Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 535 views

    Control Module: Eneral Nformation

    Uploaded by

    durok
    modulos

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Control Module: Eneral Nformation

    Uploaded by

    durok
    535 views2 pages
    modulos

    Original Title

    cmx2spec

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    modulos

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    535 views2 pages

    Control Module: Eneral Nformation

    Uploaded by

    durok
    modulos

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Technical Data Bulletin

    CMX/2- 30198

    CMX-2
    Control Module

    GENERAL INFORMATION
    The Chemetron Fire Systems CMX-2 Control Mod-
    ule is used with the Micro 200-I, 300-I, & 400-I
    Control Panels to provide a single Notification Ap-
    pliance Circuit (NAC) or Form-C relay.

    FEATURES
    P Built-in type identification automatically identifies
    this device as a CMX-2 to the control panel.
    P Internal circuitry and relay powered directly by 2-
    wire SLC loop. NAC configuration uses second CMX-2 Control Module
    loop for notification appliance power.
    P Integral LED blinks each time a communication is
    received from the control panel (optional feature
    available with the Micro 200-I, 300-I, & 400-I.)
    P High noise immunity (EMF/RFI).
    P May be used to switch 24 volt NAC power, Audio
    (up to 70.7 VRMS) or telephone.
    P Wide viewing angle of LED.
    P SEMS screws with clamping plates for wiring
    ease.
    P Direct dial entry of decade address (01-99).
    P Built-in magnetic test switch.
    P Speaker, audible/visual, and telephone applica-
    tions may use wire Style Y or Z.

    CONSTRUCTION
    P Face Plate made of LEXAN with off-white color. Face Plate

    P Controls include two rotary switches for Direct


    Dial entry of DECADE Address (01-99).
    APPLICATIONS
    P As shipped, configured for a single Style Y (Class
    B) or Style Z (Class A) Notification Appliance
    P Used to switch 24 VDC audible/visual power, high
    Circuit.
    level audio (speakers), or telephone devices.
    P May be modified in the field to provide a single
    Form-C (SPDT) dry contact. P May be programmed to operate dry contacts for
    door holders, air handling unit shutdown, etc., and
    to reset 4-wire smoke detector power.

    1998 Chemetron Fire Systems All rights reserved (3/98). MANUFACTURED BY NOTIFIER
    4801 Southwick Drive Matteson, IL 60443 708/748-1503 FAX 708/748-2847
    Technical Data Bulletin
    CMX/2- 30198
    Rotary switches set a unique address for each module.
    The address may be set before or after mounting. The
    built-in TYPE CODE (not settable) will identify the module
    Mounting the CMX-2 to a to the control panel, so as to differentiate between a
    4" square, 2-1/8" deep module and a sensor address.
    junction box. A built-in magnetic test switch is provided to simulate a
    short circuit on the NAC to test the CMX-2.

    SPECIFICATIONS
    Operating Voltage: 15 28 volts DC (Peak)
    Current Range: 5 mA for LED latched in alarm
    Standby Current: 300 FA maximum plus super-
    vision
    Pulsing Current: 30 mA for 15 mS.
    Supervision Current: 0 FA OPEN
    100 FA NORMAL
    200 FA SHORT
    Contact Rating: 2.0 Amp @ 30 VDC (resistive)
    1.0 Amp @ 30 VDC (inductive,
    0.6 PF)
    OPERATION 0.3 Amp @ 110 VAC
    0.6 Amp @ 30 VDC (pilot duty,
    0.35 PF)
    Each CMX-2 uses one of 99 possible module addresses Temperature Range: 0E to 49EC (32E to 120EF)
    on a SLC loop. It responds to regular polls from the Humidity Range: 10% 95% Relative
    addresses on a control panel and reports its type and Weight: 5.0 oz. (150 g)
    status including the open/normal/short status of its
    Notification Appliance Circuit (NAC). The LED blinks with Relay Contact Ratings
    each poll received. On command, the CMX-2 activates its
    internal relay. The CMX-2 supervises Style Y (Class B) or Resistive: 2 Amp @ 30 VDC
    Style Z (Class A) notification or control circuits. Inductive: 1 Amp @ 30 VDC (0.6 PF)
    Pilot Duty: 0.6 Amp @ 30 VDC (0.35 PF)
    Upon code command from the panel, the CMX-2 will 0.3 Amp @ 110 VDC (0.35 PF)
    disconnect the supervision and connect the external pow- 0.3 Amp @ 120 VAC (0.35 PF)
    er supply in the proper polarity across the load device.
    The disconnection of the supervision provides a positive
    indication to the panel that the control relay has turned PRODUCT LINE INFORMATION
    ON. The external power supply is always relay isolated
    from the communication loop so a trouble condition on CMX-2 . . . . Analog, Intelligent Control Module.
    the external power supply will never interfere with the rest CB 500 . . . . Control Module Barrier, required by UL
    of the system. for separating power limited and non-
    Relay control with Form-C contacts is obtained by break- power limited wiring in the same junc-
    ing off tabs J1 and J2. tion box as CMX-2.
    70100740 . . Surface Mount Backbox

    Ordering Information

    Shipping Weight
    Stock Number Description lbs (kg)
    70100725 CMX-2 Control Module .6 (.27)
    70100755 Control Module Barrier CB-500 .6 (.27)
    70100740 Surface Mount Backbox .6 (.27)

    1998 Chemetron Fire Systems All rights reserved (3/98). MANUFACTURED BY NOTIFIER
    4801 Southwick Drive Matteson, IL 60443 708/748-1503 FAX 708/748-2847

    You might also like