BRIDGELINE-JHS-ENGINEERING/NORTH CENTRAL RLY

TENDER DOCUMENT

Tender No: Br-JHS-2024-07

Closing Date/Time: 30/05/2024 15:00

DY CE BRIDGE LINE JHANSI acting for and on behalf of The President of India invites E-Tenders agains
Closing Date/Time 30/05/2024 15:00 Hrs. Bidders will be able to submit their original/revised bids upto clos
Manual offers are not allowed against this tender, and any such manual offer received shall be ignored.

1. NIT HEADER

Name of Jhansi Division: Construction of Road Over Bridge (ROB) in lieu of LC No. 341 (Km 1074/810) in
VGLJ-BINA
Bidding tNormal Section.
Tender
Tender TOpen Bidding System
Tender Cl30/05/2024 15:00 Date Time Of Uploading Tender
Pre-Bid No Pre-Bid Conference Date Time
Confere
nce
Require
d

Advertise402767180.77 Tendering Section

Bidding SSingle Rate for Each Bidding Unit
Earnest M2163800.00 Validity of Offer ( Days)
Tender Do0.00 Period of Completion
Contract Works Contract Category
Bidding S16/05/2024 Are Joint Venture (JV) firms allowed to bid
Ranking OLowest to Highest Expenditure Type

2. SCHEDULE

S.No. Item Code Item Qty

Schedule A-USSOR 2021 Items

1 Please see Item Breakup for details.

Description:- USSOR 2021 items

S.No. Item Code Item Qty

Schedule B-DSR 2021 Items

1 Please see Item Breakup for details.

Description:- DSR 2021 Items

S.No. Item Code Item Qty

Schedule C-NS Item

NS 1 1025.00
1 Description:- Providing and laying Dense Bituminous concrete on prepared surface with spec
aggregate
NS 2 in hot mix plant, transporting the mixed material and laying with mechanical paver fini
required length, placing1000.00
in position and connecting with the precast facia panels as per the de
2 materials, labour, lead and lift ,plants, machinery, taxes royalty etc. complete. Item to include all i
NS 3
specifications with CBR3000.00
under soaked conditions not less than 6%. All incidental work requir
3
measured and paid for the finished volume of backfill and subgrade placed in position excluding
NS 4 1000.00
4
Description:- Extra for using Super shield E71-T8 Electrode instead of regular flux core wire in a
NS 5 380.00
5
Description:- Extra for launching of all types of steel girders for road over bridges (all spans) und

3. ITEM BREAKUP

ScheduleSchedule A-USSOR 2021 Items

Item- 1 USSOR 2021 items
S No. Item No Description of Item
 Earthwork in filling in embankment, guide bunds, around
buried type abutments, bridge gaps, trolley refuges,
platforms etc. with contractor's own earth conforming to
Soil Quality Class SQ1/SQ2/SQ3, after preparation of
foundations as applicable, benching in existing banks
wherever required, spreading in layers with motor
grader, bringing the moisture content to OMC,
mechanical compaction to specified density and
dressing of bank to final profile as per RDSO
Specifications: RDSO/2020/GE: IRS-0004 with latest
correction slips. Note: 1) Foundation preparation,
Benching including additional earthwork on account of
this, wherever required, shall be paid extra under
relevant schedule item for benching. 2) Payment for
Earthwork under this item shall be made based on the
cross section measurements calculated (i) with original
ground profile of existing bank based on initial ground
levels before doing benching and (ii) final profile of the
bank worked out with final levels as per prevailing
guidelines.
1 011031 Using Soil Class SQ1

Providing portable fencing along running track where

work is to be done in close vicinity of track, maintaining
during execution of work and removing after completion
of the work as per direction of the Engineer. Fencing
shall consist of self supporting steel angles of size 50mm
x 50mm x 6mm, 1.5m long provided with hooks etc. and
embedded in CC 1:2:4 block of size 0.23m x 0.23m x
0.23m placed at c/c distance of 2m along track. 12mm
dia rods in three horizontal layers shall be tack welded
with angle posts. Note : Released material will be
property of the contractor after completion of work. Cost
of cement required for CC blocks shall be paid
separately.
2 013042 With provision of painting verticals & horizontals with red
luminous paints / strips of 30cm each with a gap of 30
cm.
 Earthwork in excavation by mechanical means
(Hydraulic Excavator)/Manual Means for foundations
and floors of the bridges, retaining walls etc. including
setting out, dressing of sides, ramming of bottom, getting
out the excavated material, back filling in layers with
approved material and consolidation of the layers by
ramming and watering etc. including all lift, disposal of
surplus soil up to a lead of 300m, all types of shoring and
strutting with all labour and material complete as per
drawing and technical specification as directed by
Engineer in charge. Note: This item will be used for
excavation work in connection with other miscellaneous
works also like side drains, foundation for OHE masts
and other miscellaneous structures in connection with
Gauge Conversion, Doubling, New lines.
3 022011 All kinds of soils
4 022014 Hard rock (blasting prohibited )

