Showing 1–7 of 7 results for author: Schioppa, E J

MALTA-Cz: A radiation hard full-size monolithic CMOS sensor with small electrodes on high-resistivity Czochralski substrate

Authors: H. Pernegger, P. Allport, D. V. Berlea, A. Birman, D. Bortoletto, C. Buttar, E. Charbon, F. Dachs, V. Dao, H. Denizli, D. Dobrijevic, M. Dyndal, A. Fenigstein, L. Flores Sanz de Acedo, P. Freeman, A. Gabrielli, M. Gazi, L. Gonella, V. Gonzalez, G. Gustavino, A. Haim, T. Kugathasan, M. LeBlanc, M. Munker, K. Y. Oyulmaz , et al. (14 additional authors not shown)

Abstract: Depleted Monolithic Active Pixel Sensor (DMAPS) sensors developed in the Tower Semiconductor 180 nm CMOS imaging process have been designed in the context of the ATLAS ITk upgrade Phase-II at the HL-LHC and for future collider experiments. The "MALTA-Czochralski (MALTA-Cz)" full size DMAPS sensor has been developed with the goal to demonstrate a radiation hard, thin CMOS sensor with high granulari… ▽ More Depleted Monolithic Active Pixel Sensor (DMAPS) sensors developed in the Tower Semiconductor 180 nm CMOS imaging process have been designed in the context of the ATLAS ITk upgrade Phase-II at the HL-LHC and for future collider experiments. The "MALTA-Czochralski (MALTA-Cz)" full size DMAPS sensor has been developed with the goal to demonstrate a radiation hard, thin CMOS sensor with high granularity, high hit-rate capability, fast response time and superior radiation tolerance. The small pixel size ($36.4\times 36.4$~$μ$m$^2$) provides high spatial resolution. Its asynchronous readout architecture is designed for high hit-rates and fast time response in triggered and trigger-less detector applications. The readout architecture is designed to stream all hit data to the multi-channel output which allows an off-sensor trigger formation and the use of hit-time information for event tagging. The sensor manufacturing has been optimised through process adaptation and special implant designs to allow the manufacturing of small electrode DMAPS on thick high-resistivity p-type Czochralski substrate. The special processing ensures excellent charge collection and charge particle detection efficiency even after a high level of radiation. Furthermore the special implant design and use of a Czochralski substrate improves the sensor's time resolution. This paper presents a summary of sensor design optimisation through process and implant choices and TCAD simulation to model the signal response. Beam and laboratory test results on unirradiated and irradiated sensors have shown excellent detection efficiency after a dose of $2\times10^{15}$ 1 MeV n$_{eq}$/cm$^{2}$. The time resolution of the sensor is measured to be $σ=2$~ns. △ Less

Submitted 13 September, 2023; v1 submitted 10 January, 2023; originally announced January 2023.

Journal ref: JINST 18 P09018 (2023)

Mini-MALTA: Radiation hard pixel designs for small-electrode monolithic CMOS sensors for the High Luminosity LHC

Authors: M. Dyndal, V. Dao, P. Allport, I. Asensi Tortajada, M. Barbero, S. Bhat, D. Bortoletto, I. Berdalovic, C. Bespin, C. Buttar, I. Caicedo, R. Cardella, F. Dachs, Y. Degerli, H. Denizli, L. Flores Sanz de Acedo, P. Freeman, L. Gonella, A. Habib, T. Hemperek, T. Hirono, B. Hiti, T. Kugathasan, I. Mandić, D. Maneuski , et al. (19 additional authors not shown)

Abstract: Depleted Monolithic Active Pixel Sensor (DMAPS) prototypes developed in the TowerJazz 180 nm CMOS imaging process have been designed in the context of the ATLAS upgrade Phase-II at the HL-LHC. The pixel sensors are characterized by a small collection electrode (3 $μ$m) to minimize capacitance, a small pixel size ($36.4\times 36.4$ $μ$m), and are produced on high resistivity epitaxial p-type silico… ▽ More Depleted Monolithic Active Pixel Sensor (DMAPS) prototypes developed in the TowerJazz 180 nm CMOS imaging process have been designed in the context of the ATLAS upgrade Phase-II at the HL-LHC. The pixel sensors are characterized by a small collection electrode (3 $μ$m) to minimize capacitance, a small pixel size ($36.4\times 36.4$ $μ$m), and are produced on high resistivity epitaxial p-type silicon. The design targets a radiation hardness of $1\times10^{15}$ 1 MeV n$_{eq}$/cm$^{2}$, compatible with the outermost layer of the ATLAS ITK Pixel detector. This paper presents the results from characterization in particle beam tests of the Mini-MALTA prototype that implements a mask change or an additional implant to address the inefficiencies on the pixel edges. Results show full efficiency after a dose of $1\times10^{15}$ 1 MeV n$_{eq}$/cm$^{2}$. △ Less

Submitted 14 December, 2019; v1 submitted 26 September, 2019; originally announced September 2019.

