MLX75305

Light-to-Voltage SensorEyeC

1. Features and Benefits 3. Functional Diagram

 Converts light intensity to voltage 3 - Vdd

 High linearity
VDD

 Low temperature dependency

Ee
 Supply voltage range 3V to 5.5V
 Open drain output voltage output
Vref 2 - OUT
 Automotive Cavity SO8 package
 Designed for automotive applications
 Solder reflow 260degC, MSL3
1 - Vss
 Automotive qualified AEC-Q100 Grade 1
 Operating temperature -40 up to 125degC
 RoHS compliant lead-free Figure 1

2. Application Examples 4. General Description

 General The Melexis SensorEyeC series are CMOS
integrated optical sensor ICs including
 Ambient Light Sensor
photodiode, transimpedance amplifier and output
 LCD Backlight Sensor transistor on one chip. These sensors are designed
 LED Power Monitoring for high-volume automotive and non-automotive
applications.
 Automotive
 Automatic light dimming of instrument The MLX75305 Light-to-Voltage SensorEyeC
panels and displays converts ambient or LED light intensity into an
output voltage.
 Electrochrome Dimming
 Headlights on/off control The MLX75305 block diagram is shown above and
contains following blocks: a photodiode, a
 Printers/Copiers transimpedance amplifier to convert and amplify
 Paper feed detection the photocurrent of the photodiode and an open
drain output buffer stage.
 Paper size and orientation detection
 Toner cartridge presence detection

REVISION 9 - OCTOBER 17, 2016

[390107530501]
MLX75305
Datasheet

5. Ordering Information
Product Temperature Package Option Code Packing Form

MLX75305 K (-40°C to 125°C) XD AAA-000 RE

MLX75305 K (-40°C to 125°C) XD ABA-000 RE

Legend:
Temperature Code: K for Temperature Range -40°C to 125°C

Package Code: XD for SOIC-8 package

Option Code: AAA-xxx: Responsivity Gain10

ABA-xxx: Responsivity Gain1

Packing Form: RE for Reel

Ordering Example: MLX75305EXD-AAA-000-RE

Table 1

REVISION 9 - OCTOBER 17, 2016 Page 2 of 12

[390107530501]
MLX75305
Datasheet

Contents
1. Features and Benefits ............................................................................................................................ 1
2. Application Examples............................................................................................................................. 1
3. Functional Diagram ............................................................................................................................... 1
4. General Description ............................................................................................................................... 1
5. Ordering Information ............................................................................................................................ 2
6. Pin Definitions and Descriptions ............................................................................................................ 4
7. Absolute Maximum Ratings ................................................................................................................... 4
8. General Electrical Specifications ............................................................................................................ 5
9. Spectral Responsivity and Linear Optical Response Curve ..................................................................... 7
10. Timing diagrams .................................................................................................................................. 8
11. Applications Information ..................................................................................................................... 8
12. SO8 Open Cavity Package Information ................................................................................................ 9
13. Standard Information ........................................................................................................................ 11
14. ESD Precautions................................................................................................................................. 11
15. Disclaimer .......................................................................................................................................... 11
16. Contact .............................................................................................................................................. 12

REVISION 9 - OCTOBER 17, 2016 Page 3 of 12

[390107530501]
MLX75305
Datasheet

6. Pin Definitions and Descriptions

Pin # Name Description Type

1 Vss Ground connection Ground

2 OUT Analog output Open drain output

3 Vdd Power supply Supply

4 N.C. Not connected Floating

5..8 N.C. Not connected Floating

Table 2

7. Absolute Maximum Ratings

Valid for all MLX75305 versions. All voltages are referenced to Vss.

Symbol Rating Value Unit

Vdd Supply Voltage, VDD (over voltage) -0.3 to 7 V

Vout DC Output Voltage -0.3 to Vdd+0.3 V

Iout DC Output Current, per Pin ±20 mA

TStg Storage Temperature Range, TS -40 to 125 °C

VESD-HBM ESD Sensitivity (Human Body Model 4 kV

according to CDF-AEC-Q100)

VESD-MM ESD Sensitivity (Machine Model according 200 V

to CDF-AEC-Q100)

Table 3

Exceeding the absolute maximum ratings may cause permanent damage. Exposure to absolute maximum-
rated conditions for extended periods may affect device reliability.

REVISION 9 - OCTOBER 17, 2016 Page 4 of 12

[390107530501]
MLX75305
Datasheet

8. General Electrical Specifications

All voltages are referenced to Vss.

