K P S R S: EY Roduct Upply Eferences and Napshots

KEY PRODUCT SUPPLY
REFERENCES AND SNAPSHOTS
…… many more
Dual Plate Checks
2” to 80”. Up to ASME 2500 & API 6A, -196 oC to 900 oC
Wafer, Lugged, Flanged, Butt weld, Jacketed , API 594, 598 & 6D, BS 6364, API 6FA
Axial Check Valves

1” to 64”, Up to ASME 1500, -196 oC to 300 oC
Testing as per API 598, Double Flanged
Triple Eccentric Metal Seated Butterfly

Product Range Wafer, Lugged, Flanged, Butt weld, Jacketed ,
API 609 & 598, 607, BS 6364
High Performance Soft Seated Butterfly

Wafer, Lugged, Flanged, API 609 & 598
‘Fit n Forget’ Butterfly integrally molded liner

Wafer, Lugged, Double Flanged , API 609 & 598
Motor Operated Valves (MOV)
Actuator Makes : Rotork, Auma, Limitorque, Bernard…
Power Supply : 3 – Phase / Single Phase, 50 HZ / 60 HZ
Control Signal : MODBUS, Fieldbus / Profibus, Hard contacts etc.
On-Off type of Valves -Pneumatic Actuator

Actuator Makes : Rotork, Biffi, Rotex…
Type of Actuators : Single / Double acting
Max Air Supply : 10 kg/cm2
Accessories : Solenoid Valves, Air Filter Regulator, Limit
Switches, Positioners etc.
Actuated Valves
Range Valves with Electro-Hydraulic Actuators
Actuator Makes : Rotork, Leden…
Power Supply : 3- Phase/Single Phase, 50 HZ/60 HZ
Control Signal : MODBUS Serial/Foundation, Fieldbus/Profibus,
Hard contacts etc.
Control Valves with Pneumatic Actuator

Actuator Makes : Rotork, Biffi, Rotex…
Type of Actuators : Single acting / Double acting
Max Air Supply : 10 Kg/cm2g
Accessories : Pneumatic/Electro-Pneumatic Positioner, Solenoid valve,
Limit Switches etc.
Triple Offset Butterfly Valves
66” 1650mm, ANSI #150

Carbon Steel / Stainless
Steel
Completely site replaceable
seat & seal
Supplied to:
SATORP
Saudi Aramco & TOTAL JV
Jubail Export Refinery
Through SK Engineering
02/13
Range: 3” to 100” ANSI #900

Standards: API 609 & 598, 607, ISO 10497, 15848, BS 6364
Inconel Trim for Sour Service
48” & 54”, # 150, LCC Valve with Inc 718 shaft + Inc 625 seating
GASCO – Habshan Flare Gas Recovery Project through CCC
Selected as a superior alternate to Ball Valves
03/13

64”, 76”, 88”

ANSI #150
WCB/WCB
Supplied to:
IOCL Paradeep
Refinery Project,
Essar Projects
PMC – Foster
Wheeler
08/14

36” Supplied 5 pieces to:

Pluto Train 2,
EPC –
Bechtel
ANSI #900 Western Australia End User -
LC/LCC Project Woodside
11/22

Long Pattern – Gate Valve face to face
Up to 48” in CS/SS material for Sour and Non-sour services in

INDMAX, CCU, VDU, VDO, Process at IOCL, Paradeep.
Supplied through Essar, Uhde, Toyo
03/13

Long Face-to-Face Flanged as per API 609 Cat B, Table 3B
Long Pattern – Double Flanged
16”-32” Stainless
Steel material
for Sour Service
at Mangalore PTA
plant supplied
through Technip
Range:
16”-32” #150-#300
Long face-to-face
Flanged end
connections
Standard : API 609

cat.B, API 598

Triple Offset Metal Seated Butterfly Valves - MOV
76” 1900mm, ANSI #150
Carbon Steel / Stainless
Steel
Completely site replaceable
seat & seal
IQ Bernard Controls
Supplied 68” & 76” to:

