Introduction To EMI
Introduction To EMI
Instruments
EE - 306
3rd Semester
Electrical Engineering
Examination scheme
Teaching Scheme
Class
Room
Contact
Hrs
45
Examination Scheme
Practical
Activity
Based
Learning
Credits
University
Examination
Mid Sem
Examination
Continuous
Evaluation
Total
Marks
00
00
60
25
15
100
Text Books:
Electrical and Electronic Measurements and Instrumentation, A. K.
Sawhney, Dhanpatrai and Sons, New Delhi.
Modern Electronic Instrumentation and Measuring Techniques, Cooper D.
and A.D. Heifrick, P.H.I.
Teaching Scheme
Class
Room
Contact
Hrs
00
Examination Scheme
Practical
Activity
Based
Learning
Credits
University
Examination
Mid Sem
Examination
Continuous
Evaluation
Total
Marks
30
00
40
--
60
100
Syllabus
Measurements
Analog meter, extension of instrument range
Instrument transformer
Measurement of resistance, Potentiometers and AC
bridges
Measurement of energy and power
Cathode Ray Oscilloscope (CRO), Electronic instruments
Sensors and transducers
Accessories for measuring instruments
Electronics
Deal with semiconductors
Measurement
The measurement of given quantity is
essentially an act or the result of comparison
between the quantity (whose magnitude is
unknown) and a predefined standard.
Result must be numerical value.
Measurement is the process by which one can
convert physical parameters to meaningful
numbers.
Significance of measurement
Advancement in technology depends upon
measurement tech.
Major function of engineering
Design of equipment and process
Operation and maintenance of that
Both functions above require measurements
Measurement confirms
validity of hypothesis
Add its understanding
Types of methods
Direct method
the unknown quality
(also called the
measurand) is directly
compared against a
standard
Result = numerical
number + unit
Ex. Mass = 2 kg
Indirect method
Direct method always
not possible, feasible or
practicable
Measuring other
functionally related
quantities and
calculating the desired
quantity rather than
measuring it directly
Ex. R = V/I
Instrument
Q. How do we measure quantity?
A. Using the instrument
Definition of instrument
A device for determining the value or magnitude of
a quantity or variable
Output of instrument
Numerical value of measurand or
Signal
Classification of instruments
Type-1 classification
Mechanical
Reliable for static and stable
conditions
Unable to respond rapidly in
dynamic condition
Electrical
Responds more rapidly than
mechanical methods
Depends on mechanical
meter movement
Electronics
Very fast response
Responds in dynamic
conditions
Type-2 classification
Absolute instruments
Gives the magnitude of
quantity under measurement in
terms of physical constants of
the instrument
Do not require comparison
with any other standard
instrument
Ex. Tangent galvanometer
Secondary instruments
Quantity being measured can
only be determined by the
output indicated by the
instrument
Instruments require calibration
What is Calibration?
Check the instrument against a known
standard and subsequently to find errors and
accuracy.
For Calibration, instrument is compared with
Primary standard
Secondary standard with higher accuracy than
instrument to be calibrated
An instrument with known accuracy
Definitions
Accuracy
Closeness with which an instrument reading approaches the
true value of the variable being measured.
Point accuracy: 1-point accuracy
Percentage of scale range: 500 0.2%
Percentage of true value
Precision
A measure of the reproducibility (consistency) of the
measurements.
A measure of the degree to which successive measurements
differ from one another.
Example-2
Measure known voltage of 100 V using voltmeter
Readings are 104, 103, 105, 103 and 105V
Accuracy = 100 5%
Mean = 104V and Deviation = 1V
Precision = 1%
Errors in measurement
No measurement is free from errors
If precision is adequate, accuracy doesnt
matter.
Types of errors
Gross errors (human errors)
Misreading
Incorrect adjustment
Improper application of instruments
Computational mistakes
Systematic errors
Defective or worn parts of instrument
Environmental effects
Random errors
Random variations in the parameter
Classification of errors
Limiting errors
Manufacturer specifies deviations from the
nominal value of a particular quantity.
The limits of these deviations are defined as
limiting errors.
If
As = nominal value
A = limiting error (maximum error)
Then
Actual value Aa = As A
As As
Solution
Magnitude of limiting error is
A = rAs = 0.01*150 = 1.5V
Comments
Known errors
Error of a quantity (or an instrument) is known
Similar to combinations of limiting errors
Only difference is
Sign of relative errors are given
Ex. 100 + 5
Loading effects
Ideal situation for measurement is
Original signal should remain un-distorted