Providing and laying in position Plain cement concrete of

specified Nominal Mix for miscellaneous works like side
drains, foundation for OHE masts and other
miscellaneous structures excluding the cost of Cement,
centering and shuttering - All work up to plinth level :
5 022032 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded
stone aggregate 20 mm nominal size)
6 022034 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded
stone aggregate 20 mm nominal size)
7 022040

Providing and laying in position machine batched,

machine mixed and machine vibrated Cement Concrete
of specified grade as per approved Design Mix (mixed in
Mobile Concrete Batching/Mixing Plant at site or RMC
from approved plants) using 20mm graded crushed
stone aggregate and coarse sand of approved quality in
RCC raft foundation & Pile cap including finishing, using
Plasticiser in approved proportions (as per IS:9103), to
modify workability without impairing strength and
durability complete as per specifications and direction of
the Engineer in charge. Note: 1. Payment for cement,
reinforcement and shuttering shall be made extra under
relevant item. 2. Plasticiser shall invariably be used in
approved proportion to increase workability with
minimum possible quantity of cement for all grade of
Design Mix Concrete unless it is specifically approved
citing reasons for not using plasticiser at the stage of Mix
Design and in that case deduction shall be made as per
relevant item.

Providing and laying in position machine batched,

machine mixed and machine vibrated Cement Concrete
of specified grade as per approved Design Mix (mixed in
Mobile Concrete Batching/Mixing Plant at site or RMC
from approved plants) using 20mm graded crushed
stone aggregate and coarse sand of approved quality for
the following Reinforced cement concrete structural
elements up to height of 9.0 m from foundation top level,
including finishing, using Plasticiser in approved
proportions (as per IS:9103), to modify workability
without impairing strength and durability complete as per
specifications and direction of the Engineer in charge.
Note: 1. Payment for cement, reinforcement and
shuttering shall be made extra under relevant item. 2.
Plasticiser shall invariably be used in approved
proportion to increase workability with minimum possible
quantity of cement for all grade of Design Mix Concrete
unless it is specifically approved citing reasons for not
using plasticiser at the stage of Mix Design and in that
case deduction shall be made as per relevant item.
8 022051 Abutment & Pier
9 022052 Wing wall and Return wall
10 022053
Abutment cap, Pier Cap, Inspection Platform & Pedestal
over Pier cap, Fender wall, Diaphragm wall etc.
11 022054 Approach slab at formation level, Dirt wall/ ballast wall at
formation level
12 024010

Providing and casting machine batched, machine mixed

and machine vibrated Cement Concrete of specified
grade as per approved Design Mix, mixed in Mobile
Concrete Batching/Mixing Plant at site or RMC from
approved plants, (Cast in-Situ/Pre-cast) in bottom/top
slab, side walls, toe wall and sumps haunch filling head
walls, thrust bed or any other component using 20mm
graded crushed stone aggregate and coarse sand of
approved quality of RCC box of any size including
finishing, Plasticiser in approved proportions (as per
IS:9103), to modify workability without impairing strength
and durability, complete as per drawings and technical
specifications as directed by Engineer in charge. Note: 1.
Payment for cement, reinforcement and shuttering shall
be made extra under relevant item. 2. Plasticiser shall
invariably be used in approved proportion to increase
workability with minimum possible quantity of cement for
all grade of Design Mix Concrete unless it is specifically
approved citing reasons at the stage of Mix Design and
in that case deduction shall be made as per relevant
item.
Centering and shuttering including strutting, propping
etc. and removal of form for :
13 025031 All types of bridge sub-structures, e.g. pier, abutment,
wing wall, retaining wall, RCC box type foundations,
Abutment cap, Pier Cap, Inspection Platform & Pedestal
over Pier cap, Fender wall, Diaphragm wall etc. up to 5m
above ground level
14 025032
All types of bridge super-structures, e.g. slabs, I-girders,
T-girders, Box girders etc. up to 5m above ground level.
15 025033 Extra for additional height over item no. 025031 &
025032 wherever required with adequate bracing,
propping etc. over initial height of 5 metres for every
additional height of 1 metre or part thereof.
Supply and using Cement at Worksite
16 025071 Ordinary Portland Cement 43 grade approved
brands/makes
 Supply of steel reinforcement of approved brands/makes
for R.C.C. work including straightening, cutting, bending,
placing in position and binding all complete.
17 025082 Thermo-Mechanically Treated bars of grade Fe-500D or
more of approved brands/makes.

