-
Preservation of the High Quality Factor and Accelerating Gradient of Nb3Sn-coated Cavity During Pair Assembly
Authors:
G. Eremeev,
U. Pudasaini,
S. Cheban,
J. Fischer,
D. Forehand,
S. Posen,
A. Reilly,
R. Rimmer,
B. Tennis
Abstract:
Two CEBAF 5-cell accelerator cavities have been coated with Nb3Sn film using the vapor diffusion technique. One cavity was coated in the Jefferson Lab Nb3Sn cavity coating system, and the other in the Fermilab Nb3Sn coating system. Both cavities were measured at 4 K and 2 K in the vertical dewar test in each lab and then assembled into a cavity pair at Jefferson Lab. Previous attempts to assemble…
▽ More
Two CEBAF 5-cell accelerator cavities have been coated with Nb3Sn film using the vapor diffusion technique. One cavity was coated in the Jefferson Lab Nb3Sn cavity coating system, and the other in the Fermilab Nb3Sn coating system. Both cavities were measured at 4 K and 2 K in the vertical dewar test in each lab and then assembled into a cavity pair at Jefferson Lab. Previous attempts to assemble Nb3Sn cavities into a cavity pair degraded the superconducting properties of Nb3Sn-coated cavities. This contribution discusses the efforts to identify and mitigate the pair assembly challenges and will present the results of the vertical tests before and after pair assembly. Notably, one of the cavities reached the highest gradient above 80 mT in the vertical test after the pair assembly.
△ Less
Submitted 17 July, 2023;
originally announced July 2023.
-
Development of a prototype superconducting radio-frequency cavity for conduction-cooled accelerators
Authors:
G. Ciovati,
J. Anderson,
S. Balachandran,
G. Cheng,
B. Coriton,
E. Daly,
P. Dhakal,
A. Gurevich,
F. Hannon,
K. Harding,
L. Holland,
F. Marhauser,
K. McLaughlin,
D. Packard,
T. Powers,
U. Pudasaini,
J. Rathke,
R. Rimmer,
T. Schultheiss,
H. Vennekate,
D. Vollmer
Abstract:
The higher efficiency of superconducting radio-frequency (SRF) cavities compared to normal-conducting ones enables the development of high-energy continuous-wave linear accelerators (linacs). Recent progress in the development of high-quality Nb$_3$Sn film coatings along with the availability of cryocoolers with high cooling capacity at 4 K makes it feasible to operate SRF cavities cooled by therm…
▽ More
The higher efficiency of superconducting radio-frequency (SRF) cavities compared to normal-conducting ones enables the development of high-energy continuous-wave linear accelerators (linacs). Recent progress in the development of high-quality Nb$_3$Sn film coatings along with the availability of cryocoolers with high cooling capacity at 4 K makes it feasible to operate SRF cavities cooled by thermal conduction at relevant accelerating gradients for use in accelerators. A possible use of conduction-cooled SRF linacs is for environmental applications, requiring electron beams with energy of $1 - 10$ MeV and 1 MW of power. We have designed a 915 MHz SRF linac for such an application and developed a prototype single-cell cavity to prove the proposed design by operating it with cryocoolers at the accelerating gradient required for 1 MeV energy gain. The cavity has a $\sim 3$ $μ$m thick Nb$_3$Sn film on the inner surface, deposited on a $\sim4$ mm thick bulk Nb substrate and a bulk $\sim7$ mm thick Cu outer shell with three Cu attachment tabs. The cavity was tested up to a peak surface magnetic field of 53 mT in liquid He at 4.3 K. A horizontal test cryostat was designed and built to test the cavity cooled with three Gifford-McMahon cryocoolers. The rf tests of the conduction-cooled cavity, performed at General Atomics, achieved a peak surface magnetic field of 50 mT and stable operation was possible with up to 18.5 W of rf heat load. The peak frequency shift due to microphonics was 23 Hz. These results represent the highest peak surface magnetic field achieved in a conduction-cooled SRF cavity to date and meet the requirements for a 1 MeV energy gain.
△ Less
Submitted 22 March, 2023; v1 submitted 14 February, 2023;
originally announced February 2023.
