Wacker
Wacker
Wacker
c o m
vibratory plates
Model Oper. Wt. Size of base plate HP Cent. Force Frequency Speed FT2/h Engine
kg (lb) mm (in) (lb) VPM (ft/min) Manufacturer
VP 1135AW 65 (142) 520x350 4 2,470 5,800 85 5,900 Honda
(20.5x14)
VP 1340AW 76 (168) 590x400 5.5 2,925 5,800 75 5,900 Honda
(23x15.5)
VP 1340W 76 (168) 590x400 6 2,925 5,800 75 5,900 Wacker
( 23x15.5)
VP 1550AW 86 (190) 590x500 5.5 3,375 5,800 67 6,600 Honda
( 23x19.5)
VP 1550W 83 (184) 590x500 6 3,375 5,800 67 6,600 Wacker
(23x19.5)
WP 1540AW 86 (190) 585x400 5.5 3,375 6,000 100 6,600 Honda
(23x15.5)
WP 1540AW 86 (190) 585x400 5.5 3,375 6,000 100 6,590 Honda
with wheel (23x15.5)
WP 1540W 86 (190) 585x400 6 3,375 6,000 100 6,590 Wacker
(23x15.5)
WP 1550AW 88 (194) 585x500 5.5 3,375 6,000 100 9,750 Honda
(23x19.5)
WP 1550W 88 (194) 585x500 6 3,375 6,000 100 9,750 Wacker
(23x19.5)
vibratory plates
VIBRATORY PLATES: Single Direction Soil
VP 2050 VP 1340
Model Oper. Wt. Size of base plate HP Cent. Force Frequency Speed FT2/h Engine
kg (lb) mm (in) (lb) VPM (ft/min) Manufacturer
VP 1135A 62 (137) 520x350 4 2,470 5,800 85 5,900 Honda
(20.5x14)
VP 1340 74 (163) 590x400 6 2,925 5,800 75 5,900 Wacker
(23x15.5)
VP 1340A 74 (163) 590x400 5.5 2,925 5,900 75 5,900 Honda
(23x15.5)
VP 1550 83 (184) 590x500 6 3,375 5,800 67 6,600 Wacker
(23x19.5)
VP 1550A 83 (184) 590x500 5.5 3,375 5,800 67 6,600 Honda
(23x19.5)
VP 2050A 103 (230) 590x500 5.5 4,500 5,800 80 7,880 Honda
(23x19.5)
WP 1540 86 (190) 585x400 6 3,375 6,000 100 6,590 Wacker
(23x15.5)
WP 1540A 86 (190) 585x400 5.5 3,375 6,000 100 6,590 Honda
(23x15.5)
WP 1550 88 (194) 585x500 6 3,375 6,000 100 9,750 Wacker
(23x19.5)
WP 1550A 88 (194) 585x500 5.5 3,375 6,000 100 9,750 Honda
(23x19.5)
Model Oper. Wt. Plate Width HP Cent. Force Vibration Frequency FT2/h Engine
kg (lb) (in) (lb) (ft/min) Manufacturer
VIBRATORY ROLLERS
Walk Behind Rollers – Ideal for small repair and maintenance jobs on roadways, walkways, bridges and
parking lots.
Trench Rollers – Ideally suited for the compaction of sub bases for foundations, roads and parking lots.
Ride On Rollers – Offer articulated hydrostatic drive, extreme maneuverability and high curb clearance.
The model RD12A-90 features fuel efficient diesel power, two speed operation and a water sprinkling system
for asphalt.