Providing and laying in position machine batched,

machine mixed and machine vibrated Cement Concrete
of specified grade as per approved Design Mix (mixed in
Mobile Concrete Batching/Mixing Plant at site or RMC
from approved plants) using 20mm graded crushed
stone aggregate and coarse sand of approved quality for
cast in-situ Prestressed (Posttensioned) concrete girder /
Box girders/Slabs for different spans including finishing,
using Plasticiser in approved proportions (as per
IS:9103), to modify workability without impairing strength
and durability complete as per drawings, specifications
and direction of the Engineer in-charge. Note: 1.
Payment for Staging, Shuttering, Cement, reinforcement,
HTS cables, sheathing, anchorage cones, stressing of
cables and grouting of the ducts shall be made extra
under relevant items. 2. Plasticiser shall invariably be
used in approved proportion to increase workability with
minimum possible quantity of cement for all grade of
Design Mix Concrete unless it is specifically approved
citing reasons at the stage of Mix Design and in that
case deduction shall be made as per relevant item.
18 031011 With Soffit level up to 9m above Bed level
19 031040

Providing, fabricating & fixing in position to exact design

profiles, H.T.S. cables of all classification made from
Low Relaxation strands conforming to IS:14268-latest
version in Prestressed (Post-tensioned) Concrete
girders/slabs etc. including supplying, cutting, making
into cables with necessary spacers, colour coding,
protecting with water soluble oil at all time, anchoring of
cables, supplying and placing spiral corrugated type
galvanized metal steel ducts sheathing made up of Cold
Rolled Cold Annealed (CRCA) mild steel conforming to
IS:513 of required diameter/ thickness, vent pipe,
placing, bending, routing, fixing, stressing & grouting of
cable ducts with cement grout, Anchorage sets in
required number with provision for future prestressing if
any including all lead and lift with contractor's own
materials, labour, equipments etc. complete as per
drawings & specifications. Rate also includes covering
anchorage pads with epoxy mortar of approved quality to
avoid corrosion. Cement for grouting to be paid
separately. Payment shall be made in terms of weight of
HTS cables as per drawing.
20 031060 Extra for using HDPE sheathing in place of CRCA
sheathing
21 031070 Making suitable designed staging for cast in-situ PSC
girders/slabs up to 10.5m height from bed level up to
soffit of girder/slab with all contractors materials,
machinery, tools and plants, transportation complete in
all respects required for casting and removal of the same
after completing the work and restoring the site to
original. Note: The payment for staging shall be made on
the cubical quantity of concrete of main Girders/slabs.
22 031120
Casting and installation of single/twin RCC box of all
sizes with or without common web section including
design of pushing scheme, thrust bed, casting of all RCC
components, with specified grade of controlled concrete,
pushing it in correct position and alignment below
Railway track/Road following all measures of track safety
by 'Box pushing technique" as per approved
drawings/scheme, with or without surcharge in all types
of soils with disposal of surplus earth away from vent up
to 1 Km, fixing arrangement for all services & utilities
including parapet walls on both sides, wearing course,
foot paths, plaques, drainage arrangements etc. and all
other incidental works to complete the ROB/RUB/Canal
crossing in all respect as per specifications to the
satisfaction of Engineer-in-Charge. Note: 1. The rate
includes all items of work/supplies for complete job in all
respects except "cost of Reinforced cement concrete,
cement, reinforcement & shuttering" of (i) main RCC
Box; (ii) Thrust Bed; (iii) Footpath (iv) Parapet wall and
(v) wearing Course only, which shall be paid extra under
relevant items of USSOR. 2. In case Drag Sheet and/or
Rail Cluster are to be used as per approved scheme and
design, the same shall be paid extra under relevant item.
3. The payment for this item shall be made for the clear
inner cross section area of the parent RCC Box/Boxes
and barrel length i.e. clear inner volume of parent RCC
Box/Boxes.
23 031140

Fabrication, insertion and removal of rail cluster below

the running track to ensure safety of track during box
pushing in correct position and alignment with Railway
rails and contractors MS flats, wooden blocks, and 12
mm dia bolts etc., as per approved drawing including
removing and filling back of ballast below track under
traffic conditions of Electrified/Non-Electrified section
with all contractors, labour, tools, tackles, consumables
plants, and 50MT capacity crane and any other material
required for execution of work in all respect with all lead
and lift, transportation and as directed by Engineer in-
charge. Payment quantity shall be as per the weight of
rail in rail cluster used at site or as per approved
drawing, whichever is minimum.
 Providing and fixing in position GI Drainage Spouts of
required length with Grating in RCC slab and filling
bitumen along kerb as shown in drawing with
contractor's pipes, bitumen, tools, equipment, lead, lifts
etc. complete as per specifications and as directed by
Engineer in-charge.
24 031192 100mm dia. Drainage Spouts

