VSP PDF

DRIVER CONTROLS
APPROACHING VEHICLE SOUND FOR PEDESTRI-

SECTION VSP B
ANS (VSP)
D
E
CONTENTS
PRECAUTION ............................................... 3 APPROACHING VEHICLE SOUND FOR PE- F
DESTRIANS(VSP) SYSTEM : System Descrip-
PRECAUTIONS ................................................... 3 tion ...........................................................................13
Precaution for Technicians Using Medical Electric...... 3 G
Point to Be Checked Before Starting Maintenance CHARGE SOUND SYSTEM ......................................19
Work .......................................................................... 3 CHARGE SOUND SYSTEM : System Description....19
Precaution for Supplemental Restraint System
DIAGNOSIS SYSTEM (VSP) ............................ 21 H
(SRS) "AIR BAG" and "SEAT BELT PRE-TEN-
CONSULT Function .................................................21
SIONER" ................................................................... 3
Precaution for Removing 12V Battery ....................... 4 ECU DIAGNOSIS INFORMATION .............. 23
I
PREPARATION ............................................ 5 APPROACHING VEHICLE SOUND FOR PE-
PREPARATION ................................................... 5 DESTRIANS (VSP) CONTROL UNIT ............... 23
Commercial Service Tools ........................................ 5 Reference Value ......................................................23 J
Fail-Safe ..................................................................26
SYSTEM DESCRIPTION .............................. 6 DTC Index ...............................................................26
K
COMPONENT PARTS ........................................ 6 WIRING DIAGRAM ...................................... 27
Component Parts Location ........................................ 6
Approaching Vehicle Sound For Pedestrians
APPROACHING VEHICLE SOUND FOR PE-
(VSP) Speaker .......................................................... 7 DESTRIANS (VSP) SYSTEM ............................ 27 VSP
Start Up Sound Speaker ........................................... 7 Wiring Diagram ........................................................27
Approaching Vehicle Sound For Pedestrians
BASIC INSPECTION ................................... 31
(VSP) Control Unit ..................................................... 8 M
Approaching Vehicle Sound For Pedestrians DIAGNOSIS AND REPAIR WORKFLOW ........ 31
(VSP) OFF Switch ..................................................... 8 Work Flow ................................................................31
Approaching Vehicle Sound For Pedestrians N
(VSP) OFF Indicator .................................................. 8 DTC/CIRCUIT DIAGNOSIS ......................... 33
SYSTEM .............................................................. 9 U1431 COMM CIRCUIT .................................... 33
System Description ................................................... 9 Description ...............................................................33 O
Circuit Diagram ....................................................... 10 DTC Logic ................................................................33
Fail-Safe .................................................................. 10 Diagnosis Procedure ...............................................33
P
START UP SOUND SYSTEM ................................... 11 POWER SUPPLY AND GROUND CIRCUIT .... 35
START UP SOUND SYSTEM : System Descrip-
tion .......................................................................... 11 APPROACHING VEHICLE SOUND FOR PEDES-
TRIANS (VSP) CONTROL UNIT ...............................35
APPROACHING VEHICLE SOUND FOR PEDES- APPROACHING VEHICLE SOUND FOR PE-
TRIANS(VSP) SYSTEM ............................................ 13 DESTRIANS (VSP) CONTROL UNIT : Diagnosis
Procedure ................................................................35
Revision: 2010 November VSP-1 LEAF

APPROACHING VEHICLE SOUND FOR PE- Description .............................................................. 52
DESTRIANS (VSP) SPEAKER SIGNAL CIR- Diagnosis Procedure ............................................... 52
CUIT ................................................................... 36
THE DRIVING SOUND DOES NOT SOUND ... 53
Description .............................................................. 36
Description .............................................................. 53
Component Function Check ................................... 36
Diagnosis Procedure ............................................... 53
Diagnosis Procedure .............................................. 36
THE APPROACHING VEHICLE SOUND FOR
START UP SOUND SPEAKER SIGNAL CIR-
PEDESTRIANS (VSP) SPEAKER DOES NOT
CUIT ................................................................... 38
Description .............................................................. 38
SOUND .............................................................. 54
Description .............................................................. 54
APPROACHING VEHICLE SOUND FOR PE- THE START UP SOUND SPEAKER DOES
DESTRIANS (VSP) OFF SWITCH SIGNAL NOT SOUND ...................................................... 55
Description .............................................................. 55
CIRCUIT ............................................................. 40
Description .............................................................. 40
Component Function Check ................................... 40 THE CHARGE SOUND DOES NOT SOUND ... 56
Diagnosis Procedure .............................................. 40 Description .............................................................. 56
Component Inspection ............................................ 41 Diagnosis Procedure ............................................... 56
APPROACHING VEHICLE SOUND FOR PE- THE POWER SWITCH OPERATION SOUND
DESTRIANS (VSP) OFF INDICATOR SIGNAL DOES NOT SOUND .......................................... 57
CIRCUIT ............................................................. 42 Description .............................................................. 57
Description .............................................................. 42 Diagnosis Procedure ............................................... 57
NORMAL OPERATING CONDITION ................ 58
STOP LAMP SWITCH SIGNAL CIRCUIT ......... 44
Description .............................................................. 44 APPROACHING VEHICLE SOUND FOR PEDES-
Component Function Check ................................... 44 TRIANS(VSP) SYSTEM ............................................ 58
Diagnosis Procedure .............................................. 44 APPROACHING VEHICLE SOUND FOR PE-
Component Inspection ............................................ 45 DESTRIANS(VSP) SYSTEM : Description ............. 58
CHARGE PULSE SIGNAL CIRCUIT ................. 46 START UP SOUND SYSTEM ................................... 58

Description .............................................................. 46 START UP SOUND SYSTEM : Description ........... 58
CHARGE SOUND SYSTEM ...................................... 58
CHARGE SOUND SYSTEM : Description .............. 58
POWER SWITCH SIGNAL CIRCUIT ................ 48
REMOVAL AND INSTALLATION .............. 59
Description .............................................................. 48
Component Function Check ................................... 48 APPROACHING VEHICLE SOUND FOR PE-
Diagnosis Procedure .............................................. 48 DESTRIANS (VSP) CONTROL UNIT ................ 59
Component Inspection ............................................ 49 Removal and Installation ......................................... 59
SYMPTOM DIAGNOSIS ............................. 50 START UP SOUND SPEAKER ......................... 60
Removal and Installation ......................................... 60
APPROACHING VEHICLE SOUND FOR PE-
DESTRIANS (VSP) SYSTEM SYMPTOMS ....... 50 APPROACHING VEHICLE SOUND FOR PE-
Symptom Table ...................................................... 50 DESTRIANS (VSP) SPEAKER ......................... 61
Exploded View ........................................................ 61
THE APPROACHING VEHICLE SOUND FOR
Removal and Installation ......................................... 61
PEDESTRIANS (VSP) OFF INDICATOR Disassembly and Assembly .................................... 61
DOES NOT TURN ON OR OFF ......................... 51
Description .............................................................. 51 APPROACHING VEHICLE SOUND FOR PE-
Diagnosis Procedure .............................................. 51 DESTRIANS (VSP) OFF SWITCH .................... 62
Exploded View ........................................................ 62
THE APPROACHING VEHICLE SOUND FOR Removal and Installation ......................................... 62
PEDESTRIANS (VSP) SYSTEM CAN NOT BE
CANCELED ....................................................... 52

