G3Smart PLC
G3Smart PLC
G3Smart PLC
Input memory 2048 bytes 4096 bytes Analog signal 8 channels, to support (0~10) mA, (4~20) mA ,
AO3208-S01 output module (0~20) mA, and unified isolation
Output memory 2048 bytes 4096 bytes
6 channels, to support resistance (1~400)Ω:
Hot plug Support Thermal resistance (1~500)Ω, (2~1000)Ω:
AI3206RTD-S01
detection module (2~1250)Ω, channel-to-channel isolation
Communication
protocol UCP/Modbus TCP
Serial 4-way RS485 interface, to support Modbus RTU
Interface type 2-way RJ45 interface COM3204RTU-S01 communication master-slave communication and self-
module defined protocols
Ethernet
Transmission 10M/100M, self-adaptive
Communi rate(Baud Rate)
cation Digital signal 16 channels, to support active or passive contact
DI3216-S01 input module signal input and unified isolation
function Network AB dual-network
Ring network
redundancy redundancy
Digital signal 16 channels, to support transistor output and
DO3216-S01 output module
2 ways, 6 terminals, support self-defined unified isolation
Serial port Rs485 interface protocol, Modbus master-slave protocol,
support 64 slave nodes to access Communication module
Rack
Storage temperature -40~85℃ Rack (10 slots) Support installation of up to 10 modules and can
CN3210-S01
be used as a local rack or a remote rack.
Humidity 5%~95%RH, no condensation
Rack (6 slots) Support installation of up to 6 modules and can
CN3206-S01
Working altitude Below 4000m be used as a local rack or a remote rack
G3Smart
Programmable Logic Control System
G3Smart Powerful network interconnectivity
Support star, daisy chain, ring network and other network topologies
SNTP Protocol
Server
G3Smart
SCNET
High environmental adaptability
Modbus-TCP Switch Group
Protocol
Industrial-grade components, support the working range of full-temperature
G3Smart
Programmable Logic Control System zone, corrosive gases protection
TCP Device
Modbus-RTU
Compact design Protocol
G5Pro controller for remote extension, contributing to a high cost-performance ratio. Support three remote IO network topologies: daisy chain, star, and ring types, effective design of an entire system.
It is widely applied in the process industries, including petrochemical, fine chemical, providing more flexible for engineering application design.
Flexible and diverse control functions Daisy chain network Star network
Support FBD, LD, ST, SFC programming languages compliant with IEC 61131-3 IM3202RJ IM3202RJ
standard and simple communication configuration, making configuration more
efficient
Note: The modules in grey in the local rack can be TCP, PN modules or dummy
remote rack
modules.
Ring network