Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 41 views

    Final Inspection Report Turbine

    Uploaded by

    Muhammad Zaki
    The documents contain inspection reports for various turbine parts including a rotor turbine, turbine generator, and oil deflector bearing. Measurements were taken of runout, alignment, and clearances. Parameters such as position, milimeters of deviation, and clearances are reported. The parts were inspected for quality before and after work was completed.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    Final Inspection Report Turbine

    Uploaded by

    Muhammad Zaki
    41 views20 pages
    The documents contain inspection reports for various turbine parts including a rotor turbine, turbine generator, and oil deflector bearing. Measurements were taken of runout, alignment, and clearances. Parameters such as position, milimeters of deviation, and clearances are reported. The parts were inspected for quality before and after work was completed.

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The documents contain inspection reports for various turbine parts including a rotor turbine, turbine generator, and oil deflector bearing. Measurements were taken of runout, alignment, and clearances. Parameters such as position, milimeters of deviation, and clearances are reported. The parts were inspected for quality before and after work was completed.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    41 views20 pages

    Final Inspection Report Turbine

    Uploaded by

    Muhammad Zaki
    The documents contain inspection reports for various turbine parts including a rotor turbine, turbine generator, and oil deflector bearing. Measurements were taken of runout, alignment, and clearances. Parameters such as position, milimeters of deviation, and clearances are reported. The parts were inspected for quality before and after work was completed.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    You are on page 1of 20

    `

    RUN OUT INSPECTION REPORT


    JOB NO : PART NAME : ROTOR TURBINE #1
    CUSTOMER : PT. WIJAYA TRI UTAMA PLYWOOD I. ROTATION : N/A
    OEM : N/A TAG NUMBER : N/A
    EQUIPMENT : N/A QUANTITY : N/A

    STATUS : AS RECEIVED ✘ FINAL SURFACE : ✘ RADIAL AXIAL UNITS : ✘ MILLIMETERS INCHES

    1 2 3 5 6 7

    POS MOP Journal #1 HP Gland Interstage LP Gland Journal #2 Coupling


    TIR 1 1 2 3 3 1 3

    PREPARED BY : CHECKED & APPROVED BY : CUSTOMER BY :

    DATE : DATE : DATE :

    THIS MATERIAL IS THE EXCLUSIVE PROPERTY OF PT. SURYA SAKTI SUKSES

    FMP-10/04 // Rev 2 // 17-01-2017 Page 1 of 20


    `
    RUN OUT INSPECTION REPORT
    JOB NO : PART NAME : RUNOUT TURBINE_GENERATOR
    CUSTOMER : PT. WIJAYA TRI UTAMA PLYWOOD I. ROTATION : N/A
    OEM : N/A TAG NUMBER : N/A
    EQUIPMENT : N/A QUANTITY : N/A

    STATUS : AS RECEIVED ✘ FINAL SURFACE : ✘ RADIAL AXIAL UNITS : ✘ MILLIMETERS INCHES

    A B
    C

    TURBINE GENERATOR

    POS 0 ° 45 ° 90 ° 135 ° 180 ° 225 ° 270 ° 315 ° 360 °


    A 0.00 -0.01 -0.01 -0.02 -0.01 0.00 -0.01 0.00 0.00
    B 0.00 0.02 0.01 0.01 0.01 0.00 0.01 0.01 0.00
    C 0.00 0.00 0.01 0.02 0.02 0.01 0.01 0.01 0.00

    PREPARED BY : CHECKED & APPROVED BY : CUSTOMER BY :

    DATE : DATE : DATE :

    THIS MATERIAL IS THE EXCLUSIVE PROPERTY OF PT. SURYA SAKTI SUKSES

    FMP-10/04 // Rev 2 // 17-01-2017 Page 2 of 20


    ALIGNMENT INSPECTION
    JOB NO : PART NAME : ALIGNMENT TURBINE-GEN.
    CUSTOMER : PT. WIJAYA TRI UTAMA P.I ROTATION : N/A
    OEM : N/A TAG NUMBER : N/A
    EQUIPMENT : N/A QUANTITY : N/A

    STATUS : AS RECEIVED ✘ FINAL SURFACE : ✘ RADIAL ✘ AXIAL UNITS : ✘ MILLIMETERS INCHES

    RADIAL AXIAL

    0.00 0.00

    -0.04 -0.01 -0.03 0.00

    -0.03 -0.02

    PREPARED BY : CHECKED & APPROVED BY : CUSTOMER BY :