PRECAUTIONS
< PRECAUTION >
PRECAUTION A
PRECAUTIONS
Precaution for Technicians Using Medical Electric INFOID:0000000007071907
B
OPERATION PROHIBITION
WARNING: C
• Parts with strong magnet is used in this vehicle.
• Technicians using a medical electric device such as pacemaker must never perform operation on the
vehicle, as magnetic field can affect the device function by approaching to such parts.
D
NORMAL CHARGE PRECAUTION
WARNING:
• If a technician uses a medical electric device such as an implantable cardiac pacemaker or an E
implantable cardioverter defibrillator, the possible effects on the devices must be checked with the
device manufacturer before starting the charge operation.
• As radiated electromagnetic wave generated by on board charger at normal charge operation may
F
effect medical electric devices, a technician using a medical electric device such as implantable car-
diac pacemaker or an implantable cardioverter defibrillator must not enter the vehicle compartment
(including luggage room) during normal charge operation.
G
Precaution at telematics system operation
WARNING:
• If a technician uses implantable cardiac pacemaker or implantable cardioverter defibrillator (ICD), H
avoid the device implanted part from approaching within approximately 220 mm (8.66 in) from inte-
rior/exterior antenna.
• The electromagnetic wave of TCU might affect the function of the implantable cardiac pacemaker or
the implantable cardioverter defibrillator (ICD), when using the service, etc. I
• If a technician uses other medical electric devices than implantable cardiac pacemaker or implant-
able cardioverter defibrillator(ICD), the electromagnetic wave of TCU might affect the function of the
device. The possible effects on the devices must be checked with the device manufacturer before J
TCU use.
Precaution at intelligent key system operation
WARNING: K
• If a technician uses implantable cardiac pacemaker or implantable cardioverter defibrillator (ICD),
avoid the device implanted part from approaching within approximately 220 mm (8.66 in) from inte-
rior/exterior antenna. VSP
• The electromagnetic wave of intelligent key might affect the function of the implantable cardiac
pacemaker or the implantable cardioverter defibrillator (ICD), at door operation, at each request
switch operation, or at engine starting.
• If a technician uses other medical electric devices than implantable cardiac pacemaker or implant- M
able cardioverter defibrillator (ICD), the electromagnetic wave of intelligent key might affect the func-
tion of the device. The possible effects on the devices must be checked with the device
manufacturer before intelligent key use. N
Point to Be Checked Before Starting Maintenance Work INFOID:0000000007079453
The high voltage system may starts automatically. It is required to check that the timer air conditioner O
and timer charge (during EVSE connection) are not set before starting maintenance work.
NOTE:
If the timer air conditioner or timer charge (during EVSE connection) is set, the high voltage system starts
P
automatically even when the power switch is in OFF state.
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT
PRE-TENSIONER" INFOID:0000000006932747
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain

PRECAUTIONS
< PRECAUTION >
types of collision. Information necessary to service the system safely is included in the “SRS AIR BAG” and
“SEAT BELT” of this Service Manual.
The vehicle may be equipped with a passenger air bag deactivation switch. Because no rear seat exists where
a rear-facing child restraint can be placed, the switch is designed to turn off the passenger air bag so that a
rear-facing child restraint can be used in the front passenger seat. The switch is located in the center of the
instrument panel, near the ashtray. When the switch is turned to the ON position, the passenger air bag is
enabled and could inflate for certain types of collision. When the switch is turned to the OFF position, the pas-
senger air bag is disabled and will not inflate. A passenger air bag OFF indicator on the instrument panel lights
up when the passenger air bag is switched OFF. The driver air bag always remains enabled and is not affected
by the passenger air bag deactivation switch.
WARNING:
Always observe the following items for preventing accidental activation.
• To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in
the event of a collision that would result in air bag inflation, all maintenance must be performed by
an authorized NISSAN/INFINITI dealer.
• Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal
injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag
Module, see the “SRS AIR BAG”.
• Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or har-
ness connectors.
• The vehicle may be equipped with a passenger air bag deactivation switch which can be operated by
the customer. When the passenger air bag is switched OFF, the passenger air bag is disabled and
will not inflate. When the passenger air bag is switched ON, the passenger air bag is enabled and
could inflate for certain types of collision. After SRS maintenance or repair, make sure the passenger
air bag deactivation switch is in the same position (ON or OFF) as when the vehicle arrived for ser-
vice.
PRECAUTIONS WHEN USING POWER TOOLS (AIR OR ELECTRIC) AND HAMMERS
WARNING:
Always observe the following items for preventing accidental activation.
• When working near the Air Bag Diagnosis Sensor Unit or other Air Bag System sensors with the
ignition ON or engine running, DO NOT use air or electric power tools or strike near the sensor(s)
with a hammer. Heavy vibration could activate the sensor(s) and deploy the air bag(s), possibly
causing serious injury.
• When using air or electric power tools or hammers, always switch the ignition OFF, disconnect the
battery, and wait at least 3 minutes before performing any service.
Precaution for Removing 12V Battery INFOID:0000000006932749
When removing the 12V battery, turn ON/OFF the power switch and check that the charging status indicator
does not blink. The 12V battery must be removed within one hour after checking the indicator lamp.
NOTE:
• The automatic 12V battery charge control may start even when the power switch is in OFF state.
• The automatic 12V battery charge control does not start within approximately one hour when the power
switch is turned ON/OFF.

PREPARATION
< PREPARATION >
PREPARATION A
PREPARATION
Commercial Service Tools INFOID:0000000006959896
B
Tool name Description

C
D
Power tool Loosening screws
E
PBIC0191E
VSP

COMPONENT PARTS
< SYSTEM DESCRIPTION >
SYSTEM DESCRIPTION
COMPONENT PARTS
Component Parts Location INFOID:0000000006959791
JSMIA0547ZZ
Instrument lower panel LH reverse

A. Left inside of front bumper B. Instrument lower panel LH C.
side
D. Inside glove box cover assembly

COMPONENT PARTS
Component Description A
Approaching vehicle sound for pe-
1. Refer to VSP-7, "Approaching Vehicle Sound For Pedestrians (VSP) Speaker".
destrians (VSP) speaker
• Transmits the following signals to the VSP control unit via the communication line. B
- READY to drive indicator lamp signal
- Power switch signal
- Vehicle speed signal
2. Combination meter - Sound set request signal C
- Sound signal
- Shift position signal
- Reverse warning buzzer signal
• Sets the sound type of the start up sound function.
D
3. Refer to VSP-8, "Approaching Vehicle Sound For Pedestrians (VSP) OFF Switch".
destrians (VSP) OFF switch
E
4. Refer to VSP-8, "Approaching Vehicle Sound For Pedestrians (VSP) OFF Indicator".
destrians (VSP) OFF indicator
5. Stop lamp switch Outputs the stop lamp switch signal to the VSP control unit.
F
6. Start up sound speaker Refer to VSP-7, "Start Up Sound Speaker".
7. Power switch Outputs the power switch signal to the VSP control unit.
Approaching vehicle sound for pe- G
8. Refer to VSP-8, "Approaching Vehicle Sound For Pedestrians (VSP) Control Unit".
destrians (VSP) control unit
Outputs the charge pulse signal to the VSP control unit.
9. VCM
Refer to EVC-14, "Component Parts Location" for detailed installation location. H
Approaching Vehicle Sound For Pedestrians (VSP) Speaker INFOID:0000000006959792
• The VSP speaker is located on the left inside of the front bumper. I
• The VSP speaker outputs the approaching vehicle sound for
pedestrians (VSP) and charge sound according to the VSP
speaker signal from the VSP control unit.
J
JSMIA0548ZZ VSP
Start Up Sound Speaker INFOID:0000000006959793
• The start up sound speaker is located on the reverse side of instru- M

ment lower panel LH.
• The start up sound speaker outputs the start up sound according
to the start up sound speaker signal from the VSP control unit. N
JSMIA0550ZZ
P

COMPONENT PARTS
Approaching Vehicle Sound For Pedestrians (VSP) Control Unit INFOID:0000000006959794
• The VSP control unit is located inside the glove box cover assem-
bly.
• The VSP control unit contains 2 power amplifiers for the VSP
speaker and start up sound speaker.
• The VSP control unit controls the following systems according to
the signals from the units and switches.
- VSP system
- Start up sound system
- Charging sound system
• When the VSP control unit judges that VSP system and charge
sound system operation is necessary, it outputs the VSP speaker
JSMIA0549ZZ
signal to the VSP speaker.
• When the VSP control unit judges that operation of the start up sound system is necessary, it outputs the
start up sound speaker signal to the start up sound speaker.
Approaching Vehicle Sound For Pedestrians (VSP) OFF Switch INFOID:0000000006959795
• The VSP OFF switch (1) is located on the instrument lower panel LH.
2. : VSP OFF indicator

• The VSP OFF switch can stop operation of the VSP system and
resume operation.
• The VSP OFF switch outputs the VSP OFF switch signal to the
VSP control unit.
JSMIA0551ZZ
Approaching Vehicle Sound For Pedestrians (VSP) OFF Indicator INFOID:0000000006959796
• The VSP OFF indicator (2) is located on the VSP OFF switch (1).
• The VSP OFF indicator turns ON and OFF according to the VSP
OFF indicator signal from the VSP control unit.
• The VSP OFF indicator is possible to check the operating status of
the VSP system.
VSP system status VSP OFF indicator

Operate OFF
Stopped ON
Error ON JSMIA0551ZZ

SYSTEM
SYSTEM
A
System Description INFOID:0000000006959797
SYSTEM DIAGRAM B
I
JSMIA0466GB
SYSTEM DESCRIPTION J
• The VSP control unit is connected to the parts listed below, and it controls each system according to the
input signals.
- Combination meter
K
- VCM
- VSP OFF switch
- VSP OFF indicator
- Power switch VSP
- Stop lamp switch
- VSP speaker
- Start up sound speaker M
• The combination meter sends the following signals to the VSP control unit via communication line.
- Vehicle speed signal N
- Sound set request signal
- Sound signal
- Shift position signal O
• The VSP control unit sends the following signals to the combination meter via communication line.
- Sound set signal P
- Sound signal
• The VCM outputs the charge pulse signal to the VSP control unit.
• The VSP control unit controls the following systems according to the signals from the units and switches.
- VSP system
- Start up sound system
- Charge sound system
• The VSP control unit has a diagnostic function. Diagnosis can be performed using CONSULT.

