www.atos.

com Table C073-16/E

Pressure relief valves type REM

two stage, flange mounting SAE 3/4, 1, 11/4

REM are two stage pressure relief valves

with balanced poppet and SAE flange con-
nection, designed to operate in oil hydrau-
lic systems.
They can be directly mounted with SAE
flange attachments on the pumps outlet
ports  and, in particular, on the PFE
pumps (see tab. A005, A007).
In standard versions the piloting pressure
of the poppet  of the main stage  is
regulated by means of a grub screw 
protected by cap  in the cover .
Optional versions with setting adjustment
by handwheel  instead of the grub screw
are available on request.
Clockwise rotation increases the pressure.
REM can be equipped with a venting sole-
noid valve type:
DHI for AC and DC supply, with CURUS
certified solenoids
DHE for AC and DC supply, high
performances, with CURUS certified sole-
noids
Mounting surface:
SAE flange connection: 3/4", 1", 11/4"
Max flow: 200, 400 and 600 l/min respectively
REM-3/20...-E REM-4/210/V Pressure up to 350 bar (depending on
models)
1 MODEL CODE

REM - 4 / 20 210 / 100/100 / V - I X 24DC ** / *

REM = pressure relief Seals material,
valve SAE flange see section :
mounting - = NBR
PE = FKM
BT = HNBR
Size: 3 = SAE 3/4"
4 = SAE 1" Series number
5 = SAE 11/4"
Voltage code, see section 

Setting pressure and venting option (1): X = without connector (1):

- =one setting pressure without option See section  for available connectors, to be
10=one setting pressure with venting, ordered separately
with de-energized solenoid -00 = solenoid valve without coils (for -I)
11=one setting pressure with venting, with -00-AC = AC solenoid valve without coils (for -E)
energized solenoid -00-DC = DC solenoid valve without coils (for -E)
20=two setting pressure with venting,
with de-energized solenoid Pilot valve (1):
21=two setting pressure with venting, with
-I = DHI for AC and DC supply
energized solenoid
with CURUS certified solenoids
22=two setting pressure without venting
-E = DHE for AC and DC supply, high performances
32=three setting pressure without venting
with CURUS certified solenoids

Options (2):
WP = prolonged manual override protected by rubber cap (1)
V = regulating by handwheel instead of a grub screw protected by
cap

Pressure range: Pressure range of second/third setting (1):

50 = 450 bar; 50 = 450 bar;
100 = 6100 bar; 100 = 6100 bar;
210 = 7210 bar; 210 = 7210 bar;
350 = 8350 bar (only for REM-3) 350 = 8350 bar (only for REM-3)

(1) Only for REM with solenoid valve for venting and/or for the selection of the setting pressure
(2) For handwheel features, see technical table K150

C073
 2 HYDRAULIC CHARACTERISTICS

REM-*/10 REM-*/11 REM-*/22

REM

REM-*/20 REM-*/21 REM-*/32

Valve model REM-3 REM-4 REM-5

Max flow [l/min] 200 400 600
Pressure range [bar] 4-50; 6-100; 7-210; 8-350 450; 6100; 7210
ports P, X = 350
Max pressure [bar] Port T = 210 (without pilot solenoid valve)
For version with pilot solenoid valve, see technical tables E010 and E015

3 MAIN CHARACTERISTICS, SEALS AND FLUIDS - for other fluids not included in above table, consult our technical office
Assembly position Any position
Standard execution = -30C +70C
Ambient temperature /PE option = -20C +70C
/BT option = -40C +70C
NBR seals (standard) = -20C +60C, with HFC hydraulic fluids = -20C +50C
Seals, recommended fluid temperature FKM seals (/PE option) = -20C +80C
HNBR seals (/BT option) = -40C +60C, with HFC hydraulic fluids = -40C +50C
Recommended viscosity 15100 mm2/s - max allowed range 2,8 500 mm2/s
Fluid contamination class ISO 4406 class 21/19/16 NAS 1638 class 10, in line filters of 25 m (10 >
_ 75 recommended)
Hydraulic fluid Suitable seals type Classification Ref. Standard
Mineral oils NBR, FKM, HNBR HL, HLP, HLPD, HVLP, HVLPD DIN 51524

