Solenoid Driver

KCD0-SD-Ex1.1245
< 1-channel isolated barrier
< 24 V DC supply (loop powered)
< Current limit 45 mA at 12 V DC
< Housing width 12.5 mm
< Up to SIL 3 acc. to IEC/EN 61508

Function

This isolated barrier is used for intrinsic safety applications.

The device supplies power to solenoids, LEDs and audible alarms located in a hazardous area.
The device is loop powered, so the available energy at the output is received from the input signal. The output signal has a resistive characteristic.
As a result the output voltage and current are dependent on the load and the input voltage
At full load, 12 V at 45 mA is available for the hazardous area application.

Connection

KCD0-SD-Ex1.1245

1+ 5+

V
2- 6-
Release date: 2022-01-17 Date of issue: 2022-01-17 Filename: 233601_eng.pdf

Zone 0, 1, 2 Zone 2
Div. 1, 2 Div. 2

Technical Data
General specifications
Signal type Digital Output
Functional safety related parameters
Safety Integrity Level (SIL) SIL 3
Supply
Rated voltage Ur loop powered
Power dissipation <1W
Input
Connection side control side
Connection terminals 5, 6
Rated voltage Ur 19 ... 30 V DC

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

Pepperl+Fuchs Group USA: +1 330 486 0002 Germany: +49 621 776 2222 Singapore: +65 6779 9091
www.pepperl-fuchs.com pa-info@us.pepperl-fuchs.com pa-info@de.pepperl-fuchs.com pa-info@sg.pepperl-fuchs.com 1
 Solenoid Driver KCD0-SD-Ex1.1245
Technical Data
Current ≤ 72 mA at Ui = 19 V, ≤ 50 mA at Ui = 30 V with 265 Ω output load
≤ 45 mA at Ui = 19 V, ≤ 31 mA at Ui = 30 V with shorted output
≤ 14 mA at Ui = 19 V, ≤ 11 mA at Ui = 30 V no load at output
Inrush current ≤ 200 mA after 100 µs
Output
Connection side field side
Connection terminals 1+, 2-
Internal resistor Ri ≤ 238 Ω
Current Ie ≤ 45 mA
Voltage Ue ≥ 12 V
Open loop voltage Us ≥ 22.7 V
Output rated operating current 45 mA
Output signal These values are valid for the rated operating voltage 19 ... 30 V DC.
Energized/De-energized delay single operation: typ. 1.7 ms/50 µs; periodical: typ. 5 µs/50 µs
Galvanic isolation
Input/Output reinforced insulation acc. to EN 50178, rated insulation voltage 300 Veff
Indicators/settings
Display elements LED
Labeling space for labeling at the front
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EU EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility NE 21
Degree of protection IEC 60529
Protection against electrical shock UL 61010-1
Ambient conditions
Ambient temperature -20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Degree of protection IP20
Connection screw terminals
Mass approx. 100 g
Dimensions 12.5 x 119 x 114 mm (0.5 x 4.7 x 4.5 inch) (W x H x D) , housing type A2
Mounting on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
EU-type examination certificate BASEEFA 06 ATEX 0170
Marking 1 II (1)G [Ex ia Ga] IIC , 1 II (1)D [Ex ia Da] IIIC , 1 I (M1) [Ex ia Ma] I
Output [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I
Release date: 2022-01-17 Date of issue: 2022-01-17 Filename: 233601_eng.pdf

Voltage Uo 25.2 V
Current Io 110 mA
Power Po 693 mW
Input
Maximum safe voltage Um 250 V (Attention! The rated voltage can be lower.)
Certificate PF 06 CERT 0971 X
Marking 1 II 3G Ex nA IIC T4 Gc
Galvanic isolation
Input/Output safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive conformity
Directive 2014/34/EU EN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 60079-15:2010
International approvals
FM approval
Control drawing 116-0419 (cFMus)
UL approval
Control drawing 116-0420 (cULus)

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

Pepperl+Fuchs Group USA: +1 330 486 0002 Germany: +49 621 776 2222 Singapore: +65 6779 9091
www.pepperl-fuchs.com pa-info@us.pepperl-fuchs.com pa-info@de.pepperl-fuchs.com pa-info@sg.pepperl-fuchs.com 2
 Solenoid Driver KCD0-SD-Ex1.1245
Technical Data
IECEx approval
IECEx certificate IECEx BAS 06.0032
IECEx marking [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I
General information
Supplementary information Observe the certificates, declarations of conformity, instruction manuals, and manuals
where applicable. For information see www.pepperl-fuchs.com.

Assembly

Front view
Removable terminal
blue

1 2
3 4

KCD0-
SD-Ex1.1245

LED yellow:
OUT
Status

5 6
7 8
9 10

Removable terminal
green

Matching System Components

K-DUCT-BU Profile rail, wiring comb field side, blue

Accessories
Release date: 2022-01-17 Date of issue: 2022-01-17 Filename: 233601_eng.pdf

KC-ST-5GN Terminal block for KC modules, 2-pin screw terminal, green

KC-ST-5BU Terminal block for KC modules, 2-pin screw terminal, blue

KF-CP Red coding pins, packaging unit: 20 x 6

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

Pepperl+Fuchs Group USA: +1 330 486 0002 Germany: +49 621 776 2222 Singapore: +65 6779 9091
www.pepperl-fuchs.com pa-info@us.pepperl-fuchs.com pa-info@de.pepperl-fuchs.com pa-info@sg.pepperl-fuchs.com 3
 Solenoid Driver KCD0-SD-Ex1.1245

Characteristic Curve
Output characteristics

Output circuit diagram Output characteristic

Ri U

Us
Us

Ue

Ie I
Release date: 2022-01-17 Date of issue: 2022-01-17 Filename: 233601_eng.pdf

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

4
Pepperl+Fuchs Group USA: +1 330 486 0002 Germany: +49 621 776 2222 Singapore: +65 6779 9091
www.pepperl-fuchs.com pa-info@us.pepperl-fuchs.com pa-info@de.pepperl-fuchs.com pa-info@sg.pepperl-fuchs.com