    DATE : DATE : DATE :

    THIS MATERIAL IS THE EXCLUSIVE PROPERTY OF PT. SURYA SAKTI SUKSES

    FMP-10/03 // Rev 2 // 17-01-2017 Page 3 of 20


    CLEARANCE INSPECTION
    JOB NO : PART NAME : OIL DEFLECTOR BRG #1
    CUSTOMER : PT. WIJAYA TRI UTAMA P.I ROTATION : N/A
    OEM : N/A TAG NUMBER : N/A
    EQUIPMENT : N/A QUANTITY : N/A

    STATUS : AS RECEIVED ✘ FINAL SURFACE : ✘ RADIAL AXIAL UNITS : ✘ MILLIMETERS INCHES

    Oil Deflector #1 Oil Deflector #2


    Clearance
    Design

    Bottom

    Bottom
    Seal

    Right

    Right
    Top

    Top
    Left

    Left

    1 0.25 0.25 0.15 0.5 0.20 0.20 0.30 0.10


    0.22 - 0.37

    2 0.25 0.25 0.15 0.5 0.20 0.20 0.30 0.10


    3 0.25 0.25 0.15 0.5 0.20 0.20 0.30 0.10
    4 0.25 0.25 0.15 0.5 0.20 0.20 0.30 0.10

    PREPARED BY : CHECKED & APPROVED BY : CUSTOMER BY :

    DATE : DATE : DATE :

    THIS MATERIAL IS THE EXCLUSIVE PROPERTY OF PT. SURYA SAKTI SUKSES

    FMP-10/03 // Rev 2 // 17-01-2017 Page 4 of 20


    DIMENSIONAL INSPECTION REPORT
    JOB NO : PART NAME : THRUST PAD BEARING
    CUSTOMER : PT. WIJAYA TRI UTAMA P.I ROTATION : N/A
    OEM : N/A TAG NUMBER : N/A
    EQUIPMENT : N/A QUANTITY : N/A

    STATUS : AS RECEIVED ✘ FINAL SURFACE : RADIAL ✘ AXIAL UNITS : ✘ MILLIMETERS INCHES

    Axial Clearance
    POS
    Actual Design
    Thrust Bearing 0.35 0.30 - 0.40

    PREPARED BY : CHECKED & APPROVED BY : CUSTOMER BY :

    DATE : DATE : DATE :

    THIS MATERIAL IS THE EXCLUSIVE PROPERTY OF PT. SURYA SAKTI SUKSES

    FMP-10/03 // Rev 2 // 17-01-2017 Page 5 of 20


    DIMENSIONAL INSPECTION REPORT
    JOB NO : PART NAME : HP GLAND SEAL
    CUSTOMER : PT. WIJAYA TRI UTAMA P.I ROTATION : N/A
    OEM : N/A TAG NUMBER : N/A
    EQUIPMENT : N/A QUANTITY : N/A

    STATUS : ✘ AS RECEIVED FINAL SURFACE : ✘ RADIAL AXIAL UNITS : ✘ MILLIMETERS INCHES

    Actual Clearance Actual Clearance


    Clearance

    Clearance
    HP Gland

    HP Gland
    Number

    Number
    Design

    Design
    Bottom

    Bottom
    Seal

    Seal
    Right

    Right
    Top

    Top
    Left

    Left

    H1 0.25 0.25 0.50 0.30 H1 0.20 0.25 0.50 0.35


    H2 0.25 0.25 0.50 0.30 H2 0.20 0.25 0.50 0.35
    A C
    H3 0.25 0.25 0.50 0.30 H3 0.20 0.25 0.50 0.35
    0.15 - 0.20

    0.15 - 0.20

    H4 0.25 0.25 0.50 0.30 H4 0.20 0.25 0.50 0.35


    H1 0.30 0.30 0.50 0.35 H1 0.20 0.25 0.50 0.35
    H2 0.30 0.30 0.50 0.35 H2 0.20 0.25 0.50 0.35
    B D
    H3 0.30 0.30 0.50 0.35 H3 0.20 0.25 0.50 0.35
    H4 0.30 0.30 0.50 0.35 H4 0.20 0.25 0.50 0.35

    PREPARED BY : CHECKED & APPROVED BY : CUSTOMER BY :

    DATE : DATE : DATE :