Supplying, fabrication, assembling of all types of steel

girders of specified spans with structural steel
conforming to Quality "B0" Grade Designation E250
conforming to IS:2062, erection / slewing / end launching
of steel girders with cranes or any other approved
launching methods as per site conditions (not requiring
traffic block) on sub-structure including provision of
trolley refuges etc., complete as per approved QAP and
drawings conforming to IRS-B1-2001 and other relevant
codes and specifications. Note: 1. Detailed fabrication
and erection drawings & launching methodology will be
prepared by the contractor and got approved from
Railway. 2. The rate is all inclusive including launching in
position, complete in all respect except cost of (i)
Painting / Metalising; (ii) Bearings & (iii) HSFG bolts
which shall be paid extra under relevant item. 3. The
payment shall be made on the theoretical weight of main
components and gusset plates only. 4. Payment
Schedule: (i) Receipt of material at site: 40% (ii)
Fabrication of girders: 20% (iii) Erection/Launching: 20%
(iv) Completion in all respects: 20%
25 041012 Open web Girder
26 041013 Extra for using steel conforming to Grade Designation
E350 instead of Grade Designation E250 of Quality "B0"
as per IS: 2062
27 041014 Deduct for using steel conforming to Quality "BR"
instead of Quality "B0" of Grade designation E250 as per
IS:2062.
28 041020
Supplying and fixing HSFG bolts of any dia and any
length with suitable nuts including DTI washers
conforming to IRS-B1-2001 for bridges and steel
structures with contractors labour, tools and plants and
lead and lift etc., complete.
 Metallizing of steel work of girders with sprayed
aluminium after surface preparation by Sand/grit
blasting, followed by one coat of etch primer (IS:5666) &
one coat of Zinc Chrome primer (IS:104) and two coats
of aluminium paint (IS:2339) with all labour, T&P and
material as a complete job duly conforming to all
relevant specifications and process given under Clause
39 of IRS-B1-2001. Note: Nominal Thickness of sprayed
Aluminium coating shall be 150 microns. DFT of Zinc
chrome primer shall be 25-30 microns and DFT of each
coat of Aluminium paint shall be 1214 microns.
29 041041 On new girder during fabrication
30 041050

Providing and fixing railing used in rows for footpath or

anti-crash barrier railing with B class G.I. pipe 65/50 mm
nominal dia including cost of M.S. angle and channels in
vertical posts, welding / bolting, priming painting with one
coat ready mix Zinc Chromate conforming to IS:104 with
DFT of 25-30Microns, followed by one coat of Zinc
Chrome red oxide conforming to IS:2074 with DFT of 25
Microns with all material, labour, T&P as a complete job.
Note: Cost of painting shall be paid extra under relevant
item.

Providing and fixing various size HTS holding down bolts

conforming to relevant Codes/Specification in concrete
column or in other structures with proper nuts, bolts,
washers/plates, grouting of holes with cement or epoxy
concrete with all material, labour, T&P as a complete job.
31 041071 With Cement Grout. Cost of cement shall be paid extra.

32 041080

Supplying, Fabricating and fixing access ladders,

inspection platforms, Trolley refuges etc., on bridges with
structural steel conforming to IS:2062 including welding /
bolting, priming painting with one coat of ready mixed
paint of Zinc Chromate (IS:104) with DFT of 25-30
microns followed by one coat of Zinc Chrome Red Oxide
(IS:2074) with DFT of 25 microns with all material,
labour, T&P as a complete job. Note: Painting shall be
paid separately under relevant item.
 Design, supply, fitting and fixing in position true to line
and level POT-PTFE bearing of 250 MT Capacity,
consisting of a metal piston supported by a disc or un
reinforced elastomer confined within a metal cylinder,
sealing rings, dust seals, PTFE surface sliding against
stainless steel mating surface, complete assembly to be
of cast steel / fabricated structural steel, metal and
elastomer elements complete as per IS:2062, IS:1030,
AISI:304, AISI:316, IS:6911, BS:3784, IS:3400, IS:226,
BS-5400, Bridge Code and as per approved drawing and
Technical Specifications. The design of the bearings
shall be submitted by the manufacturers / contractor and
got approved from Railway before fixing. Test report
after inspection of the bearings shall be submitted and
got approved before the materials are lifted from the
manufacturer premises.
33 041131 POT-cum -PTFE Bearing (Free end)
34 041132 POT Bearing-Fixed Type
35 041133 POT-cum -PTFE Guided (L)Bearing
36 041134 POT-cum -PTFE Guided (T)Bearing