Model Oper. Wt. Drum Width HP Cent. Force Frequency VPM Speed FT2/h Engine
(lb) mm (in) (lb) (ft/min) Manufacturer
WALK BEHIND ROLLERS
RD 7H-ES 1,785 650 25.5 8.6 2,925 3,300 0-220 28,115 Hatz
RS 800A 975 560 22.0 11 3,400 4,200 0-200 28,300 Honda
RSS 800A 1,000 560 22.0 11 3,400 4,200 0-150 28,300 Honda RT 82-SC
TRENCH ROLLERS
RT 56-SC 3,068 560 22.0 21 15,400 2,500 66/131 7,260 Lombardi
RT 82-SC 3,247 820 32.0 21 15,400 2,500 66/131 10,560 Lombardi
RIDE-ON ROLLERS
RD 12A-90 2,490 900 35.4 18 3,400 4,200 0-475 84,100 Honda
RD 12A-90
4
Power Source (hp) Universal electric motor Universal electric motor Universal electric motor
Power (hp) 1.3 2.3 3.1
Voltage (V) 115.0 115.0 115.0
Rated Amperage (A) 9.0 15.0 20.0
Frequency (Hz) 50-60 50-60 50-60
Speed no-Load (rpm) 15,500 17,500 16,500
Cord Length (in) 24 24 24
Plug Type 120V, 15A, grounded, std. blade 120V, 15A, grounded, std. blade 120v, 20A, grounded twistlock
Overall size (l x w x h) 13.75 x 6.25 x 8 in 13.75 x 6.25 x 8 in 13.75 x 6.25 x 8 in
Weight (lb) 12.0 13.0 18.0
Shipping Size (in) 17 x 7 x 10 in 17 x 7 x 10 in 17 x 7 x 10 in
Shipping Weight (lb) 14.0 15.5 20
VIBRATOR HEADS
Vibrator Heads H 25 H 25S H 35 H 35S H 45 H 45S H 55 H 65
vibrator / flexshafts
FLEXSHAFTS FOR INTERNAL VIBRATORS
SM0-S
Model SM1-E SM2-E SM4-E SM0-S SM1-S SM2-S SM3-S SM4-S SM5-S SM7-S
COMPATIBILITY CHART
Model SM1-E SM2-E SM4-E SM0-S SM1-S SM2-S SM3-S SM4-S SM5-S SM7-S SM9-S
M1000
H25 M2000
M3000
M1000
H35 M2000
M3000
M2000
H45
M3000
M2000
H55
M3000
M2000
H65
M3000
AR 51
Model Weight Centrifugal Force Speed Range Power kW Voltage Frequency Current
(lbs) (lbs) (rpm) (Hz) (Amps)
AR 51/3, 6/460 46.96 1,920 3,600 0,9 230/460;3~V 60 3/1.5A
AR 52/3, 6/480 46.5 1,920 3,600 0,9 230/460;3~V 60 3/1.5A
AR 54/3, 6/480 32.85 1,920 3,600 0,9 230/460;3~V 60 3/1.5A
AR 75/3, 6/460 64.6 3,867 3,600 1,4 230/460;3~V 60 4.2/2.1
internal vibrators
ELECTRIC INTERNAL VIBRATORS Model IRFUN 38 IRFUN 45 IRFUN 57
Nothing upsets these internal vibrators with inte- Vibrator head (in) 1.5 1.8 2.3
grated inverters because the motor speed remains Vibrator head length (in) 13.6 15.0 15.7
constant no matter what the properties of the freshly Vibrator head weight (lb) 4.9 7.7 12.8
mixed concrete.The result: a job uniformly well done. Protection Hose (ft) 18.0 18.0 18.0
In addition, they prove their worth with their maxi- Operating Weight (lbs) 28.7 34.0 43.7
mum compaction diameter Effective Compaction (in) 19.7 23.6 33.5
and topmost compaction Vibration frequency (rpm) 12,000 12,000 12,000
performance. Because arising Engine Type 3-phase high frequency squirrel cage induction motor
electrical currents, which Power Draw (hp) 0.74 1.0 1.7
could endanger the operator, Input Current (A) 6.0 8.0 12.0
are switched off so quickly Vibrator head Voltage (Hz) 214 3~ 214 3~ 214 3~
(<2 ms) by the IRFUN, safety Supply Cable (ft) 49.2 49.2 49.2
is uncompromised. And they Power Train Directly from built-in electric motor to vibration system
are also short circuit proof. IRFUN 38
Powerful and reliable high frequency internal vibrators Vibrator head (in) 2.3 2.6
with an integrated electric motor in the vibrator Vibrator head length (in) 15.7 19.3
head. The housing has been specially designed for the Vibrator head weight (lb) 12.8 20.3
professional vibration of fresh concrete, above all for Protection Hose (ft) 16.4 16.4
consistency). This type of Engine Type 3-phase high frequency squirrel cage induction motor
any other job that requires Rated Current (A) 3.1 4.4
compaction. Power Train directly from built-in electric motor to vibration system
Model LxWxH Weight (lbs) Vibrations (rpm) Centrifugal Force (lbs) Drive Oper. Pressure Air Consumption
PAR 6/2 6.4 x 7.5 x 5.5 13.9 17,000 1,349 Compressed Air 87 psi 35, 3
PAR 10/2 6.4 x 7.5 x 5.5 15.9 16,500 2,248 Compressed Air 87 psi 38.9
PAR 27/2 7.1 x 9.5 x 8.5 33.7 13,500 6,070 Compressed Air 87 psi 55.8
PAR 45/2 7.1 x 9.5 x 8.5 36.4 10,116 10,116 Compressed Air 87 psi 58.6
PAR 60/2 7.1 x 9.5 x 8.5 37.5 14,500 13,488 Compressed Air 87 psi 65
8
HPG 100
WET SCREEDS
Wet screeds offers both reliable perform- Power Displacement HP Weight
Section cm3 lbs
ance and operator comfort.