    THIS MATERIAL IS THE EXCLUSIVE PROPERTY OF PT. SURYA SAKTI SUKSES

    FMP-10/03 // Rev 2 // 17-01-2017 Page 6 of 20


    DIMENSIONAL INSPECTION REPORT
    JOB NO : PART NAME : LP GLAND SEAL
    CUSTOMER : PT. WIJAYA TRI UTAMA P.I ROTATION : N/A
    OEM : N/A TAG NUMBER : N/A
    EQUIPMENT : N/A QUANTITY : N/A

    STATUS : AS RECEIVED ✘ FINAL SURFACE : ✘ RADIAL AXIAL UNITS : ✘ MILLIMETERS INCHES

    Actual Clearance
    Clearance
    LP Gland
    Number

    Design

    Bottom
    Seal

    Right

    Top
    Left

    1 0.30 0.20 0.55 0.40


    2 0.30 0.20 0.55 0.40
    3 0.30 0.20 0.55 0.40
    4 0.30 0.20 0.55 0.40
    L
    5 0.30 0.20 0.55 0.40
    6 0.30 0.20 0.55 0.40
    0.15 - 0.20

    7 0.30 0.20 0.55 0.40


    8 0.30 0.20 0.55 0.40
    1 0.30 0.30 0.50 0.40
    2 0.30 0.30 0.50 0.40
    M
    3 0.30 0.30 0.50 0.40
    4 0.30 0.30 0.50 0.40
    1 0.25 0.20 0.50 0.40
    N 2 0.25 0.20 0.50 0.40
    3 0.25 0.20 0.50 0.40

    PREPARED BY : CHECKED & APPROVED BY : CUSTOMER BY :

    DATE : DATE : DATE :

    THIS MATERIAL IS THE EXCLUSIVE PROPERTY OF PT. SURYA SAKTI SUKSES

    FMP-10/03 // Rev 2 // 17-01-2017 Page 7 of 20


    DIMENSIONAL INSPECTION REPORT
    JOB NO : PART NAME : BALANCE DRUM
    CUSTOMER : PT. WIJAYA TRI UTAMA P.I ROTATION : N/A
    OEM : N/A TAG NUMBER : N/A
    EQUIPMENT : N/A QUANTITY : N/A

    STATUS : AS RECEIVED ✘ FINAL SURFACE : ✘ RADIAL AXIAL UNITS : ✘ MILLIMETERS INCHES

    Actual Clearance Actual Clearance


    Balance Drum

    Balance Drum
    Clearance

    Clearance
    Design

    Design
    Bottom

    Bottom
    Seal

    Seal
    Right

    Right
    Top

    Top
    Left

    Left
    1 0.20 0.20 0.40 0.35 1 0.20 0.20 0.40 0.35
    2 0.20 0.20 0.40 0.35 2 0.20 0.20 0.40 0.35
    3 0.20 0.20 0.40 0.35 3 0.20 0.20 0.40 0.35
    4 0.20 0.20 0.40 0.35 4 0.20 0.20 0.40 0.35
    0.15 - 0.20

    5 0.20 0.20 0.40 0.35 5 0.20 0.20 0.40 0.35


    E G
    6 0.20 0.20 0.40 0.35 6 0.20 0.20 0.40 0.35
    7 0.20 0.20 0.40 0.35 7 0.20 0.20 0.40 0.35
    8 0.20 0.20 0.40 0.35 8 0.20 0.20 0.40 0.35
    9 0.20 0.20 0.40 0.35 9 0.20 0.20 0.40 0.35
    0.15 - 0.20

    10 0.20 0.20 0.40 0.35 10 0.20 0.20 0.40 0.35


    1 0.20 0.20 0.40 0.35
    2 0.20 0.20 0.40 0.35
    3 0.20 0.20 0.40 0.35
    4 0.20 0.20 0.40 0.35
    5 0.20 0.20 0.40 0.35
    F
    6 0.20 0.20 0.40 0.35
    7 0.20 0.20 0.40 0.35
    8 0.20 0.20 0.40 0.35
    9 0.20 0.20 0.40 0.35
    10 0.20 0.20 0.40 0.35

    PREPARED BY : CHECKED & APPROVED BY : CUSTOMER BY :

    DATE : DATE : DATE :

