Masonry Quiz
Masonry Quiz
9. What will happen if mortar is not cleaned off from the tools?
A. The mortar will build up and harden.
B. The mortar will build up but can be removed too easily.
C. The tools cannot anymore be used.
D. Just ignore it for it won’t matter anyway.
10. Which is the best way to keep the tools in good condition?
A. Keep them immediately without cleaning.
B. Clean them while they are in the tool cabinet.
C. Clean them before storage.
D. Place them in a bucket of water.
12. Which is the most appropriate storage place for these manuals?
A. Box B. Cabinet C. on top of the table D. anywhere
23. Who are covered by the Occupational Health and Safety Regulations?
A. Employers C. Self-Employed
B. Workers D. Students
24. Which is a step on risk management?
A. Identification of Safety Procedures C. Training the Workers
B. Hazard Identification D. Education
10. What happens when any of the slips lack the necessary data?
A. There is delay in processing. C. Misunderstanding occurs
B. Promptness of approval is at stake D. No approval at all
11. Which ensures correctness of deliveries or performance of services?
A. Requisition procedure C. Inspection procedure
B. Receiving procedure D. Delivery Procedure
16. If the distance of 2 posts is 4 meters, how many pieces of CHB are
needed for first layer where each CHB is 0.4m.?
A. 10 pcs. B. 11.5 pcs. C. 12.5 pcs. D. 13.5 pcs.
17. If the distance of 2 posts is 10 meters, how many pieces of CHB are
needed for first layer where each CHB is 0.80m.?
A. 10 pcs. B. 12.5 pcs. C. 15 pcs. D. 16.5 pcs.
19. If the distance of 2 posts is 18 meters, how many pieces of CHB are
needed for first layer where each CHB is 0.70m.?
A. 12.5 pcs. B. 25.5 pcs. C. 27.5 pcs. D. 28.5 pcs.
20. If the distance of 2 posts is 20 meters, how many pieces of CHB
are needed for first layer where each CHB is 0.90m.?
A. 10 pcs. B. 12.5 pcs. C. 22 pcs. D. 23.5 pcs.