12 Eaton - CAP320 - CAPT340 - CAH330 - DS - Sep17

Eaton Product Datasheet Sensors
Intelligent Addressable Fire Products Eaton’s Cooper Intelligent Addressable Sensors
CAP320, CAPT340, CAH330

Eaton’s Cooper Intelligent addressable sensors
This range of intelligent addressable sensors have been The heat sensor (CAH330) can be set to one of 3
specifically designed to operate with Eaton’s Cooper modes 77ºC / 92ºC and rate of rise. These sensors are
intelligent addressable fire systems. designed to be used in environments where the ambient
conditions might cause false alarms if smoke detection
All sensors are third party approved to the relevant were to be used, for example where there is a high
section of EN54 (part 7 for smoke detectors & part 5 for level of dust, fumes, steam or smoke under normal
heat detectors). conditions.
The optical sensor (CAP320) is suitable for most Features

applications giving the fastest response to slow burning • Soft addressed
or smouldering fires which give rise to large visible • Integral short circuit isolator
smoke particles. • Single address
• Wide range of sensor types
The photo-thermal sensor (CAPT340) will respond • 360° visibility LED using lightpipe technology
quickly to fast clean burning fires yet maintain • Drift compensation
the advantage of optical sensors when detecting • Aesthetically pleasing
smouldering fires. The thermal enhancement of this
sensor allows a higher alarm threshold which provides a Benefits
greater rejection of false alarms. The sensor will also • Quick and simple to install
raise an alarm at temperatures exceeding 60ºC.
• Single “multi-mode” heat sensor
The CAPT340 has day/night modes available, • Wide viewing angle for increased LED visibility
programmeable from the site installer software. The day • Common mounting base
mode uses the heat aspect of the sensor for areas which • Positive “lock” indication
may have smoky environments during, for example
• Discreet design for incorporation into any decor
working hours. The night mode uses a combination
of A2S and smoke detection. If not programmed, the • Easy to maintain/service
sensor defaults to dual mode.
Eaton Product Datasheet Sensors
Intelligent Addressable Fire Products Eaton’s Cooper Intelligent Addressable Sensors
Technical Specification
Code CAP320 CAPT340 CAH330
Description Optical Smoke Sensor Photo-Thermal Sensor Multi-Mode Heat Sensor
Standards EN54 Pt7 2000 + A1:2002, EN54 Pt17 EN54 Pt5 2000 + A1:2002, EN54 Pt7 2000 + A1:2002, EN54 Pt 17 EN54 Pt5 2000 + A1:2002, EN54 Pt17
Operating volatage 18V dc to 30V dc 18V dc to 30V dc 18V dc to 30V dc
Standby current 220μA (max) 220μA (max) 220μA (max)
Alarm current 5mA (max) 5mA (max) 5mA (max)
Addressing Mode Auto address Auto address Auto address
Specification
Mounting position Ceiling in open areas Ceiling in open areas Ceiling in open areas
Mounting options Surface mount with CAB300 base Surface mount with CAB300 base Surface mount with CAB300 base
Area coverage 100m² (subject to local standard) 100m² (subject to local standard) 100m² (subject to local standard)
System wiring Min. 1.5mm, 2 core loop or spur Min. 1.5mm, 2 core loop or spur Min. 1.5mm, 2 core loop or spur
Heat Class
Rate of Rise N/A A1S A1R
Fixed Heat 77ºC N/A N/A BS
Fixed Heat 90ºC N/A N/A CS
Alarm Temperature (static)
AIR N/A 60ºC 60ºC
BS N/A N/A 77ºC
CS N/A N/A 90ºC
Indication 360° visibility light pipe 360° visibility light pipe 360° visibility light pipe
Environmental
Operating temperature -10°C to +60°C -10°C to +50°C -10°C to +60°C
Humidity (non condensing) 0 to 95% RH 0 to 95% RH 0 to 95% RH
Physical
Construction PC/ABS PC/ABS PC/ABS
Colour - Ral No. White - 9003 White - 9003 White - 9003
Dimensions Excel Base (Dia x D) 101mm x 33mm 101mm x 43mm 101mm x 43mm
Dimensions Incl Base (Dia x D) 104mm x 45mm 104mm x 55m 104mm x 55mm
Weight (without base) 76g 76g 76g
IP Rating IP30 IP30 IP30
Compatibility
Suitable for use with Cooper Intelligent Addressable Fire SystemsCooper Intelligent Addressable Fire Systems Cooper Intelligent Addressable Fire Systems
Dimensions D (mm) D1 (mm) Catalogue numbers

Description Dia (mm) (excl base) (incl base) Description Code
Optical 101 33 45 Optical Smoke Sensor CAP320
Photo-Thermal 101 43 55 Photo/Thermal Sensor CAPT340
Multi-Mode Heat 101 43 55 Multi-Mode Heat Sensor CAH330

Standard Base CAB300
Conventional Remote Indicator CIR301
Duct Probe (requires detector & MDP201
base)
Loop connected remote indicator MRIAD

12 Eaton - CAP320 - CAPT340 - CAH330 - DS - Sep17

Uploaded by

Copyright:

Available Formats

12 Eaton - CAP320 - CAPT340 - CAH330 - DS - Sep17

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

12 Eaton - CAP320 - CAPT340 - CAH330 - DS - Sep17

Uploaded by

Copyright:

Available Formats

Eaton Product Datasheet Sensors

Intelligent Addressable Fire Products Eaton’s Cooper Intelligent Addressable Sensors

CAP320, CAPT340, CAH330

The optical sensor (CAP320) is suitable for most Features

Operating volatage 18V dc to 30V dc 18V dc to 30V dc 18V dc to 30V dc

Standby current 220μA (max) 220μA (max) 220μA (max)

Alarm current 5mA (max) 5mA (max) 5mA (max)

Addressing Mode Auto address Auto address Auto address

Rate of Rise N/A A1S A1R

Fixed Heat 77ºC N/A N/A BS

Fixed Heat 90ºC N/A N/A CS

Alarm Temperature (static)

AIR N/A 60ºC 60ºC

BS N/A N/A 77ºC

CS N/A N/A 90ºC

Operating temperature -10°C to +60°C -10°C to +50°C -10°C to +60°C

Humidity (non condensing) 0 to 95% RH 0 to 95% RH 0 to 95% RH

Construction PC/ABS PC/ABS PC/ABS

Colour - Ral No. White - 9003 White - 9003 White - 9003

Weight (without base) 76g 76g 76g

IP Rating IP30 IP30 IP30

Dimensions D (mm) D1 (mm) Catalogue numbers

Photo-Thermal 101 43 55 Photo/Thermal Sensor CAPT340

Multi-Mode Heat 101 43 55 Multi-Mode Heat Sensor CAH330

You might also like