SYSTEM
Circuit Diagram INFOID:0000000006959798
JSMIA0706GB
Fail-Safe INFOID:0000000006959799
The VSP control unit performs fail-safe control when a communication error with the combination meter is
detected.
System Specifications
Function stops by communication disruption.
Start up sound system NOTE:
Operation sound of the power switch operates.

SYSTEM
A
VSP system Function stops by communication disruption.
Charge sound system Function operates.
START UP SOUND SYSTEM B
START UP SOUND SYSTEM : System Description INFOID:0000000006959800
C
SYSTEM DIAGRAM
F
JSMIA0467GB
SYSTEM DESCRIPTION
• The start up sound is a system that produces a sound that is linked with the power switch and with the G
READY to drive indicator lamp on the combination meter.
• The start up sound function consists of the following 2 types.
- Power switch operation sound when the power switch is operated. H
- READY effect sound that is linked to the READY to drive indicator lamp of the combination meter.
• A selection of 4 types (including OFF) of sound for the start up sound function is provided.
• The start up sound function sound types can be set using the combination meter.
I
POWER SWITCH OPERATION SOUND
The power switch operation sound is a function that operates when the power switch is pressed.
Operation Description J
• The VSP control unit uses the power switch signal from the power switch to determine the power switch
operation sound.
• When the VSP control unit inputs the power switch signal, the start up sound speaker signal is output to the
K
start up sound speaker.
Operation Condition
When the following conditions are met, the power switch operation sound operates. VSP
Operation condition
Power switch Pressed M
NOTE:
The power switch operation sound may not be able to respond normally if the power switch is pressed quickly.
N
Cancel Condition
The power switch operation sound stops when one of the following conditions is met.
• The power switch operation sound operation time is expired
• The READY effect sound operation condition is met O
• The VSP system operation condition is met
Signal Path
• The VSP control unit judges operation of the power switch operation sound function based on the signal P
shown below, and it operates the power switch operation sound.
Signal name SIgnal path
Power switch signal Power switch VSP control unit

SYSTEM
• When the VSP control unit judges that the power switch operation sound is necessary, it outputs the signal
shown below.
Start up sound speaker signal VSP control unit Start up sound speaker
Timing Chart
JSMIA0478GB
Description
1. The power switch operation sound operates when the power switch is pressed.
2. The power switch operation sound operation time is expired.
3. When VSP system operates, the power switch operation sound stops.
READY EFFECT SOUND

The READY effect sound is a function that operates through a link with the READY to drive indicator lamp of
the combination meter.
Operation Description
• The combination meter sends the READY to drive indicator lamp signal to the VSP control unit via the com-
munication line.
• The VSP control unit determines the READY effect sound using the READY to drive indicator lamp signal
from the combination meter.
• When the VSP control unit receives the READY to dive indicator lamp signal, the start up sound speaker sig-
nal is output to the start up sound speaker.
Operation Condition
When the following conditions are met, the READY effect sound operates.
Operation condition
READY to drive indicator lamp Turn OFF → Turn ON
Cancel Condition
When one of the following conditions is met, the READY effect sound operation stops.
Cancel condition
The READY effect sound operation time expires
READY to drive indicator lamp Turn OFF
Power switch OFF
VSP system Operate
Signal Path

SYSTEM
• The VSP control unit judges operation of the READY effect sound function based on the signal shown
below, and it operates the READY effect sound. A
Power switch signal

B
Power switch VSP control unit
READY to drive indicator lamp signal Combination meter VSP control unit
C
• When the VSP control unit judges that the READY effect sound is necessary, it outputs the signal shown
below.
D
Start up sound speaker signal VSP control unit Start up sound speaker
E
Timing Chart
JSMIA0479GB
K
Description
1. When the READY to drive indicator lamp turns ON, the READY effect sound operates.
2. The READY effect sound operation time ends. VSP
3. When the power switch is OFF, the READY effect sound operation stops.
4. When the READY to drive indicator lamp turns OFF, the READY effect sound operation stops.
M
5. When the VSP system operates, the READY effect sound operation stops.
APPROACHING VEHICLE SOUND FOR PEDESTRIANS(VSP) SYSTEM

N
APPROACHING VEHICLE SOUND FOR PEDESTRIANS(VSP) SYSTEM : System

SYSTEM
Description INFOID:0000000006959801
SYSYTEM DIAGRAM
JSMIA0469GB
SYSTEM DESCRIPTION
• The VSP system has the function of warning the driver of pedestrians approaching the vehicle, according to
signals received from the combination meter and the stop lamp switch
• The VSP system consists of the following 3 types.
- Driving start sound
- Driving sound
- Reverse sound
• The VSP system operating status can be checked from the VSP OFF indicator.
• The VSP system operation stop and stop release can be set using the VSP OFF switch.
• The VSP system begins operating when the power switch is turned from OFF to READY.
• The VSP OFF indicator turns ON when a malfunction occurs in the VSP system.
DRIVING START SOUND
The driving start sound operates when shift the selector lever to “D” position and the brake pedal is released
(when READY to drive indicator lamp ON).
• The combination meter sends the following signals to the VSP control unit via the communication line.
• The VSP control unit judges the driving start sound based on the signals input from the combination meter
and on the stop lamp switch signal input from the stop lamp switch.
• When the VSP control unit judges that the driving start sound is necessary, it outputs the VSP speaker signal
to the VSP speaker.
• The system switches to the driving sound after the driving start sound time ends.
Operation Condition
The driving start sound operates when all of the following conditions are met.
Operation condition
Selector lever “D” position
Vehicle speed 0 km/h (0 MPH)
READY to drive indicator
Turn ON
lamp
Brake pedal Released
Cancel Condition
The driving start sound operation stops when the following conditions is met.

SYSTEM
Cancel condition A
Reverse sound ON
NOTE: B
The system switches to the driving sound after the driving start sound time ends.
Signal Path
• The VSP control unit judges operation of the driving start sound function based on the signal shown below, C
and it operates the driving start sound.
Signal name Signal path

D
Shift position signal
Vehicle speed signal Combination meter VSP control unit
READY to drive indicator lamp signal E
Stop lamp switch signal Stop lamp switch VSP control unit
• When the VSP control unit judges that the driving start sound is necessary, it outputs the signal shown F
below.
Signal name SIgnal path G

VSP speaker signal VSP control unit VSP speaker
H
Timing Chart
VSP
M
JSMIA0480GB
Description N
1. The driving start sound operates when shift the selector lever to “D” position and the brake pedal is released.
2. If the selector lever is moved to a position “R”, the driving sound stops.
O
3. The system switches to the driving sound after the driving start sound time ends.
DRIVING SOUND
• The driving sound is a function that operates according to the vehicle speed. P
• The driving sound tone frequency changes in accordance with the vehicle speed.
• The combination meter sends the following signals to the VSP control unit via the communication line.
• The VSP control unit judges the driving sound based on the signals input from the combination meter.

SYSTEM
• When the VSP control unit judges that the driving sound is necessary, it outputs the VSP speaker signal to
the VSP speaker.
Operation Condition
The driving sound operates when the following conditions are met.
Operation condition
Accel-
1 km/h (0.6 MPH) or more
erating
Vehicle speed
Decel-
25 km/h (16 MPH) or less
erating
READY to drive indicator lamp Turn ON
Selector lever “D” position
Cancel Condition
The driving sound operation stops when the following conditions are met.
Cancel condition
Accel-
30 km/h (19 MPH) or more
erating
Vehicle speed
Decel-
Less than 1 km/h (0.6 MPH)
erating
READY to drive indicator lamp Turn OFF
Signal Path
• The VSP control unit judges operation of the driving sound function based on the signals shown below, and
it operates the driving sound.

