STP55NE06 STP55NE06FP: N - Channel Enhancement Mode " Single Feature Size " Power Mosfet

STP55NE06 STP55NE06FP
N - CHANNEL ENHANCEMENT MODE SINGLE FEATURE SIZE POWER MOSFET

TYPE ST P55NE06 ST P55NE06FP
s s s s s s
V DSS 60 V 60 V
R DS(on) < 0.022 < 0.022
ID 55 A 30 A
TYPICAL RDS(on) = 0.019 EXCEPTIONAL dv/dt CAPABILITY 100% AVALANCHE TESTED LOW GATE CHARGE 100 oC HIGH dv/dt CAPABILITY APPLICATION ORIENTED CHARACTERIZATION TO-220
3
1 2
DESCRIPTION This Power Mosfet is the latest development of SGS-THOMSON unique Single Feature Size strip-based process. The resulting transistor shows extremely high packing density for low onresistance, rugged avalance characteristics and less critical alignment steps therefore a remarkable manufacturing reproducibility. APPLICATIONS s DC MOTOR CONTROL s DC-DC & DC-AC CONVERTERS s SYNCHRONOUS RECTIFICATION
TO-220FP
INTERNAL SCHEMATIC DIAGRAM
ABSOLUTE MAXIMUM RATINGS

Symbol Parameter Value STP55NE06 V DS V DGR V GS ID ID IDM () P t ot Drain-source Voltage (V GS = 0) Drain- gate Voltage (R GS = 20 k) Gate-source Voltage Drain Current (continuous) at Tc = 25 C Drain Current (continuous) at Tc = 100 C Drain Current (pulsed) Total Dissipation at Tc = 25 C Derating F actor V ISO dv/dt T stg Tj Insulation Withstand Voltage (DC) Peak Diode Recovery voltage slope Storage T emperature Max. O perating Junction Temperature
o o o
Uni t
STP55NE06FP 60 60 20 V V V 30 21 220 35 0.27 2000 7 A A A W W/ C V V/ ns

o o o
55 39 220 130 0.96
-65 to 175 175

( 1) ISD 55 A, di/dt 300 A/s, VDD V(BR)DSS, Tj TJMAX
C C 1/9
() Pulse width limited by safe operating area
January 1998
STP55NE06/FP
THERMAL DATA
T O-220 R t hj-ca se R t hj- amb R thc- si nk Tl Thermal Resistance Junction-case Max 1.15 62.5 0.5 300 TO-220F P 4.28
o o o
C/W C/W C/W o C
Thermal Resistance Junction-ambient Max Thermal Resistance Case-sink Typ Maximum Lead Temperature For Soldering Purpose
AVALANCHE CHARACTERISTICS
Symb ol I AR E AS Parameter Avalanche Current, Repetitive or Not-Repetitive (pulse width limited by Tj max, < 1%) Single Pulse Avalanche Energy o (starting Tj = 25 C, I D = IAR , VDD = 25 V) Max Valu e 55 200 Unit A mJ
ELECTRICAL CHARACTERISTICS (Tcase = 25 oC unless otherwise specified) OFF

Symb ol V (BR)DSS I DSS Parameter Drain-source Breakdown Voltage Test Cond ition s I D = 250 A V GS = 0 Min. 60 1 10 100 Typ . Max. Un it V A A nA
Zero G ate Voltage V DS = Max Rating Drain Current (VGS = 0) V DS = Max Rating o C Gate-body Leakage Current (V DS = 0) V GS = 20 V
T c = 125
I GSS
ON ()
Symb ol V GS(th) R DS( on) ID(o n) Parameter Gate Threshold Voltage V DS = VGS Test Cond ition s ID = 250 A ID = 27.5 A 55 Min. 2 Typ . 3 0.019 Max. 4 0.022 Un it V A
Static Drain-source On V GS = 10V Resistance
On State Drain Current V DS > I D(on) x R DS(on) max V GS = 10 V
DYNAMIC
Symb ol g fs () C iss C oss C rss Parameter Forward Transconductance Input Capacitance Output Capacitance Reverse T ransfer Capacitance Test Cond ition s V DS > I D(on) x R DS(on) max V DS = 25 V f = 1 MHz I D =27.5 A VGS = 0 Min. 25 Typ . 35 3050 380 100 4000 500 130 Max. Un it S pF pF pF
2/9
STP55NE06/FP
ELECTRICAL CHARACTERISTICS (continued) SWITCHING ON
Symb ol t d(on) tr Qg Q gs Q gd Parameter Turn-on Time Rise Time Total Gate Charge Gate-Source Charge Gate-Drain Charge Test Cond ition s V DD = 30 V ID = 27.5 A R G =4.7 W V GS = 10 V (see test circuit, figure 3) V DD = 48 V I D = 55 A V GS = 10 V Min. Typ . 30 120 80 13 25 Max. 40 160 105 Un it ns ns nC nC nC
SWITCHING OFF
Symb ol t r(Vof f) tf tc Parameter Off-voltage Rise Time Fall Time Cross-over Time Test Cond ition s V DD = 48 V I D = 55 A R G =4.7 VGS = 10 V (see test circuit, figure 5) Min. Typ . 20 50 75 Max. 30 70 100 Un it ns ns ns
SOURCE DRAIN DIODE