SATORP
Saudi Aramco & TOTAL JV
Through Technip
Flare Gas Service
06/12

18” Model 51
Special Pneumatic Actuator, Supplied to:
Extended Double Flanged Indian Oil Corporation Ltd.
Range : Up to 120” #150

Standards: API 609 & API 598
14” & 16”

#150
CF8/CF8
Specialized for
LNG & Cryo Services
Supplied to Sopan O&M

PMC (Engineers India Limited)
Range : Up to 120” #150

Long Pattern TOVs, 16”, 36”, 44” and 48”

Through BHEL, IOCL Paradeep SRU Project
03 / 22
06/12
Range : Up to 48” #150

ESD (On / Off) – Triple Offset Butterfly Valves
72” 1800mm, PN 6
Fabricated Valve Body
Carbon Steel Disc &
Stainless Steel Trims
Pneumatic operated
for ESD
closing time < 3 sec
Bhushan Steel
Blast Furnace Flame Gas
(2007)
06/12

Remote Operated Shut-off Butterfly Valves
More than 200

valves supplied to
Indian Oil
Corporation Limited
(IOCL)
Marketing Terminals across India
Size Range: Upto 3” to 28” incl #300,
MOC: WCB
Pneumatic Actuators
Electro Hydraulic Actuators
11/14

Standards: API 609, SIL 3 (IEC 16508)
Double Flanged Long Pattern
High Performance Triple Eccentric Butterfly Valve
Access Door Design for LNG
12” # 300
Tested at Cryo
temperatures of -196°C.
Long pattern,
with butt weld-ends.
This access feature

allows easy replacement
of seal and seat

Cryogenic Triple Offset Butterfly Valves
for Low Temperature Service to EIL
36” #150
Supplied to
GAIL PATA India
Tested at -450C
Internal Cryogenic
Testing Facilities
as per EIL spec
(in line with BS 6364)
with Helium as test medium,
and Liquid Nitrogen as
cooling agent.
09/14

20” #900
Part of Supplies to
Chevron Phillips
Chemical (CPChem)
US Gulf Coast Project
Tested at -196 ˚C (-320 ˚F)
in-house Cryo testing capability

for valve sizes up to 60”
with High Pressure Helium as test medium,
Liquid Nitrogen as cooling agent.
04/16

Standards: API 609 & 598, 607, ISO 10497, 15848, 28921
36” #150
Complete
Stainless Steel
(Also covered up to
42” #300 & 20” #900)
Chevron Phillips
Chemical
(CPChem)
Project, US
Tested at -196 ˚C
(-320 F)
05/16

Standards: API 609 & 598, 607, ISO 10497, 15848, 28921
Cryogenic Dual Plate Check Valves
Shell DVT Qualified
36” #900
CF8M / CF3M
Tested at -196 ˚C
(-320 F)
Supplied to :
Sakhalin Energy Investment

Company Ltd.
Year : 2018-19
Project :
Compressor Station At
The Onshore Processing Facility
In The Sakhalin Island. Of The
Russian Federation
EPC : Petrofac
11 / 19

Standards: API 594 & 598, 607, ISO 28921
Cryogenic Dual Plate Check Valves
42” 1050 mm
# 300
Supplied to:
JGC
Project :
LNG CANADA
End User :
Shell,
Petronas,
Kogas
08/21
06/12
Standards: API 594, 598 & 6D, BS 6364, CE
Wafer, Lugged, Flanged, Butt weld, Jacketed
Triple Offset Actuated Butterfly Valves
Range from 4” – 42” #150, #300, #600
(Manual and Actuated, Tested at -196 ˚C (-320 F)
More than 250 Valves in Actuated and Manual each

Amursky Gas PP to Gazprom & Nipigaz through Linde, Germany
5 Phase project for Natural and Helium Gas Separation (LNG)
Special Valve Design, both solid seat for Cryo temperature and higher Coefficient Value
03/19

Pneumatic – Cryo Triple Offset Butterfly Valves
12” #300, 14” #600, 8” #900 Stainless Steel Cryogenic