Design, supply, fitting and fixing in position true to line

and level POT-PTFE bearing of 150 MT Capacity,
consisting of a metal piston supported by a disc or un
reinforced elastomer confined within a metal cylinder,
sealing rings, dust seals, PTFE surface sliding against
stainless steel mating surface, complete assembly to be
of cast steel / fabricated structural steel, metal and
elastomer elements complete as per IS:2062, IS:1030,
AISI:304, AISI:316, IS:6911, BS:3784, IS:3400, IS:226,
BS-5400, Bridge Code and as per approved drawing and
Technical Specifications. The design of the bearings
shall be submitted by the manufacturers / contractor and
got approved from Railway before fixing. Test report
after inspection of the bearings shall be submitted and
got approved before the materials are lifted from the
manufacturer premises.
37 041151 POT-cum -PTFE Bearing (Free end)
38 041152 POT Bearing-Fixed Type
39 041153 POT-cum -PTFE Guided (L)Bearing
40 041154 POT-cum -PTFE Guided (T)Bearing
 Painting of cleaned plate/composite bridge girders
including all scaffolding along with provision of Jhoola /
hanging scaffolding ladders etc. where required.
41 041263 With two coats of Aluminium paint in dual containers
conforming to IS:2339 with DFT of 15 - 20 Microns for
each coat.

Launching in position, by any approved method,

prefabricated Steel Girders, precast PSC girders/slabs,
casted at casting bed developed at site, to correct
alignment and level over the bed block / pedestal with all
required arrangements, complete in all respect.
42 041321 PSC girders / slabs
43 041370

Supplying fabricating and erecting welded and/or bolted

and/or riveted steel work in built up sections, trusses and
framed work, staging, racks, Height Gauge etc. for Steel
Structures other than bridge girders, using RSJ, tees,
angles and channels/flats, plates, gussets, round or
square bars, cleats, bolts etc., with contractors own steel
including cutting, bending, straightening, drilling, riveting,
hoisting, fixing, erecting, welding, bolting etc., with
Providing stiffeners wherever required as per approved
drawing including applying a priming coat of a approved
steel primer with all contractor's materials, labour, tools
& plants, lead & lift including crossing of tracks if
required etc., complete as per specification and as
directed by Engineer-in-charge. Note: The payment shall
be made on the theoretical weight of main components
and gusset plates only.
44 052260 Dewatering of natural or accumulated water from any
location. Payment to be done for Horse power of pump
multiplied by pumping hours.
45 181030
Dismantling exiting Rail Height Gauge carefully and
stacking the released material in countable manner, free
from any infringements as directed by Engineer in-
Charge including removal of cement concrete foundation
and making surface clean.
Painting speed breakers with paint of approved quality &
colour over the Bituminous/ Concrete surface near
approaches to level crossing.
46 184023 With Hot melt thermoplastic road marking paint
 Hiring of machinery for minor miscellaneous works for
short duration including operator/driver, fuel, lubricants
and consumable. The contractor shall arrange all
statutory permits as required by rules and regulations
prevailing in the area of work. Payment shall be made for
actual working hours at site.
47 211201 JCB Backhoe Loaders 3DX Plus or similar with minimum
1.10 cum bucket capacity

ScheduleSchedule B-DSR 2021 Items

Item- 1 DSR 2021 Items
S No. Item No Description of Item
4.0 CONCRETE WORK
4.1S CEMENT CONCRETE (CAST IN SITU)
Providing and laying in position cement concrete of
4.1 specified grade excluding the cost of centering and
shuttering - All work up to plinth level :
4.1.2 1:1.5:3 (1 Cement: 1.5 coarse sand (zone-III) derived
1 from natural sources : 3 graded stone aggregate 20 mm
nominal size derived from natural sources)
5.0 REINFORCED CEMENT CONCRETE
5.9S FORM WORK
Centering and shuttering including strutting, propping
5.9 etc. and removal of form for
5.9.1 Foundations, footings, bases of columns, etc. for mass
2
concrete
5.9.3 Suspended floors, roofs, landings, balconies and access
3
platform