Flame resistant without water FKM HFDU, HFDR

ISO 12922
Flame resistant with water NBR, HNBR HFC

3.1 Coils characteristics (for ARAM with pilot solenoid valve)

Insulation class DHI pilot H (180C) Due to the occuring surface temperatures of the
solenoid coils, the European standards EN ISO 13732-1
DHE pilot H (180C) for DC coils F (155C) for AC coils and EN ISO 4413 must be taken into account

Protection degree to DIN EN 60529 IP 65 (with connectors 666, 667, 669 or E-SD correctly assembled)
Relative duty factor 100%
Supply voltage and frequency See electric feature 
Supply voltage tolerance 10%
Certification CURUS North American standard
 4 REGULATED PRESSURE VERSUS FLOW DIAGRAMS based on fluid viscosity of 25 mm2/s at 40
REM-3 REM-4 REM-5

Regulated pressure at port P [bar]

Regulated pressure at port P [bar]

Regulated pressure at port P [bar]

Flow rate [l/min] Flow rate [l/min] Flow rate [l/min]

5 MINIMUM PRESSURE VERSUS FLOW DIAGRAMS based on fluid viscosity of 25 mm2/s at 40 C

REM-3 REM-4 REM-5
Min. regulated pressure [bar]

Min. regulated pressure [bar]

Min. regulated pressure [bar]

Flow rate [l/min] Flow rate [l/min] Flow rate [l/min]

6 ELECTRIC CONNECTORS ACCORDING TO DIN 43650 FOR REM WITH SOLENOID VALVE
The connectors must be ordered separately
Code of connector Function
666 Connector IP-65, suitable for direct connection to electric supply source
667 As 666 connector IP-65 but with built-in signal led, suitable for direct connection to electric supply source

For other available connectors, see tab. E010 and K500.

7 ELECTRIC FEATURES FOR AGAM WITH SOLENOID VALVE

Power
Solenoid External supply Colour of
Voltage Type of consumption Code of spare coil Code of spare coil
valve nominal voltage coil label
code connector (3) DHI DHE
type 10% (1) DHI
DHI DHE
12 DC 12 DC COU-12DC green COE-12DC
666
24 DC 24 DC COU-24DC red COE-24DC
DC or 33 W 30 W
110 DC 110 DC COU-110DC black COE-110DC
667
220 DC 220 DC COU-220DC black COE-220DC
DHI
DHE 110/50 AC (2) 110/50/60 AC 60 VA 58 VA COI-110/50/60AC yellow COE-110/50/60AC
115/60 AC 115/60 AC (5) 666 - 80 VA - - COE-115/60AC
AC 120/60 AC 120/60 AC (6) or 60 VA - COI-120/60AC white -
230/50 AC (2) 230/50/60 AC 667 60 VA 58 VA COI-230/50/60AC light blue COE-230/50/60AC
230/60 AC 230/60 AC 60 VA 80 VA COI-230/60AC silver COE-230/60AC
(1) For other supply voltages available on request see technical tables E010, E015.
(2) Coil can be supplied also with 60 Hz of voltage frequency: in this case the performances are reduced by 10 15% and the power consumption is 55 VA
(DHI) and 58 VA
(3) Average values based on tests performed at nominal hydraulic condition and ambient/coil temperature of 20C.
(4) When solenoid is energized, the inrush current is approx 3 times the holding current.
(5) Only for DHE
(6) Only for DHI
 8 DIMENSIONS [mm]