-
Next-Generation Superconducting RF Technology based on Advanced Thin Film Technologies and Innovative Materials for Accelerator Enhanced Performance and Energy Reach
Authors:
A. - M. Valente-Feliciano,
C. Antoine,
S. Anlage,
G. Ciovati,
J. Delayen,
F. Gerigk,
A. Gurevich,
T. Junginger,
S. Keckert,
G. Keppe,
J. Knobloch,
T. Kubo,
O. Kugeler,
D. Manos,
C. Pira,
T. Proslier,
U. Pudasaini,
C. E. Reece,
R. A. Rimmer,
G. J. Rosaz,
T. Saeki,
R. Vaglio,
R. Valizadeh,
H. Vennekate,
W. Venturini Delsolaro
, et al. (3 additional authors not shown)
Abstract:
Superconducting RF is a key technology for future particle accelerators, now relying on advanced surfaces beyond bulk Nb for a leap in performance and efficiency. The SRF thin film strategy aims at transforming the current SRF technology by using highly functional materials, addressing all the necessary functions. The community is deploying efforts in three research thrusts to develop next-generat…
▽ More
Superconducting RF is a key technology for future particle accelerators, now relying on advanced surfaces beyond bulk Nb for a leap in performance and efficiency. The SRF thin film strategy aims at transforming the current SRF technology by using highly functional materials, addressing all the necessary functions. The community is deploying efforts in three research thrusts to develop next-generation thin-film based cavities. Nb on Cu cavities are developed to perform as good as or better than bulk Nb at reduced cost and with better thermal stability. Recent results showing improved accelerating field and dramatically reduced Q slope show their potential for many applications. The second research thrust is to develop cavities coated with materials that can operate at higher temperatures or sustain higher fields. Proof of principle has been established for the merit of Nb3Sn for SRF application. Research is now needed to further exploit the material and reach its full potential with novel deposition techniques. The third line of research is to push SRF performance beyond the capabilities of the superconductors alone with multilayered coatings. In parallel, developments are needed to provide quality substrates, cooling schemes and cryomodule design tailored to thin film cavities. Recent results in these three research thrusts suggest that SRF thin film technologies are at the eve of a technological revolution. For them to mature, active community support and sustained funding are needed to address fundamental developments supporting material deposition techniques, surface and RF research, technical challenges associated with scaling and industrialization. With dedicated and sustained investment, next-generation thin-film based cavities will become a reality with high performance and efficiency, facilitating energy sustainable science while enabling higher luminosity, and higher energy.
△ Less
Submitted 5 April, 2022;
originally announced April 2022.
-
An Impartial Perspective for Superconducting Nb3Sn coated Copper RF Cavities for Future Accelerators
Authors:
E. Barzi,
B. C. Barish,
R. A. Rimmer,
A. Valente-Feliciano,
C. M. Rey,
W. A. Barletta,
E. Nanni,
M. Nasr,
M. Ross,
M. Schneider,
S. Tantawi,
P. B. Welander,
E. I. Simakov,
I. O. Usov,
L. Alff,
N. Karabas,
M. Major,
J. P. Palakkal,
S. Petzold,
N. Pietralla,
N. Schäfer,
A. Kikuchi,
H. Hayano,
H. Ito,
S. Kashiwaji
, et al. (10 additional authors not shown)
Abstract:
This Snowmass21 Contributed Paper encourages the Particle Physics community in fostering R&D in Superconducting Nb3Sn coated Copper RF Cavities instead of costly bulk Niobium. It describes the pressing need to devote effort in this direction, which would deliver higher gradient and higher temperature of operation and reduce the overall capital and operational costs of any future collider. It is un…
▽ More
This Snowmass21 Contributed Paper encourages the Particle Physics community in fostering R&D in Superconducting Nb3Sn coated Copper RF Cavities instead of costly bulk Niobium. It describes the pressing need to devote effort in this direction, which would deliver higher gradient and higher temperature of operation and reduce the overall capital and operational costs of any future collider. It is unlikely that an ILC will be built in the next ten years with Nb as one of the main cost drivers of SRFs. This paper provides strong arguments on the benefits of using this time for R&D on producing Nb3Sn on inexpensive and thermally efficient metals such as Cu or bronze, while pursuing in parallel the novel U.S. concept of parallel-feed RF accelerator structures. A technology that synergistically uses both of these advanced tools would make an ILC or equivalent machines more affordable and more likely to be built. Such a successful enterprise would readily apply to other HEP accelerators, for instance a Muon Collider, and to accelerators beyond HEP. We present and assess current efforts in the U.S. on the novel concept of parallel-feed RF accelerator structures, and in the U.S. and abroad in producing Nb3Sn films on either Cu or bronze despite minimal funding.
△ Less
Submitted 26 March, 2022; v1 submitted 17 March, 2022;
originally announced March 2022.