Extra for additional height in centering, shuttering where

5.11 ever required with adequate bracing, propping etc.,
including cost of de-shuttering and decentering at all
levels, over a height of 3.5 m, for every additional height
of 1 metre or part thereof (Plan area to be measured).
5.11.1 Suspended floors, roofs, landing, beams and balconies
4
(Plan area to be measured)
5.33S DESIGN MIX CONCRETE
 Providing and laying in position ready mixed or site
batched design mix cement concrete for reinforced
cement concrete work; using coarse aggregate and fine
aggregate derived from natural sources, Portland
Pozzolana / Ordinary Portland /Portland Slag cement,
admixtures in recommended proportions as per IS: 9103
to accelerate / retard setting of concrete, to improve
durability and workability without impairing strength;
including pumping of concrete to site of laying, curing,
carriage for all leads; but excluding the cost of centering,
shuttering, finishing and reinforcement as per direction of
5.33 the engineer-in-charge; for the following grades of
concrete. Note: Extra cement up to 10% of the minimum
specified cement content in design mix shall be payable
separately. In case the cement content in design mix is
more than 1.10 times of the specified minimum cement
content, the contractor shall have discretion to either re-
design the mix or bear the cost of extra cement.

5.33.1 All works upto plinth level

5.33.1.1 Concrete of M25 grade with minimum cement content of
5
330 kg /cum
5.33.2 All works above plinth level upto floor V level
5.33.2.1 Concrete of M25 grade with minimum cement content of
6
330 kg /cum
6.0 MASONRY WORK
Brick work with common burnt clay F.P.S. (non modular)
6.1 bricks of class designation 7.5 in foundation and plinth
in:
7 6.1.1 Cement mortar 1:4 (1 cement : 4 coarse sand)
10.0 STEEL WORK

Steel work in built up tubular (round, square or

10.16 rectangular hollow tubes etc.) trusses etc., including
cutting, hoisting, fixing in position and applying a priming
coat of approved steel primer, including welding and
bolted with special shaped washers etc. complete.
8 10.16.1 Hot finished welded type tubes
 10.28

Providing and fixing stainless steel ( Grade 304) railing

made of Hollow tubes, channels, plates etc., including
welding, grinding, buffing, polishing and making
curvature (wherever required) and fitting the same with
9 necessary stainless steel nuts and bolts complete, i/c
fixing the railing with necessary accessories & stainless
steel dash fasteners , stainless steel bolts etc., of
required size, on the top of the floor or the side of waist
slab with suitable arrangement as per approval of
Engineer-in-charge, (for payment purpose only weight of
stainless steel members shall be considered excluding
fixing accessories such as nuts, bolts, fasteners etc.).
12.0 ROOFING
12.1S SHEET ROOFING

Providing corrugated G.S. sheet roofing including

vertical / curved surface fixed with polymer coated J or L
hooks, bolts and nuts 8 mm diameter with bitumen and
12.1 G.I. limpet washers or with G.I. limpet washers filled with
white lead, including a coat of approved steel primer and
two coats of approved paint on overlapping of sheets
complete (up to any pitch in horizontal/ vertical or curved
surfaces), excluding the cost of purlins, rafters and
trusses and including cutting to size and shape wherever
required.
12.1.3 0.63 mm thick with zinc coating not less than 275 gm/
10
sqm
13.0 FINISHING
13.1S CEMENT PLASTER (IN FINE SAND)
13.1 12 mm cement plaster of mix :
11 13.1.1 1:4 (1 cement: 4 fine sand)
Applying priming coats with primer of approved brand
13.85 and manufacture, having low VOC (Volatile Organic
Compound ) content.
Distempering with 1st quality acrylic distember (Ready
mix) having VOC content less than 50 grams/ litre of
13.90 approved brand and manufacture to give an even
shade :
12 13.90.1 Old work (one or more coats)
15.0 DISMANTLING AND DEMOLISHING
 15.2 Demolishing cement concrete manually/ by mechanical
means including disposal of material within 50 metres
lead as per direction of Engineer - in -charge.
15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent
13
design mix)
15.3 Demolishing R.C.C. work manually/ by mechanical
14 means including stacking of steel bars and disposal of
unserviceable material within 50 metres lead as per
direction of Engineer - in- charge.
Demolishing brick work manually/ by mechanical means
15.7 including stacking of serviceable material and disposal of
unserviceable material within 50 metres lead as per
direction of Engineer-in-charge.
15 15.7.4 In cement mortar
16.0 ROAD WORK
16.1S ROADS
16.3 Supplying and stacking at site.
16 16.3.1 90 mm to 45 mm size stone aggregate
17 16.3.2 63 mm to 45 mm size stone aggregate
18 16.3.3 53 mm to 22.4 mm size stone aggregate
19 16.3.6 Stone screening 13.2 mm nominal size (Type A)
20 16.3.7 Stone screening 11.2 mm nominal size (Type B)
21 16.3.10 Moorum
16.4
Laying, spreading and compacting stone aggregate of
specified sizes to WBM specifications in uniform
thickness, hand picking, rolling with 3 wheeled
22 road/vibratory roller 8-10 tonne capacity in stages to
proper grade and camber, applying and brooming
requisite type of screening / binding material to fill up
interstices of coarse aggregate, watering and
compacting to the required density .
16.30S PREMIX CARPET

