Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 549 views

    Indiabulls Power Limited: Sop/Opns/ Operations Department

    Uploaded by

    arvidkumar87060
    This standard operating procedure outlines the steps for starting up and isolating the condensate extraction pump (CEP) at Indiabulls Power Limited. The 21 steps for starting up the CEP include opening valves, checking oil levels, and starting the pump from the distributed control system. The 13 steps for isolating the CEP include securing clearance, breaking isolation, closing valves, venting lines, and opening valves in a specific sequence for normalization after cleaning the suction strainer.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOC, PDF, TXT or read online from Scribd

    Indiabulls Power Limited: Sop/Opns/ Operations Department

    Uploaded by

    arvidkumar87060
    549 views2 pages
    This standard operating procedure outlines the steps for starting up and isolating the condensate extraction pump (CEP) at Indiabulls Power Limited. The 21 steps for starting up the CEP include opening valves, checking oil levels, and starting the pump from the distributed control system. The 13 steps for isolating the CEP include securing clearance, breaking isolation, closing valves, venting lines, and opening valves in a specific sequence for normalization after cleaning the suction strainer.

    Original Description:

    standard operating pressure ..

    Original Title

    SOP_ CEP

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This standard operating procedure outlines the steps for starting up and isolating the condensate extraction pump (CEP) at Indiabulls Power Limited. The 21 steps for starting up the CEP include opening valves, checking oil levels, and starting the pump from the distributed control system. The 13 steps for isolating the CEP include securing clearance, breaking isolation, closing valves, venting lines, and opening valves in a specific sequence for normalization after cleaning the suction strainer.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    549 views2 pages

    Indiabulls Power Limited: Sop/Opns/ Operations Department

    Uploaded by

    arvidkumar87060
    This standard operating procedure outlines the steps for starting up and isolating the condensate extraction pump (CEP) at Indiabulls Power Limited. The 21 steps for starting up the CEP include opening valves, checking oil levels, and starting the pump from the distributed control system. The 13 steps for isolating the CEP include securing clearance, breaking isolation, closing valves, venting lines, and opening valves in a specific sequence for normalization after cleaning the suction strainer.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    of 2

    Standard Operating Procedure

    Indiabulls Power Limited


    Title:Standard Operating Procedure
    for Line Up & Isolation of CEP Document No Issue No / Date Rev. No / Date 00/

    SOP/OPNS/

    Operations Department

    Purpose : This procedure is used as work instruction for Turbine Operator, Desk and Field Engineer and Shift Incharge Scope : This procedure explains Startup of CEP and its isolation Responsibility: TG operator, Desk/Field Engineer, Shift In charge. Procedure: Before Starting: 1) 2) 3) 4) 5) Check the permits issued for the above equipment are returned. Suction valve should be open. Open suction relief valve. Oil level in Thrust bearing should be normal Open the inlet & outlet valves of DMCW line to thrust bearing and ensure that DMCW pump is running. 6) Open the valves for staffing box sealing (both CEP discharge & overhead CST) 7) Open the bypass of discharge valve. 8) Open the GSC inlet & outlet valves (CD-7 & CD-8) 9) Open the isolation valves of CD-25 (Minimum recirculation line). 10) Open the isolation valves of CD-21 (Excess Return line to overhead CST). 11) Open the isolation valves of DM-20 (Emergency make up to Condenser). 12) Open the isolation valves of DM-15 (Normal make up to Condenser). 13) Open the isolation valves of CD-14 & CD-19 (Deaerator level control). 14) Open the CEP recirculation valve from DCS. 15) Open the isolation valves of vent line (CEP discharge & Canister vent) 16) Charge all the local pressure gauges/transmitters/switches 17) Local Push Bottom should be released 18) Hot well level gauges should be visible. 19) CEP breaker should be in service & remote. 20) All other permissive should be available at DCS. 21) All CEP protection & interlock should be through. 22) Start the CEP from DCS.

    Isolation of CEP: Page 1 of 2 Desk Engineer Prepared By Head - Operation Reviewed & Approved By

    Standard Operating Procedure

    Indiabulls Power Limited


    Title:Standard Operating Procedure
    for Line Up & Isolation of CEP Document No Issue No / Date Rev. No / Date 00/

    SOP/OPNS/

    Operations Department

    1) Proper precautions to be taken during CEP isolation / CEP strainer cleaning as Condenser is under vacuum. 2) Breaker Isolation from CCR 3) Press the EPB of pump & discharge valve 4) Close the Canister Vent 5) Close the Discharge Vent 6) Close the Discharge Valve 7) Close the Discharge Bypass Valve 8) Close the Suction relief valve 9) Close the Suction Valve 10) Close the Sealing water valves (2 nos) to Stuffing box. 11) Open the suction strainer vent & check vacuum. Ensure that there should not be air sucking 12) Close the Suction Strainer Vent 13) Clearance for Strainer Cleaning Normalization after Strainer Cleaning: 1) 2) 3) 4) 5) 6) Close the Suction Strainer Drain Close the Suction Strainer Vent Open the Sealing water valves (2 nos) to Stuffing box. Open the Canister Vent Open the Discharge Vent Open the Suction Strainer Vent slightly & ensure there should be air sucking to the vent & close it 7) Open the Suction Valve very slowly 8) Open the Suction relief valve 9) Open the Discharge Bypass Valve 10) Release the EPB of pump & discharge valve 11) Breaker Normalization 12) Clearance for Pump Start Cross Reference : RECORDS : Nil

    Page 2 of 2 Desk Engineer Prepared By Head - Operation Reviewed & Approved By

    You might also like