Symb ol I SD I SDM () V SD () t rr Q rr I RRM Parameter Source-drain Current Source-drain Current (pulsed) Forward On Voltage Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current I SD = 60 A V GS = 0 110 430 7.5 Test Cond ition s Min. Typ . Max. 55 220 1.5 Un it A A V ns C A
di/dt = 100 A/s I SD = 55 A o Tj = 150 C V DD = 30 V (see test circuit, figure 5)
() Pulsed: Pulse duration = 300 s, duty cycle 1.5 % () Pulse width limited by safe operating area
Safe Operating Area for TO-220
Safe Operating Area for TO-220FP
3/9
STP55NE06/FP
Thermal Impedance for TO-220 Thermal Impedance forTO-220FP
Output Characteristics
Transfer Characteristics
Transconductance
Static Drain-source On Resistance
4/9
STP55NE06/FP
Gate Charge vs Gate-source Voltage Capacitance Variations
Normalized Gate Threshold Voltage vs Temperature
Normalized On Resistance vs Temperature
Source-drain Diode Forward Characteristics
5/9
STP55NE06/FP
Fig. 1: Unclamped Inductive Load Test Circuit Fig. 2: Unclamped Inductive Waveform
Fig. 3: Switching Times Test Circuits For Resistive Load
Fig. 4: Gate Charge test Circuit
Fig. 5: Test Circuit For Inductive Load Switching And Diode Recovery Times
6/9
STP55NE06/FP
TO-220 MECHANICAL DATA

DIM. MIN. A C D D1 E F F1 F2 G G1 H2 L2 L4 L5 L6 L7 L9 DIA. 13.0 2.65 15.25 6.2 3.5 3.75 0.49 0.61 1.14 1.14 4.95 2.4 10.0 16.4 14.0 2.95 15.75 6.6 3.93 3.85 0.511 0.104 0.600 0.244 0.137 0.147
E
mm TYP. MAX. 4.60 1.32 2.72 1.27 0.70 0.88 1.70 1.70 5.15 2.7 10.40 0.019 0.024 0.044 0.044 0.194 0.094 0.393 MIN. 0.173 0.048 0.094 4.40 1.23 2.40
inch TYP. MAX. 0.181 0.051 0.107 0.050 0.027 0.034 0.067 0.067 0.203 0.106 0.409 0.645 0.551 0.116 0.620 0.260 0.154 0.151
D1
L2 F1
G1
Dia. F2 F
L5 L7 L6
L9
L4
H2
P011C
7/9
STP55NE06/FP
TO-220FP MECHANICAL DATA

DIM. MIN. A B D E F F1 F2 G G1 H L2 L3 L4 L6 L7 28.6 9.8 15.9 9 3 4.4 2.5 2.5 0.45 0.75 1.15 1.15 4.95 2.4 10 16 30.6 10.6 16.4 9.3 3.2 1.126 0.385 0.626 0.354 0.118 mm TYP. MAX. 4.6 2.7 2.75 0.7 1 1.7 1.7 5.2 2.7 10.4 MIN. 0.173 0.098 0.098 0.017 0.030 0.045 0.045 0.195 0.094 0.393 0.630 1.204 0.417 0.645 0.366 0.126 inch TYP. MAX. 0.181 0.106 0.108 0.027 0.039 0.067 0.067 0.204 0.106 0.409
L3 L6 L7 F1 F
G1
F2
1 2 3 L2 L4
8/9
STP55NE06/FP
Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsability for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may results from its use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersede and replaces all information previously supplied. s SGS-THOMSON Microelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of SGS-THOMSON Microelectonics. 1997 SGS-THOMSON Microelectronics - Printed in Italy - All Rights Reserved SGS-THOMSON Microelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - France - Germany - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A ...
9/9

STP55NE06 STP55NE06FP: N - Channel Enhancement Mode " Single Feature Size " Power Mosfet

Uploaded by

Copyright:

Available Formats

STP55NE06 STP55NE06FP: N - Channel Enhancement Mode " Single Feature Size " Power Mosfet

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

STP55NE06 STP55NE06FP: N - Channel Enhancement Mode " Single Feature Size " Power Mosfet

Uploaded by

Copyright:

Available Formats

STP55NE06 STP55NE06FP

N - CHANNEL ENHANCEMENT MODE SINGLE FEATURE SIZE POWER MOSFET

R DS(on) < 0.022 < 0.022

INTERNAL SCHEMATIC DIAGRAM

ABSOLUTE MAXIMUM RATINGS

STP55NE06FP 60 60 20 V V V 30 21 220 35 0.27 2000 7 A A A W W/ C V V/ ns

55 39 220 130 0.96

-65 to 175 175

() Pulse width limited by safe operating area

C/W C/W C/W o C

ELECTRICAL CHARACTERISTICS (Tcase = 25 oC unless otherwise specified) OFF

Static Drain-source On V GS = 10V Resistance

On State Drain Current V DS > I D(on) x R DS(on) max V GS = 10 V

SOURCE DRAIN DIODE

di/dt = 100 A/s I SD = 55 A o Tj = 150 C V DD = 30 V (see test circuit, figure 5)

Safe Operating Area for TO-220

Safe Operating Area for TO-220FP

Static Drain-source On Resistance

Normalized Gate Threshold Voltage vs Temperature

Normalized On Resistance vs Temperature

Source-drain Diode Forward Characteristics

Fig. 3: Switching Times Test Circuits For Resistive Load

Fig. 4: Gate Charge test Circuit

TO-220 MECHANICAL DATA

TO-220FP MECHANICAL DATA

You might also like