P 31A 31 1.5 34
Wacker’s wet screeds can fit the needs of Blade Length Width Weight Blade Length Width Weight
every job-site with a variety of blade lengths, models (ft or m) (in) lbs models (ft or m) (in) lbs
plus each unit is designed to fit the demands SB 4F 4 4.9 7.6 SBW 4F 4 6.5 8.4
of every operator. SB 6F 6 4.9 11.4 SBW 6F 6 6.5 11.9
SB 8F 8 4.9 15.2 SBW 8F 8 6.5 15.3
SB 10F 10 4.9 19 SBW 10F 10 6.5 19.2
SB 12F 12 4.9 22 SBW 12F 12 6.5 25.1
SB 14F 14 4.9 28.5 SBW 14F 14 6.5 29.3
SB 15M 4.9 4.9 9.5 SBW 15M 4.9 6.5 10.1
SB 16F 16 4.9 30.4 SBW 16F 16 6.5 33.5
SB 20M 6.58 4.9 12.4 SBW 20M 6.58 6.5 13.5
WET SCREED
trowels
WALK BEHIND CONCRETE TROWELS
Walk behind concrete power trowels incorporate the following handy features to speed completion of projects and
maintain uptime: wide pitch control range of 0-15˚ which can be adjusted during operation of equipment; centrifugal
clutch pulley that automatically adjusts for belt stretch; and blade pitch control and drive components that are heat
treated and rust resistant for extra long life.
CRT 48
10
CUT-OFF SAWS
Cut or trim beams, brick slabs, curbstones, expansion joints, concrete or
asphalt openings, steel rods and girders with the BTS series of portable cut-off
saws. Applications for municipalities include steel rod and tile cutting and
are ideal for fire or rescue work.
FLOOR SAWS
These floor saws offer 2 in 1: The indefinitely adjustable cutting depth feature in
combination with the unique cutmatic system.This special mechanism allows
the operator to pull the blade out of cut with no effort and cutmatic remembers
the exact preset cutting depth. Because of this, cutting depth does not need
to be readjusted when lowering the blade once again into the joint.This helps
carry out cutting applications faster, more precisely and more comfortably.
11
light towers
TRAILER-MOUNTED LIGHT TOWERS
Trailer-mounted light towers are designed for one person set-up and operation
in construction, commercial industrial jobs and applications where reliable
lighting is required.
Light Tower features:
with
• Lockable, weather protected, power-coated steel enclosure.
la b le
Avai ® Diesel!
• 360˚ rotating mast with lifting eye. CAT
• Individual lamp/ballast circuit breakers with indicator lights.
• Large diameter zinc coated outriggers.
• 4-2,000 lb. Rated galvanized leveling jacks.
• Self-breaking double manual winch system (single electric)
with automatic brake & aircraft quality cable.
• Fully equipped control panel has 120V/20A GFI
duplex and 240V/30A convenient receptacles.
• Elapsed hour meter and DC volt meter.
• Reliable diesel power with glow plug preheat system.
• Automatic engine shutdown.
• Brushless, self-regulated, AC synchronous generator.
• Fully equipped trailer.
LTC 4C
12
PORTABLE GENERATORS
High performance generators are designed for construction, industrial, commercial, domestic and farm
electrical applications.
13
mobile generators
MOBILE GENERATORS
Heavy-duty, compact trailer and skid-mounted generators are designed to provide single and three-phased portable
power for construction, commercial and industrial applications.
G 70
14
DIAPHRAGM PUMPS
The PD diaphragm trash pumps are used for clear water as well as
water containing debris or solids up to 1.75 inches in diameter.
These pumps are ideal for mud, slurries and seepage application.
PD 2
15
pumps
ELECTRICAL SUBMERSIBLE PUMPS
Wacker’s lightweight, portable submersible pumps are used for dewatering clear water, water containing
debris, or solids up to 1/4 inch diameter.
Model Oper. Discharge Diameter Max. Cap HP Voltage Head Max. Phase Min. Genset
Wt (lb) (in) (gpm) Size (in)
PS 2 400 25 2 53 1/2 110 39 1 G 2.5A
PS 2 500 21 2 62.4 2/3 110, 220 39.5 1 G 2.5A
PS 2 750 35 2 73 1 110 60 1 G 3.7A
PS 3 1500 63.5 3 111 2 110 69 1 G 12
PS 2 1503 64 2 106 2 220 75 3 G 25
PS 3 1503 64 3 180 2 220 47 3 G 25
PS 2 2203 71 2 132 3 220 100 3 G 25
PS 3 2203 71 3 203 3 220 67 3 G 25
PS 2 3703 121 2 143 5 220 115 3 G 50
PS 3 3703 121 3 219 5 220 102 3 G 50
PS 4 3703 121 4 386 5 440 61 3 G 50
PS 3 5503 146 3 260 7.5 220 125 3 G 50
PS 4 5503 168 4 428 7.5 440 79 3 G 50
PS 4 7503HH 205 4 394 10 440 137 3 G 50
PS 4 7503HF 205 4 549 10 440 137 3 G 50
PS 4 11003HH 287 4 377 15 440 167 3 G 50
PS 4 11003HF 287 4 645 15 440 107 3 G 50
PS 4
16