Measurement of the relative response of TowerJazz Mini-MALTA CMOS prototypes at Diamond Light Source

Authors: Maria Mironova, Kaloyan Metodiev, Phil Allport, Ivan Berdalovic, Daniela Bortoletto, Craig Buttar, Roberto Cardella, Valerio Dao, Mateusz Dyndal, Patrick Freeman, Leyre Flores Sanz de Acedo, Laura Gonella, Thanushan Kugathasan, Heinz Pernegger, Francesco Piro, Richard Plackett, Petra Riedler, Abhishek Sharma, Enrico Junior Schioppa, Ian Shipsey, Carlos Solans Sanchez, Walter Snoeys, Hakan Wennloef, Daniel Weatherill, Daniel Wood , et al. (1 additional authors not shown)

Abstract: This paper outlines the results of investigations into the effects of radiation damage in the mini-MALTA prototype. Measurements were carried out at Diamond Light Source using a micro-focus X-ray beam, which scanned across the surface of the device in 2 $\mathrm{μm}$ steps. This allowed the in-pixel photon response to be measured directly with high statistics. Three pixel design variations were co… ▽ More This paper outlines the results of investigations into the effects of radiation damage in the mini-MALTA prototype. Measurements were carried out at Diamond Light Source using a micro-focus X-ray beam, which scanned across the surface of the device in 2 $\mathrm{μm}$ steps. This allowed the in-pixel photon response to be measured directly with high statistics. Three pixel design variations were considered: one with the standard continuous $\mathrm{n^-}$ layer layout and front-end, and extra deep p-well and $\mathrm{n^-}$ gap designs with a modified front-end. Five chips were measured: one unirradiated, one neutron irradiated, and three proton irradiated. △ Less

Submitted 2 October, 2019; v1 submitted 18 September, 2019; originally announced September 2019.

Identification of particles with Lorentz factor up to $10^{4}$ with Transition Radiation Detectors based on micro-strip silicon detectors

Authors: J. Alozy, N. Belyaev, M. Campbell, M. Cherry, F. Dachs, S. Doronin, K. Filippov, P. Fusco, F. Gargano, E. Heijne, S. Konovalov, D. Krasnopevtsev, X. Llopart, F. Loparco, V. Mascagna, M. N. Mazziotta, H. Pernegger, D. Ponomarenko, M. Prest, D. Pyatiizbyantseva, R. Radomskii, C. Rembser, A. Romaniouk, A. A. Savchenko, D. Schaefer , et al. (17 additional authors not shown)

Abstract: This work is dedicated to the study of a technique for hadron identification in the TeV momentum range, based on the simultaneous measurement of the energies and of the emission angles of the Transition Radiation (TR) X-rays with respect to the radiating particles. A detector setup has been built and tested with particles in a wide range of Lorentz factors (from about $10^3$ to about… ▽ More This work is dedicated to the study of a technique for hadron identification in the TeV momentum range, based on the simultaneous measurement of the energies and of the emission angles of the Transition Radiation (TR) X-rays with respect to the radiating particles. A detector setup has been built and tested with particles in a wide range of Lorentz factors (from about $10^3$ to about $4 \times 10^4$ crossing different types of radiators. The measured double-differential (in energy and angle) spectra of the TR photons are in a reasonably good agreement with TR simulation predictions. △ Less

Submitted 22 February, 2019; v1 submitted 31 January, 2019; originally announced January 2019.

Comments: 31 pages, 12 figures, paper published on Nuclear Instruments & Methods A

Journal ref: Nuclear Instruments & Methods A, volume 927 (2019), pages 1-13

CMOS Monolithic Pixel Sensors based on the Column-Drain Architecture for the HL-LHC Upgrade

Authors: K. Moustakas, M. Barbero, I. Berdalovic, C. Bespin, P. Breugnon, I. Caicedo, R. Cardella, Y. Degerli, N. Egidos Plaja, S. Godiot, F. Guilloux, T. Hemperek, T. Hirono, H. Krueger, T. Kugathasan, C. A. Marin Tobon, P. Pangaud, H. Pernegger, E. J. Schioppa, W. Snoeys, M. Vandenbroucke, T. Wang, N. Wermes