Pneumatic Fail Safe Actuated
Pemex Mexico through Techint (2005)
03/13

Triple Offset Control Actuated Valves
28” # 300
Carbon Steel Valve
36” line size
Pneumatic Actuator
Cairn Energy
Bhogat Terminal
Through IOT.
03/13

Dual Plate Check Valves
(14” & 18” specially designed for Reliance Jamnagar Refinery)
14” – 18” (ANSI # 1500)

were designed with
specially customized
face to face and flanges
to perform in extremely critical
conditions at refinery.
Supplied to
Reliance Jamnagar Refinery
03/13

Standards: API 594, 598 & 6D, BS 6364, API 6FA
Size Range: Upto 50” # 150,
#300 & #600 also
MOC: WCB / CA – 15
Project: Angola LNG
EPC: Bechtel
Project Location: Angola
Client: Angola LNG - Chevron

03/13

Dual Plate Metal Seated Check Valves
CRYOGENIC TESTING in PROCESS
36” 900mm, ANSI #300
Stainless Steel
Supplied to:
GASCO, For 4th NGL Project through GS Petrofac JV
06/12

Dual Plate Check Valves Cryogenic Hub End
Bechtel USA
Chenniere LNG
Regasification
Terminal (2006)
Size: 8” & 10” # 900

Project: Sabine Pass LNG
MOC: CF8M / CF8M
03/13

Special Hub-ended Dual Plate Check Valves
2” to 10” ANSI #2500

Metallurgy consisted Duplex
4A, LCC
CE certified
Supplied to:
South Arne Off-shore project
in the North Sea, through
Dragados, Spain
and
KBR, UK
07/12

Standards: API 594, API 6D, Cryo
CE certified
20” - 48”
# 150
SGI/AB2
Sea Water
Offsite utilities
Supplied to
IOCL
Paradeep
through
Kazstroy
03/13

36” #600 & 48” #600

CF8M / LCB
Cryo & Low

Temperature Service
Supplied to
CB&I / Zachry
via
MRC & Sunbelt
Project :
Freeport LNG
12/16

Hub End Design with High Pressure & Inconel Cladding
ANSI #2500 C12/INC 625 14”-18”

Hub End Design
DPCV 12” 2500# LTCS + INC 625
Cladding With HPGT (N2) testing
Supplied to:
NPCC/ ADMA-OPCO – Umm Lulu Full Field
Development Project, UAE
08/15

Standards: API 594, API 6D, Cryo
CE certified
66”& 56”
#150
Supplied to
Petronas for
RAPID Project
through
Technip and
Fluor

68” #300
LCB/LCB/Stellite seats
Low Temperature Service
Butt-weld with Pup-piece
Supplied to
CB&I / Zachry
via
Sunbelt
Project : Freeport LNG
06/2017

60”#300
Supplied to :
Samsung Engineering
Co. Ltd.
Project :
RAPID Package
11 EO/EG
End User: Petronas
MOC : WCB/CA15
09/2017

Dual Plate Axial Check Valves
12”& 8”#150
AB2, PN10,
Monel 400
Welding
Supplied to
NFE2 LNG
Project through
Fluor

UL Certified Butterfly Valves
24’’ & 36”

#150
Supplied to:
CCC / Vijay Arabia
Project :
HIA’s multi-
phased expansion
QATAR Project
End User :
MATAR
03 / 22
06/12
Range : Upto 48” #150

Butterfly Concentric Soft Seated Valves
20” and 24” ANSI #150

UL Certified with
Extension 5m.
Ductile Iron
Supplied to:
SATORP
Saudi Aramco &
TOTAL JV
Through
Technip
06/12

UL Approved with extension up to 5m
400mm Double Flanged Concentric Butterfly Valves
(Supplied to Reliance Jamnagar Refinery)
Butterfly Valve
2” to 24”
ANSI #150
API 609 Cat A
Integrally
vulcanized liner
Available in all
materials
Face-to-face per
API 609 Cat B to
accommodate
ASME B16.5
flanges
02/13