    FMP-10/03 // Rev 2 // 17-01-2017 Page 9 of 20


    THIS MATERIAL IS THE EXCLUSIVE PROPERTY OF PT. SURYA SAKTI SUKSES

    DIMENSIONAL INSPECTION REPORT


    JOB NO : PART NAME : BALANCE DRUM
    CUSTOMER : PT. WIJAYA TRI UTAMA P.I ROTATION : N/A
    OEM : N/A TAG NUMBER : N/A
    EQUIPMENT : N/A QUANTITY : N/A

    STATUS : AS RECEIVED FINAL SURFACE : RADIAL AXIAL UNITS : MILLIMETERS INCHES

    Actual Clearance Actual Clearance


    Balance Drum

    Balance Drum
    Clearance

    Clearance
    Design

    Design
    Bottom

    Bottom
    Seal

    Seal
    Right

    Right
    Top

    Top
    Left

    Left

    H1 0.25 0.40 0.55 0.50 H1 0.30 0.35 0.55 0.50


    H2 0.25 0.40 0.55 0.50 H2 0.30 0.35 0.55 0.50
    0.15 - 0.20

    H3 0.25 0.40 0.55 0.50 H3 0.30 0.35 0.55 0.50


    I K
    L1 0.25 0.40 0.55 0.50 H4 0.30 0.35 0.55 0.50
    L2 0.25 0.40 0.55 0.50 H5 0.30 0.35 0.55 0.50
    0.15 - 0.20

    L3 0.25 0.40 0.55 0.50 L1 0.30 0.35 0.55 0.50


    H1 0.25 0.50 0.65 0.55
    H2 0.25 0.50 0.65 0.55
    H3 0.25 0.50 0.65 0.55
    J
    L1 0.25 0.50 0.65 0.55
    L2 0.25 0.50 0.65 0.55
    L3 0.25 0.50 0.65 0.55

    PREPARED BY : CHECKED & APPROVED BY : CUSTOMER BY :

    DATE : DATE : DATE :

    THIS MATERIAL IS THE EXCLUSIVE PROPERTY OF PT. SURYA SAKTI SUKSES

    FMP-10/03 // Rev 2 // 17-01-2017 Page 10 of 20


    CLEARANCE INSPECTION REPORT
    JOB NO : PART NAME : Labyrinth Interstage #1 - #7
    CUSTOMER : PT. WIJAYA TRI UTAMA P.I ROTATION : N/A
    OEM : N/A TAG NUMBER : N/A
    EQUIPMENT : N/A QUANTITY : N/A

    STATUS : AS RECEIVED ✘ FINAL SURFACE : ✘ RADIAL AXIAL UNITS : ✘ MILLIMETERS INCHES

    Actual Clearance Actual Clearance


    Clearance

    Clearance
    Interstage

    Interstage
    Number

    Number
    Design

    Design
    Bottom

    Bottom
    Seal

    Seal
    Right

    Right
    Top

    Top
    Left

    Left
    H1 0.25 0.40 0.45 0.50 H1 0.30 0.30 0.80 >1.0
    H2 0.25 0.40 0.45 0.50 H2 0.30 0.30 0.80 >1.0
    1 L1 0.25 0.40 0.45 0.50 5 L1 0.30 0.30 0.80 >1.0
    L2 0.25 0.40 0.45 0.50 L2 0.30 0.30 0.80 >1.0
    L3 0.25 0.40 0.45 0.50 L3 0.30 0.30 0.80 >1.0
    H1 0.25 0.50 0.60 0.50 H1 0.30 0.30 >1.0 >1.0
    0.25 - 0.30

    H2 0.25 0.50 0.60 0.50 H2 0.30 0.30 >1.0 >1.0


    2 L1 0.25 0.50 0.60 0.50 6 L1 0.30 0.30 >1.0 >1.0
    L2 0.25 0.50 0.60 0.50 L2 0.30 0.30 >1.0 >1.0
    0.25 - 0.30

    L3 0.25 0.50 0.60 0.50 L3 0.30 0.30 >1.0 >1.0


    H1 0.30 0.25 1.00 >1.0 H1 0.50 0.25 >1.0 >1.0
    H2 0.30 0.25 1.00 >1.0 H2 0.50 0.25 >1.0 >1.0
    3 L1 0.30 0.25 1.00 >1.0 7 L1 0.50 0.25 >1.0 >1.0
    L2 0.30 0.25 1.00 >1.0 L2 0.50 0.25 >1.0 >1.0
    L3 0.30 0.25 1.00 >1.0 L3 0.50 0.25 >1.0 >1.0
    H1 0.30 0.80 0.65 >1.0
    H2 0.30 0.80 0.65 >1.0
    4 L1 0.30 0.80 0.65 >1.0
    L2 0.30 0.80 0.65 >1.0
    L3 0.30 0.80 0.65 >1.0