Symbol Parameter Conditions Min Typ Max Unit Tes

t1

Vdd Supply Voltage 3 5.5 V V

Idd Static Power Supply Current At Vdd=5.5V, 2 mA V

unloaded output

Vdark Dark level (a), (c) Ee=0

Tamb=-40 .. 85˚C 4 160 mV V
Tamb=85 .. 125˚C 4 210 mV V

Re10 Responsivity Gain 10 (option (a), Vout range = -15% 70 +15% mV/(µW/ V
2
code A) 50mV..4.5V, 25˚C cm )

Re1 Responsivity Gain 1 (option (a), Vout range = -15% 7 +15% mV/(µW/ V
2
code B) 50mV..4.5V, 25˚C cm )

NLAO RMS Non Linearity (a), in the 10..90% +/-2 % V

Output Range

TC Temperature Coefficient (b), Ee=46µW/cm²

-0.16 %/C X
For visual light: 0.06 %/C X
For NIR (λ=850nm):

λ0.3 Spectral Bandwidth Tamb=25˚C 500 1000 nm X

2
Emax Absolute Maximum Irradiance Vdd=5V, λ=850nm, 50*E µW/cm X
Tamb=25˚C Vout
2
Spd Area of photodiode 0.36 mm D

VOH Maximum Output voltage high (a), 4.9 4.95 V V

Ee=15*EVout...Emax

tVdd_rise Vdd rise time 10..90% of Vdd 4 µs V

tsetup Electrical setup-time (a), Vout within Vdd/2 70 140 µs V

+/- 5%

1
The column Test indicates if the specific parameter is tested in production. Following symbols are used:
V: the specific parameter is tested in production
X: the specific parameter is verified in characterization, but is not tested in production (e.g. timings and capacitances)
D: the specific parameter is guaranteed by design and is not tested as such in production

REVISION 9 - OCTOBER 17, 2016 Page 5 of 12

[390107530501]
MLX75305
Datasheet

ton Turn-on time (a), Vout > VOH_min 6 50 µs

toff Turn-off time (a), Vout > VOH_min 6 50 µs V

tr Rise time (a), Vout > VOH_min 10 22 µs V

tf Fall time (a), Vout > VOH_min 10 22 µs V

TA Operating Temperature Range Temperature Code K -40 125 °C V

Table 4

(a) Vdd=5V, RL=10kOhm, CL=50pF, λ= 850nm

(b) Vdd=5V, RL=10kOhm, CL=50pF

(c) The dark level is ratio metric with the Vdd power supply voltage

REVISION 9 - OCTOBER 17, 2016 Page 6 of 12

[390107530501]
MLX75305
Datasheet

9. Spectral Responsivity and Linear Optical Response

Curve

Relative Spectral Response

1.2

1
Relative Spectral Response

0.8

0.6

0.4

0.2

0
350 400 450 500 550 600 650 700 750 800 850 900 950 1000 1050

Wave Length [nm]

Figure 2

Figure 3

REVISION 9 - OCTOBER 17, 2016 Page 7 of 12

[390107530501]
MLX75305
Datasheet

10. Timing diagrams

E

Vdd Unstable Vdd Stable Vdd Ee>1mW/cm²

Vdd

t
t
tsetup
VOUT ton toff
VOUT

0.9VOUT
1.05VOUT
VOUT=0.5Vdd
0.5VOUT
0.95VOUT
0.1VOUT
t
t

Definition of the electrical setup-time tf tr

Definition of the rise and fall times

Figure 4

11. Applications Information

A typical connection diagram is shown in the figure below. A load resistor RL is needed to get the voltage level out. The load
capacitance CL is typically formed by the input capacitance of the component that is connected to the sensor output, the
wiring capacitance and the output capacitance of the sensor itself.

Vdd

Ee
3
MLX75305 2 OUT
1
RL CL

Figure 5

Decoupling capacitors between Vdd and Vss (1uF in parallel with 100nF) are highly recommended in all configurations.

Recommendation: every change in the application should be agreed by both parties.

REVISION 9 - OCTOBER 17, 2016 Page 8 of 12

[390107530501]
MLX75305
Datasheet

12. SO8 Open Cavity Package Information

SO8 open cavity package, MSL3, 260˚C soldering profile.