Standards: API 609, API 598
Flanged End Connections
Double Offset Butterfly Valves
80” 2000mm
ANSI #150
Supplied to:
EIL –
Engineers
India Limited
MRPL &
BPCL Kochi
Refineries
06/12
06/12

Double Offset Butterfly Valves
96” 2400mm
PN 10 #150
Supplied to:
Dangote
Refinery
Lagos,
Nigeria
06/21
06/12
Range: Upto 120” PN 10 #150

Butterfly Valves (Soft Seat & Int. Lined)
88” & 104” #150
LCC Body & SS Disc
With 2.5m extension for
buried service
Supplied to:
Tecnimont, Italy
Project :
Amur Gas Chemical
Complex (AGCC),
Russia
End User :
Amur GCC, LLC
04 / 22
06/12
Range : Up to 120” #150

Advance Triple Offset Valves are now Shell DVT Qualified!
Advance Valves is proud
Shell EFA Supplier
Dual Plate Checks

& Rubber Lined
Butterfly Valves
also qualified
06/21
06/12
Range: Upto 100” #900, #1500 upto 12”

Standards: API 609, Shell MESC
Pneumatic Actuated Butterfly Valve
30” 750mm #300
Supplied to:
ION Exchange
India Ltd.
Project :
Cairn Barmer
Sulphur Removal
Plant
End User :
Cairn Barmer
08/21
06/12
Range : Upto 48” #150


K P S R S: EY Roduct Upply Eferences and Napshots

Uploaded by

Copyright:

Available Formats

K P S R S: EY Roduct Upply Eferences and Napshots

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

K P S R S: EY Roduct Upply Eferences and Napshots

Uploaded by

Copyright:

Available Formats

KEY PRODUCT SUPPLY

REFERENCES AND SNAPSHOTS

Axial Check Valves

Triple Eccentric Metal Seated Butterfly

High Performance Soft Seated Butterfly

‘Fit n Forget’ Butterfly integrally molded liner

On-Off type of Valves -Pneumatic Actuator

Control Valves with Pneumatic Actuator

66” 1650mm, ANSI #150

Range: 3” to 100” ANSI #900

Range: 3” to 100” ANSI #900

64”, 76”, 88”

Range: 3” to 100” ANSI #900

36” Supplied 5 pieces to:

Range: 3” to 100” ANSI #900

Up to 48” in CS/SS material for Sour and Non-sour services in

Range: 3” to 48” ANSI #600

Standard : API 609

Range: 3” to 48” ANSI #600

Supplied 68” & 76” to:

Range: 3” to 100” ANSI #900

Range : Up to 120” #150

14” & 16”

Supplied to Sopan O&M

Range : Up to 120” #150

Long Pattern TOVs, 16”, 36”, 44” and 48”

Range : Up to 48” #150

Range: 3” to 100” ANSI #900

More than 200

Range: 2” to 100” ANSI #900

This access feature

Range: 3” to 48” ANSI #600

Range: 3” to 100” ANSI #900

in-house Cryo testing capability

Range: 3” to 100” ANSI #900

Range: 3” to 100” ANSI #900

Sakhalin Energy Investment

Range: 2” to 48” ANSI #2500

More than 250 Valves in Actuated and Manual each

Range: 3” to 100” ANSI #900

12” #300, 14” #600, 8” #900 Stainless Steel Cryogenic

Range: 3” to 100” ANSI #900

Range: 3” to 100” ANSI #900

14” – 18” (ANSI # 1500)

Range: 2” to 80” ANSI #2500

Size Range: Upto 50” # 150,

#300 & #600 also

Project: Angola LNG

Project Location: Angola

Client: Angola LNG - Chevron

Range: 2” to 80” ANSI #2500

36” 900mm, ANSI #300

Range: 2” to 80” ANSI #2500

Size: 8” & 10” # 900

Range: 2” to 80” ANSI #2500

2” to 10” ANSI #2500

Range: 2” to 80” ANSI #2500

Range: 2” to 80” ANSI #2500

36” #600 & 48” #600