Company Name: Created By: Phone: Email: Date:: Qty. Description SP 5A-33
Company Name: Created By: Phone: Email: Date:: Qty. Description SP 5A-33
Company Name: Created By: Phone: Email: Date:: Qty. Description SP 5A-33
Saka Parfima
Created by: IdaBagusEgy
Phone: 085829118762
Email: gusegygrundfos@gmail.com
Date: 31/05/2023
Qty. Description
1 SP 5A-33
Submersible borehole pump, suitable for pumping clean water. Can be installed vertically or horizontally. All steel
components are made in stainless steel, EN 1.4301 (AISI 304), that ensures high corrosive resistance. This pump
carries drinking water approval.
The pump is fitted with a 3 kW MS4000 motor with sand shield, mechanical shaft seal, water-lubricated journal
bearings and a volume compensating diaphragm. The motor is a canned type submersible motor offering good
mechanical stability and high efficiency. Suitable for temperatures up to 40 °C.
The motor is not fitted with a temperature sensor. If temperature monitoring is desired, a Pt1000 sensor can be fitted.
Pump
All pump surfaces that are in contact with pumped liquids are made in stainless steel which makes them corrosion-
and wear-resistant. The corrosion diagram below shows the capabilities of the pump and motor in relation to the
temperature in Celsius (y-axis) and the concentration of chloride in ppm (x-axis).
The elastomer parts in the pump are made of NBR (Nitrile-Butadiene Rubber) and TPU (Thermoplastic
Poly-Urethane) which offers good wear resistance and long service intervals.
Motor
The stator is hermetically encapsulated in stainless steel and the windings are embedded in polymer compound. This
results in high mechanical stability, optimum cooling and reduces the risk of short circuits in the windings.
The shaft seal is a tungsten carbide/ceramic replaceable mechanical shaft seal. The material combination provides
optimum sealing, resistance and long life. Together with the shaft seal housing, the sand shield forms a labyrinth
seal, which during normal operating conditions prevents penetration of sand particles into the shaft seal.
The motor can be fitted with a Pt100 or Pt1000 sensor that together with a control unit ensures that the maximum
operating temperature conditions are not exceeded.
Liquid:
Pumped liquid: Water
Liquid temperature range: -15 .. 40 °C
Max liquid t at 0.15 m/sec: 40 °C
Selected liquid temperature: 20 °C
Density: 998.2 kg/m³
Technical:
Pump speed on which pump data are based: 2900 rpm
Actual calculated flow: 72.34 l/min
Rated flow: 83.33 l/min
Resulting head of the pump: 147.4 m
Rated head: 135 m
Shaft seal for motor: HM/CER
Approvals: CE,EAC
Curve tolerance: ISO9906:2012 3B
Motor version: T40
Return valve: YES
Specification for shaft end: SPLINE
Materials:
Pump: Stainless steel
EN 1.4301
AISI 304
Impeller: Stainless steel
EN 1.4301
AISI 304
Motor: Stainless steel
DIN W.-Nr. 1.4301
AISI 304
Installation:
Maximum operating pressure: 60 bar
Maximum outlet pressure: 21.5 bar
Type of connection: Rp
Size of connection: 1 1/2 inch
Motor diameter: 4 inch
Minimum borehole diameter: 105 mm
Electrical data:
Motor type: MS4000
Motor flange design: Grundfos
Rated power - P2: 3 kW
Power (P2) required by pump: 3 kW
Mains frequency: 50 Hz
Rated voltage: 3 x 380-400-415 V
Rated current: 7.70-7.85-8.10 A
Others:
Minimum efficiency index, MEI ≥: 0.50
Net weight: 26 kg
Gross weight: 27.8 kg
Shipping volume: 0.022 m³
On request SP 5A-33 50 Hz
H SP 5A-33, 3*400 V, 50Hz eta
[m] [%]
220
200 100
180 90
160 80
140 70
120 60
100 50
80 40
60 30
40 20
20 10
0 0
0 10 20 30 40 50 60 70 80 90 100 110 Q [l/min]
Q = 72.34 l/min H = 147.4 m
Es = 0.9087 kWh/m³ n = 2856 rpm
Pumped liquid = Water Liquid temperature during operation = 20 °C
Density = 998.2 kg/m³ Eta pump = 58.4 %
Eta pump+motor = 44.1 %
P
[kW]
4.5
4.0 P1
3.5
3.0
P2
2.5
2.0
1.5
1.0
0.5
0
P1 = 3.944 kW
P2 = 2.977 kW
Technical: 160 80
Pump speed on which pump data are based: 2900 rpm 140 70
120 60
Actual calculated flow: 72.34 l/min
100 50
Rated flow: 83.33 l/min
80 40
Resulting head of the pump: 147.4 m
Rated head: 135 m 60 30
Stages: 33 40 20
Number of reduced-diameter impellers: NONE 20 10
Shaft seal for motor: HM/CER 0 0
Approvals: CE,EAC 0 20 40 60 80 100 Q [l/min]
Materials: 4 P1
Pump: Stainless steel
3
Pump: EN 1.4301 P2
Pump: AISI 304 2
Impeller: Stainless steel
1
Impeller: EN 1.4301
Impeller: AISI 304 0
Motor: Stainless steel P1 = 3.944 kW
P2 = 2.977 kW
Motor: DIN W.-Nr. 1.4301
497
95
1343
846.2
Rp1 1/2
101
Liquid:
Pumped liquid: Water
Liquid temperature range: -15 .. 40 °C
Max liquid t at 0.15 m/sec: 40 °C
497
95
Description Value
Thermal protec: external
Built-in temp. transmitter: no
Length of cable: 1.7 m
Power cable type: FLAT
Motor No: 79194508
Windings: Enamelled
Others:
Minimum efficiency index, MEI ≥: 0.50
Net weight: 26 kg
Gross weight: 27.8 kg
Shipping volume: 0.022 m³
On request SP 5A-33 50 Hz
101
Rp1 1/2
846.2
1343
497
95