Vehicle speed signal
Combination meter VSP control unit
READY to dive indicator lamp signal
• When the VSP control unit judges that the driving sound is necessary, it outputs the signal shown below.
Timing Chart
JSMIA0470GB

SYSTEM
Operation contents A
1. The driving sound operates up to approximately 30 km/h (19 MPH) while accelerating.
2. The driving sound stops when approximately 30 km/h (19 MPH) is reached.
3. The driving sound operates when the speed falls to approximately 25 km/h (16 MPH) or less while decelerating.
B
4. The driving sound stops while the vehicle stops (fades out and stops).
REVERSE SOUND C
The reverse sound operates when shift the selector lever to “R” position.
• The combination meter sends the following signals to the VSP control unit via the communication line. D
- READY to drive indicator lamp signal E
• The VSP control unit judges the reverse sound based on the signals input from the combination meter.
• When the VSP control unit judges that the reverse sound is necessary, it outputs the VSP speaker signal to
the VSP speaker.
F
Operation Condition
The reverse sound operates when the following conditions are met.
G
Operation condition
Selector lever “R” position
READY to drive indicator H
Turn ON
lamp
Cancel Condition
I
The reverse sound operation stops when the following conditions are met.
Operation condition J
Selector lever Other than “R” position
Signal Path
• The VSP control unit judges operation of the reverse sound based on the signals shown below, and oper- K
ates the driving sound.
Signal name Signal path VSP

Shift position signal
Combination meter VSP control unit
Reverse warning buzzer signal
M
• When the VSP control unit judges that the reverse sound is necessary, it outputs the signal shown below.

N

SYSTEM
Timing Chart
JSMIA0617GB
Operation contents
1. The reverse sound operates when shift the selector lever to “R” position.
2. The reverse sound stops when shift the selector lever to other than “R” position.
VSP SYSTEM OPERATION STOP AND RESUME FUNCTION

• The VSP system can be set to stop operating or to resume operating by means of the VSP OFF switch.
• The VSP system begins operating when the power switch is turned from OFF to READY.
• The VSP OFF indicator turns off when the VSP system is stopped.
VSP system status VSP OFF indicator

Operation status Turn OFF
Operation stopped Turn ON
• The VSP OFF switch outputs the VSP OFF switch signal to the VSP control unit.
• The VSP control unit judges VSP system operation stop and operation resume according to the VSP OFF
switch signal.
• The VSP control unit outputs the VSP OFF indicator signal to the VSP OFF switch.
Stopping VSP System Operation
• Press the VSP OFF switch.
• Check that the VSP OFF indicator is turned ON.
Cancelling VSP System Operation Stop
• Press the VSP OFF switch.
• Check that the VSP OFF indicator is turned OFF.
NOTE:
Even if VSP system operation was stopped when the power switch was turned OFF, the VSP system begins
operating when the power switch is next turned from OFF to READY.
Signal Path
• The VSP control unit judges VSP system operation stop and operation resume according to the signal
shown below.
VSP OFF switch signal VSP OFF switch VSP control unit
• The VSP OFF switch turns the VSP OFF indicator ON/OFF according to the signal shown below.

SYSTEM
Signal name Signal path A

VSP OFF indicator signal VSP control unit VSP OFF switch
B
VSP SYSTEM MALFUNCTION DETECTION FUNCTION
When a malfunction in the VSP system is detected, the VSP OFF indicator turns ON.
Signal Path C
• When the VSP control unit detects a VSP system malfunction, it outputs the VSP OFF indicator signal to the
VSP OFF switch.
• The VSP OFF switch turns the VSP OFF indicator ON/OFF when the signal shown below is input.
D
VSP OFF indicator signal VSP control unit VSP OFF switch E
CHARGE SOUND SYSTEM

F
CHARGE SOUND SYSTEM : System Description INFOID:0000000006959802
SYSTEM DIAGRAM
G
JSMIA0471GB
J
SYSTEM DESCRIPTION
• The charge sound system is a function that notifies of the charge connector status and the charge accep-
tance status. K
• The charge sound system operates when the power switch is OFF.
• The charge sound system consists of the following 2 types and operates through a link with the charging sta-
tus indicator.
- Plug-in detection sound. VSP
- Charge acceptance sound.
PLUG-IN DETECTION SOUND
• The plug-in detection sound notifies that the charge connector is engaged normally. M
• During quick charge, the plug-in detection sound does not operate.
N
• The VSP control unit determines the plug-in detection sound using the charge pulse signal (2 pulse) from the
VCM.
• When the VSP control unit inputs the charge pulse signal (2 pulse), the VSP speaker signal is outputs to the O
VSP speaker.
Operation Condition
The plug-in detection sound operates when all of the following conditions are met. P
Operation condition
Power switch OFF
Charge connector Normal connection
CHARGE ACCEPTANCE SOUND

SYSTEM
The charge acceptance sound notifies that the charge is accepted.
• The VSP control unit determines the charge acceptance sound using the charge pulse signal (3 pulse) from
the VCM.
• When the VSP control unit inputs the charge pulse signal (3 pulse), the VSP speaker signal is outputs to the
VSP speaker.
Operation Condition
The charge acceptance sound operates when all of the following conditions are met.
Operation condition
Power switch OFF
Charge When charge is accepted
Signal Path
• The VSP control unit uses the signal shown below to judge the plug-in detection sound function and charge
acceptance sound function, and it activates the plug-in detection sound and charge acceptance sound.
Charge pulse signal VCM VSP control unit
• When the VSP control unit judges that the plug-in detection sound and charge acceptance sound are neces-
sary, it outputs the signal shown below.
TIMING CHART
JSMIA0481GB
Description
1. When the charge connector normally, the plug-in detection sound operates (when the charge pulse signal (2 pulse) is input).
2. When charging is accepted, the charge acceptance sound operates (when the charge pulse signal (3 pulse) is input).

DIAGNOSIS SYSTEM (VSP)
A
CONSULT Function INFOID:0000000006959803
APPLICATION ITEM B
CONSULT can display each diagnostic item using the diagnostic test modes shown as per the following:
Test mode Function C

Approaching vehicle sound for pedestrian control unit checks the conditions and displays
Self Diagnostic Results
memorized error.
Data Monitor Approaching vehicle sound for pedestrian control unit input/output data in real time. D
Active Test Gives a drive signal to a load to check the operation.
SELF-DIAGNOSTIC RESULTS E
For details, refer to VSP-26, "DTC Index".
DATA MONITOR
F
Monitor item Display Description

On G
IGNITION SW Power switch status input from the power switch supply.
Off
On
BRAKE SW Stop lamp switch status input from the stop lamp switch. H
Off
On
VSP OFF SW VSP OFF switch status input from the VSP OFF switch.
Off
I
On
PUSH SW Power switch status input from the power switch.
Off
Hi J
VCM INPUT SIG Charge connector status input from the VCM.
Lo
On READY to drive indicator lamp status input from the combination meter via the communi-
READY OP IND SIG K
Off cation line.
On
IGN STATS SIG Power switch status input from the combination meter via the communication line.
Off VSP
Vehicle speed signal value input from the combination meter via the communication line.
VEHCLE SPEED 0 - 63 km/h NOTE:
63 km/h (39.1 MPH) or faster is fixed at 63 km/h (39.1 MPH). M
ENG STATUS SIG Off This item is displayed, but cannot be monitored.
On Start up sound setting requirement status display input from the combination meter via the
SOUND SET REQ
Off communication line. N
1
2
SOUND Start up sound setting display input from the combination meter via the communication line. O
3
4
P or N P
SHIFT POS SIG R The shift position status input from the combination meter via the communication line.
D or B
On Reverse warning buzzer status input from the combination meter via the communication
REVERSE BUZZER
Off line.
ACTIVE TEST

Active test item Function

The VSP speaker operation can be checked.
NOTE:
VSP SPEAKER
Activates the reverse sound at a higher sound level than normal operation.
The start up sound speaker operation can be checked.

START UP SOUND SPEAKER NOTE:
Activates the reverse sound at a higher sound level than normal operation.
The VSP OFF indicator operation can be checked.
VSP IND NOTE:
The VSP OFF indicator flashes (1 Hz).

