P3NA80FI Datasheet

www.DataSheet4U.
com
STP3NA80
STP3NA80FI
N - CHANNEL ENHANCEMENT MODE
FAST POWER MOS TRANSISTOR
TYPE
STP3NA80
STP3NA80FI
V DSS
R DS( on)
ID
800 V
800 V
< 4.5
< 4.5
3.1 A
2A
TYPICAL RDS(on) = 3.5

30V GATE TO SOURCE VOLTAGE RATING
100% AVALANCHE TESTED
REPETITIVE AVALANCHE DATA AT 100oC
LOW INTRINSIC CAPACITANCES
GATE GHARGE MINIMIZED
REDUCED THRESHOLD VOLTAGE SPREAD
DESCRIPTION
This series of POWER MOSFETS represents the
most advanced high voltage technology. The
optimized cell layout coupled with a new
proprietary edge termination concur to give the
device low RDS(on) and gate charge, unequalled
ruggedness and superior switching performance.
3
1
TO-220
ISOWATT220
INTERNAL SCHEMATIC DIAGRAM
APPLICATIONS
HIGH CURRENT, HIGH SPEED SWITCHING
SWITCH MODE POWER SUPPLIES (SMPS)
DC-AC CONVERTERS FOR WELDING

EQUIPMENT AND UNINTERRUPTIBLE
POWER SUPPLIES AND MOTOR DRIVE
ABSOLUTE MAXIMUM RATINGS

Symbol
Parameter
Value
STP3NA80
VD S
V DG R
V GS
800
Drain-gate Voltage (RG S = 20 k)
800
30
Gate-source Voltage
Drain Current (continuous) at T c = 25 oC
ID
Drain Current (continuous) at T c = 100 oC
P tot
V ISO
T stg
Tj
STP5NA80FI
Drain-source Voltage (V GS = 0)
ID
ID M()
Unit
Drain Current (pulsed)

o
3.1
1.3
12.5
12.5
Total Dissipation at Tc = 25 C
100
40
Derating Factor
1.25
0.32
W/o C
2000
Insulation Withstand Voltage (DC)

Storage Temperature
Max. Operating Junction Temperature
-65 to 150
150
() Pulse width limited by safe operating area
November 1993
1/10
www.DataSheet4U.com
STP3NA80/FI
THERMAL DATA
R thj-cas e
Rthj- amb
Rt hc- sin k
Tl
Thermal Resistance Junction-case
TO-220
ISOWATT220
0.8
3.12
Max
Thermal Resistance Junction-ambient

Max
Thermal Resistance Case-sink
Typ
Maximum Lead Temperature For Soldering Purpose
C/W
62.5
0.5
300
C/W
C/W
o
C
Max Value
Unit
AVALANCHE CHARACTERISTICS
Symbol
Parameter
IA R
Avalanche Current, Repetitive or Not-Repetitive

(pulse width limited by T j max, < 1%)
3.1
E AS
Single Pulse Avalanche Energy

(starting T j = 25 o C, ID = I AR, VD D = 50 V)
48
mJ
E AR
Repetitive Avalanche Energy

(pulse width limited by T j max, < 1%)
mJ
IA R
Avalanche Current, Repetitive or Not-Repetitive

(T c = 100 o C, pulse width limited by T j max, < 1%)
ELECTRICAL CHARACTERISTICS (Tcase = 25 C unless otherwise specified)

OFF
Symbol
V( BR)DSS
Parameter
Drain-source
Breakdown Voltage
Test Conditions
I D = 250 A
VG S = 0
I DS S
Zero Gate Voltage

V DS = Max Rating
Drain Current (V GS = 0) V DS = Max Rating x 0.8
IG SS
Gate-body Leakage
Current (V D S = 0)
Min.
Typ.
Max.
800
Unit
V
T c = 125 oC
V GS = 30 V
250
1000
A
A
100
nA
ON ()
Symbol
Parameter
Test Conditions
ID = 250 A
V G S(th)
Gate Threshold Voltage V DS = V GS
R DS( on)
Static Drain-source On
Resistance
V GS = 10V ID = 1.5 A
V GS = 10V I D = 1.5 A
I D( on)
On State Drain Current
V DS > ID( on) x RD S(on) max

