Digital Power Meter Catalogue (060816)
Digital Power Meter Catalogue (060816)
Digital Power Meter Catalogue (060816)
kr
DPM-B100 / DPM-B150
Overview
DPM-B Series offers high-accuracy power and energy measurements. DPM-B Series is going to control and monitor circuit breaker efficiently as well as integrates analog and digital measurement point in conformity superior circuit drawing, elegant design and high trust. The DPM-B Series is simple to use, and offers a big, bright LCD display for superior readability in adverse lighting conditions. Complete with RMS of 3-phase voltages and currents, power, energy, power factor, and frequency measurements, the DPM-B Series is available in a variety of flexible configurations including IEC standard. It offers outstanding quality, versatility, and functionality in a low-cost, ultra-compact meter.
Voltage value Current value Active/Reactive Power, Energy value Mode Button
Digital Input/ Output Terminal Communication Terminal(RS485) Control Source & GND Terminal
Set Button
DPM-B150
Load Factor Display Mode: Voltage Frequency Voltage value Mode: Current Frequency Mode:Energy Current value Active/Reactive Power, Energy value Mode & Setting Button CB Control Button Voltage Input Terminal
DI Status LED
Communication Terminal(RS485)
Features Summary
Ease of Use - Fast setup via display - Bright, easy to read LCD display Measurements - 3-phase voltages/currents RMS, Active/Reactive power, Active/Reactive Energy - Frequency, power factor Communication - RS-485 port - Modbus RTU for integration
Standards - High accuracy, supports IEC 60687, IEC61036, IEC61268, IEC62053-21, IEC62053-22 and IEC62053-2 Pulse Outputs kWh, kVARh Communications - RS-485 port with standard Modbus RTU - Baud rated to 19,200bps
Power Supplies
- 85 to 264VAC/VDC - 45 to 65Hz
Basic functions
Front Panel Display Large, bright LCD display - Displays all basic power parameters - Display load Factor - The front-face display panel of DPM-B150 is composed of a LCD, 8 LEDs, 8 keypads buttons to display various digital input/output. Pulse outputs - 2 outputs for kWh, kVARh B100
Voltage L-N Voltage L-L Frequency Current Active Power Reactive Power Active Energy Reactive Energy Power Factor Digital Input Digital Output Per phase Per phase Per phase 3-phase total 3-phase total 3-phase total 3-phase total 3-phase total General Purpose CB Status Pulse Control
Specifications
Accuracy - Voltage: L-N 0.2%, L-L 0.2% - Frequency: 0.1Hz - Current: 0.2% - Power Factor: 0.5% - Power and energy measurements: (kW, kVAR, kWh, kVARh) 0.5% Environmental Conditions - Operating temp: -20 to 70 - Storage: -38 to 80 - Humidity: 5% to 95% Input characteristics and connection - Measurement Bandwidth: Voltage: 260Hz, Current : 14kHz - Support Direct 4-wire, 4-wire (3PT, 3CT), 4-wire (2PT, 3CT), Direct 3-wire, 3-wire (2PT, 2CT), Direct 3wire single phase, Direct 2-wire single phase - Impedance: 10M Ohm/phase - Burden: PT < 0.5VA, CT < 0.1VA (Voltage : < 460V, Current : < 10A) Dimensions and Shipping - Basic unit installed depth: B100: 110x106x110(mm) - Shipping weight: B100: 0.54kg B150: 110x104x160(mm)
B150
1 1
4 2 2 2
Standards - High accuracy, supports IEC 60687, IEC61036, IEC61268, IEC62053-21, IEC62053-22 and IEC62053-2
B150: 0.73kg