Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 41 views

    Membrane Element SWC - 2540: Performance

    Uploaded by

    Ashish Gulrandhe
    The membrane element is a spiral wound composite polyamide membrane with an active area of 25.5 square feet. It can process 625 gallons per day of permeate with a salt rejection of at least 99.0%. The membrane has an operating pressure up to 1,000 pounds per square inch, temperature up to 113 degrees Fahrenheit, and pH range of 2-11. It was tested under conditions of 32,000 ppm NaCl solution, 800 psi pressure, and 77 degrees F temperature.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Membrane Element SWC - 2540: Performance

    Uploaded by

    Ashish Gulrandhe
    41 views1 page
    The membrane element is a spiral wound composite polyamide membrane with an active area of 25.5 square feet. It can process 625 gallons per day of permeate with a salt rejection of at least 99.0%. The membrane has an operating pressure up to 1,000 pounds per square inch, temperature up to 113 degrees Fahrenheit, and pH range of 2-11. It was tested under conditions of 32,000 ppm NaCl solution, 800 psi pressure, and 77 degrees F temperature.

    Original Description:

    2540 RO datasheet

    Original Title

    SWC - 2540

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The membrane element is a spiral wound composite polyamide membrane with an active area of 25.5 square feet. It can process 625 gallons per day of permeate with a salt rejection of at least 99.0%. The membrane has an operating pressure up to 1,000 pounds per square inch, temperature up to 113 degrees Fahrenheit, and pH range of 2-11. It was tested under conditions of 32,000 ppm NaCl solution, 800 psi pressure, and 77 degrees F temperature.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    41 views1 page

    Membrane Element SWC - 2540: Performance

    Uploaded by

    Ashish Gulrandhe
    The membrane element is a spiral wound composite polyamide membrane with an active area of 25.5 square feet. It can process 625 gallons per day of permeate with a salt rejection of at least 99.0%. The membrane has an operating pressure up to 1,000 pounds per square inch, temperature up to 113 degrees Fahrenheit, and pH range of 2-11. It was tested under conditions of 32,000 ppm NaCl solution, 800 psi pressure, and 77 degrees F temperature.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Membrane Element SWC - 2540

    3
    Performance Permeate Flow: 625gpd (2.4 m /d)
    Salt Rejection: 99.4 % (99.0 % minimum)

    Type Configuration: Spiral Wound


    Membrane Polymer: Composite Polyamide
    2
    Membrane Active Area: 25.5 ft

    Application Data* Maximum Applied Pressure: 1,000 psig (6.9 MPa)


    Maximum Chlorine Concentration: < 0.1 PPM
    Maximum Operating Temperature: 113° F (45°C)
    pH Range; Continuous (Cleaning): 2-11 (1-13)*
    Maximum Feedwater Turbidity: 1.0 NTU
    Maximum Feedwater SDI (15 mins): 4.0
    Maximum Feed Flow: 6 GPM (23 l/m)
    Minimum Ratio of Concentrate to
    Permeate Flow for any element: 5:1
    Maximum Pressure Drop for Each Element: 15 psi

    * The limitations shown here are for general use. For specific projects, operating at more conservative values may
    ensure the best performance and longest life of the membrane. See Hydranautics Technical Bulletins for more detail
    on operation limits, cleaning pH, and cleaning temperatures.

    Test Conditions Elements are wet tested for quality assurance using the following conditions:

    32000 PPM NaCl solution


    800 psi (5.5 MPa) Applied Pressure
    77 °F (25 °C) Operating Temperature
    10% Permeate Recovery
    6.5 – 7.0 pH Range
    (Data taken after 30 minutes of operation)

    A, inches (mm) B, inches (mm) C, inches (mm) Weight, lbs. (kg)


    40.0 (1016) 2.4 (61) 0.75 (19.1) 4 (1.8)

    Core tube extension = 1.10” (27.9 mm)

    Notice: Minimum permeate flow for individual elements is 15 percent below listed flow. All membrane elements are supplied with a brine seal and o-rings. Most elements are
    packaged dry, sealed in polyethylene bags, and shipped in a cardboard box. Some elements are sealed in polyethylene bags containing less than 1.0% sodium meta-bisulfite
    solution and shipped in a cardboard box.

    Hydranautics believes the information and data contained herein to be accurate and useful. The information and data are offered in good faith, but without guarantee, as conditions
    and methods of use of our products are beyond our control. Hydranautics assumes no liability for results obtained or damages incurred through the application of the presented
    information and data. It is the user’s responsibility to determine the appropriateness of Hydranautics products for the user’s specific end uses.
    1/28/15

    Hydranautics Corporate: 401 Jones Road, Oceanside, CA 92058


    1-800-CPA-PURE Phone: 760-901-2500 Fax: 760-901-2578 info@hydranautics.com

    You might also like