Abstract: Depleted Monolithic Active Pixel Sensors (DMAPS) constitute a promising low cost alternative for the outer layers of the ATLAS experiment Inner Tracker (ITk). Realizations in modern, high resistivity CMOS technologies enhance their radiation tolerance by achieving substantial depletion of the sensing volume. Two DMAPS prototypes that use the same "column-drain" readout architecture and are based o… ▽ More Depleted Monolithic Active Pixel Sensors (DMAPS) constitute a promising low cost alternative for the outer layers of the ATLAS experiment Inner Tracker (ITk). Realizations in modern, high resistivity CMOS technologies enhance their radiation tolerance by achieving substantial depletion of the sensing volume. Two DMAPS prototypes that use the same "column-drain" readout architecture and are based on different sensor implementation concepts named LF-Monopix and TJ-Monopix have been developed for the High Luminosity upgrade of the Large Hardon Collider (HL-LHC). LF-Monopix was fabricated in the LFoundry 150 nm technology and features pixel size of $50x250~μm^{2}$ and large collection electrode opted for high radiation tolerance. Detection efficiency up to 99\% has been measured after irradiation to $1\cdot10^{15}~n_{eq}/cm^{2}$. TJ-Monopix is a large scale $(1x2~cm^{2})$ prototype featuring pixels of $36x40~μm^{2}$ size. It was fabricated in a novel TowerJazz 180 nm modified process that enables full depletion of the sensitive layer, while employing a small collection electrode that is less sensitive to crosstalk. The resulting small sensor capacitance ($<=3~fF$) is exploited by a compact, low power front end optimized to meet the 25ns timing requirement. Measurement results demonstrate the sensor performance in terms of Equivalent Noise Charge (ENC) $\approx11e^{-}$, threshold $\approx300~e^-$, threshold dispersion $\approx30~e^-$ and total power consumption lower than $120~mW/cm^2$. △ Less

Submitted 10 September, 2018; originally announced September 2018.

Exact solutions for silicon photomultipliers models and application to measurements

Authors: Enrico Junior Schioppa

Abstract: Dark count rate and correlated noise rate are among the main parameters that characterize silicon photomultipliers (SiPM). Typically, these parameters are evaluated by applying approximate formulas, or by fitting specific models, to the measured SiPM noise spectra. Here a novel approach is presented, where exact formulas are derived from a statistical model of dark counts and correlated noise gene… ▽ More Dark count rate and correlated noise rate are among the main parameters that characterize silicon photomultipliers (SiPM). Typically, these parameters are evaluated by applying approximate formulas, or by fitting specific models, to the measured SiPM noise spectra. Here a novel approach is presented, where exact formulas are derived from a statistical model of dark counts and correlated noise generation. The method allows one to measure the true value of such parameters from the areas of just the first peaks in the dark spectrum. A numerical analysis shows the accuracy of the method. △ Less

Submitted 31 October, 2017; originally announced October 2017.

Comments: 11 pages, 5 figures

An innovative silicon photomultiplier digitizing camera for gamma-ray astronomy

Authors: Matthieu Heller, Enrico Junior Schioppa, Alessio Porcelli, Isaac Troyano Pujadas, Krzysztof Zietara, Domenico Della Volpe, Teresa Montaruli, Franck Cadoux, Yannick Favre, Juan Antonio Aguilar Sanchez, Asen Christov, Elisa Prandini, Pawel Rajda, Mohamed Rameez, Woijciech Blinik, Jacek Blocki, Leszek Bogacz, Jurek Borkowski, Tomasz Bulik, Adam Frankowski, Mira Grudzinska, Bartosz Idzkowski, Mateusz Jamrozy, Mateusz Janiak, Jerzy Kasperek , et al. (22 additional authors not shown)

Abstract: The single-mirror small-size telescope (SST-1M) is one of the three proposed designs for the small-size telescopes (SSTs) of the Cherenkov Telescope Array (CTA) project. The SST-1M will be equipped with a 4 m-diameter segmented mirror dish and an innovative fully digital camera based on silicon photo-multipliers (SiPMs). Since the SST sub-array will consist of up to 70 telescopes, the challenge is… ▽ More The single-mirror small-size telescope (SST-1M) is one of the three proposed designs for the small-size telescopes (SSTs) of the Cherenkov Telescope Array (CTA) project. The SST-1M will be equipped with a 4 m-diameter segmented mirror dish and an innovative fully digital camera based on silicon photo-multipliers (SiPMs). Since the SST sub-array will consist of up to 70 telescopes, the challenge is not only to build a telescope with excellent performance, but also to design it so that its components can be commissioned, assembled and tested by industry. In this paper we review the basic steps that led to the design concepts for the SST-1M camera and the ongoing realization of the first prototype, with focus on the innovative solutions adopted for the photodetector plane and the readout and trigger parts of the camera. In addition, we report on results of laboratory measurements on real scale elements that validate the camera design and show that it is capable of matching the CTA requirements of operating up to high-moon-light background conditions. △ Less

Submitted 12 July, 2016; originally announced July 2016.

Comments: 30 pages, 61 figures