APPROACHING VEHICLE SOUND FOR PEDESTRIANS (VSP) CONTROL UNIT
< ECU DIAGNOSIS INFORMATION >
ECU DIAGNOSIS INFORMATION A
APPROACHING VEHICLE SOUND FOR PEDESTRIANS (VSP) CONTROL
UNIT
B
Reference Value INFOID:0000000006959804
VALUES ON THE DIAGNOSIS TOOL C

CONSULT MONITOR ITEM
Monitor item Condition Value/Status
D
Power switch Power switch READY position On
IGNITION SW
ON Power switch other than READY position Off
When brake pedal is depressed (stop lamp switch OFF) On E
Power switch
BRAKE SW When brake pedal is not depressed (stop lamp switch
ON Off
ON)
Power switch When VSP OFF switch is pressed On F

VSP OFF SW
ON When VSP OFF switch is not pressed Off
Power switch When power switch is pressed On

PUSH SW G
ON When power switch is not pressed Off
Power switch Charge connector connected Hi

VCM INPUT SIG
ON Charge connector not connected Low H
Power switch READY to drive indicator lamp ON On
READY OP IND SIG
ON READY to drive indicator lamp OFF Off
Power switch READY position On I
Power switch
IGN STATUS SIG
ON Power switch other than READY position Off
Approximately equal to J
speedometer reading
Power switch NOTE:
VEHICLE SPEED While driving
ON Indicates 63 km/h (39.1
MPH) when speed is 63 K
km/h (39.1 MPH) or higher.
NOTE:
Power switch
ENG STATUS SIG This item is displayed, but cannot be monitored. Off
ON VSP
Power switch Start up sound type was set. On

SOUND SET REQ
ON Other than the above Off M
Start up sound setting is “1”. 1
Power switch Start up sound setting is “2”. 2

SOUND
ON Start up sound setting is “3”. 3 N
Start up sound setting is “OFF”. 4
Selector lever is in “P” or “N” position. P or N
SHIFT POSITION SIG- Power switch
O
Selector lever is in “R” position. R
NAL ON
Selector lever is in “D” position. D or B
Power switch Reverse warning buzzer operating On P

REVERSE BUZZER
ON Reverse warning buzzer not operating Off

TERMINAL LAYOUT
JSOIA0213ZZ
PHYSICAL VALUES
Terminal No.
Description
(Wire color) Value
Condition
Input/ (Approx.)
+ – Signal name
Output
Power
1
Ground Ground — switch — 0V
(B)
ON
NOTE:
Waveform shows reference val-
ues.
Power
2 Communication signal
Ground Input switch —
(LG) (Meter → VSP)
ON
JSMIA0536GB
0 - 12 V
When power switch is
Power 0V
3 pressed
Ground Power switch signal Input switch
(SB) When power switch is not
ON 12 V
pressed
NOTE:
Waveform shows reference val-
ues.
Power
4 Communication signal
Ground Output switch —
(P) (VSP → Meter)
ON
JSMIA0537GB
0 - 12 V
When VSP OFF switch is
Power 0V
5 pressed
Ground VSP OFF switch signal Input switch
(G) When VSP OFF switch is
ON 12 V
not pressed

Terminal No.
Description
(Wire color) Value A
Condition
Input/ (Approx.)
+ – Signal name
Output
B
When charge connector is C

connected
JSMIA0565GB D
Power
6
Ground Charge pules signal Input switch
(Y)
ON
E
• Power switch is OFF
• Charge is accepted.
F
JSMIA0566GB
Other than the above 0V

G
NOTE:
Waveform varies depending on
tone and sound level.
H
Power
8 7 When VSP speaker is out-
VSP speaker signal Output switch
(Y) (L) put.
ON
I
JSMIA0539GB
J
10
— K- line (CONSULT) — — — —
(GR)
Power
11 K
Ground Power switch supply Input switch — Battery voltage
(R)
ON
When brake pedal is not
Power 0V
12 depressed VSP
Ground Stop lamp switch signal Input switch
(SB) When the brake pedal is
ON 12 V
depressed
Power M
13
Ground Battery power supply Input switch — Battery voltage
(L)
OFF
Power VSP OFF indicator is ON. 0V N
14
Ground VSP OFF indicator signal Output switch
(LG) VSP OFF indicator is OFF. 12 V
ON
NOTE:
Waveform varies depending on
O
tone and sound level.
Power
15 16 Start up sound speaker
Output switch
When start up sound P
(R) (W) signal speaker is output.
ON
JSMIA0564GB

Fail-Safe INFOID:0000000006959805
The VSP control unit performs fail-safe control when a communication error with the combination meter is
detected.
Function stops by communication disruption.
Start up sound system NOTE:
Operation sound of the power switch operates.
VSP system Function stops by communication disruption.
Charge sound system Function operates.
DTC Index INFOID:0000000006959806
Display item
Malfunction is detected when... Reference
[Code]
COMM CIRCUIT Communications signal from combination meter could not be received
VSP-33
[U1431] continuously for 2 seconds or more (when power switch ON or READY).

APPROACHING VEHICLE SOUND FOR PEDESTRIANS (VSP) SYSTEM
< WIRING DIAGRAM >
WIRING DIAGRAM A
Wiring Diagram INFOID:0000000006959807
B
VSP
JCMWA6912GB

< WIRING DIAGRAM >
JCMWA6913GB

< WIRING DIAGRAM >
VSP
JCMWA6914GB

< WIRING DIAGRAM >
JCMWA6915GB

DIAGNOSIS AND REPAIR WORKFLOW
< BASIC INSPECTION >
BASIC INSPECTION A
Work Flow INFOID:0000000006959808
B
OVERALL SEQUENCE
C
K
JSMIA0553GB
Reference 1···VSP-26, "DTC Index".
VSP
DETAILED FLOW
1.OBTAIN INFORMATION ABOUT SYMPTOM
Interview the customer to obtain as much information as possible about the conditions and environment under M
which the malfunction occurred.
>> GO TO 2. N
2.CHECK SYMPTOM
• Check the symptom based on the information obtained from the customer. O
• Check if any other malfunctions are present.
>> GO TO 3. P
3.CHECK CONSULT SELF-DIAGNOSIS RESULTS
Connect CONSULT and perform self-diagnosis. Refer to VSP-26, "DTC Index".
Are self-diagnosis results normal?
YES >> GO TO 5.
NO >> GO TO 4.

< BASIC INSPECTION >
4.NARROW DOWN MALFUNCTIONING PARTS BY SYMPTOM DIAGNOSIS
Perform symptom diagnosis and narrow down the malfunctioning parts.
>> GO TO 5.
5.REPAIR OR REPLACE MALFUNCTIONING PARTS
Repair or replace malfunctioning parts.
NOTE:
If DTC is displayed, erase DTC after repairing or replacing malfunctioning parts.
>> GO TO 6.
6.FINAL CHECK
Check that the VSP system operates normally.
Does it operate normally?
YES >> INSPECTION END
NO >> GO TO 1.

U1431 COMM CIRCUIT
< DTC/CIRCUIT DIAGNOSIS >
DTC/CIRCUIT DIAGNOSIS A
U1431 COMM CIRCUIT
B
The communications line (METER →VSP) sends signals needed for VSP system control from the combina-
tion meter.
C
DTC Logic INFOID:0000000006959810
DTC DETECTION LOGIC D
Display contents of CON-

DTC Diagnostic item is detected when... Probable malfunction location
SULT E
Communications signal from combination meter
Communication line (METER →
U1431 COMM CIRCUIT could not be received continuously for 2 seconds or
VSP)
more (power switch ON or READY).
F
Diagnosis Procedure INFOID:0000000006959811
1.CHECK COMMUNICATION LINE (METER → VSP) SIGNAL CIRCUT G

1. Power switch OFF
2. Disconnect VSP control unit and combination meter connector.
3. Check continuity between VSP control unit harness connector and combination meter harness connector. H
VSP control unit Combination meter

Continuity I
Connector Terminal Connector Terminal
M47 2 M34 10 Existed
4. Check continuity between VSP control unit harness connector and ground. J
VSP control unit

Continuity
Connector Terminal Ground K
M47 2 Not existed
Is the inspection result normal?
VSP
YES >> GO TO 2.
NO >> Repair harness or connector.
2.CHECK COMMUNICATION LINE (METER → VSP) INPUT SIGNAL M
1. Connect VSP control unit and combination meter connector.
2. Power switch ON.
3. Check voltage between VSP control unit harness connector and ground. N
Terminal
(+) Voltage
O
VSP control unit (-) (Approx.)
Connector Terminal
P

U1431 COMM CIRCUIT
NOTE:
Waveform shows reference values.
M47 2 Ground
JSMIA0536GB
0 - 12 V
NO >> Replace combination meter. Refer to MWI-89, "Removal and Installation".

POWER SUPPLY AND GROUND CIRCUIT
POWER SUPPLY AND GROUND CIRCUIT
A
APPROACHING VEHICLE SOUND FOR PEDESTRIANS (VSP) CONTROL UNIT :
B
1.CHECK FUSE C
Check for blown fuses.
Power source Fuse No.

D
Battery power supply 11
Power switch ON 5
Is the inspection result normal? E
YES >> GO TO 2.
NO >> Be sure to eliminate cause of malfunction before installing new fuse.
2.CHECK POWER SUPPLY CIRCUIT F
1. Power switch ON.