-
Future Circular Lepton Collider FCC-ee: Overview and Status
Authors:
I. Agapov,
M. Benedikt,
A. Blondel,
M. Boscolo,
O. Brunner,
M. Chamizo Llatas,
T. Charles,
D. Denisov,
W. Fischer,
E. Gianfelice-Wendt,
J. Gutleber,
P. Janot,
M. Koratzinos,
R. Losito,
S. Nagaitsev,
K. Oide,
T. Raubenheimer,
R. Rimmer,
J. Seeman,
D. Shatilov,
V. Shiltsev,
M. Sullivan,
U. Wienands,
F. Zimmermann
Abstract:
The worldwide High Energy Physics community widely agrees that the next collider should be a Higgs factory. Acknowledging this priority, in 2021 CERN has launched the international Future Circular Collider (FCC) Feasibility Study (FS). The FCC Integrated Project foresees, in a first stage, a high-luminosity high-energy electron-positron collider, serving as Higgs, top and electroweak factory, and,…
▽ More
The worldwide High Energy Physics community widely agrees that the next collider should be a Higgs factory. Acknowledging this priority, in 2021 CERN has launched the international Future Circular Collider (FCC) Feasibility Study (FS). The FCC Integrated Project foresees, in a first stage, a high-luminosity high-energy electron-positron collider, serving as Higgs, top and electroweak factory, and, in a second stage, an energy frontier hadron collider, with a centre-of-mass energy of at least 100 TeV. In this paper, we address a few key elements of the FCC-ee accelerator design, its performance reach, and underlying technologies, as requested by the Snowmass process. The Conceptual Design Report for the FCC, published in 2019, serves as our primary reference. We also summarize a few recent changes and improvements.
△ Less
Submitted 15 March, 2022;
originally announced March 2022.
-
Higgs-Energy LEptoN (HELEN) Collider based on advanced superconducting radio frequency technology
Authors:
S. Belomestnykh,
P. C. Bhat,
A. Grassellino,
M. Checchin,
D. Denisov,
R. L. Geng,
S. Jindariani,
M. Liepe,
M. Martinello,
P. Merkel,
S. Nagaitsev,
H. Padamsee,
S. Posen,
R. A. Rimmer,
A. Romanenko,
V. Shiltsev,
A. Valishev,
V. Yakovlev
Abstract:
This Snowmass 2021 contributed paper discusses a Higgs-Energy LEptoN (HELEN) $e^+e^-$ linear collider based on advances superconducting radio frequency technology. The proposed collider offers cost and AC power savings, smaller footprint (relative to the ILC), and could be built at Fermilab with an Interaction Region within the site boundaries. After the initial physics run at 250 GeV, the collide…
▽ More
This Snowmass 2021 contributed paper discusses a Higgs-Energy LEptoN (HELEN) $e^+e^-$ linear collider based on advances superconducting radio frequency technology. The proposed collider offers cost and AC power savings, smaller footprint (relative to the ILC), and could be built at Fermilab with an Interaction Region within the site boundaries. After the initial physics run at 250 GeV, the collider could be upgraded either to higher luminosity or to higher (up to 500 GeV) energies. If the ILC could not be realized in Japan in a timely fashion, the HELEN collider would be a viable option to build a Higgs factory in the U.S.
△ Less
Submitted 15 March, 2022;
originally announced March 2022.
-
The International Linear Collider: Report to Snowmass 2021
Authors:
Alexander Aryshev,
Ties Behnke,
Mikael Berggren,
James Brau,
Nathaniel Craig,
Ayres Freitas,
Frank Gaede,
Spencer Gessner,
Stefania Gori,
Christophe Grojean,
Sven Heinemeyer,
Daniel Jeans,
Katja Kruger,
Benno List,
Jenny List,
Zhen Liu,
Shinichiro Michizono,
David W. Miller,
Ian Moult,
Hitoshi Murayama,
Tatsuya Nakada,
Emilio Nanni,
Mihoko Nojiri,
Hasan Padamsee,
Maxim Perelstein
, et al. (487 additional authors not shown)
Abstract:
The International Linear Collider (ILC) is on the table now as a new global energy-frontier accelerator laboratory taking data in the 2030s. The ILC addresses key questions for our current understanding of particle physics. It is based on a proven accelerator technology. Its experiments will challenge the Standard Model of particle physics and will provide a new window to look beyond it. This docu…
▽ More
The International Linear Collider (ILC) is on the table now as a new global energy-frontier accelerator laboratory taking data in the 2030s. The ILC addresses key questions for our current understanding of particle physics. It is based on a proven accelerator technology. Its experiments will challenge the Standard Model of particle physics and will provide a new window to look beyond it. This document brings the story of the ILC up to date, emphasizing its strong physics motivation, its readiness for construction, and the opportunity it presents to the US and the global particle physics community.
△ Less
Submitted 16 January, 2023; v1 submitted 14 March, 2022;
originally announced March 2022.
