Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 227 views

    Concrete Pier (Isolated Deep Foundation) Design Based On ACI 318-14

    Uploaded by

    Matiur Rahman Basum
    This document summarizes the design of a concrete pier foundation with a diameter of 24 inches and length of 10 feet. The pier is designed to support an axial load of 100 kips, a moment load of 200 foot-kips, and a shear load of 20 kips. The design checks the pier limitations, flexural and axial capacity, and shear capacity according to ACI 318-14 code requirements. The analysis found the pier design to be adequate and satisfactory for all limit states checked.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    Concrete Pier (Isolated Deep Foundation) Design Based On ACI 318-14

    Uploaded by

    Matiur Rahman Basum
    227 views6 pages
    This document summarizes the design of a concrete pier foundation with a diameter of 24 inches and length of 10 feet. The pier is designed to support an axial load of 100 kips, a moment load of 200 foot-kips, and a shear load of 20 kips. The design checks the pier limitations, flexural and axial capacity, and shear capacity according to ACI 318-14 code requirements. The analysis found the pier design to be adequate and satisfactory for all limit states checked.

    Original Description:

    dada

    Original Title

    Concrete Pier

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes the design of a concrete pier foundation with a diameter of 24 inches and length of 10 feet. The pier is designed to support an axial load of 100 kips, a moment load of 200 foot-kips, and a shear load of 20 kips. The design checks the pier limitations, flexural and axial capacity, and shear capacity according to ACI 318-14 code requirements. The analysis found the pier design to be adequate and satisfactory for all limit states checked.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    227 views6 pages

    Concrete Pier (Isolated Deep Foundation) Design Based On ACI 318-14

    Uploaded by

    Matiur Rahman Basum
    This document summarizes the design of a concrete pier foundation with a diameter of 24 inches and length of 10 feet. The pier is designed to support an axial load of 100 kips, a moment load of 200 foot-kips, and a shear load of 20 kips. The design checks the pier limitations, flexural and axial capacity, and shear capacity according to ACI 318-14 code requirements. The analysis found the pier design to be adequate and satisfactory for all limit states checked.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 6

    PROJECT :

    CLIENT :
    JOB NO. : DATE :
    Concrete Pier (Isolated Deep Foundation) Design Based on ACI 318-14

    INPUT DATA & DESIGN SUMMARY


    CONCRETE STRENGTH fc ' = 3 ksi
    VERT. REBAR YIELD STRESS fy = 60 ksi
    PIER DIAMETER D = 24 in
    PIER LENGTH L = 10 ft
    FACTORED AXIAL LOAD Pu = 100 k
    FACTORED MOMENT LOAD Mu = 200 ft-k
    FACTORED SHEAR LOAD = Vu 20 k
    PIER VERT. REINF. 8 # 7
    SEISMIC DESIGN (ACI 18.13.4) ? Yes
    LATERAL REINF. OPTION (0=Spirals, 1=Ties) 1 Ties
    LATERAL REINFORCEMENT # 4 @ 6 in o.c.
    (spacing 3.0 in o.c. at top end of 10.0 ft.)
    (2015 IBC 1810.3.9 & ACI 18.13.4)

    THE PIER DESIGN IS ADEQUATE.

    ANALYSIS
    CHECK PIER LIMITATIONS
    fc' = 3 ksi > 2.5 ksi
    [Satisfactory] (2015 IBC Table 1808.8.1)
    D= 24 in > MAX( L / 12 , 24 in)
    [Satisfactory] (2015 IBC 1810.2.2)

    CHECK FLEXURAL & AXIAL CAPACITY


    2 0.85 f '
    C 
    o  , Ec  5
    Ec

        

    0.85 f
    '
    C
    2  c   
    f C     o   
     '

    0.85 f C , for  c 

     s E s , for  s  

    f 
    S
     f , for  s   y
     y

    f Pmax =F f [ 0.85 fc' (Ag - Ast) + fy Ast] = 743.26 kips., (at max axial load, ACI 318-14 22.4)
    where F = 0.8 , ACI 318-14 22.4.2
    f = 0.65 (ACI 318-14 21.2) >
    Ag = 452 in2. Ast = 4.80 in2.

    1000

    AT COMPRESSION ONLY
    800
    AT MAXIMUM LOAD
    600
    AT 0 % TENSION
    f Pn (k) AT 25 % TENSION
    400 AT 50 % TENSION
    AT  t = 0.002
    200 AT BALANCED CONDITION
    AT  t = 0.005
    0
    0 50 100 150 200 250 AT FLEXURE ONLY
    -200 AT TENSION ONLY

    -400

    f Mn (ft-k)
    a = Cbb1 = 10 in (at balanced strain condition, ACI 21.2.2)
    0.75 + ( t - 0.002 ) (50), for Spiral
    f=  0.656 (ACI 318-14 21.2)
    0.65 + ( t - 0.002 ) (250 / 3), for Ties

    where Cb = d c / (c + s) = 12 in t = 0.002069 c =


    d = 20.06 in, (ACI 20.6) b1 = 0.85 ( ACI 318-14 22.2.2.4.3)
    f Mn = 0.9 Mn = 174 ft-kips @ Pn = 0, (ACI 318-14 21.2) ,& t,max = 0.004, (ACI 318-14, Sec. 21.2.3)
    f Mn = 234 ft-kips @ Pu = 100 kips > Mu
    rmax = 0.08 (ACI 318-14 10.6) rprovd = 0.011
    rmin = 0.005 (2015 IBC 1810.3.9.4.2)

    CHECK SHEAR CAPACITY


    f Vn = f (Vs + Vc) = 86 kips, (ACI 318-14 22.5)
    > Vu [Satisfactory]
    where f = 0.75 (ACI 318-14 21.2)
    A0 = 316 in2. Av = 0.40 in2. fy = 60
    Vc = 2 (fc') A0 =
    0.5
    34.6 kips, (ACI 318-14 22.5)
    Vs = MIN (d fy Av / s , 8 (fc')0.5A0) = 80.3 kips, (ACI 318-14 22.5.1)
    smax = 10.5 (2015 IBC 1810.3.9.4.2) sprovd = 6
    smin = 1
    rs = 0.12 fc' / fyt = 0.006 < rs,provd = 0.008 [Satisfactory] (ACI 318-14 18.13.4.3 & 18.7.5.1
    PAGE :
    DESIGN BY :
    REVIEW BY :


    2 0.85 f '
    C  , E c  57 f
    '
    , E s  29000ksi
    C
    Ec
           2

    0.85 f
    '
    C
    2  c    c   , for 0   c   o
        o    o  
     '

    0.85 f C , for  c   o

     s E s , for  s   y


     f , for  s   y
     y

    CI 318-14 22.4)
    Pu [Satisfactory]

    f Pn (kips) f Mn (ft-kips)
    MPRESSION ONLY 743 0
    IMUM LOAD 743 108
    639 161
    527 198
    432 215
    288 222
    ANCED CONDITION 282 224
    96 234
    0 174
    -259 0
    (cont'd)

    0.003
    8-14 22.2.2.4.3)
    I 318-14, Sec. 21.2.3)

    [Satisfactory]

    [Satisfactory]

    ksi

    in
    [Satisfactory]
    8-14 18.13.4.3 & 18.7.5.1)

    You might also like