, Kolkata-700013 19th Building, 5th Region, Baiwangxin Industry Park,
    Tel: 033-22151376, 22159759 Songbai Road, Baimang, Xili, Nanshan, Shenzhen,
    Email: info@cem-instrumets.in / info@cem-india.com China, 518108
    Web: www.cem-instruments.in / www.cem-india.com Tel: +86-755-27353188, Fax: +86-755-27653699

    You might also like