Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Assembly Features: Removable Terminals Green

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

Relay Module KFD0-RSH-1.4S.

PS2

Features Assembly

• 1-channel signal conditioner


• 24 V DC supply (loop powered) Front view
• Logic input 20 V DC ... 26.5 V DC, non-polarized Removable terminals
• Fail-safe relay contact output for de-energized and green

energized to safe function


• Test pulse immunity 1 2
4 5
3
6

• Up to SIL 3 acc. to IEC 61508 LED yellow:


KFD0-RSH-1.4S.PS2
Relay output
max. 5AT

Function LED red:


Test 1

This signal conditioner is a relay module that is suitable for


LED red:
Fuse carrier Test 2
safely switching applications of a load circuit. The device OUT TST1 TST2

isolates load circuits up to 230 V and the 24 V control interface.


The energized to safe (ETS) function is permitted for SIL3 7 8 9

applications with output I. The de-energized to safe (DTS) 10 11 12


13 14 15

function is permitted for SIL3 applications with output II.


Additionally a dual pole switching (DPS) is possible by Removable terminals
combination of output I and II. green

The relays are of diverse design, but have a common effect on


the individual switch output. For checking of these relays,
terminals 10, 11 and 12 can be used. The test mode will be
indicated by LEDs according to NAMUR NE44.
The outputs are galvanically isolated from the input. Output II
is protected against contact welding by a fuse depending on
the used terminal.

Application

This device is compatible to the controls: 3


• Yokogawa ProSafe DO cards SDV531, SDV541
• Honeywell DO card SDO-0824
Compatibility check to other ESD/DCS systems on request.

Connection
224579_eng.xml

KFD0-RSH-1.4S.PS2

DPS DTS ETS


Date of issue 2019-01-14

2 7
V I
3
V 24 V
4 8 (+/–)

V II 5 10
6
Release date 2019-01-14 10:15

12 Test 1
Test 2
11

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

1
Pepperl+Fuchs Group USA: +1 330 486 0002 Germany: +49 621 776 2222 Singapore: +65 6779 9091
www.pepperl-fuchs.com pa-info@us.pepperl-fuchs.com pa-info@de.pepperl-fuchs.com pa-info@sg.pepperl-fuchs.com
Technical data KFD0-RSH-1.4S.PS2

General specifications
Signal type Digital Output
Functional safety related parameters
Safety Integrity Level (SIL) SIL 3
Supply
Rated voltage Ur loop powered
Power dissipation < 1.5 W
Power consumption < 1.5 W
Input
Connection side control side
Connection Input terminals 7, 8 ; test input terminals 10, 11, 12
Pulse/Pause ratio ≥ 20 ms / ≥ 20 ms
Test input see Functional Safety Manual
Signal level 0-signal: -3 ... 3 V DC
1-signal: 20 ... 26.5 V
Rated current Ir 45 ... 50 mA
Output
Connection side field side
Connection output I (ETS): terminals 2, 3
output II (DTS): terminals 4, 5, 6
output I and II (DPS): terminals 2, 3, 4, 5, 6
Contact loading 253 V AC/5 A/cos φ 0.7; 30 V DC/5 A resistive load
Minimum switch current 2 mA / 24 V DC
Energized/De-energized delay approx. 10 ms / approx. 5 ms
Mechanical life 5 x 106 switching cycles
Fuse rating 2.5 A (max. 5 A)
recommended maximum utilization of the fuse: 80 %
Transfer characteristics
Switching frequency < 10 Hz
Galvanic isolation
Input/Output reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
Output/Output reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
Indicators/settings
Display elements LEDs
Labeling space for labeling at the front
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EU EN 61326-1:2013 (industrial locations)
Low voltage
Directive 2014/35/EU EN 61010-1:2010
Conformity
Electromagnetic compatibility NE 21:2012
Degree of protection IEC 60529:2013
Ambient conditions
Ambient temperature -20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Degree of protection IP20
Connection screw terminals
224579_eng.xml

Mass approx. 100 g


Dimensions 20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) , housing type B2
Mounting on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection
with hazardous areas
Date of issue 2019-01-14

Certificate PF 15 CERT 3844 X


Marking ¬ II 3G Ex nA nC IIC T4 Gc [device in zone 2]
Output
Contact loading 50 V AC/4 A; 30 V DC/4 A , see derating curves for Zone 2
Directive conformity
Directive 2014/34/EU EN 60079-0:2012+A11:2013, EN 60079-15:2010
Release date 2019-01-14 10:15

General information
Supplementary information Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For
information see www.pepperl-fuchs.com.

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

2
Pepperl+Fuchs Group USA: +1 330 486 0002 Germany: +49 621 776 2222 Singapore: +65 6779 9091
www.pepperl-fuchs.com pa-info@us.pepperl-fuchs.com pa-info@de.pepperl-fuchs.com pa-info@sg.pepperl-fuchs.com
Technical data KFD0-RSH-1.4S.PS2

Derating

I I
(A) (A)

5 5

4 4

3 3

2 2

1 1

0 10 20 30 40 50 60 70 T 0 10 20 30 40 50 60 70 T
(°C) (°C)

≥ 10 mm ≥ 10 mm

fused 5 AT unfused
fused 5 AT, 10 mm unfused, 10 mm
Ui 26.5 V Ui 26.5 V

Derating for Zone 2 Application

I I
(A) (A)

5 5

4 4

3 3

2 2

1 1

0 10 20 30 40 50 60 70 T 0 10 20 30 40 50 60 70 T
(°C) (°C)

≥ 10 mm ≥ 10 mm

fused 5 AT unfused
fused 5 AT, 10 mm unfused, 10 mm
Ui 26.5 V Ui 26.5 V
224579_eng.xml
Date of issue 2019-01-14
Release date 2019-01-14 10:15

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

3
Pepperl+Fuchs Group USA: +1 330 486 0002 Germany: +49 621 776 2222 Singapore: +65 6779 9091
www.pepperl-fuchs.com pa-info@us.pepperl-fuchs.com pa-info@de.pepperl-fuchs.com pa-info@sg.pepperl-fuchs.com
Technical data KFD0-RSH-1.4S.PS2

Maximum Switching Power of Output Contacts

I (A)
5
4
3
1
2

0.5 2
0.4
0.3

0.2

0.1
0 50 100 150 200 250 U (V)

Resistive load DC
Resistive load AC
1 max. 105 switching cycles
2 max. 3 x 104 switching cycles
224579_eng.xml
Date of issue 2019-01-14
Release date 2019-01-14 10:15

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

4
Pepperl+Fuchs Group USA: +1 330 486 0002 Germany: +49 621 776 2222 Singapore: +65 6779 9091
www.pepperl-fuchs.com pa-info@us.pepperl-fuchs.com pa-info@de.pepperl-fuchs.com pa-info@sg.pepperl-fuchs.com

You might also like