Providing and applying tack coat using hot straight run

16.30 bitumen of grade VG - 10, including heating the bitumen,
spraying the bitumen with mechanically operated spray
unit fitted on bitumen boiler, cleaning and preparing the
existing road surface as per specifications :
23 16.30.2 On bituminous surface @ 0.50 Kg / sqm
Providing and applying tack coat using bitumen emulsion
16.31 conforming to IS:8887, using emulsion pressure
distributer including preparing the surface & cleaning
with mechanical broom.
 Providing and laying bitumen mastic wearing course (as
per specifications) with industrial bitumen of grade 85/25
conforming to IS : 702, prepared by using mastic cooker
and laid to required level and slope, including providing
16.37 antiskid surface with bitumen precoated fine grained
hard stone chipping of approved size at the rate of 0.005
cum per 10 sqm and at approximate spacing of 10 cm
centre to centre in both directions, pressed into surface
protruding 1 mm to 4 mm over mastic surface, including
cleaning the surface, removal of debris etc. all complete.
(Considering bitumen using 10.2% as per MORTH
specification).
24 16.37.2 40 mm thick
16.49S MISCELLANEOUS
16.69

Providing and laying at or near ground level factory

made kerb stone of M-25 grade cement concrete in
position to the required line, level and curvature, jointed
with cement mortar 1:3 (1 cement: 3 coarse sand),
25 including making joints with or without grooves
(thickness of joints except at sharp curve shall not to
more than 5mm), including making drainage opening
wherever required complete etc. as per direction of
Engineer-in-charge (length of finished kerb edging shall
be measured for payment). (Precast C.C. kerb stone
shall be approved by Engineer-in-charge).
18.0 WATER SUPPLY
18.7S C.P.V.C. PIPES
Providing and fixing G.I. pipes complete with G.I. fittings
18.10 and clamps, i/c cutting and making good the walls etc.-
Internal work - Exposed on wall
26 18.10.5 40 mm dia nominal bore
 Grit 25
Sand 35
Cement 200
Steel 55

a invites E-Tenders against Tender No Br-JHS-2024-07

iginal/revised bids upto closing date and time only.
eceived shall be ignored.

C No. 341 (Km 1074/810) in

Two Packet System

01/05/2024 12:25
Not Applicable

BRIDGELINE

90
18 Months
Expenditure
Yes
Capital (Works)

Qty Unit Unit Rate Basic Value Escl.(%) Amount

345222271.19

316050783.84 9.23 345222271.19

Qty Unit Unit Rate Basic Value Escl.(%) Amount

 24994263.18

24994263.18 AT Par 24994263.18

Qty Unit Unit Rate Basic Value Escl.(%) Amount

32550646.40

cum 13588.48 13928192.00 AT Par 13928192.00

prepared surface with specified graded stone aggregate for wearing course, mixing of bitumen, filler & stone
g with mechanical paver finisher fitted with electronic sensing device to theATrequired level and grade and rolling
facia panels Sqm
as per the design7392.38
and drawings and 7392380.00 Par Charge
direction of the Engineer-in- 7392380.00
all complete with all
omplete. Item to include all incidental work required to complete the job as per drawing and specifications.
cum 2322.42
. All incidental work required to complete6967260.00 AT Par
the job shall be included 6967260.00
in the quoted rates. The item shall be
laced in position excluding the volume of filter media at behind the RS walls.
Kg 1119.50 1119500.00 AT Par 1119500.00
of regular flux core wire in all site welding.
MT 8271.88 3143314.40 AT Par 3143314.40
over bridges (all spans) under traffic & power block.