Dimensions and marking for MLX75305EXD-AAA-000-RE and MLX75305KXD-AAA-000-RE (gain 10)

Figure 6

REVISION 9 - OCTOBER 17, 2016 Page 9 of 12

[390107530501]
MLX75305
Datasheet

Dimensions and marking for MLX75305EXD-ABA-000-RE and MLX75305KXD-ABA-000-RE (gain 1)

Figure 7

REVISION 9 - OCTOBER 17, 2016 Page 10 of 12

[390107530501]
MLX75305
Datasheet

13. Standard Information

Our products are classified and qualified regarding soldering technology, solderability and moisture
sensitivity level according to standards in place in Semiconductor industry.

For further details about test method references and for compliance verification of selected soldering
method for product integration, Melexis recommends reviewing on our web site the General
Guidelines soldering recommendation. For all soldering technologies deviating from the one mentioned in
above document (regarding peak temperature, temperature gradient, temperature profile etc), additional
classification and qualification tests have to be agreed upon with Melexis.

For package technology embedding trim and form post-delivery capability, Melexis recommends to consult
the dedicated trim&form recommendation application note: lead trimming and forming recommendations

Melexis is contributing to global environmental conservation by promoting lead free solutions. For more
information on qualifications of RoHS compliant products (RoHS = European directive on the Restriction Of
the use of certain Hazardous Substances) please visit the quality page on our
website: http://www.melexis.com/en/quality-environment

14. ESD Precautions

Electronic semiconductor products are sensitive to Electro Static Discharge (ESD).
Always observe Electro Static Discharge control procedures whenever handling semiconductor products.

15. Disclaimer
The information furnished by Melexis herein is believed to be correct and accurate. Melexis disclaims (i) any and all
liability in connection with or arising out of the furnishing, performance or use of the technical data or use of the
product as described herein, (ii) any and all liability, including without limitation, special, consequential or incidental
damages, and (iii) any and all warranties, express, statutory, implied, or by description, including warranties of fitness
for particular purpose, non-infringement and merchantability. No obligation or liability shall arise or flow out of
Melexis’ rendering of technical or other services.

The information contained herein is provided "as is” and Melexis reserves the right to change specifications and/or
any other information contained herein at any time and without notice. Therefore, before placing orders and/or prior
to designing this product into a system, users or any third party should obtain the latest version of the relevant
information to verify that the information being relied upon is current. This document supersedes and replaces all
prior information regarding the product(s) as described herein and/or previous versions of this document.

Users or any third party must further determine the suitability of the Melexis’ product(s) described herein for its
application, including the level of reliability required and determine whether it is fit for a particular purpose.

The information contained herein is proprietary and/or confidential information of Melexis. The information contained
herein or any use thereof does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other
intellectual property rights, whether with regard to such information itself or anything described by such information.
This document as well as the product(s) described herein may be subject to export control regulations. Please be
aware that export might require a prior authorization from competent authorities.

REVISION 9 - OCTOBER 17, 2016 Page 11 of 12

[390107530501]
MLX75305
Datasheet

The product(s) as described herein is/are intended for use in normal commercial applications. Unless otherwise agreed
upon in writing, the product(s) described herein are not designed, authorized or warranted to be suitable in
applications requiring extended temperature range, unusual environmental requirements. High reliability
applications, such as medical life-support or life-sustaining equipment are specifically not recommended by Melexis.

The product(s) may not be used for the following applications subject to export control regulations: the development,
production, processing, operation, maintenance, storage, recognition or proliferation of 1) chemical, biological or
nuclear weapons, or for the development, production, maintenance or storage of missiles for such weapons: 2) civil
firearms, including spare parts or ammunition for such arms; 3) defense related products, or other material for
military use or for law enforcement; 4) any applications that, alone or in combination with other goods, substances or
organisms could cause serious harm to persons or goods and that can be used as a means of violence in an armed
conflict or any similar violent situation.

Products sold by Melexis are subject to the terms and conditions as specified in the Terms of Sale, which can be found
at https://www.melexis.com/en/legal/terms-and-conditions.

Melexis NV © - No part of this document may be reproduced without the prior written consent of Melexis. (2016)

ISO/TS 16949 and ISO14001 Certified

16. Contact
For the latest version of this document, go to our website at www.melexis.com.

For additional information, please contact our Direct Sales team and get help for your specific needs:

Europe, Africa Telephone: +32 13 67 04 95

Email : sales_europe@melexis.com

Americas Telephone: +1 603 223 2362

Email : sales_usa@melexis.com

Asia Email : sales_asia@melexis.com

REVISION 9 - OCTOBER 17, 2016 Page 12 of 12

[390107530501]