CCWF1000EV

Centrifugal Chiller Report
Project Name:Binh Duong Hospital Tag Name:CCWF1000EV
Unit Information
Chiller Model ----------------------CCWF1000EV# Number of Stage--------------------------------- 2
Oil Type --------------------------------------- POE Compressor Code ----------------------- V8 Series
Oil Charge ------------------------------------ 20 L Motor Code -------------------- EKBS-630K Series
Refrigerant --------------------------------- R134a Unit Power Supply ------------ 380V/50Hz 3P+PE
Refrigerant Charge -------------------------600 kg Control Power Supply -------- 380V/50Hz 3P+PE
Shipping Weight ------------------------ 11650 kg Starting Type ------------------------- VFD Starter
Running Weight ------------------------- 13350 kg Mounted Type of Starter Panel --- Unitmounted
Length -----------------------------------4950 mm Width ------------------------------------ 2200 mm
Height -----------------------------------2900 mm
*Due to additional options and manufacturing deviation, the weight and dimension data in this
report are for reference only, and the actual weight and dimension of the unit are subject to the
actual product.
*The refrigerant charge amount in this report is for reference only. The refrigerant charge amount
is subject to the product nameplate.
# is the production serial number. The specific model please refer to the actual product.
Acoustic Data [dBA]

100%Load 75%Load 50%Load 25%Load
81.25 79.87 77.1 78.22
100% Load Spectrum
63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
41.5 57.4 62.47 68.62 69.66 76.13 78.43 65.79
Sound Pressure (dB) measured in accordance with ANSI/AHRI Standard 575-2017(A-weighted)
TOLERANCES: The sound level of identical unit selections can vary due to manufacturing tolerance
and test repeatability.Variations of ±3 dBA on the Acoustic Data is possible.
Performance Information
Cooling Capacity ----------------------- 1000 Tons Cooling Input Power -------------------- 618.9 kW
COP.R ------------------------------- 5.681 kW/kW NPLV.IP(AHRI) ---------------------- 9.843 kW/kW
Power Input per Capacity(COP) - 0.6189 kW/Ton Power Input per Capacity(NPLV) 0.3572 kW/Ton
Evaporator Information
Entering Fluid Temp --------------------- 12.50 ℃ Code -------------------------------------- J3 Series
Leaving Fluid Temp ----------------------- 5.00 ℃ Tubing ------------------ EI-1in, 0.635mm, Copper
Flow Rate ----------------------------- 402.3 m3/h Passes -------------------------------------------- 3
Fluid Pressure Drop ---------------------- 105 kPa Waterboxes ---------- Nozzle-in-Head / 1.0 MPa
Fouling Factor ----------------- 0.0176 m2-℃/kW Nozzle ------------------------------------- DN300
Fluid Type ---------------------------- FreshWater Concentration --------------------------------- 0 %
Condenser Information
Entering Fluid Temp --------------------- 32.00 ℃ Code ------------------------------------- N3 Series
Leaving Fluid Temp ---------------------- 37.00 ℃ Tubing ----------------- CI-1in, 0.635mm, Copper
Flow Rate ----------------------------- 709.6 m3/h Passes -------------------------------------------- 2
Program Version:v3.0.4 Sales Manager:User

Database Version:V3.0.4 Selected by:Support
Date:8/8/2024 Page 1/10 MCS
Fluid Pressure Drop ---------------------- 60.5 kPa Waterboxes ---------- Nozzle-in-Head / 1.0 MPa
Fouling Factor ----------------- 0.0440 m2-℃/kW Nozzle ------------------------------------- DN300
Fluid Type ---------------------------- FreshWater Concentration --------------------------------- 0 %
Heat Rejection Capacity ---------------- 4096 kW
Electrical Information
Full Load Amps -------------------------- 1011.0 A Locked Rotor Amps ----------------------- 6246 A
Starting Current ------------------------ <1011.0 A
General
Refrigerant Shipment ----- Shipped inside Chiller Oil Shipment ------------ Shipped in Compressor
Hot Gas Bypass --------------------------- Installed Insulation Thickness ----------------------- 20mm
Anti-vibration Configuration --------------- None Motor Protection ---------------------------- IP54
Shipping Method ------ Whole Machine Delivery Packaging OptionsMiddle Packaging (shrink wrap + steel base)
Waterboxes
Evaporator
Nozzle ArrangementsRight Side of Control Panel Connection ------------------------------- Flanged
Condenser
Nozzle ArrangementsRight Side of Control Panel Connection ------------------------------- Flanged
Sound
Compressor Silencer ---------------- Not Installed Condenser Sound Reduction ------- Not Installed
Discharge Line Sound Reduction --- Not Installed
Electrical
Communication ---------------------------- RS485 Controller ----------------------- Midea Controller
Protocol -----------------------------Modbus RTU Switch Gear Brand ------------------------ Default
Screen Size ---------------------------------- 10 in. Starter Panel Line Arrangement --------------------- Top in
Certified in accordance with the AHRI Water-Cooled Water-Chilling and Heat Pump Water-Heating
Packages Certification Program, which is based on AHRI Standard 550/590 (I-P) and AHRI Standard
551/591 (SI). Certified units may be found in the AHRI Directory at: www.ahridirectory.org.

