Professional Documents
Culture Documents
Welder Certificate
Welder Certificate
Manual or Semi automatic Variables for Each Process Actual Value Range Qualified
(QW-350)
Backing (metal, weld metal, welded from both sides, NONE NONE
flux, etc.) (QW-402)
ASME P-No (QW-403) P No. 1 to P No. 1 P No. - P No.11/P No.4X
Plate Pipe (enter diameter, if pipe) NPS Ø 2" NPS Ø 2 ½" & OVER
Filler Metal Specification
SFA No. SFA - 5.18 SFA - 5.18
AWS Classification (QW-404) ER. 70 S G ALL CLASSES IN ABOVE SPEC
F-No. F-No.6 / F-No.4 F-No.6 / F-No 1 - 4
Consumable Insert for (GTAW) N/A N/A
Weld Deposit Thickness for each
Welding Process (GTAW) 3.91 mm 7.82 mm
(SMAW) - -
Welding Position (QW-405) 6 (Six) G ALL
Progression (uphill / downhill) UPHILL UPHILL
Backing Gas for GTAW (QW-408) YES (ARGON 99.9%) YES / NO
GMAW Transfer Mode (QW-409) N/A N/A
Electrical Characteristic (QW-409)
Current DC DC
Polarity STRAIGHT POLARITY (GTAW) STRAIGHT POLARITY (GTAW)
- -
We certify that the statements in this record are correct and that the test welds were prepared, welded and tested in
Accordance with the requirements of section IX of the ASME Code.
C:\Data CAP\Form\Welder\Pug