-
Medium-Grain Niobium SRF Cavity Production Technology for Science Frontiers and Accelerator Applications
Authors:
G. Myneni,
Hani E. Elsayed-Ali,
Md Obidul Islam,
Md Nizam Sayeed,
G. Ciovati,
P. Dhakal,
R. A. Rimmer,
M. Carl,
A. Fajardo,
N. Lannoy,
B. Khanal,
T. Dohmae,
A. Kumar,
T. Saeki,
K. Umemori,
M. Yamanaka,
S. Michizono,
A. Yamamoto
Abstract:
We propose cost-effective production of medium grain (MG) niobium (Nb) discs directly sliced from forged and annealed billet. This production method provides clean surface conditions and reliable mechanical characteristics with sub-millimeter average grain size resulting in stable SRF cavity production. We propose to apply this material to particle accelerator applications in the science and indus…
▽ More
We propose cost-effective production of medium grain (MG) niobium (Nb) discs directly sliced from forged and annealed billet. This production method provides clean surface conditions and reliable mechanical characteristics with sub-millimeter average grain size resulting in stable SRF cavity production. We propose to apply this material to particle accelerator applications in the science and industrial frontiers. The science applications require high field gradients (>~40 MV/m) particularly in pulse mode. The industrial applications require high Q0 values with moderate gradients (~30 MV/m) in CW mode operation. This report describes the MG Nb disc production recently demonstrated and discusses future prospects for application in advanced particle accelerators in the science and industrial frontiers.
△ Less
Submitted 11 March, 2022;
originally announced March 2022.
-
The beam exchange of a circular cooler ring with a ultrafast harmonic kicker
Authors:
Gunn Tae Park,
Jiquan Guo,
Shaoheng Wang,
Robert A. Rimmer,
Haipeng Wang
Abstract:
In this paper, we describe a harmonic kicker system used in the beam exchange scheme for the Circulator Cooling Ring (CCR) of the Jefferson Lab Electron Ion Collider(JLEIC). By delivering an ultra-fast deflecting kick, a kicker directs electron bunches selectively in/out of the CCR without degrading the beam dynamics of the CCR optimized for ion beam cooling. We will discuss the design principle o…
▽ More
In this paper, we describe a harmonic kicker system used in the beam exchange scheme for the Circulator Cooling Ring (CCR) of the Jefferson Lab Electron Ion Collider(JLEIC). By delivering an ultra-fast deflecting kick, a kicker directs electron bunches selectively in/out of the CCR without degrading the beam dynamics of the CCR optimized for ion beam cooling. We will discuss the design principle of the kicker system and demonstrate its performance with various numerical simulations. In particular, the degrading effects of realistic harmonic kicks on the beam dynamics, such as 3D kick field profiles interacting with the magnetized beam, is studied in detail with a scheme that keeps the cooling efficiency within allowable limits.
△ Less
Submitted 25 April, 2021;
originally announced April 2021.
-
Demonstration of electron cooling using a pulsed beam from an electrostatic electron cooler
Authors:
M. W. Bruker,
S. Benson,
A. Hutton,
K. Jordan,
T. Powers,
R. Rimmer,
T. Satogata,
A. Sy,
H. Wang,
S. Wang,
H. Zhang,
Y. Zhang,
F. Ma,
J. Li,
X. M. Ma,
L. J. Mao,
X. P. Sha,
M. T. Tang,
J. C. Yang,
X. D. Yang,
H. Zhao,
H. W. Zhao
Abstract:
Cooling of hadron beams is critically important in the next generation of hadron storage rings for delivery of unprecedented performance. One such application is the electron-ion collider presently under development in the US. The desire to develop electron coolers for operation at much higher energies than previously achieved necessitates the use of radio-frequency (RF) fields for acceleration as…
▽ More
Cooling of hadron beams is critically important in the next generation of hadron storage rings for delivery of unprecedented performance. One such application is the electron-ion collider presently under development in the US. The desire to develop electron coolers for operation at much higher energies than previously achieved necessitates the use of radio-frequency (RF) fields for acceleration as opposed to the conventional, electrostatic approach. While electron cooling is a mature technology at low energy utilizing a DC beam, RF acceleration requires the cooling beam to be bunched, thus extending the parameter space to an unexplored territory. It is important to experimentally demonstrate the feasibility of cooling with electron bunches and further investigate how the relative time structure of the two beams affects the cooling properties; thus, a set of four pulsed-beam cooling experiments was carried out by a collaboration of Jefferson Lab and Institute of Modern Physics (IMP).
The experiments have successfully demonstrated cooling with a beam of electron bunches in both the longitudinal and transverse directions for the first time. We have measured the effect of the electron bunch length and longitudinal ion focusing strength on the temporal evolution of the longitudinal and transverse ion beam profile and demonstrate that if the synchronization can be accurately maintained, the dynamics are not adversely affected by the change in time structure.
△ Less
Submitted 29 October, 2020;
originally announced October 2020.
