Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 35 views

    Tornillo Hexagonal P-B Con Ara Neo 10 X 2

    Uploaded by

    Miguel Rubio
    This certificate confirms that a batch of self-drilling screws met specifications for chemical composition, dimensions, mechanical properties, and performance. Raw material analysis and tests of surface finish, dimensions, hardness, strength and drilling ability were conducted on samples from the batch according to various standards. The batch was certified as meeting all requirements.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Tornillo Hexagonal P-B Con Ara Neo 10 X 2

    Uploaded by

    Miguel Rubio
    35 views1 page
    This certificate confirms that a batch of self-drilling screws met specifications for chemical composition, dimensions, mechanical properties, and performance. Raw material analysis and tests of surface finish, dimensions, hardness, strength and drilling ability were conducted on samples from the batch according to various standards. The batch was certified as meeting all requirements.

    Original Title

    TORNILLO HEXAGONAL P-B CON ARA NEO 10 X 2

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This certificate confirms that a batch of self-drilling screws met specifications for chemical composition, dimensions, mechanical properties, and performance. Raw material analysis and tests of surface finish, dimensions, hardness, strength and drilling ability were conducted on samples from the batch according to various standards. The batch was certified as meeting all requirements.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    35 views1 page

    Tornillo Hexagonal P-B Con Ara Neo 10 X 2

    Uploaded by

    Miguel Rubio
    This certificate confirms that a batch of self-drilling screws met specifications for chemical composition, dimensions, mechanical properties, and performance. Raw material analysis and tests of surface finish, dimensions, hardness, strength and drilling ability were conducted on samples from the batch according to various standards. The batch was certified as meeting all requirements.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    HISENER INDUSTRIAL CO.

    , LTD
    MILL TEST CERTIFICATION
    Certification Conforms to EN10204 3.1
    Supplier: HISENER INDUSTRIAL CO., LTD Certificate No.: MTC19030460814009
    Buyer: TORNIRAP SAS Invoice No.: 19HS03046F

    Product Description: SELF-DRILLING SCREW HEX WASHER HEAD TYPE BSD THREAD DRILL POINT WITH OD 14MM BONDED
    WASHER
    Product Size: 10 X 2 Shipped Q'ty: 52.500 MPCS
    Quality Acceptance: ASME B18.18/ASTM F1470 Lot No.: L19030460621009

    RAW MATERIAL C1022A Heat No.: XJ170928635


    Element C Si Mn S P Ni Cr Cu
    Spec. 0.17 ~ 0.23 max 0.15 0.7 ~ 1.0 max 0.025 max 0.030

    Result 0.20 1.0 0.8 0.01 0.015

    SURFACE & THREAD


    Test Item Spec. Standard Remark Test Item Spec. Standard Remark
    Appearance Flawless / OK Go gauge / OK
    ASME B18.6.4
    Coating ZP Cr3 ASTM F1941 OK NO Go gauge / OK

    DIMENSION MEASUREMENT(UNIT: MM) According to : ASME B18.6.4

    Test Item Spec. Sampling Remark NOTE

    MAJOR DIAMETER (D) 5.31 ~ 5.46 80 OK

    LENGTH(L) 48.8 ~ 50.8 80 OK

    PITCH OF THREAD (P) 1.6 80 OK

    WIDTH ACROSS FLATS (s) 7.75 ~ 7.92 80 OK

    WIDTH ACROSS CORNERS (e) 8.71 min 80 OK

    HEIGHT OF HEAD (k) 3.9 ~ 4.1 80 OK

    WASHER/FLANGE THICKNESS (U) 1.00 ~ 1.20 80 OK

    WASHER/FLANGE DIAMETER (DW) 10.00 ~ 11.00 80 OK

    DRILL KNIFE DIAMETER (Dp) 4.37 ~ 4.50 80 OK

    LENGTH OF DRILL KNIFE (t) 5.10 ~ 8.50 80 OK

    MACHANICAL PROPERTIES According to : SAE J78

    Test Item Spec. Sampling Remark NOTE

    SURFACE HARDNESS(HV/HRC) 50 ~ 56 HRC 8 OK

    CORE HARDNESS (HV/HRC) 32 ~ 40 HRC 8 OK

    CASE DEPTH (mm) 0.00 ~ 0.01 in 8 OK

    BROKEN TORQUE (N*m/Lb*ft) min 61.0 Lb-in 8 OK

    DRILL AND SCREW-IN TEST (s) max 4 sec 25 OK

    We hereby certify that all the above material were manufactured , sampled, tested, and inspected in accordance with the relevant specification and
    any supplementary requirements or other requirements designated in the purchase order and was found to meet those requirements.

    Inspector: QC Inspc. Date: 2019.08.14

    You might also like