Calculation:IPLV.IP
Percenta Cooling Input Power COP.R Evaporator Condenser Weightin IPLV.IP

ge of Capacity Power Input per EEFT ELFT Flow CEFT CLFT Flow g Factor
Full Load Capacity Rate Rate
Tons kW kW/Ton kW/kW ℃ ℃ m3/h ℃ ℃ m3/h - kW/Ton kW/kW
100% 1000 534.5 0.5345 6.578 12.22 6.67 543.2 29.44 34.61 672.6 0.01 0.3213 10.94
75% 750.0 285.8 0.3811 9.227 10.83 6.67 543.2 23.89 27.61 672.6 0.42
50% 500.0 136.3 0.2727 12.89 9.44 6.67 543.2 18.33 20.74 672.6 0.45
25% 250.0 87.90 0.3516 10.00 8.05 6.67 543.2 18.33 19.56 672.6 0.12

14
12
10
COP(kW/kW)
0
20 30 40 50 60 70 80 90 100
Percent of Full Load(%)

Calculation:NPLV.IP
Percenta Cooling Input Power COP.R Evaporator Condenser Weightin NPLV.IP

ge of Capacity Power Input per EEFT ELFT Flow CEFT CLFT Flow g Factor
Full Load Capacity Rate Rate
Tons kW kW/Ton kW/kW ℃ ℃ m3/h ℃ ℃ m3/h - kW/Ton kW/kW
100% 1000 618.9 0.6189 5.681 12.50 5.00 402.3 32.00 37.00 709.6 0.01 0.3572 9.843
75% 750.0 323.2 0.4310 8.158 10.62 5.00 402.3 25.17 28.74 709.6 0.42
50% 500.0 150.3 0.3006 11.70 8.74 5.00 402.3 18.33 20.63 709.6 0.45
25% 250.0 96.22 0.3849 9.135 6.87 5.00 402.3 18.33 19.50 709.6 0.12

14
12
10
COP(kW/kW)
0
20 30 40 50 60 70 80 90 100

Calculation:Loadline 1
Percentage of Cooling Input Power COP.R Evaporator Condenser Weighti IPLV/NP

Full Load Capacity Power Input EEFT ELFT Flow Fluid CEFT CLFT Flow Fluid ng LV/CPLV
per Rate Pressure Rate Pressure Factor
Capacity Drop Drop
Tons kW kW/Ton kW/kW ℃ ℃ m3/h kPa ℃ ℃ m3/h kPa - kW/kW
100.0 % 1000 618.9 0.6189 5.681 12.50 5.00 402.3 105 32.00 37.00 709.6 60.5 0 0.000
90.0 % 900.0 538.4 0.5982 5.878 11.75 5.00 402.3 106 32.00 36.48 709.6 60.5 0
80.0 % 800.0 471.3 0.5892 5.968 11.00 5.00 402.3 106 32.00 35.97 709.6 60.5 0
70.0 % 700.0 409.2 0.5846 6.015 10.25 5.00 402.3 107 32.00 35.46 709.6 60.5 0
60.0 % 600.0 350.8 0.5847 6.013 9.49 5.00 402.3 107 32.00 34.97 709.6 60.5 0
50.0 % 500.0 322.8 0.6455 5.447 8.74 5.00 402.3 108 32.00 34.51 709.6 60.5 0
40.0 % 400.0 289.0 0.7225 4.866 7.99 5.00 402.3 108 32.00 34.04 709.6 60.5 0
30.0 % NA NA NA NA NA 5.00 402.3 NA 32.00 NA 709.6 NA 0
Note:

5
COP(kW/kW)
0
10 20 30 40 50 60 70 80 90 100

Evaporator Fluid Pressure Drop
160
140
Fluid Pressure Drop(kPa)

120
100
80
60
40
20
0
0 30 60 90 120 150
Flow Rate(L/s)
Condenser Fluid Pressure Drop
100
80
Fluid Pressure Drop(kPa)
60
40
20
0
0 50 100 150 200 250
Flow Rate(L/s)

A mm 4950
B mm 2200
C mm 2900
* This outline is intended only as a dimension representation of length, width and height.

Date:8/8/2024 Page 10/10 MCS

CCWF1000EV

Uploaded by

Copyright:

Available Formats

CCWF1000EV

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

CCWF1000EV

Uploaded by

Copyright:

Available Formats

Centrifugal Chiller Report

Project Name:Binh Duong Hospital Tag Name:CCWF1000EV

Acoustic Data [dBA]

Program Version:v3.0.4 Sales Manager:User

Program Version:v3.0.4 Sales Manager:User

Percenta Cooling Input Power COP.R Evaporator Condenser Weightin IPLV.IP

Program Version:v3.0.4 Sales Manager:User

Program Version:v3.0.4 Sales Manager:User

Percenta Cooling Input Power COP.R Evaporator Condenser Weightin NPLV.IP

Program Version:v3.0.4 Sales Manager:User

Program Version:v3.0.4 Sales Manager:User

Percentage of Cooling Input Power COP.R Evaporator Condenser Weighti IPLV/NP

Program Version:v3.0.4 Sales Manager:User

Program Version:v3.0.4 Sales Manager:User

Fluid Pressure Drop(kPa)

Condenser Fluid Pressure Drop

Program Version:v3.0.4 Sales Manager:User

Program Version:v3.0.4 Sales Manager:User

You might also like