Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 22 views

    Repair Procedures

    Uploaded by

    Baggerking
    The document provides instructions for removing and installing the rear seat belt on a 2004 Sorento with a 3.5L DOHC engine. It outlines 6 steps: 1) Remove the lower seat belt anchor bolt. 2) Remove the rear side trim pieces. 3) Remove the C pillar trim. 4) Remove the upper seat belt anchor bolt. 5) Remove the retractor by taking out its anchor bolt and screw. 6) Reinstall the parts in reverse order. Tightening torques are specified for each bolt.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Repair Procedures

    Uploaded by

    Baggerking
    22 views3 pages
    The document provides instructions for removing and installing the rear seat belt on a 2004 Sorento with a 3.5L DOHC engine. It outlines 6 steps: 1) Remove the lower seat belt anchor bolt. 2) Remove the rear side trim pieces. 3) Remove the C pillar trim. 4) Remove the upper seat belt anchor bolt. 5) Remove the retractor by taking out its anchor bolt and screw. 6) Reinstall the parts in reverse order. Tightening torques are specified for each bolt.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides instructions for removing and installing the rear seat belt on a 2004 Sorento with a 3.5L DOHC engine. It outlines 6 steps: 1) Remove the lower seat belt anchor bolt. 2) Remove the rear side trim pieces. 3) Remove the C pillar trim. 4) Remove the upper seat belt anchor bolt. 5) Remove the retractor by taking out its anchor bolt and screw. 6) Reinstall the parts in reverse order. Tightening torques are specified for each bolt.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    22 views3 pages

    Repair Procedures

    Uploaded by

    Baggerking
    The document provides instructions for removing and installing the rear seat belt on a 2004 Sorento with a 3.5L DOHC engine. It outlines 6 steps: 1) Remove the lower seat belt anchor bolt. 2) Remove the rear side trim pieces. 3) Remove the C pillar trim. 4) Remove the upper seat belt anchor bolt. 5) Remove the retractor by taking out its anchor bolt and screw. 6) Reinstall the parts in reverse order. Tightening torques are specified for each bolt.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    SORENTO(BL) >2004 > G 3.

    5 DOHC > Body (Interior and Exterior)

    REMOVAL AND INSTALLATION


    1. Remove seat belt lower anchor bolt.

    Tightening torque :
    40-55 N·m (4.0-5.5 kg·m, 29-40 lb·ft)

    2. Remove rear side trim.


    (1) Remove rear door scuff trim.

    (2) Remove rear transverse trim.

    (3) Remove hanger net.


    (4) Remove rear side trim screws (5).
    3. Remove C pillar trim.

    4. Remove seat belt upper anchor bolt.

    Tightening torque :
    40-55 N·m (4.0-5.5 kg·m, 29-40 lb·ft)

    5. Remove retractor.
    (1) Remove retractor anchor bolt.

    Tightening torque :
    40-55 N·m (4.0-5.5 kg·m, 29-40 lb·ft)
    (2) Remove retractor screw.

    Tightening torque :
    18-27 N·m (1.8-2.7 kg·m, 13-20 lb·ft)

    6. Install in reverse order of removal.

    You might also like