-
The Large Hadron-Electron Collider at the HL-LHC
Authors:
P. Agostini,
H. Aksakal,
S. Alekhin,
P. P. Allport,
N. Andari,
K. D. J. Andre,
D. Angal-Kalinin,
S. Antusch,
L. Aperio Bella,
L. Apolinario,
R. Apsimon,
A. Apyan,
G. Arduini,
V. Ari,
A. Armbruster,
N. Armesto,
B. Auchmann,
K. Aulenbacher,
G. Azuelos,
S. Backovic,
I. Bailey,
S. Bailey,
F. Balli,
S. Behera,
O. Behnke
, et al. (312 additional authors not shown)
Abstract:
The Large Hadron electron Collider (LHeC) is designed to move the field of deep inelastic scattering (DIS) to the energy and intensity frontier of particle physics. Exploiting energy recovery technology, it collides a novel, intense electron beam with a proton or ion beam from the High Luminosity--Large Hadron Collider (HL-LHC). The accelerator and interaction region are designed for concurrent el…
▽ More
The Large Hadron electron Collider (LHeC) is designed to move the field of deep inelastic scattering (DIS) to the energy and intensity frontier of particle physics. Exploiting energy recovery technology, it collides a novel, intense electron beam with a proton or ion beam from the High Luminosity--Large Hadron Collider (HL-LHC). The accelerator and interaction region are designed for concurrent electron-proton and proton-proton operation. This report represents an update of the Conceptual Design Report (CDR) of the LHeC, published in 2012. It comprises new results on parton structure of the proton and heavier nuclei, QCD dynamics, electroweak and top-quark physics. It is shown how the LHeC will open a new chapter of nuclear particle physics in extending the accessible kinematic range in lepton-nucleus scattering by several orders of magnitude. Due to enhanced luminosity, large energy and the cleanliness of the hadronic final states, the LHeC has a strong Higgs physics programme and its own discovery potential for new physics. Building on the 2012 CDR, the report represents a detailed updated design of the energy recovery electron linac (ERL) including new lattice, magnet, superconducting radio frequency technology and further components. Challenges of energy recovery are described and the lower energy, high current, 3-turn ERL facility, PERLE at Orsay, is presented which uses the LHeC characteristics serving as a development facility for the design and operation of the LHeC. An updated detector design is presented corresponding to the acceptance, resolution and calibration goals which arise from the Higgs and parton density function physics programmes. The paper also presents novel results on the Future Circular Collider in electron-hadron mode, FCC-eh, which utilises the same ERL technology to further extend the reach of DIS to even higher centre-of-mass energies.
△ Less
Submitted 12 April, 2021; v1 submitted 28 July, 2020;
originally announced July 2020.
-
Multi-metallic conduction cooled superconducting radio-frequency cavity with high thermal stability
Authors:
G. Ciovati,
G. Cheng,
U. Pudasaini,
R. Rimmer
Abstract:
Superconducting radio-frequency cavities are commonly used in modern particle accelerators for applied and fundamental research. Such cavities are typically made of high-purity, bulk Nb and are cooled by a liquid helium bath at a temperature of ~2 K. The size, cost and complexity of operating a particle accelerator with a liquid helium refrigerator makes the current cavity technology not favorable…
▽ More
Superconducting radio-frequency cavities are commonly used in modern particle accelerators for applied and fundamental research. Such cavities are typically made of high-purity, bulk Nb and are cooled by a liquid helium bath at a temperature of ~2 K. The size, cost and complexity of operating a particle accelerator with a liquid helium refrigerator makes the current cavity technology not favorable for use in industrial-type accelerators. We developed a multi-metallic 1.495~GHz elliptical cavity conductively cooled by a cryocooler. The cavity has a ~2 $μ$m thick layer of Nb$_3$Sn on the inner surface, exposed to the rf field, deposited on a ~3 mm thick bulk Nb shell and a bulk Cu shell, of thickness $\geqslant 5$ mm deposited on the outer surface by electroplating. A bolt-on Cu plate 1.27 cm thick was used to thermally connect the cavity equator to the second stage of a Gifford-McMahon cryocooler with a nominal capacity of 2 W at 4.2 K. The cavity was tested initially in liquid helium at 4.3 K and reached a peak surface magnetic field of ~36 mT with a quality factor of $2\times 10^9$. The cavity cooled by the crycooler achieved a peak surface magnetic field of ~29 mT, equivalent to an accelerating gradient of 6.5 MV/m, and it was able to operate in continuous-wave with as high as 5 W dissipation in the cavity for 1 h without any thermal breakdown. This result represents a paradigm shift in the technology of superconducting accelerator cavities.