REM-3

REM-3/20/**-IX
REM-3/10/**-IX REM-3/21/**-IX
REM-3/11/**-IX

109
79
58 78.5 106 78.5
Flange type WFD-20
35.25 Mass: 8,1 Kg Mass: 9,2 Kg

Flange type WFD-20

21
141
100
66

22.2
==

25

= = = =
G1/4
36 75 47.63 36 REM-3/22/**-IX REM-3/32/**-IX
3.5 92 40.5
OR-4100
Mass: 6,6 Kg
109

109
101.5 78.5 106 78.5

Mass: 8,9 Kg Mass: 9,3 Kg

REM-4 REM-4/20/**-IX
REM-4/10/**-IX REM-4/21/**-IX
REM-4/11/**-IX
109
79

58 78.5 106 78.5

Flange type WFD-25 Mass: 8,3 Kg Mass: 9,4 Kg
35.25

Flange type WFD-25

25
144
103
69.5

26.2
==

27.5

= = = =
G1/4
38 75 52.4 38
OR-4131
REM-4/22/**-IX REM-4/32/**-IX
3.5 92 40.5

Mass: 6,8 Kg
109

109

101.5 78.5 106 78.5

Mass: 9,1 Kg Mass: 9,5 Kg

Overall dimensions refer to valves with connectors type 666.

C073
REM-5
REM-5/20/**-IX
REM-5/10/**-IX REM-5/21/**-IX
REM-5/11/**-IX

109
79
58 78.5 106 78.5
Flange type WFD-32
Mass: 9,7 Kg Mass: 10,8 Kg
40.25

Flange type WFD-32

156
115
85

30.2
==

30

= = G1/4 = = REM-5/22/**-IX REM-5/32/**-IX

41 80 58.7
3.5 97 41
OR-4150

109
109

Mass: 8,2 Kg

101.5 78.5 106 78.5

Mass: 10,5 Kg Mass: 10,9 Kg

REM-3 REM-3/20/**-EX
REM-3/21/**-EX
REM-3/10/**-EX
REM-3/11/**-EX
112
82

57 94 121 94

Mass: 8,1 Kg Mass: 9,2 Kg

Flange type WFD-20
35.25

Flange type WFD-20

21
141
100
66

22.2
==

25

= = = = REM-3/22/**-EX REM-3/32/**-EX
G1/4
36 75 47.63 36
OR-4100 3.5 92 40.5
112
112

Mass: 6,6 Kg

101.5 94 121 94

Mass: 8,9 Kg Mass: 9,3 Kg

 9 DIMENSIONS [mm]

REM-4 REM-4/20/**-EX
REM-4/10/**-EX REM-4/21/**-EX
REM-4/11/**-EX

112
82
Flange type WFD-25 57 94 121 94
35.25
Mass: 8,3 Kg Mass: 9,4 Kg

Flange type WFD-25

25
144

REM-4/22/**-EX REM-4/32/**-EX
103
69.5

26.2

27.5

= = = =
G1/4

112
112
38 75 52.4 38
3.5 92 40.5
OR-4131

Mass: 6,8 Kg

101.5 94 121 94

Mass: 9,1 Kg Mass: 9,5 Kg

REM-5 REM-5/20/**-EX
REM-5/10/**-EX REM-5/21/**-EX
REM-5/11/**-EX
112
82

Flange type WFD-32 57 94 121 94

40.25
Mass: 9,7 Kg Mass: 10,8 Kg

Flange type WFD-32

156
115
85

30.2

REM-5/22/**-EX REM-5/32/**-EX
30

= = G1/4 = =
41 80 58.7
112
112

3.5 97 41
OR-4150

Mass: 8,2 Kg

101.5 94 121 94

Mass: 10,5 Kg Mass: 10,9 Kg

Overall dimensions refer to valves with connectors type 666

10 ASSEMBLY EXAMPLE OF A REM VALVE ON A PFE PUMP

LATERAL VIEW OF PUMP REAR VIEW OF PUMP TOP VIEW OF PUMP

 Pump type PFE

 Relief valve type REM

11/14