2. Check voltage between VSP control unit harness connector and ground.
G
Signal name Connector No. Terminal No. Power switch position Value (Approx.)
Battery power supply 13 OFF Battery voltage
M47 H
Power switch ON signal 11 ON Battery voltage
YES >> GO TO 3. I
NO >> Repair or replace VSP control unit power supply harness.
3.CHECK GROUND CIRCUIT
J
1. Power switch OFF.
2. Disconnect VSP control unit connector.
3. Check continuity between VSP control unit harness connector and ground.
K
VSP control unit
Continuity
Connector Terminal Ground
VSP
M47 1 Existed
YES >> INSPECTION END M
NO >> Repair or replace VSP control unit ground harness.

APPROACHING VEHICLE SOUND FOR PEDESTRIANS (VSP) SPEAKER SIG-
NAL CIRCUIT
APPROACHING VEHICLE SOUND FOR PEDESTRIANS (VSP) SPEAKER
SIGNAL CIRCUIT
The VSP control unit outputs the VSP speaker signal to the VSP speaker.
Component Function Check INFOID:0000000006959814
1.CHECK VSP SPEAKER OPERATION

1. Connect the COUNSULT.
2. Select the “ACTIVE TEST” for the “VSP”and perform the “VSP SPEAKER”.
>> INSPECTION END

1.CHECK VSP SPEAKER SIGNAL CIRCUT

2. Disconnect VSP control unit and VSP speaker connector.
3. Check continuity between VSP control unit harness connector and VSP speaker harness connector.
VSP control unit VSP speaker

Continuity
7 2
M47 E42 Existed
8 1
VSP control unit

Continuity
Connector Terminal
Ground
7
M47 Not existed
8
YES >> GO TO 2.
2.CHECK VSP SPEAKER OUTPUT SIGNAL
1. Connect VSP control unit and VSP speaker connector.
2. Power switch ON.
3. Check signal between VSP control unit harness connector.

APPROACHING VEHICLE SOUND FOR PEDESTRIANS (VSP) SPEAKER SIG-
NAL CIRCUIT
Terminals A
(+) (-) Voltage
VSP control unit (Approx.)
B
NOTE:
Waveform varies depending on tone and sound
C
level.
M47 8 M47 7
D
E
JSMIA0539GB

YES >> INSPECTION END F
NO >> Replace VSP control unit. Refer to VSP-61, "Removal and Installation".
VSP

START UP SOUND SPEAKER SIGNAL CIRCUIT
The VSP control unit outputs the start up sound speaker signal to the start up sound speaker.
1.CHECK START UP SOUND SPEAKER OPERATION

1. Connect the COUNSULT.
2. Select the “ACTIVE TEST” for the “VSP”and perform the “START UP SOUND SPEAKER”.
>> INSPECTION END

1.CHECK START UP SOUND SPEAKER SIGNAL CIRCUT

2. Disconnect VSP control unit and start up sound speaker connector.
3. Check continuity between VSP control unit harness connector and start up sound speaker harness con-
nector.
VSP control unit Start up sound speaker

Continuity
15 2
M47 M48 Existed
16 1
VSP control unit

Continuity
Connector Terminal
Ground
15
M47 Not existed
16
YES >> GO TO 2.
2.CHECK START UP SOUND SPEAKER OUTPUT SIGNAL
1. Connect VSP control unit and start up sound speaker connector.
2. Power switch ON.
3. Check signal between VSP control unit harness connector.

Terminals A
(+) (-) Voltage
VSP control unit (Approx.)
B
NOTE:
Waveform varies depending on tone and sound
C
level.
M47 16 M47 15
D
E
JSMIA0564GB

YES >> INSPECTION END F
NO >> Replace VSP control unit. Refer to VSP-61, "Removal and Installation".
VSP

APPROACHING VEHICLE SOUND FOR PEDESTRIANS (VSP) OFF SWITCH
SIGNAL CIRCUIT
APPROACHING VEHICLE SOUND FOR PEDESTRIANS (VSP) OFF
SWITCH SIGNAL CIRCUIT
The VSP OFF switch outputs the VSP OFF switch signal to the VSP control unit.
1.CKECK VSP OFF SWITCH INPUT SIGNAL CIRCUIT

1. Connect the CONSULT.
2. Select the “DATA MONITOR” for the “VSP” and check the “VSP OFF SW” monitor value.
“VSP OFF SW”

When VSP OFF switch is pressed : On
When VSP OFF switch is not pressed : Off
>> INSPECTION END

1.CHECK VSP OFF SWITCH SIGNAL CIRCUIT

2. Disconnect VSP control unit and VSP OFF switch connector.
3. Check continuity between VSP control unit harness connector and VSP OFF switch harness connector.
VSP control unit VSP OFF SW

Continuity
M47 5 M46 7 Existed
VSP control unit

Continuity
M47 5 Not existed
5. Check continuity between VSP OFF switch harness connector and ground.
VSP OFF SW
Continuity
M46 6 Existed
YES >> GO TO 2.
2.CHECK VSP OFF SWITCH INPUT SIGNAL
1. Connect VSP control unit and VSP OFF switch connector.
2. Power switch ON.
Terminal
(+) Voltage
Condition
Connector Terminal

SIGNAL CIRCUIT
When VSP OFF switch is
0V
pressed A
M47 5 Ground
When VSP OFF switch is not
12 V
pressed
Is the inspection result normal? B
YES >> Replace VSP control unit. Refer to VSP-61, "Removal and Installation".
NO >> Refer to VSP-41, "Component Inspection".
C
Component Inspection INFOID:0000000006959822
1.CHECK VSP OFF SWITCH D

2. Disconnect VSP OFF switch connector.
3. Check continuity between following terminals of the VSP OFF switch. E
Terminals Condition Continuity

When VSP OFF switch is pressed Existed F
6 7
When VSP OFF switch is not pressed Not existed
G
NO >> Replace VSP OFF switch. Refer to VSP-62, "Removal and Installation".
VSP

APPROACHING VEHICLE SOUND FOR PEDESTRIANS (VSP) OFF INDICATOR
SIGNAL CIRCUIT
APPROACHING VEHICLE SOUND FOR PEDESTRIANS (VSP) OFF INDI-
CATOR SIGNAL CIRCUIT
The VSP OFF indicator turns ON and OFF according to the VSP OFF indicator signal from the VSP control
unit.
1.CHECK VSP OFF INDICATOR POWER SUPPLY CIRCUIT

2. Disconnect VSP OFF switch connector.
3. Power switch ON.
4. Check voltage between VSP OFF switch connector and ground.
Terminals
(+) Voltage
VSP OFF switch (-) (Approx.)
Connector Terminal
M46 3 Ground 12 V
YES >> GO TO 2.
NO >> Check harness between fuse and VSP OFF switch.
2.CHECK VSP OFF INDICATOR SIGNAL CIRCUIT
3. Check continuity between the VSP control unit harness connector and the VSP OFF switch harness con-
nector.
VSP control unit VSP OFF SW

Continuity
M47 14 M46 2 Existed
VSP control unit

Continuity
M47 14 Not existed
YES >> GO TO 3.
NO >> Repair the harnesses or connector.
3.CHECK VSP OFF INDICATOR OUTPUT SIGNAL
1. Connect VSP control unit and VSP OFF switch connector.
2. Power switch ON.
Terminals
(+) Voltage
Condition
Connector Terminal

APPROACHING VEHICLE SOUND FOR PEDESTRIANS (VSP) OFF INDICATOR
SIGNAL CIRCUIT
VSP system operating 12 V
M47 14 Ground A
VSP system stopped 0V
NOTE:
Check whether or not the voltage changes when the VSP off switch is operated.
B
YES >> Replace the VSP OFF switch. Refer to VSP-62, "Removal and Installation".
NO >> Replace the VSP control unit. Refer to VSP-59, "Removal and Installation". C
VSP

STOP LAMP SWITCH SIGNAL CIRCUIT
The Stop lamp switch outputs the stop lamp switch signal to the VSP control unit.
1.CHECK STOP LAMP SWITCH INPUT SIGNAL

2. Select the “DATA MONITOR” for the “VSP” and check the “BRAKE SW” monitor value.
“BRAKE SW”
When brake pedal is not depressed : Off
When brake pedal is depressed : On
>> INSPECTION END

1.STOP LAMP SWITCH POWER SUPPLY CIRCUIT

2. Disconnect stop lamp switch connector.
3. Power switch ON.
4. Check voltage between stop lamp switch harness connector and ground.
Terminal
(+) Voltage
Stop lamp SW (–) (Approx.)
Connector Terminal
E102 1 Ground 12 V
YES >> GO TO 2.
NO >> Check harness between fuse and stop lamp switch.
2.CHECK STOP LAMP SWITCH SIGNAL CIRCUIT
3. Check continuity between VSP control unit harness connector and stop lamp switch harness connector.
VSP control unit Stop lamp SW

Continuity
M47 12 E102 2 Existed
VSP control unit

Continuity
M47 12 Not existed
YES >> GO TO 3.
3.CHECK STOP LAMP SWITCH INPUT SIGNAL
1. Connect VSP control unit and stop lamp switch connector.
2. Power switch ON. A
Terminals B
(+) Voltage
Condition
C
Connector Terminal
When brake pedal is depressed 12 V
M47 12 Ground When brake pedal is not de-
0V D
pressed
YES >> Replace the VSP control unit. Refer to VSP-59, "Removal and Installation". E
Component Inspection INFOID:0000000006959828
F
1.CHECK STOP LAMP SWITCH
2. Disconnect stop lamp switch connector. G
3. Check continuity between following terminals of the stop lamp switch.