△ Less
Submitted 31 January, 2020; v1 submitted 29 January, 2020;
originally announced January 2020.
-
Design of a cw, low energy, high power superconducting linac for environmental applications
Authors:
G. Ciovati,
J. Anderson,
B. Coriton,
J. Guo,
F. Hannon,
L. Holland,
M. LeSher,
F. Marhauser,
J. Rathke,
R. Rimmer,
T. Schultheiss,
V. Vylet
Abstract:
The treatment of flue gases from power plants and municipal or industrial wastewater using electron beam irradiation technology has been successfully demonstrated in small-scale pilot plants. The beam energy requirement is rather modest, on the order of a few MeV, however the adoption of the technology at an industrial scale requires the availability of high beam power, of the order of 1 MW, in a…
▽ More
The treatment of flue gases from power plants and municipal or industrial wastewater using electron beam irradiation technology has been successfully demonstrated in small-scale pilot plants. The beam energy requirement is rather modest, on the order of a few MeV, however the adoption of the technology at an industrial scale requires the availability of high beam power, of the order of 1 MW, in a cost effective way. In this article we present the design of a compact superconducting accelerator capable of delivering a cw electron beam with a current of 1 A and an energy of 1 MeV. The main components are an rf-gridded thermionic gun and a conduction cooled beta= 0.5 elliptical Nb3Sn cavity with dual coaxial power couplers. An engineering and cost analysis shows that the proposed design would result in a processing cost competitive with alternative treatment methods.
△ Less
Submitted 11 June, 2018; v1 submitted 22 February, 2018;
originally announced February 2018.
-
PERLE: Powerful Energy Recovery Linac for Experiments - Conceptual Design Report
Authors:
D. Angal-Kalinin,
G. Arduini,
B. Auchmann,
J. Bernauer,
A. Bogacz,
F. Bordry,
S. Bousson,
C. Bracco,
O. Brüning,
R. Calaga,
K. Cassou,
V. Chetvertkova,
E. Cormier,
E. Daly,
D. Douglas,
K. Dupraz,
B. Goddard,
J. Henry,
A. Hutton,
E. Jensen,
W. Kaabi,
M. Klein,
P. Kostka,
F. Marhauser,
A. Martens
, et al. (17 additional authors not shown)
Abstract:
A conceptual design is presented of a novel ERL facility for the development and application of the energy recovery technique to linear electron accelerators in the multi-turn, large current and large energy regime. The main characteristics of the powerful energy recovery linac experiment facility (PERLE) are derived from the design of the Large Hadron electron Collider, an electron beam upgrade u…
▽ More
A conceptual design is presented of a novel ERL facility for the development and application of the energy recovery technique to linear electron accelerators in the multi-turn, large current and large energy regime. The main characteristics of the powerful energy recovery linac experiment facility (PERLE) are derived from the design of the Large Hadron electron Collider, an electron beam upgrade under study for the LHC, for which it would be the key demonstrator. PERLE is thus projected as a facility to investigate efficient, high current (> 10 mA) ERL operation with three re-circulation passages through newly designed SCRF cavities, at 801.58 MHz frequency, and following deceleration over another three re-circulations. In its fully equipped configuration, PERLE provides an electron beam of approximately 1 GeV energy. A physics programme possibly associated with PERLE is sketched, consisting of high precision elastic electron-proton scattering experiments, as well as photo-nuclear reactions of unprecedented intensities with up to 30 MeV photon beam energy as may be obtained using Fabry-Perot cavities. The facility has further applications as a general technology test bed that can investigate and validate novel superconducting magnets (beam induced quench tests) and superconducting RF structures (structure tests with high current beams, beam loading and transients). Besides a chapter on operation aspects, the report contains detailed considerations on the choices for the SCRF structure, optics and lattice design, solutions for arc magnets, source and injector and on further essential components. A suitable configuration derived from the here presented design concept may next be moved forward to a technical design and possibly be built by an international collaboration which is being established.
△ Less
Submitted 24 May, 2017;
originally announced May 2017.