V GS = 10 V
Min.
Typ.
Max.
Unit
2.25
3.75
3.5
4.5
9
T c = 100 o C
3.1
DYNAMIC
Symbol
gfs ()
C iss
C oss
C rss
2/10
Parameter
Test Conditions
Forward
Transconductance
V DS > ID( on) x RD S(on) max
Input Capacitance
Output Capacitance
Reverse Transfer
Capacitance
V DS = 25 V
f = 1 MHz
ID = 1.5 A
VG S = 0
Min.
Typ.
1.5
3
730
85
20
Max.
Unit
S
950
115
30
pF
pF
pF
www.DataSheet4U.com
STP3NA80/FI
ELECTRICAL CHARACTERISTICS (continued)
SWITCHING ON
Symbol
t d(on)
tr
(di/dt) on
Qg
Q gs
Q gd
Typ.
Max.
Unit
Turn-on Time
Rise Time
Parameter
V DD = 400 V I D = 1.5 A
VGS = 10 V
R G = 47
(see test circuit, figure 3)
Test Conditions
25
55
35
75
ns
ns
Turn-on Current Slope
V DD = 640 V I D = 3 A
R G = 47
VGS = 10 V
180
Total Gate Charge

Gate-Source Charge
Gate-Drain Charge
V DD = 640 V
ID = 3 A
Min.
V GS = 10 V
A/s
35
6
15
50
nC
nC
nC
Typ.
Max.
Unit
50
15
75
70
25
100
ns
ns
ns
Typ.
Max.
Unit
3.1
12.5
A
A
SWITCHING OFF
Symbol
t r(Vof f)
tf
tc
Parameter
Off-voltage Rise Time
Fall Time
Cross-over Time
Test Conditions
Min.
V DD = 640 V I D = 3 A
R G = 47 VGS = 10 V
SOURCE DRAIN DIODE

Symbol
Parameter
Test Conditions
IS D
I SDM()
Source-drain Current
Source-drain Current
(pulsed)
V S D ()
Forward On Voltage
I SD = 3.1 A
Reverse Recovery
Time
Reverse Recovery
Charge
Reverse Recovery
Current
I SD = 3.1 A di/dt = 100 A/s

T j = 150 o C
V DD = 100 V
t rr
Q rr
I RRM
Min.
V GS = 0
1.6
700
ns
9.5
27
() Pulsed: Pulse duration = 300 s, duty cycle 1.5 %

() Pulse width limited by safe operating area
Safe Operating Areas For TO-220
Safe Operating Areas For ISOWATT220
3/10
www.DataSheet4U.com
STP3NA80/FI
Thermal Impedeance For TO-220
Thermal Impedance For ISOWATT220
Derating Curve For TO-220
Derating Curve For ISOWATT220
Output Characteristics
Transfer Characteristics
4/10
www.DataSheet4U.com
STP3NA80/FI
Transconductance
Static Drain-source On Resistance
Gate Charge vs Gate-source Voltage
Capacitance Variations
Normalized Gate Threshold Voltage vs

Temperature
Normalized On Resistance vs Temperature
5/10
www.DataSheet4U.com
STP3NA80/FI
Turn-on Current Slope
Turn-off Drain-source Voltage Slope
Cross-over Time
Switching Safe Operating Area
Accidental Overload Area
Source-drain Diode Forward Characteristics
6/10
www.DataSheet4U.com
STP3NA80/FI
Fig. 1: Unclamped Inductive Load Test Circuits
Fig. 2: Unclamped Inductive Waveforms
Fig. 3: Switching Times Test Circuits For

Resistive Load
Fig. 4: Gate Charge Test Circuit
Fig. 5: Test Circuit For Inductive Load Switching

And Diode Reverse Recovery Time
7/10
www.DataSheet4U.com
STP3NA80/FI
TO-220 MECHANICAL DATA

mm
DIM.
MIN.
inch
TYP.
MAX.
MIN.
TYP.
MAX.
4.40
4.60
0.173
0.181
1.23
1.32
0.048
0.051
2.40
2.72
0.094
D1
0.107
1.27
0.050
0.49
0.70
0.019
0.027
0.61
0.88
0.024
0.034
F1
1.14
1.70
0.044
0.067
F2
1.14
1.70
0.044
0.067
4.95
5.15
0.194
0.203
G1
2.4
2.7
0.094
0.106
H2
10.0
10.40
0.393
0.409
L2
16.4
0.645
L4
13.0
14.0
0.511
0.551
L5
2.65
2.95
0.104
0.116
L6
15.25
15.75
0.600
0.620
L7
6.2
6.6
0.244
0.260
3.5
3.93
0.137
0.154
3.75
3.85
0.147
0.151
D1
L9
DIA.
H2
G1
F1
L2
F2
Dia.
L5
L9
L7
L6
L4
P011C
8/10
www.DataSheet4U.com
STP3NA80/FI
ISOWATT220 MECHANICAL DATA