Unit Qty Rate Amount

cum 1500.00 281.85 422775.00

Metre 400.00 112.03 44812.00

cum 5300.00 196.66 1042298.00
cum 13100.00 1114.41 14598771.00

cum 1080.00 3562.71 3847726.80

cum 410.00 3667.29 1503588.90

cum 1980.00 3645.58 7218248.40

cum 600.00 3725.25 2235150.00

cum 900.00 3725.25 3352725.00
cum 1055.00 3765.08 3972159.40

cum 3200.00 3685.41 11793312.00

cum 900.00 4010.14 3609126.00

Sqm 5250.00 661.48 3472770.00

Sqm 12500.00 860.71 10758875.00

Sqm 1000.00 106.15 106150.00

MT 5000.00 8153.06 40765300.00

Kg 1200000.00 80.14 96168000.00

cum 2050.00 3765.08 7718414.00

MT 81.00 190323.94 15416239.14

Metre 7130.00 164.39 1172100.70

cum 1850.00 2300.35 4255647.50

cum 530.00 4623.01 2450195.30

MT 100.00 4243.26 424326.00

Metre 100.00 1261.63 126163.00

MT 380.00 117344.49 44590906.20

MT 380.00 3077.26 1169358.80

MT 380.00 -3077.26 -1169358.80

Kg 4000.00 169.56 678240.00

Sqm 1800.00 665.66 1198188.00
Kg 8000.00 90.12 720960.00

Kg 1600.00 127.50 204000.00

MT 6.00 77002.42 462014.52

Each 2.00 79121.36 158242.72
Each 2.00 101205.39 202410.78
Each 2.00 124368.89 248737.78
Each 2.00 117682.40 235364.80

Each 56.00 44440.60 2488673.60

Each 56.00 51512.97 2884726.32
Each 56.00 64937.49 3636499.44
Each 56.00 60411.64 3383051.84
Sqm 700.00 93.17 65219.00

MT 5880.00 1623.02 9543357.60

MT 100.00 87491.62 8749162.00

HP Hour 444.00 45.37 20144.28

Each 2.00 3387.66 6775.32

Sqm 150.00 131.85 19777.50

Hour 100.00 794.59 79459.00

Total 316050783.84

Unit Qty Rate Amount

cum 30 7783.65 233509.5

Sqm 5360 307.95 1650612

Sqm 400 766.55 306620

Sqm 810 319.25 258592.5

cum 260 8683.8 2257788

cum 96 10306.2 989395.2

cum 60 6882 412920

Kg 24000 154.9 3717600

Kg 1400 612.25 857150

Sqm 1800 978 1760400

Sqm 250 294.85 73712.5

Sqm 222 56.8 12609.6

cum 20 2007.1 40142

cum 30 2928.1 87843

cum 25 1698.45 42461.25

cum 1130 1937.6 2189488

cum 1630 1624.5 2647935
cum 880 1837.25 1616780
cum 320 1865 596800
cum 63 2065.7 130139.1
cum 339 888.3 301133.7
cum 4749 865.8 4111684.2

Sqm 9950.05 36.6 364171.83

Sqm 100 1163.1 116310

cum 6 8613.55 51681.3

Metre 230 725.15 166784.5

Total 24994263.18
Mixing 800
Earth 400
M-35 3730
Concrete 2230

idding Unit

Above/
Below/Par
7 321056712.21 367092639.87
8.8573604312

idding Unit
 Above/
Below/Par
20 19995410.544

Bidding
Unit
Above/
Below/Par
20 26040517.12
9500 9737500 17978900 26968350 17.1495715673
umen, filler & stone
and grade and rolling 3091.4 3091400
all complete with all
nd specifications. 0
es. The item shall be 400 1200000
0
150 150000
0
10000 3800000
200 300000 215320450 322980675 6.44268868093

300 120000
 0
150 795000
700 9170000

2730 2948400

2730 1119300
 0 0

0
2230 1338000
2230 2007000
2230 2352650

2230 7136000

2230 2007000

350 1837500

500 6250000

50 50000
0

4000 20000000
 0

63.65 76380000

0
2230 4571500
110000 8910000

50 356500

1000 1850000
2500 1325000

2500 250000
 0
1500 150000

0
100000 38000000

0 0

0 0

150 600000
 0
600 1080000

85 680000

150 240000

80000 480000
 0
70000 140000
70000 140000
80000 160000
80000 160000

0
35000 1960000
35000 1960000
40000 2240000
40000 2240000
 0

100 70000

0
900 5292000

85000 8500000

25 11100

3000 6000

0
250 37500
 0

1000 100000
0

0
0

3730 111900 12025901.25 18038851.88 27.8280309962

0
0

275 1474000

600 240000

50 40500
0
 0
0

1320 343200
0

0 0
0

0
4500 270000
0

0
80 1920000
425 595000
0
0

700 1260000
0
0
0
250 62500

0
100 22200
0
 0

1500 30000

1500 45000

0
800 20000
0
0
0
875 988750
875 1426250
875 770000
875 280000
875 55125
475 161025

300 1424700
0

0
25 248751.25

0
 0
800 80000
0

7000 42000
0
0

0
500 115000
245325251.25
50% 122662625.625
367987876.875 8.635088844257