-
Study of Beam Synchronization at JLEIC
Authors:
V. S. Morozov,
Ya. S. Derbenev,
J. Guo,
A. Hutton,
F. Lin,
T. Michalski,
P. Nadel-Turonski,
F. Pilat,
R. Rimmer,
T. Satogata,
H. Wang,
Y. Zhang,
B. Terzic,
U. Wienands
Abstract:
The ion collider ring of Jefferson Lab Electron-Ion Collider (JLEIC) accommodates a wide range of ion energies, from 20 to 100 GeV for protons or from 8 to 40 GeV per nucleon for lead ions. In this medium energy range, ions are not fully relativistic, which means values of their relativistic beta are slightly below 1, leading to an energy dependence of revolution time of the collider ring. On the…
▽ More
The ion collider ring of Jefferson Lab Electron-Ion Collider (JLEIC) accommodates a wide range of ion energies, from 20 to 100 GeV for protons or from 8 to 40 GeV per nucleon for lead ions. In this medium energy range, ions are not fully relativistic, which means values of their relativistic beta are slightly below 1, leading to an energy dependence of revolution time of the collider ring. On the other hand, electrons with energy 3 GeV and above are already ultra-relativistic such that their speeds are effectively equal to the speed of light. The difference in speeds of colliding electrons and ions in JLEIC, when translated into a path-length difference necessary to maintain the same timing between electron and ion bunches, is quite large. In this paper, we explore schemes for synchronizing the electron and ion bunches at a collision point as the ion energy is varied.
△ Less
Submitted 29 June, 2016;
originally announced June 2016.
-
MEIC Design Summary
Authors:
S. Abeyratne,
D. Barber,
A. Bogacz,
P. Brindza,
Y. Cai,
A. Camsonne,
A. Castilla,
P. Chevtsov,
E. Daly,
Y. S. Derbenev,
D. Douglas,
V. Dudnikov,
R. Ent,
B. Erdelyi,
Y. Filatov,
D. Gaskell,
J. Grames,
J. Guo,
L. Harwood,
A. Hutton,
C. Hyde,
K. Jordan,
A. Kimber,
G. A. Krafft,
A. Kondratenko
, et al. (30 additional authors not shown)
Abstract:
This document summarizes the design of Jefferson Lab's electron-ion collider, MEIC, as of January 20, 2015, and describes the facility whose cost was estimated for the United States Department of Energy Nuclear Sciences Advisory Committee EIC cost review of January 26-28, 2015. In particular, each of the main technical systems within the collider is presented to the level of the best current infor…
▽ More
This document summarizes the design of Jefferson Lab's electron-ion collider, MEIC, as of January 20, 2015, and describes the facility whose cost was estimated for the United States Department of Energy Nuclear Sciences Advisory Committee EIC cost review of January 26-28, 2015. In particular, each of the main technical systems within the collider is presented to the level of the best current information.
△ Less
Submitted 29 April, 2015;
originally announced April 2015.
-
Science Requirements and Conceptual Design for a Polarized Medium Energy Electron-Ion Collider at Jefferson Lab
Authors:
S. Abeyratne,
A. Accardi,
S. Ahmed,
D. Barber,
J. Bisognano,
A. Bogacz,
A. Castilla,
P. Chevtsov,
S. Corneliussen,
W. Deconinck,
P. Degtiarenko,
J. Delayen,
Ya. Derbenev,
S. DeSilva,
D. Douglas,
V. Dudnikov,
R. Ent,
B. Erdelyi,
P. Evtushenko,
Yu. Filatov,
D. Gaskell,
R. Geng,
V. Guzey,
T. Horn,
A. Hutton
, et al. (33 additional authors not shown)
Abstract:
This report presents a brief summary of the science opportunities and program of a polarized medium energy electron-ion collider at Jefferson Lab and a comprehensive description of the conceptual design of such a collider based on the CEBAF electron accelerator facility.
This report presents a brief summary of the science opportunities and program of a polarized medium energy electron-ion collider at Jefferson Lab and a comprehensive description of the conceptual design of such a collider based on the CEBAF electron accelerator facility.
△ Less
Submitted 5 September, 2012; v1 submitted 4 September, 2012;
originally announced September 2012.
-
MICE: the Muon Ionization Cooling Experiment. Step I: First Measurement of Emittance with Particle Physics Detectors
Authors:
U. Bravar,
M. Bogomilov,
Y. Karadzhov,
D. Kolev,
I. Russinov,
R. Tsenov,
L. Wang,
F. Y. Xu,
S. X. Zheng,
R. Bertoni,
M. Bonesini,
R. Mazza,
V. Palladino,
G. Cecchet,
A. de Bari,
M. Capponi,
A. Iaciofano,
D. Orestano,
F. Pastore,
L. Tortora,
S. Ishimoto,
S. Suzuki,
K. Yoshimura,
Y. Mori,
Y. Kuno
, et al. (123 additional authors not shown)
Abstract:
The Muon Ionization Cooling Experiment (MICE) is a strategic R&D project intended to demonstrate the only practical solution to providing high brilliance beams necessary for a neutrino factory or muon collider. MICE is under development at the Rutherford Appleton Laboratory (RAL) in the United Kingdom. It comprises a dedicated beamline to generate a range of input muon emittances and momenta, with…
▽ More
The Muon Ionization Cooling Experiment (MICE) is a strategic R&D project intended to demonstrate the only practical solution to providing high brilliance beams necessary for a neutrino factory or muon collider. MICE is under development at the Rutherford Appleton Laboratory (RAL) in the United Kingdom. It comprises a dedicated beamline to generate a range of input muon emittances and momenta, with time-of-flight and Cherenkov detectors to ensure a pure muon beam. The emittance of the incoming beam will be measured in the upstream magnetic spectrometer with a scintillating fiber tracker. A cooling cell will then follow, alternating energy loss in Liquid Hydrogen (LH2) absorbers to RF cavity acceleration. A second spectrometer, identical to the first, and a second muon identification system will measure the outgoing emittance. In the 2010 run at RAL the muon beamline and most detectors were fully commissioned and a first measurement of the emittance of the muon beam with particle physics (time-of-flight) detectors was performed. The analysis of these data was recently completed and is discussed in this paper. Future steps for MICE, where beam emittance and emittance reduction (cooling) are to be measured with greater accuracy, are also presented.