    PREPARED BY : CHECKED & APPROVED BY : CUSTOMER BY :

    DATE : DATE : DATE :

    THIS MATERIAL IS THE EXCLUSIVE PROPERTY OF PT. SURYA SAKTI SUKSES

    FMP-10/03 // Rev 2 // 17-01-2017 Page 11 of 20


    CLEARANCE INSPECTION REPORT
    JOB NO : PART NAME : BEARING 1-2
    CUSTOMER : PT. WIJAYA TRI UTAMA P.I ROTATION : N/A
    OEM : N/A TAG NUMBER : N/A
    EQUIPMENT : N/A QUANTITY : N/A

    STATUS : AS RECEIVED ✘ FINAL SURFACE : ✘ RADIAL AXIAL UNITS : ✘ MILLIMETERS INCHES

    BEARING #1 BEARING #2
    POINT ACTUAL ACTUAL
    DESIGN DESIGN
    A B A B
    V 0.22 0.20 0.20 - 0.25 0.22 0.22 0.20 - 0.25

    H1
    0.13 0.13 0.13 0.13
    (LEFT)
    0.20 - 0.25 0.20 - 0.25
    H2
    0.13 0.13 0.13 0.13
    (RIGHT)

    PREPARED BY : CHECKED & APPROVED BY : CUSTOMER BY :

    DATE : DATE : DATE :

    THIS MATERIAL IS THE EXCLUSIVE PROPERTY OF PT. SURYA SAKTI SUKSES

    Page 12 of 20
    DIMENSIONAL INSPECTION REPORT
    JOB NO : PART NAME : ROTOR CENTER BORE
    CUSTOMER : PT. WIJAYA TRI UTAMA P.I ROTATION : N/A
    OEM : N/A TAG NUMBER : N/A
    EQUIPMENT : N/A QUANTITY : N/A

    STATUS : AS RECEIVED ✘ FINAL SURFACE : ✘ RADIAL AXIAL UNITS : ✘ MILLIMETERS INCHES

    Oil Deflector

    Bottom
    Right
    Left

    #1 62.12 62.15 62.20

    #2 60.89 60.93 60.84

    PREPARED BY : CHECKED & APPROVED BY : CUSTOMER BY :

    DATE : DATE : DATE :

    THIS MATERIAL IS THE EXCLUSIVE PROPERTY OF PT. SURYA SAKTI SUKSES

    FMP-10/03 // Rev 2 // 17-01-2017 Page 13 of 20


    DIMENSIONAL INSPECTION REPORT
    JOB NO : PART NAME : CASE WEARING MOP
    CUSTOMER : PT. WIJAYA TRI UTAMA P.I ROTATION : N/A
    OEM : N/A TAG NUMBER : N/A
    EQUIPMENT : N/A QUANTITY : N/A

    STATUS : AS RECEIVED ✘ FINAL SURFACE : ✘ RADIAL AXIAL UNITS : ✘ MILLIMETERS INCHES

    Left / Right

    Bottom

    Actual Clearance
    Case Wearing

    Bottom
    Right
    Left

    1 0.07 0.07 0.15

    2 0.07 0.07 0.15

    PREPARED BY : CHECKED & APPROVED BY : CUSTOMER BY :

    DATE : DATE : DATE :

    THIS MATERIAL IS THE EXCLUSIVE PROPERTY OF PT. SURYA SAKTI SUKSES

    FMP-10/03 // Rev 2 // 17-01-2017 Page 14 of 20


    DIMENSIONAL INSPECTION REPORT
    JOB NO : PART NAME : ROTOR TRB TO DIAPHRAGM
    CUSTOMER : PT. WIJAYA TRI UTAMA P.I ROTATION : N/A
    OEM : N/A TAG NUMBER : N/A
    EQUIPMENT : N/A QUANTITY : N/A

    STATUS : AS RECEIVED ✘ FINAL SURFACE : RADIAL ✘ AXIAL UNITS : ✘ MILLIMETERS INCHES

    STAGE LEFT RIGHT


    1 2.20 2.40 1.80 - 2.20
    2 2.50 2.55 1.80 - 2.20
    3 2.55 2.55 1.80 - 2.20
    4 2.80 2.85 2.30 - 2.70
    5 2.70 3.05 2.30 - 2.70
    6 3.40 3.35 2.80 - 3.20
    7 3.40 3.35 2.80 - 3.20