H
When brake pedal is depressed Existed

1 2
When brake pedal is not depressed Not existed
I
NO >> Replace stop lamp switch. J
VSP

CHARGE PULSE SIGNAL CIRCUIT
The VCM outputs the charge pulse signal to the VSP control unit.
1.CHECK CHARGE PULSE INPUT SIGNAL

2. Select the “DATA MONITOR” for the “VSP” and check the “VCM IN SIG” monitor value.
“VCM IN SIG”
When charge connector is connected : Hi
When charge connector is not connected : Lo
>> INSPECTION END

1.CHECK CHARGE PULSE SIGNAL CIRCUIT

2. Disconnect VSP control unit connector and VCM connector.
3. Check continuity between VSP control unit harness connector and VCM harness connector.
VSP control unit VCM

Continuity
M47 6 E63 88 Existed
VSP control unit

Continuity
M47 6 Not existed
YES >> GO TO 2.
1. Connect VSP control unit and stop lamp switch connector.
2. Power switch ON.
Terminals
(+) Voltage
Condition
Connector Terminal

When charge connector con-

nected
B
JSMIA0565GB
C
M47 6 Ground
• When power switch OFF D

• When charge is accepted
E
JSMIA0566GB
Other than the above 0V

Is the inspection result normal? F
YES >> Replace the VSP control unit. Refer to VSP-59, "Removal and Installation".
NO >> Perform “Self Diagnosis Result” of VCM.
G
VSP

POWER SWITCH SIGNAL CIRCUIT
The power switch outputs the power switch signal to the VSP control unit.
1.CHECK POWER SWITCH INPUT SIGNAL

2. Select the “DATA MONITOR” for the “VSP” and check the “PUSH SW” monitor value.
“PUSH SW”
When power switch is pressed : On
When power switch is not pressed : Off
>> INSPECTION END

1.CHECK POWER SWITCH SIGNAL CIRCUIT

2. Disconnect VSP control unit and power switch connector.
3. Check continuity between VSP control unit harness connector and power switch harness connector.
VSP control unit Power SW

Continuity
M47 3 M25 8 Existed
VSP control unit

Continuity
M47 3 Not existed
5. Check continuity between power switch harness connector and ground.
Power SW
Continuity
M25 4 Existed
YES >> GO TO 2.
2.CHECK POWER SWITCH INPUT SIGNAL
1. Connect VSP control unit and power switch connector.
2. Power switch ON.
Terminal
(+) Voltage
Condition
Connector Terminal

When power switch is pressed 0V
M47 3 Ground A
When power switch is not
12 V
pressed
B
YES >> Replace VSP control unit. Refer to VSP-61, "Removal and Installation".
Component Inspection INFOID:0000000006959835 C
1.CHECK POWER SWITCH

1. Power switch OFF. D
2. Disconnect power switch connector.
3. Check continuity between following terminals of the power switch.
E
When power switch is pressed Existed
8 4 F
When power switch is not pressed Not existed
YES >> INSPECTION END G
NO >> Replace power switch.
VSP

APPROACHING VEHICLE SOUND FOR PEDESTRIANS (VSP) SYSTEM SYMP-
TOMS
< SYMPTOM DIAGNOSIS >
SYMPTOM DIAGNOSIS
SYMPTOMS
Symptom Table INFOID:0000000006959836
Symptoms Check items Possible malfunction location/Action to take

• Input signals from combination
meter are normal. • VSP speaker
No sound from VSP speaker • VSP OFF SW operation is normal. • VSP speaker signal circuit
• VSP sound and charge sounds do Refer to VSP-54, "Diagnosis Procedure".
not sound.
• Input signals from combination
• Start up sound speaker
No sound from start up sound meter are normal.
• Start up sound speaker signal circuit
speaker • Power switch operation sound and
Refer to VSP-55, "Diagnosis Procedure".
READY effect sound do not sound.
Driving start sound does not Driving sound and reverse sound oper- Stop lamp switch signal circuit
sound. ate. Refer to VSP-53, "Diagnosis Procedure".
Power switch operation sound Power switch signal circuit
READY effect sound occurs.
does not sound. Refer to VSP-57, "Diagnosis Procedure".
Plug-in detection sound and charge ac- Charge pulse signal circuit
Charge sound does not sound.
ceptance sound do not sound. Refer to VSP-56, "Diagnosis Procedure"
VSP system operation cannot be VSP OFF switch signal circuit
—
stopped. Refer to VSP-52, "Diagnosis Procedure".
System operation stop and operation
VSP OFF indicator does not turn VSP OFF indicator signal circuit
resume are possible by operating the
ON or does not turn OFF. Refer to VSP-51, "Diagnosis Procedure".
VSP OFF switch.

THE APPROACHING VEHICLE SOUND FOR PEDESTRIANS (VSP) OFF INDICA-
TOR DOES NOT TURN ON OR OFF
THE APPROACHING VEHICLE SOUND FOR PEDESTRIANS (VSP) OFF
A
INDICATOR DOES NOT TURN ON OR OFF
B
• The VSP OFF indicator does not turn OFF even when VSP system is operating.
• The VSP OFF indicator does not turn ON even when VSP system is stopped.
C
1.CHECK VSP OFF INDICATOR SIGNAL CIRCUT

D
Check VSP OFF indicator signal circuit. Refer to VSP-42, "Diagnosis Procedure".
YES >> Replace VSP OFF switch. Refer to VSP-62, "Removal and Installation". E
VSP

THE APPROACHING VEHICLE SOUND FOR PEDESTRIANS (VSP) SYSTEM
CAN NOT BE CANCELED
THE APPROACHING VEHICLE SOUND FOR PEDESTRIANS (VSP) SYS-
TEM CAN NOT BE CANCELED
The VSP system operation does not stop even when the VSP OFF switch is pressed.
1.CHECK VSP OFF SWITCH INPUT SIGNAL

2. Check the VSP OFF switch input signal. Refer to VSP-40, "Component Function Check".
NO >> GO TO 2.
2.CHECK VSP OFF SWITCH SIGNAL CIRCUIT
Check the VSP OFF switch signal circuit. Refer to VSP-40, "Diagnosis Procedure".
YES >> GO TO 3.
3.CHECK VSP OFF SWITCH
Check the VSP OFF switch. Refer to VSP-41, "Component Inspection".
NO >> Replace the VSP OFF switch. Refer to VSP-62, "Removal and Installation".

THE DRIVING SOUND DOES NOT SOUND
THE DRIVING SOUND DOES NOT SOUND
A
The driving start sound does not operate when the selector lever is in the “D“ position and the brake pedal is B
released.
NOTE:
The driving sound and reverse sound operate.
C
1.CHECK STOP LAMP SWITCH INPUT SIGNAL D

2. Check the stop lamp switch input signal. Refer to VSP-44, "Component Function Check".
Is the inspection result normal? E
NO >> GO TO 2.
2.CHECK STOP LAMP SWITCH SIGNAL CIRCUIT F
Check the stop lamp switch signal circuit. Refer to VSP-44, "Diagnosis Procedure".
G
YES >> GO TO 3.
3.CHECK STIO LAMP SWITCH H
Check stop lamp switch. Refer to VSP-45, "Component Inspection".
YES >> Replace the VSP control unit. Refer to VSP-59, "Removal and Installation". I
NO >> Replace stop lamp switch.
VSP

THE APPROACHING VEHICLE SOUND FOR PEDESTRIANS (VSP) SPEAKER
DOES NOT SOUND
THE APPROACHING VEHICLE SOUND FOR PEDESTRIANS (VSP)
SPEAKER DOES NOT SOUND
The driving start sound, driving sound, reverse sound, and charge sound all do not operate.
NOTE:
The VSP OFF indicator operates normally.
1.CHECK VSP SPEAKER OPERATION

2. Select “VSP SP” of “ACTIVE TEST”
3. Check the VSP speaker operation. Refer to VSP-36, "Component Function Check".
NO >> GO TO 2.
2.CHECK VSP SPEAKER SIGNAL CIRCUIT
Check VSP speaker signal circuit. Refer to VSP-36, "Diagnosis Procedure".
YES >> Replace the VSP speaker. Refer to VSP-61, "Removal and Installation".