△ Less
Submitted 30 July, 2013; v1 submitted 9 October, 2011;
originally announced October 2011.
-
Gluons and the quark sea at high energies: distributions, polarization, tomography
Authors:
D. Boer,
M. Diehl,
R. Milner,
R. Venugopalan,
W. Vogelsang,
A. Accardi,
E. Aschenauer,
M. Burkardt,
R. Ent,
V. Guzey,
D. Hasch,
K. Kumar,
M. A. C. Lamont,
Y. Li,
W. J. Marciano,
C. Marquet,
F. Sabatie,
M. Stratmann,
F. Yuan,
S. Abeyratne,
S. Ahmed,
C. Aidala,
S. Alekhin,
M. Anselmino,
H. Avakian
, et al. (164 additional authors not shown)
Abstract:
This report is based on a ten-week program on "Gluons and the quark sea at high-energies", which took place at the Institute for Nuclear Theory in Seattle in Fall 2010. The principal aim of the program was to develop and sharpen the science case for an Electron-Ion Collider (EIC), a facility that will be able to collide electrons and positrons with polarized protons and with light to heavy nuclei…
▽ More
This report is based on a ten-week program on "Gluons and the quark sea at high-energies", which took place at the Institute for Nuclear Theory in Seattle in Fall 2010. The principal aim of the program was to develop and sharpen the science case for an Electron-Ion Collider (EIC), a facility that will be able to collide electrons and positrons with polarized protons and with light to heavy nuclei at high energies, offering unprecedented possibilities for in-depth studies of quantum chromodynamics. This report is organized around four major themes: i) the spin and flavor structure of the proton, ii) three-dimensional structure of nucleons and nuclei in momentum and configuration space, iii) QCD matter in nuclei, and iv) Electroweak physics and the search for physics beyond the Standard Model. Beginning with an executive summary, the report contains tables of key measurements, chapter overviews for each of the major scientific themes, and detailed individual contributions on various aspects of the scientific opportunities presented by an EIC.
△ Less
Submitted 28 November, 2011; v1 submitted 5 August, 2011;
originally announced August 2011.
-
Buffered Electropolishing -- a New Way for Achieving Extremely Smooth Surface Finish on Nb SRF Cavities To be Used in Particle Accelerators
Authors:
A. T. Wu,
R. A. Rimmer,
X. Y. Lu,
F. Eozenou,
L. Lin,
G. Ciovati,
J. Mammosser,
S. Jin,
E. D. Wang,
H. Tian,
J. Williams,
R. Manus,
C. Reece,
H. Phillips,
W. Sommer
Abstract:
A new surface treatment technique for niobium (Nb) Superconducting Radio Frequency (SRF) cavities called Buffered Electropolishing (BEP) has been developed at JLab. It was found that BEP could produce the smoothest surface finish on Nb samples ever reported in the literature. Experimental results revealed that the Nb removal rate of BEP could reach as high as 4.09 um/min. This is significantly f…
▽ More
A new surface treatment technique for niobium (Nb) Superconducting Radio Frequency (SRF) cavities called Buffered Electropolishing (BEP) has been developed at JLab. It was found that BEP could produce the smoothest surface finish on Nb samples ever reported in the literature. Experimental results revealed that the Nb removal rate of BEP could reach as high as 4.09 um/min. This is significantly faster1 than that of the conventional electropolishing technique employing an acid mixture of HF and H2SO4. An investigation is underway to determine the optimum values for all relevant BEP parameters so that the high quality of surface finish achieved on samples can be realized within the geometry of an elliptical RF cavity. Toward this end, single cell Nb cavities are being electropolished with BEP electrolyte at both CEA-Saclay and JLAB. These cavities will be RF tested and the results will be reported through this presentation.
△ Less
Submitted 12 May, 2009;
originally announced May 2009.