    PREPARED BY : CHECKED & APPROVED BY : CUSTOMER BY :

    DATE : DATE : DATE :

    THIS MATERIAL IS THE EXCLUSIVE PROPERTY OF PT. SURYA SAKTI SUKSES

    FMP-10/03 // Rev 2 // 17-01-2017 Page 15 of 20


    DIMENSIONAL INSPECTION REPORT
    JOB NO : PART NAME : CURTIS #1 & #2
    CUSTOMER : PT. WIJAYA TRI UTAMA P.I ROTATION : N/A
    OEM : N/A TAG NUMBER : N/A
    EQUIPMENT : N/A QUANTITY : N/A

    STATUS : AS RECEIVED FINAL SURFACE : RADIAL AXIAL UNITS : MILLIMETERS INCHES

    ROTOR

    LP SIDE HP SIDE

    CURTIS #1 CURTIS #2
    Bottom

    Bottom
    POS

    Right

    Right
    Left

    Left
    Top

    Top

    A 2.50 2.50 3.20 3.40


    B 3.30 3.30 2.90 2.90
    C 3.50 3.50 3.50 3.40
    D 3.00 3.00 3.80 3.80
    E 0.90 1.20 >2.0 >2.0 1.50 1.40 >2.0 >2.0
    F 1.00 1.20 >2.0 >2.0 1.35 1.50 >2.0 >2.0
    G 1.50 1.35 1.80 >2.0 1.35 1.40 >2.0 >2.0

    PREPARED BY : CHECKED & APPROVED BY : CUSTOMER BY :

    DATE : DATE : DATE :

    THIS MATERIAL IS THE EXCLUSIVE PROPERTY OF PT. SURYA SAKTI SUKSES

    AS RECEIVED FINAL RADIAL AXIAL MILLIMETERS INCHES


    FMP-10/03 // Rev 2 // 17-01-2017 Page 16 of 20
    DIMENSIONAL INSPECTION REPORT
    JOB NO : PART NAME : N/A
    CUSTOMER : PT. WIJAYA TRI UTAMA P.I ROTATION : N/A
    OEM : N/A TAG NUMBER : N/A
    EQUIPMENT : N/A QUANTITY : N/A

    PHOTOGRAPH

    Contact Bearing #1 Contact Bearing #2

    Bedding Contact Bearing #1 Bedding Contact Bearing #2

    PREPARED BY : CHECKED & APPROVED BY : CUSTOMER BY :

    DATE : DATE : DATE :

    FMP-10/03 // Rev 2 // 17-01-2017 Page 17 of 20


    THIS MATERIAL IS THE EXCLUSIVE PROPERTY OF PT. SURYA SAKTI SUKSES

    DIMENSIONAL INSPECTION REPORT


    JOB NO : PART NAME : N/A
    CUSTOMER : PT. WIJAYA TRI UTAMA P.I ROTATION : N/A
    OEM : N/A TAG NUMBER : N/A
    EQUIPMENT : N/A QUANTITY : N/A

    PHOTOGRAPH

    Contact Check Governor Valve

    PREPARED BY : CHECKED & APPROVED BY : CUSTOMER BY :

    DATE : DATE : DATE :


    FMP-10/03 // Rev 2 // 17-01-2017 Page 18 of 20
    THIS MATERIAL IS THE EXCLUSIVE PROPERTY OF PT. SURYA SAKTI SUKSES

    DIMENSIONAL INSPECTION REPORT


    JOB NO : PART NAME : N/A
    CUSTOMER : PT. WIJAYA TRI UTAMA P.I ROTATION : N/A
    OEM : N/A TAG NUMBER : N/A
    EQUIPMENT : N/A QUANTITY : N/A

    PHOTOGRAPH

    Contact Check Governor Valve

    Hasil Akhir Oil Flushing

    PREPARED BY : CHECKED & APPROVED BY : CUSTOMER BY :

    FMP-10/03 // Rev 2 // 17-01-2017 Page 19 of 20


    DATE : DATE : DATE :

    THIS MATERIAL IS THE EXCLUSIVE PROPERTY OF PT. SURYA SAKTI SUKSES

    FMP-10/03 // Rev 2 // 17-01-2017 Page 20 of 20

    You might also like