THE START UP SOUND SPEAKER DOES NOT SOUND
THE START UP SOUND SPEAKER DOES NOT SOUND
A
The start up sound do not sound. B

1.CHECK STRAT UP SOUND SPEAKER OPERATION C

2. Select “START UP SOUND SP” of “ACTIVE TEST”
3. Check the start up sound speaker operation. Refer to VSP-38, "Component Function Check". D
NO >> GO TO 2. E
2.CHECK START UP SOUND SPEAKER SINGAL CIRCUIT
Check start up sound signal circuit. Refer to VSP-38, "Diagnosis Procedure". F
YES >> Replace the start up sound speaker. Refer to VSP-60, "Removal and Installation".
NO >> Repair harness or connector. G
VSP

THE CHARGE SOUND DOES NOT SOUND
THE CHARGE SOUND DOES NOT SOUND
• The plug-in detection sound does not sound when the charge connector is correctly connected.
• The charge acceptance sound does not sound when the charge is accepted.
NOTE:
During quick charge, the plug-in detection sound does not operate.

2. Check the charge pulse input signal. Refer to VSP-46, "Component Function Check".
NO >> GO TO 2.
2.CHECK CHARGE PULSE SIGNAL CIRCUIT
Check charge pulse signal circuit. Refer to VSP-46, "Diagnosis Procedure".
NO >> GO TO 3.
3.PERFORM SELF-DIAGNOSIS OF VCM
Perform “Self Diagnostic Result” of “VCM”, and repair or replace malfunctioning parts.
>> Refer to EVC-51, "CONSULT Function".

THE POWER SWITCH OPERATION SOUND DOES NOT SOUND
THE POWER SWITCH OPERATION SOUND DOES NOT SOUND
A
The power switch operation sound does not sound when the power switch is operated. B
1.CHECK POWER SWITCH INPUT SIGNAL C

2. Check the power switch input signal. Refer to VSP-48, "Component Function Check".
Is the inspection result normal? D
NO >> GO TO 2.
E
2.CHECK POWER SWITCH SIGNAL CIRCUIT
Check power switch signal circuit. Refer to VSP-48, "Diagnosis Procedure".
Is the inspection result normal? F
YES >> GO TO 3.
3.CHECK POWER SWITCH G
Check power switch. Refer to VSP-49, "Component Inspection".

Is the inspection result normal? H
NO >> Replace power switch.
I
VSP

NORMAL OPERATING CONDITION
NORMAL OPERATING CONDITION
APPROACHING VEHICLE SOUND FOR PEDESTRIANS(VSP) SYSTEM
APPROACHING VEHICLE SOUND FOR PEDESTRIANS(VSP) SYSTEM : Descrip-
tion INFOID:0000000006959851
• The VSP during forward driving fades out and stops operating when the vehicle stops [vehicle speed 0 km/h
(0 MPH) is detected].
• The VSP during reverse driving continues to operate when the vehicle is stopped.
START UP SOUND SYSTEM
START UP SOUND SYSTEM : Description INFOID:0000000006959852
The power switch operation sound may not be able to respond normally if the power switch is pressed quickly.
CHARGE SOUND SYSTEM
CHARGE SOUND SYSTEM : Description INFOID:0000000006959853
• The charge sound system operates when the power switch is OFF.
• During quick charge, the plug-in detection sound does not operate.

< REMOVAL AND INSTALLATION >
REMOVAL AND INSTALLATION A
APPROACHING VEHICLE SOUND FOR PEDESTRIANS (VSP) CONTROL
UNIT
B
Removal and Installation INFOID:0000000006959854
REMOVAL C
1. Remove the glove box cover assembly. Refer to IP-13, "Removal and Installation".
2. Remove the VSP control unit connector.
D
3. Remove screw (A), and then remove the VSP control unit (1).
G
JSMIA0554ZZ
INSTALLATION
Install in the reverse order of removal. H
VSP

START UP SOUND SPEAKER
START UP SOUND SPEAKER
REMOVAL
1. Remove the instrument lower panel LH. Refer to IP-13, "Removal and Installation".
2. Remove screws (A), and then remove the start up sound
speaker (1).
JSMIA0555ZZ
INSTALLATION
Install in the reverse order of removal.

A
Exploded View INFOID:0000000006959856
DIASSEMBLY B
JSMIA0557ZZ
H
1. Bracket 2. VSP speaker
: N·m (kg-m, ft-lb)
I
REMOVAL J
1. Remove the front bumper. Refer to EXT-12, "Removal and Installation".
2. Remove the VSP speaker connector.
3. Remove bolts (A), and then remove the VSP speaker (1). K
VSP
JSMIA0556ZZ N
INSTALLATION
O
Disassembly and Assembly INFOID:0000000006959858
DIASSEMBLY P
Remove screws, and then remove bracket.
ASSEMBLY
Assemble in the reverse order of disassembly.

APPROACHING VEHICLE SOUND FOR PEDESTRIANS (VSP) OFF
SWITCH
Exploded View INFOID:0000000006959859
REMOVAL
JSMIA0559ZZ
1. VSP OFF switch 2. Switch assembly
REMOVAL
1. Remove the instrument lower panel LH. Refer to IP-13, "Removal and Installation".
2. Remove screws (A), and then switch assembly (1).
JSMIA0558ZZ
3. Disengage the pawls to remove the VSP OFF switch.

INSTALLATION

VSP PDF

Uploaded by

Copyright:

Available Formats

VSP PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

VSP PDF

Uploaded by

Copyright:

Available Formats

DRIVER CONTROLS

APPROACHING VEHICLE SOUND FOR PEDESTRI-

Revision: 2010 November VSP-1 LEAF

CHARGE PULSE SIGNAL CIRCUIT ................. 46 START UP SOUND SYSTEM ................................... 58

Revision: 2010 November VSP-2 LEAF

Revision: 2010 November VSP-3 LEAF

Revision: 2010 November VSP-4 LEAF

Tool name Description

Revision: 2010 November VSP-5 LEAF

Instrument lower panel LH reverse

Revision: 2010 November VSP-6 LEAF

Start Up Sound Speaker INFOID:0000000006959793

• The start up sound speaker is located on the reverse side of instru- M

Revision: 2010 November VSP-7 LEAF

2. : VSP OFF indicator

Approaching Vehicle Sound For Pedestrians (VSP) OFF Indicator INFOID:0000000006959796

VSP system status VSP OFF indicator

Revision: 2010 November VSP-8 LEAF

Revision: 2010 November VSP-9 LEAF

Revision: 2010 November VSP-10 LEAF

START UP SOUND SYSTEM B

START UP SOUND SYSTEM : System Description INFOID:0000000006959800

Signal name SIgnal path

Power switch signal Power switch VSP control unit

Revision: 2010 November VSP-11 LEAF

Signal name SIgnal path

READY EFFECT SOUND

Revision: 2010 November VSP-12 LEAF

Signal name SIgnal path

Power switch signal

APPROACHING VEHICLE SOUND FOR PEDESTRIANS(VSP) SYSTEM

Revision: 2010 November VSP-13 LEAF

Revision: 2010 November VSP-14 LEAF

Signal name Signal path

Signal name SIgnal path G

Revision: 2010 November VSP-15 LEAF

Signal name Signal path

Signal name Signal path

VSP speaker signal VSP control unit VSP speaker

Revision: 2010 November VSP-16 LEAF

Signal name Signal path VSP

Signal name Signal path

Revision: 2010 November VSP-17 LEAF

VSP SYSTEM OPERATION STOP AND RESUME FUNCTION

VSP system status VSP OFF indicator

Signal name Signal path

Revision: 2010 November VSP-18 LEAF

Signal name Signal path A

CHARGE SOUND SYSTEM

CHARGE ACCEPTANCE SOUND

Revision: 2010 November VSP-19 LEAF

Signal name Signal path

Charge pulse signal VCM VSP control unit

Signal name Signal path

VSP speaker signal VSP control unit VSP speaker

Revision: 2010 November VSP-20 LEAF

Test mode Function C

Monitor item Display Description

Revision: 2010 November VSP-21 LEAF