Professional Documents
Culture Documents
Ife Digital
Ife Digital
Doug Downey
Digital printing is one of the fastest-growing segments of the sign industry. Its progress
can be seen in the incredible size of what can now be produced. Whatever the message
or product, size has become a major trend in advertising. Today, one sees huge digital
prints wrapped on the glass fronts of office buildings, and massive digitally printed
banners draped down the sides of buildings. The automotive industry has also become
a part of the digital advertising world, with vans, cars, buses, and trailers fully wrapped
with digital prints.
Digital printing 1
Digital cameras
The digital camera can be an important tool for the digital designer. If you catch the
right action shot with a high-resolution camera, you can easily create a background
image.
Figure 1
When you start your design, you need to consider the size of the final output. I design
my digital artwork at half the final size and at 300 dpi. This setup produces a good-
quality print when the image is produced at full size. I have designed this project for a
10 × 20 foot billboard. Because this sign is going to be displayed off the road and in a
field, which means that it will not be viewed close up, the digital print will work at a
very low resolution, such as 10 dpi. Up close, the digital print will seem to be of poor
quality, but at 100 feet off the road, a top-quality billboard will be seen.
Figure 2
Another tip or trick that I often use is to make a duplicate of the original photo and add
a motion blur (Effects ` Blur ` Motion Blur). Now, placing the original photo on top
and using the Interactive Object Transparency tool, I blended both the original and
duplicate photos together, resulting in a high-quality picture for digital printing (see
Figure 3).
Figure 3
Digital printing 3
This prep work creates a suitable image for digital print to which copy or text can be
added. Choosing the right copy is an important part of any sign, whether or not it is
printed. Highway billboards, which viewers have only a few seconds to read, need to be
kept simple. For this sign, the copy would include the contractor’s name, what the
company does, and some contact information. Starting with the main copy, which is the
contractor’s name, I chose a new serif font that was created by a sign font supplier. The
font is tall and thin, and I chose to make it larger so that it would be better seen from
a distance.
I chose white for the main copy and created a mask of the text (Mask ` Create ` Mask
from objects). Then, I added a 3D effect to create an extra dimension on the lettering
(Effects ` 3D effects ` Bevel effect) (see Figure 4).
Figure 4
Building on this effect, I copied the same text layer on top, changed the color to light
green, and made the top of the second layer transparent by using the Interactive Object
Transparency tool. Then, I added a small interactive drop shadow to the outside of the
original text to create even more depth (see Figure 5).
Figure 5
Figure 6
I chose a heavier font for the bottom panel, making it a contrasting color to the
background so that it could be read from a distance. Visibility and contrast are an
important part of the designs I create. Why do a design if you can’t read it? I use the
lighter color for the most important copy on a darker background or vice versa,
depending on the color selected. With this bold font, I again added the interactive drop
shadow to give depth and impact to the message (see Figure 7).
Figure 7
Digital printing 5
For the line of copy at the top of the sign, I chose a sign painter’s font in a nice flowing
script to add a classy touch. The copy on this line is not as important as the name and
phone number, so I used a color with a little less contrast. The information is there, but
the words do not overpower the name of the company. Keeping with the theme of the
lettering, I added the drop shadow around the text to add depth to the sign (see
Figure 8).
Figure 8
I had been saving the design in the raw Corel PHOTO-PAINT file format (.cpt). The
output devices do not use this format, however, so I needed to size up the design to the
full size first and then export it as a TIFF file (.eps). Many designers would send the file
as a JPG, but that format entails a loss of image information. I chose TIFF because it is
the leading commercial and professional image standard and is supported across all
platforms, including Mac®, Windows®, and UNIX®. Now the file could be sent to
the printer, directly to an in-house printer, or to an industry supplier.
Digital printing 7
About the author
Doug Downey, owner of Creativeink Design
Group, has been designing for more than 25
years. Doug got his start in the sign industry
when he established his own design and sign
shop. After selling his sign shop, he moved to
the Niagara Falls area and worked for a sign
company, where he designed all of the digital
printing for a local casino. In 2000, Doug
ventured back to Stratford to open up a Web
and digital design company. Doug has been
designing in CorelDRAW since the first
version and was the winner of the 1999
CorelWORLD™ Design Competition. Doug
now travels and speaks about large-format
printing and about the fundamentals of design
for beginner designers. You can view
Creativeinks design work online
(www.creativeink.ca).