mm
DIM.
MIN.
inch
TYP.
MAX.
MIN.
TYP.
MAX.
4.4
4.6
0.173
0.181
2.5
2.7
0.098
0.106
2.5
2.75
0.098
0.108
0.4
0.7
0.015
0.027
0.75
0.030
0.039
F1
1.15
1.7
0.045
0.067
F2
1.15
1.7
0.045
0.067
4.95
5.2
0.195
0.204
G1
2.4
2.7
0.094
0.106
10
10.4
0.393
0.409
L2
16
0.630
28.6
30.6
1.126
1.204
L4
9.8
10.6
0.385
0.417
L6
15.9
16.4
0.626
0.645
L7
9.3
0.354
0.366
3.2
0.118
0.126
L3
L3
L6
F1
L7
F2
G1
1 2 3
L2
L4
P011G
9/10
www.DataSheet4U.com
STP3NA80/FI
Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsability for the
consequences of use of such information nor for any infringement of patents or other rights of third parties which may results from its use. No
license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned
in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied.
SGS-THOMSON Microelectronics products are not authorized for use as critical components in life support devices or systems without express
written approval of SGS-THOMSON Microelectonics.
1994 SGS-THOMSON Microelectronics - All Rights Reserved
SGS-THOMSON Microelectronics GROUP OF COMPANIES
Australia - Brazil - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A
10/10

P3NA80FI Datasheet

Uploaded by

Copyright:

Available Formats

P3NA80FI Datasheet

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

P3NA80FI Datasheet

Uploaded by

Copyright:

Available Formats

www.DataSheet4U.

TYPICAL RDS(on) = 3.5

INTERNAL SCHEMATIC DIAGRAM

SWITCH MODE POWER SUPPLIES (SMPS)

DC-AC CONVERTERS FOR WELDING

ABSOLUTE MAXIMUM RATINGS

Drain-gate Voltage (RG S = 20 k)

Drain Current (continuous) at T c = 100 oC

Drain Current (pulsed)

Insulation Withstand Voltage (DC)

() Pulse width limited by safe operating area

Thermal Resistance Junction-case

Thermal Resistance Junction-ambient

Avalanche Current, Repetitive or Not-Repetitive

Single Pulse Avalanche Energy

Repetitive Avalanche Energy

Avalanche Current, Repetitive or Not-Repetitive

ELECTRICAL CHARACTERISTICS (Tcase = 25 C unless otherwise specified)

Zero Gate Voltage

Gate Threshold Voltage V DS = V GS

On State Drain Current

V DS > ID( on) x RD S(on) max

V DS > ID( on) x RD S(on) max

Turn-on Current Slope

Total Gate Charge

SOURCE DRAIN DIODE

I SD = 3.1 A di/dt = 100 A/s

() Pulsed: Pulse duration = 300 s, duty cycle 1.5 %

Safe Operating Areas For TO-220

Safe Operating Areas For ISOWATT220

Thermal Impedeance For TO-220

Thermal Impedance For ISOWATT220

Derating Curve For TO-220

Derating Curve For ISOWATT220

Static Drain-source On Resistance

Gate Charge vs Gate-source Voltage

Normalized Gate Threshold Voltage vs

Normalized On Resistance vs Temperature

Turn-on Current Slope

Turn-off Drain-source Voltage Slope

Switching Safe Operating Area

Accidental Overload Area

Source-drain Diode Forward Characteristics

Fig. 1: Unclamped Inductive Load Test Circuits

Fig. 2: Unclamped Inductive Waveforms

Fig. 3: Switching Times Test Circuits For

Fig. 4: Gate Charge Test Circuit

Fig. 5: Test Circuit For Inductive Load Switching

TO-220 MECHANICAL DATA

ISOWATT220 MECHANICAL DATA

You might also like